Installing SAP 4.6B with existing database

Good evenning.
I need to install SAP 4.6B with existing database in SQL Server 2003.
How can I do this installation?.
Can you send me many guide?
Best regards.
Luis Gomez.

According to
http://service.sap.com/mcod
--> Availibility
4.6B is not supported (too old).
Markus

Similar Messages

SAP BO Installation with Oracle Database

Hello all,
My client uses SAP R/3 with Oracle database. Now we have to install Business Objects on another machine.
I've read the documentation on Installing Procedures but there are some questions still not clarified.
1. Do I have to install Oracle in the new machine?
2. If not, can I connect BOBJ to the database of the SAP R/3 Server?
3. If I want to have three systems (Like in R/3, Productive, Tests and Development) do I have to install BOBJ in different machines?
Thanks in advance,
Regards

1. you dont have to insall Oracle database at the BO machine side, you just need any database to hold the BO repository.
2. you cant connect directly using BO, only Crystal reports can connect directly to R3 database, you need to have a BW in between.
extract your data into the BW, and let BO connect to BW using the BO integration kit for SAP solutions.
3. no you dont have to have 3 different machines, using one BO machine you connect to them all, but you may need build a BO environment, (Development, Production servers)
good luck

10GR1 GridControl with existing database fails

Can anyone explain how the install with existing database works. I have tried to reason through it, but it always fails because it cannot find an oradata file in the directory where I am installing the software.... This makes no sense....
thanks,

You have to create the $ORACLE_HOME/oradata directory ahead of time. The installer
warns you that the directory exists, but lets you continue and specify the locations where
you would like to place the repository data files.
For more information, check out this MetaLink forum message:
http://metalink.oracle.com/metalink/plsql/for_main.expandThreads?p_thread_id=600102.992&p_forum_id=93&p_after_post=N&p_forum_scope=a&p_message_id=600102.992&p_forum_time=7&p_myThread=1
or this other forum message:
Re: 10g Grid Control on Solaris box

Problem while reconfiguring OIM 11g with existing Database

Hello,
I had some issues with my OIM 11g instance, so i reconfigured it by deleting user_projects folder,before deleting i took backup of config folder as i wanted to
configure with existing database.
Following steps were performed for reconfiguring OIM11g:-
1)Ran config.sh from <Middleware>/Oracle_IDM1/common/bin
2) Copied .xldatabasekey file to newly created domain
3)Ran config.sh from <Middleware>/Oracle_IDM1/bin
Then tried to start AdminServer, it showed status as running but with errors like
java.lang.NoClassDefFoundError: Could not initialize class oracle.dfw.impl.common.TempFileManager
at oracle.dfw.spi.portable.PortableDiagnosticsFrameworkProvider.init(PortableDiagnosticsFrameworkProvider.java:120)
Then tried to start OIM server , it showed status as running but with error as
oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
Password for .xldatabasekey is not seeded in CSF.
Then i tried to cofigure domain again & this time i didnt select Oracle Identity Manager from Select domain source & checked AdminServer & it was running without any errors, but when i select Oracle Identity Manager from Select domain source then i get above problems.
Can anyone provide pointers about how to resolve this issue .
Thank-You
Rahul Shah

Dear Rahul,
I got the same errors:
./admin/IDMDomain/mserver/IDMDomain/servers/wls_oim1/logs/wls_oim1.log
####<Jan 27, 2013 10:58:09 PM CET> <Error> <Deployer> <server02> <wls_oim1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <aa66ef4907f1903f:4c6a3b0:13c7e03232f:-8000-0000000000000003> <1359323889050> <BEA-149205> <Failed to initialize the application 'oim [Version=11.1.1.3.0]' due to error oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.
oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.could you explain, how did you sort out it, please? For example point 2 did you create one more domain?
Best regards,
Lain

Install SAP Solution Manager with DEV instance in the same server (MCOD)

Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
The only option i am confussed is
MS SQL Server
Database reuse o - New Database (DBSID = SAPSID)
o - Use Existing Database
Database ID (DBSID)
Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
Kind Regards

Hi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
Database ID (DBSID) .
Regards,
Darwin C.

Installing SAP R/3 with SQL Server 2005..

Hi,
Microsoft is about to release "SQL 2005" in Nov05. Has anybody in here thought of installing/upgrading SAP on MS-SQL's latest version of the database server. On doing some research on the net I noticed that Microsoft has already upgraded their SAP R/3 environment to the beta edition of SQL Server 2005. I did not find any information on SAP having certified SQL Server 2005 yet.
Do we have to wait till ECC6.0 or whatever the new version of ECC would be to leverage the SQL Server 2005 D/b ?
Any thoughts/information on the readiness of SQL Server 2005 for SAP R/3 would be appreciated.
Jay

Hi Jay,
Past experience says SAP won't support a new platform (e.g. DB, OS, etc) until they have had a chance to test it. Your official SAP document for what is supported is in the Product Availability Matrix. http://service.sap.com/pam
With that said, that doesn't mean that you can't try it out. Of course not in a test environment. You get some very good learning experiences from trying. But don't enter a customer message about a non supported platform.
Good luck,
John

Error installing sap 2004s SR1 with DB2 and AIX

Hello Gurus,
I am installing MySap 2004s SR1 with DB2 and IBM AIX.
I am facing the following error :
<b>ERROR 2006-11-09 02:21:22
MDB-01052 Could not connect to database: DB6CliConnectUser(): [IBM][CLI Driver] SQL30082N Attempt to establish connection failed with security reason "1" ("PASSWORD EXPIRED"). SQLSTATE=08001
ERROR 2006-11-09 02:21:22
FCO-00011 The step CreateNodegroups with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateNodegroups|ind|ind|ind|ind|17|0|CreateNodegroups was executed with status ERROR .</b>
Please help me out.
Thanks,
Chandra Sekhar Reddy.

Hi,
... ("PASSWORD EXPIRED") ...
Try to log on OS level with db2<sid>, <sid>adm and sap<sid>/sapr3 (not from root level, but rather by providing a username / pw combination).
Most probably the password on OS level has expired.
Please be aware, that you have to use dscdb6up to change passwords for <sid>adm and sap<sid>.
HJ

Can we install BPC 5.1 with Oracle database ?

Dear Experts,
I need to install SAP BPC 5.1 with Oracle Database.
Is it possible ?
And please tell me what are the systems requirements to install SAP BPC.
Thanks & Regards,
Satish

All these questions are answered in the InstallGuide.
Have a look at service.sap.com/swdc
--> Downloads -> Installation & Guides -> search Application by Index...then you are on the right track...
Cherrio,
Christian

Problems Installing Oracle Metadata Repository into Existing Database

Folks,
I'm slowly going through the process of installing the Metadata Repository into a 10g database, using RepCA I've managed to determine all the DB parameters required for setting etc. The only thing RepCA now reports is missing is the Ultrasearch schema & packages.
I've copied the ultrasearch dirs from the RepCA distribution and placed them in my $ORACLE home dir, I've also attempted to run the admin install script 'wk0setup.sql' which throws out several errors listed below. If anyone has successfully gone through this process on Solaris I would love to hear your about your experience & advice.
Error 1. =================================================
User is WKSYS
... loading ultrasearch_db.jar
call sys.dbms_java.loadjava('-v -f -r -s -g PUBLIC $ORACLE_HOME/ultrasearch/lib/ultrasearch_db.jar', '((* wksys) (* public))')
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
oracle.aurora.server.tools.loadjava.ToolsError: Error during loadjava: Failures
occurred during processing. Check trace file for details
Error 2 (File Doesn't exist at all) ==============================
SP2-0310: unable to open file "/oracle/1020a/ultrasearch/admin/wk0launchq.pkh"
Error 3 (Again the file doesn't exist at all) ========================
SP2-0310: unable to open file "/oracle/1020a/ultrasearch/admin/wk0launchq.plb"
===========================================================
Regards
Austin

Hi guys,
I have used copy of that package from Oracle Identity Management installation, version 10.1.4.0.1 and have been able to complete manual Ultra Search installation. It's valid in dba_registry. After that I did run RepCA and metadata schemas have been created successfully in existing database, version 10.2.0.2. Be careful about database version, only 10.2.0.2 is certified with Oracle Identity management, so you need to run patch for upgrade to 10.2.0.2.
Hope this helps.
Dali
Message was edited by:
dallyz7

Installing OBISEONE on machine with already database installed

Hi all,
I need to install OBISEONE software on a machine where I've already got an oracle database (enterprise edition 10gr2) installed.
I'm looking for a guide on how to install on a machine with an existing home! Anyone has any clues?
Install in a completely different folder and home?
Thanks in advance for any hints

Two things -
1)OBISE1 comes with oracle 10 R2
2)OBISE1 does not work well on servers which already have an oracle home and take my word on it , it sounds pretty dumb but I tried this at a client and Oracle got back to me after three days suggesting I choose a virgin machine to install OBISE1 , try it but for me installation froze as it tried to create a listner for the bundled DB.Also if you want to access any help , its not metalink but you have to go through metalink3.
Regards,
Mohammad Farhan Alam

Error while installing EnterpriseManager grid control on existing database

Hi All,
While installing Oracle EnterpriseManager grid control on existing database
it asked for deconfig an existing database control and while doing this we got an error as follows
Getting temporary tablespace from database...
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ceserp.computechcorp.net)(PORT=1543)))(CONNECT_DATA=(SERVICE_NAME=GRID))): ORA-12514: TNS:listener does not currently know of service requested in connect descriptor (DBD ERROR: OCIServerAttach)
Mar 15, 2010 11:14:10 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: stty: standard input: Invalid argument
stty: standard input: Invalid argument
stty: standard input: Invalid argument
stty: standard input: Invalid argument
Mar 15, 2010 11:14:10 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /u01/oracle10g_grid/DB10.2.0/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ceserp.computechcorp.net)(PORT=1543)))(CONNECT_DATA=(SERVICE_NAME=GRID))) -repos_user SYSMAN -action drop -verbose -output_file /u01/oracle10g_grid/DB10.2.0/cfgtoollogs/emca/GRID/emca_repos_drop_2010-03-15_11-14-10-PM.log
Mar 15, 2010 11:14:10 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error dropping the repository
Mar 15, 2010 11:14:10 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /u01/oracle10g_grid/DB10.2.0/cfgtoollogs/emca/GRID/emca_repos_drop_<date>.log for more details.
Mar 15, 2010 11:14:10 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error dropping the repository
Refer to the log file at /u01/oracle10g_grid/DB10.2.0/cfgtoollogs/emca/GRID/emca_2010-03-15_11-13-15-PM.log for more details.
Mar 15, 2010 11:14:10 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error dropping the repository
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:183)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:134)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:171)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:486)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1142)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:470)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:419)
please help on this issue
Thanks

Based on the error below:
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ceserp.computechcorp.net)(PORT=1543)))(CONNECT_DATA=(SERVICE_NAME=GRID))): ORA-12514: TNS:listener does not currently know of service requested in connect descriptor (DBD ERROR: OCIServerAttach)
It looks like the installer can't connect to your existing database.
Can you ensure that your listener is servicing the already existing database.
lsnrctl status -> will list services
Make sure the database you want to use as your repository is there.

SAP Kernel update with HANA DATABASE

Dear experts,
I am planning to update the kernel with HANA database. It is my first time that I apply a kernel with HANA and for that reason I want to be sure everything is properly planned. I have updated kernel with Oracle databases and my biggest doubt is if I have to do something in the database, what would it be?
I have looking for any note that help me with a step by step but I couldn't find it. In that order I will ask you based on your own experiences.
Current Kernel is 742 PL28, I am planning to update to PL 101.
I appreciate any comments or suggestions,
Best regards,
DanielO

Dear Reagan,
As you told, the kernel was applied and I had no issues. I appreciatte your help.
Best regards,
DanielO

Installation with Existing Database Fails

We're installing SCVMM 2012 R2 and upgrading an existing 2012 R2 CU4 database. The installation fails after running for about 30 minutes with these lines in the SetupWizard.log
03:53:43:Failed sql script: Threw Exception.Type: Microsoft.VirtualManager.DB.CarmineSqlException, Exception.Message: Unable to connect to the VMM database because of a general database failure.
Ensure that the SQL Server is running and configured correctly, then try the operation again.
03:53:43:StackTrace:   at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.Setup.DBConfigurator.ExecuteScript(SqlContext ctx, String fileName)
03:53:43:InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Incorrect syntax near 'MERGE'. You may need to set the compatibility level of the current database to a higher value to enable this feature. See help for the SET COMPATIBILITY_LEVEL
option of ALTER DATABASE.
Must declare the scalar variable "@error".
Must declare the scalar variable "@error".
03:53:43:InnerException.StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
03:53:43:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.DatabaseConfigurationException, Exception.Message: The Virtual Machine Manager database can not be upgraded.
The Virtual Machine Manager database SCVMM2008Prod was not upgraded. Try a new database and run Setup again.
Has anyone seen this before? The SQL is remote but is reachable.
Orange County District Attorney

We have to dig deeper on this one. Can you check the SQL errorlogs for related information?
You must verify that the databases is working, have enough space, is healthy etc.
The logs should tell you if everything is allright.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How to Create new database (copy all table with data excluding 2 table )with existing database.

Please follow the scenario:
using C#
1) current database file name is DB20122013.
when user click on new year button
2)Create backup copy of current database
3)New database should create with all table(excluding table "Dailytemp" and "DailyMain") with data and database name as DB20132014.
Musakkhir Sayyed.

Hi,
I hope, below stored procedure is useful for your scenario.
CREATE PROC Create_New_Database
( @DBNAME VARCHAR(550)
)AS
Test : Exec [Create_New_Database] @DBNAME='DB20122013'
BEGIN TRY
SET NOCOUNT ON
DECLARE @sql VARCHAR(MAX), @DBNAME_NEW VARCHAR(550),@num int
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME) AND ISNUMERIC(RIGHT(@DBNAME,4))=1
BEGIN
SELECT @num= RIGHT(@DBNAME,4)
SELECT @DBNAME_NEW='DB'+CAST(@num AS VARCHAR(10))+''+CAST(@num+1 AS VARCHAR(10))
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME_NEW)
BEGIN
SELECT @DBNAME_NEW+' database already exists'
END
ELSE
BEGIN
SET @sql='USE '+@DBNAME+' '+' backup database '+@DBNAME+' to disk = ''C:\'+@DBNAME+'.bak'' '
+' restore database '+@DBNAME_NEW+' from disk = ''C:\'+@DBNAME+'.bak'''
+' with move '''+@DBNAME+''' to ''C:\'+@DBNAME+'_data.mdf'' ,
move '''+@DBNAME+'_log'' to ''C:\'+@DBNAME+'_log.log'''
EXEC (@sql)
SET @sql=''
SET @sql=' USE '+@DBNAME_NEW+' IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''Dailytemp'')
BEGIN DROP TABLE Dailytemp END IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''DailyMain'')
BEGIN DROP TABLE DailyMain END '
EXEC (@sql)
END
END
ELSE
BEGIN
SELECT 'Database is now found or Database name does not mach the scenario'
END
SET NOCOUNT OFF
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000)
DECLARE @ErrorSeverity INT
DECLARE @ErrorState INT
SELECT @ErrorMessage = ERROR_MESSAGE(), @ErrorSeverity = ERROR_SEVERITY(),@ErrorState = ERROR_STATE()
RAISERROR (@ErrorMessage,@ErrorSeverity,@ErrorState )
END CATCH;
GO
Regards,
RAMBHARATH

How to install OEM 10g using an existing database on another host

Hi,
I've created a 10g database (on host solaris_x86) which I like to use for the OEM 10G GC (on host linux_x86).
If I install OEM using existing DB, then the installer expect the database is running locally.
If I install OEM using new DB, then the installer complains that I've less then 1GB memory.
Does somebody know how to solve this?

Something is wrong ... Remote database works fine.
we are using Tru64 OMS against Windows DB.

Installing SAP 4.6B with existing database

Similar Messages

Maybe you are looking for