Installing SAP GRC AC 5.3 and 5.2 in same windows server

Hi All,
Is it possible to run both SAP GRC AC 5.3 and 5.2 on the same server? Basically for testing purpose prior to upgrade?
What would be the technical issues?
Regards,
Nagendran

Hi All,
We have a similar requirement:
We have WAS640AC5.2 running in a windows server connecing to backend landscape "A". We plan to install WAS700AC5.3 in this same server for backend landscape "B".
What i would like to know is WAS640AC5.2 & WAS700AC5.3 can exist together in the same server?
Regards,
Muruga

Similar Messages

  • Can we install Oracle 8i and 10g on the same windows server?

    I would like to install the Oracle server 8i and 10g on the same windows server? Is this possible.
    Forgive me if this question is already asked.
    Thanks in advance!
    Jay.

    WHICH Windows version? (There's more than one). It would be useful to be a little bit more precise (NT,2000,XP,2003, 32/64 bit) .
    For NT and 2000 it is possible to have both 8i and 10g, for XP and 2003 there's no support for 8i at all.

  • Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

    I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012.  Everything installs without error.  I have acquired a certificate for SCUP signing from the internal Enterprise CA.  I have
    verified the signing certificate has a 1024 bit key.  I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer.  When I attempt to publish a Flash update with Full content I receive the following
    error:
    2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
    I have redone the certificates three times with no luck.  I can import metadata, but any attempt to download content results in the verification error.
    TIA

    Hi Joyce,
    This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048.  Thank you for being my second set of eyes.
    I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
    and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
    2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
    Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect?  In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic." 
    No Flash updates in the ConfigMgr console are marked as downloaded.  I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works. 
    Comments and suggestions welcome.

  • HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

    Hi everyone,
    I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
    The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
    Details:
    Steps involved:
    1. Install
    Windows Server 2003 x64 SP2
    2. Install
    SQL Server 2005 x64 SP3
    3. Install Hyperion 11.1.2 for 64bit Modules:
    - Foundation
    - EPMA
    - Calculation Manager
    - Essbase
    - Planning
    4. Configure Hyperion Modules using DB SQL Server 2005 x64
    5. Install and Configure using DB SQL Server 2005 x64
    Oracle RCU for 64bit
    6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
    Result:
    Fails to start services for either Hyperion Products or Oracle BI.
    Anyone can provide correct steps?

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • Portal Drive Error--re-install SAP NW Portal Drive software and try again

    Dear Experts,
    Could you please let me know if there is any permanent fix for
    Portal Drive inconsistence behaviour.
    1.We use NW2004s SPS 13.
    2.After the installation of Portal Drive (version 4.5.6796 ) on an
    desktop, windows is not stable and must be restart (cold start).
    3. After the restart the problems still exists and only a
    deinstallation resolves the problem.
    4. Sometimes the problem occurs on connecting to a service,
    sometimes on disconnecting.
    Sometimes on starting windows, but before the load of Protal
    Drive.
    5."Presently we are getting error SAP NetWeaver Portal Drive is not installed or configured correctly.Please re-install SAP
    NetWeaver Portal Drive software and try again"
    6. If we uninstall it and reinstall, it is working fine.
    I wanted to know if there is any permanent fix for this inconsistance in Portal drive.
    Because i have received complaints from more than 9 users in this week.
    Really thanks for helping me
    Vishali.B

    Hey just a update, so even though apple said the HDD was fine because of the S.M.A.R.T status and it was been picked it would be fine I did not agree, took my iMac apart went out to the local computer shop picked up a cheap 1tb WD HDD and now the iMac is worked fine and smooth :-)
    So now I know that was the issue I can order a nice new SSD for the iMac and use the new HDD I got in an external case :-) just incase anyone had the same issue that's the fix. Buy a new HDD or SSD

  • Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

    Hi Guys,
    i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
    Hp device Model.:- hp pavilion g4 1303au
    Model no.:- 5c03213jsh
    network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
    Name: PCI Device
    Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
    Name: SM Bus Controller
    Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
    thanks,
    Amit Rai

    Hi:
    SMBus controller:
    Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install. 
    Download and unzip the file.
    Go to the device manager and click on the smbus controller needing drivers.  Click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
    Make sure the Include Subfolders box is checked and the driver should install.  Then reboot.
    Ethernet:  Download and install the 1st driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
    Card reader (PCI dev.):  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
    Wireless:  You will have to try the Vista driver for the Atheros wireless card...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
    Attachments:
    sp66185.zip ‏7 KB

  • Can I install Adobe Photoshop on my laptop and desktop using the same license?

    Can I install Adobe Photoshop on my Laptop and Desktop using the same License?
    Thanks!

    For Photoshop CC:
    You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
    If you install on a third computer, it will request you to de-activate on the other two computers.  You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
    -Pragya

  • If i purchase the PS, can i install it on both my PC and MAC at the same time?

    if i purchase the PS, can i install it on both my PC and MAC at the same time? I use the PC at home and MAC while on the road.

    yes, if you subscribe to cc (which included ps cs6, ps cc and ps cc 2014).
    no, if you purchase ps cs6.

  • Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

    Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
    http://www.youtube.com/watch?v=8mOuoIWzmdE
    Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain  as best I can and apologies from the start.
    It’s a bit of both Hyper-v and Server 2012R2. 
    I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
    examples.
    New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
    Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
    Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
    When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
    HostSwitchTeam for selection.  When installed it shows the Microsoft Network Multiplexor Driver as the only option. 
    Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
    Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
    Any help would be much appreciated.
    Paul
    Paul Edwards

    Hi P.J.E,
    >>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
    Nic 1,2 
    HostVMSwitchTeam
    Nic 3,4,5
             HostMgmtSwitchTeam
    >>The adapter Binding settings are:
    HostMgmtSwitchTeam
    V-Curric
    Nic 3
    Nic 4
    Nic 5
    V-Livemigration
    HostVMSwitch
    Nic 1
    Nic 2
    V-iSCSI
    V-HeartBeat
    Based on my understanding of the description , "HostMgmtSwitchTeam and
    HostVMSwitch " are teamed NIC .
    You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
    HostVMSwitch").
    V-Curric,
    V-Livemigration , V-iSCSI ,
    V-HeartBeat are just VNICs of host  (you can change their name then check if the virtual switch name will be changed )
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Can Bootcamp and Parallels share the same Windows applications and data?

    I'm looking at getting an Intel iMac which will let me throw away my old PC - Yeah!
    I will have a couple of Win apps that I will need to hang on to (Quicken - Quicken for Mac is horrible, but that's another tghread). Anyway, can Bootcamp and Parallels share the same Windows applications and data?
    My thought would be to allow my wife to access Quicken from Parallels and not have to reboot. She will only need lightweight access and the overhead of running virtualization wouldn't impact her. I, on the other hand, would want to occasionally boot natively into Windows and run the same application with the same datafile. Is this possible?
    Thanks and looking forward to joining the MacIntel world!

    Thanks for all of the freplies. I suspected that BootCamp and Parallels could not shar ethe same partition, but wanted to verify. To address some of the other posts:
    Re: Quicken vs MoneyDance - I looked at MoneyDance a while back and while it is comparable to Quicken for Mac, it isn't comparable to Quicken for Windows (ergo, Quicken for Mac isn't comparable to Quicken for Windows!). But, as I said, that is a topic for another thread!
    Re: Using Bootcamp/Parallels for only one app: I actually have several apps that I still need access to on Windows. I work with many business applications than only run/are supported on Windows as well as receive some complex Office documents which Office for Mac cannot handle. Quicken (for Windows 2007) was just the best example of a consumer app where I could see wanting access from both OS X and Windows.

  • Can we create graphic and text in the same window of smartform without using template?

    we create graphic and text in the same window of smartform without using template?

    Hi Kinjal,
    as far as i understand you are talking about a template which you can partitioned and in one part you wants to show your graphics and in other part you wants to print your text, the border of template shall remain invisible.
    If you wants to do it without using a template, you can do it as sujjested by Susmitha, but creating a template will provide you more flexibility that if you wants to change the attributes in future you can do it easily.

  • OLTP and OLAP databases on same SQL Server?

    Would you put OLTP and OLAP databases on same SQL Server or separate?
    I realize the ideal would be separate, but that means 2 expensive licenses instead of 1.  Most of our OLTP stuff happens during the day while OLTP processing happens at night (so good use of resources) if just 1 server.  Also, the disks that hold
    the files could have different allocations (small chunks for the OLTP disks, large for the OLAP disks).  Also, by being on the same database server, the OLTP data is immediately accessible for processing into the warehouse.
    Or, is it just a cardinal rule to never mix the two worlds as server completely different purposes?
    Thanks.

    Answer given in simillar below thread would help you for sure:
    MSDN Forum:
    Is keeping your OLAP and OLTP databases on the same server is considered bad practice?
    -Vaibhav Chaudhari

  • Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview"

    Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview" at
    http://aka.ms/xb9l0w
    Thanks -
    James McIllece

    Hi,
    Thanks for your good sharing.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Is ATG 9.x and 10.x compatible with Windows Server 2012?

    Is ATG 9.x and 10.x compatible with Windows Server 2012?

    No, its not supported. Only Window 8 is supported.
    Peace
    Shaik

  • Error installing sap 2004s SR1 with DB2 and AIX

    Hello Gurus,
    I am installing MySap 2004s SR1 with DB2 and IBM AIX.
    I am facing the following error :
    <b>ERROR 2006-11-09 02:21:22
    MDB-01052  Could not connect to database: DB6CliConnectUser(): [IBM][CLI Driver] SQL30082N  Attempt to establish connection failed with security reason "1" ("PASSWORD EXPIRED").  SQLSTATE=08001
    ERROR 2006-11-09 02:21:22
    FCO-00011  The step CreateNodegroups with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateNodegroups|ind|ind|ind|ind|17|0|CreateNodegroups was executed with status ERROR .</b>
    Please help me out.
    Thanks,
    Chandra Sekhar Reddy.

    Hi,
    ... ("PASSWORD EXPIRED") ...
    Try to log on OS level with db2<sid>, <sid>adm and sap<sid>/sapr3 (not from root level, but rather by providing a username / pw combination).
    Most probably the password on OS level has expired.
    Please be aware, that you have to use dscdb6up to change passwords for <sid>adm and sap<sid>.
    HJ

Maybe you are looking for