Installing SAP GUI 7.30 in windows server 2008 r2

Hi guys,
Need help in, which patch to be downloaded for SAP GUI 7.30 for windows.
We have installed EHP6 ERP 6.0, the next step is to install GUI.
So, we found that 50120297_6 SAP GUI 7.30 for windows is the GUI we are looking for & downloaded it.
There are some patches to be downloaded too. So, below are screenshot which contains patch list.
Please suggest us which patches to be downloaded. Correct me if anything we have done wrong.

Hi Rafikul,
Thanks for the reply.
Below is the screenshot of SAP Notes 66971,
which shows no patch detail's for Windows server 2008 r2
One question that:
Does we to install all patch from 0 to 8, or only latest patch number 8 is sufficient.

Similar Messages

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

Unable to Install JRUN 4 Updater 7 on windows server 2008 64 bit machine

Please help us on the error while installing jrun4, updater 7 on Microsoft Windows Server 2008 R2 Enterprise 64 bit operating system
The JVM installed on the machine is 32 bit.
I installed jrun on the machine successfully. When I try to add a web server using the web server configuration tool.
I get the below fatal windows error.
Windows package manager
Operation failed with 0x8007000B
An attempt was made to load a program with an incorrect format.
Please help....

Hi Charlie,
64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
I hope this was helpful.

Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!

Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support

Error coming while installing Cisco Prime 4.2 on Windows Server 2008 R2

Hi,
I'm trying to install Cisco Prime 4.2 on Windows Server 2008 R2. While initiating the installation, message box "Error: csv not found" appears, and the installation terminates.
Is there any csv template need to be copied at any location before hand?

Are you installaing LMS 4.2.4 directly ?
Looking at the error ,it looks like ...
If yes then you need to follow the below path:
The installation path of LMS 4.2.4 : LMS 4.2 > LMS 4.2.2 > LMS 4.2.4
Thanks-
Afroz
[Do rate the useful post]

Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008

Hi there,
Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
I had bunch of questions also asked in this Oracle forum like :
Step by Step PeopleSoft HRMS Installation from scratch.
Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
Hope it helps to newbie's in PeopleSoft Apps like me.
Regards,
Vishal Mody
Edited by: 897150 on Jan 25, 2012 10:11 AM
Edited by: 897150 on Jan 25, 2012 10:13 AM

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Install SAP GUI 7.20 on Windows terminal server

Hi,
I would like to install SAP GUI 7.20 on a Windows Terminal Server and configure it so that all users on the terminal server share a common configuration. As the installation is now all users have to define the systems in GUI the first time they start it, but I would like to do this globally. Is this possible?
Best regards,
Thor-Egil

> estimated 20 or more users who will be using the WTS to do their specific transaction. How much ram do we need to put in the WTS to handle 20 or more users?
This depends on what the users will do on that system. I suggest you contact the hardware vendor for a sizing of the machine.
> and follow up question, do you recommend using terminal servers?
It's an easy way to centralize the administration, you have got only one SAPGui installation.
Markus

Installing SAP GUI on 64-bit Windows 7 with 32-bit Office

Until about 6 months ago, 64-bit systems in my environment had 64-bit Office 2010 installed. That caused some problems with other applications, so I made the decision that, going forward, ALL systems would have 32-bit Office 2010 installed.
Apparently, it's taken 6 months, but I finally have a need to Install SAP GUI 7.20 Patch 6 on a 64-bit Windows 7 system with 32-bit Office 2010. It turns out, that doesn't work.
I receive this:
Not all package prerequisits [sic] are fulfilled
Outlook Client extension for the synchronization of SAPoffice calendar with Outlook calendar... No compatible version of Microsoft Outlook found.
I am assuming that since this same installation works on my 32-bit systems, that it is upset about my architecturally-mismatched Office.
Am I correct about the source for this problem? If so, is there anything I can do to make the GUI work in this environment?

Hi John,
Actually, there is no mismatch in having 32-bit Office installed on 64-bit Windows. In fact, this is probably the preferred environment. SAPGUI in general is much happier with 32-bit Office, especially older patches (by the way, 7.20 is no longer in support -- you should upgrade to 7.30).
The errors you're receiving are most probably related to lingering 64-bit components of Office on your workstation. We had the same situation in my office a while back, when we first started rolling out 64-bit Windows to a few users, and the PC techs mistakenly thought that meant they had to install 64-bit Office. That caused lots of problems, since 64-bit Office is incompatible with many things, not just SAPGUI, as you found. Correcting the error by simply reinstalling Office 32-bit resulting in workstations with some 64-bit and some 32-bit components, and that just made things worse. Systems where 32-bit Office was installed from the beginning (on 64-bit OS) had no problems at all.
So, what you're probably going to need to do is to uninstall all Office components (including Outlook, Visio, anything like that, not just Word and Excel), and also uninstall your SAPGUI, then reinstall 32-bit Office (with Outlook) from scratch, then reinstall your SAPGUI. This will probably clear up your problem.
Regards,
Matt

How to install bo xi 3.1 on windows server 2008 r2 sp1 (virtual machine )

HI GUYS --
operating system: I am trying to install Business Objects into a virtual computer which has a windows server 2008 R2 SP1 operating system. I installed version BO XI 3.1 and I also installed Service pack 3 and Service pack 4. I installed liveoffice usual way. Whenever I try to design xcelsius and dashboard, I got some errors. In order to fix these errors, I followed SAP notes step by step. However, It didnt help me at all. I also tried to install by looking at install guide and supported platform documents, but I get an error each time of doing that. I can write each error over here. I also opened a link over here. Check out the link please to see the errors how to display webi docs. in liveoffice?
My main question is this.
Are there anybody who works operating system windows server 2008 R2 SP1 and this installed into the virtual machine? If so, Is it worked by doing which installations exactly?
Note; Business Objects tools work very well (infoview, cmc, web intelligencei and the others work without problems at QAAWS BO XI 3.1, but they have been given cluster error at BO XI 3.1 SP3) . In addition, port server settings have been installed based on the installion guide. If you give me any information other than whatever I said, I appreciate that. I also point out something. If I dont get any message which I attached a sample when I try to operate life office. In this situation I cant see either my documets or web documents in infoview)
[http://imageshack.us/photo/my-images/3/sorunc.jpg/|http://imageshack.us/photo/my-images/3/sorunc.jpg/]

Hi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John

Which version of Java for SAP NetWeaver 7.02 in Windows Server 2008

Hi ,
     I want to install SAP NetWeaver 7.02 (not SP6) in Windows Server 2008 R2 x64, but I don't know which version of Java I should install first, I have downloaded the following four types of Java:
j2eesdk-1_4_02_2005Q1
j2sdk-1_4_2_09_windows_i586
j2re-1_4_2_19-windows-i586-p
j2sdk-1_4_2_19-windows-i586-p
    But, I don't know which type I should choose to install first.
    Thanks for help!

Hi Cathal,
    Thanks for your help!
    But the document of SAP installation says:
If you start sapinst the first time, you will be logged off your operating system and afterwards prompted for the installation directory of JRE 1.4.latest or 1.5.0_22 (tested).
Do not use 1.6.x! The installation will start, but not finish.
JRE 1.4.latest or 1.5.0_22 (tested): it means I should install j2re-1_4_2_19-windows-i586-p, is it right?

Installation Support of SAP Kernel Products on Vista / Windows Server 2008

one of the major design goals of Vista and Microsoft Server 2008 is to harden the operating system against unauthorized attacks from viruses, trojan horses etc.
The most important change in Vista/Windows Server 2008 (formerly longhorn) is: a process running under a user account which belongs to the local administrators group does not run with administrative priviledges as long the process is not elevated to the administrative level.
Elevation can be done by starting the process per Explorer using Run As Administrator or using special APIs, which are new in Vista. Programs started with Run as Administrator will not be able to start subprocesses elevated without additional changes (compared to Windows XP / Server 2003).
Security settings of many Windows system objects like Directories and Registry Hives etc are much more restrictive in Vista compared to Windows Server 2003 / XP. In some functions SAPinst tries to access registry keys and values for enumeration with full access which is no longer possible in Vista.
In other words: without code changes in SAPInst for Vista / Windows Server 2003 there will be no possibility to install a SAP System on these platforms.
If you do not have a SAP note stating the opposit or if you do not have a PAM (Product Availability Matrix) entry promising support for Vista / Windows Server 2008 the probability is about 99.9 percent (or even higher) that the installation will not run.
regards
Peter

> >>If you do not have a SAP note stating the opposit
> or
> but there is nothing with what I wrote: Note 1054740
> describes how to evaluate 7.00 based products.
...on Windows Longhorn (which will be your quoted Windows Server 2008)
> This version will work - but the rest - especially
> those ECC5 or 4.7 based IDES or MiniSAP systems or
> all that stuff which is widely copied through some
> unknown channels will not install.
yes, that's true.
I know of efforts porting MaxDB to Vista (there are some PTS'ses open) but generally one can say, that products below 7.00 are unlikely to work short term.
Markus

HOW TO INSTALL ODI 11g / OWB 11g IN WINDOWS SERVER 2008 R2 (64 BITS)

Hi everybody,
I have a serious problem.
Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
Thanks & Regards!

OWB 11G Will have been installed with the database, it now ships with 11G.
Check you are on a supported platform for design centre using the certification matrix.
Quick google search for you regards 0xc0000018 :
Problem in Lunching OWB Design Center

Can't install Adobe Reader using Firefox on Windows Server 2008 R2

I am hoping someone can kindly help me out here.
Using Firefox I went to http://get.adobe.com/reader/ and clicked the download button and received the Getplus add-on to Firefox.
When Firefox restarts the getplus window opens but sits there and does nothing with the window remaining blank for ever..
Each time I try it is the same
I am logged into Windows Server 2008 R2 as Administrator but it might be a permissions problem as this is a new install of 2008 and seems pretty locked down.
Thank you in advance

Are these signs of Adobe failing?
After subscribing to this forum, I received an email in German from Adobe......................
Vielen Dank für Ihren Beitritt im Adobe-Club. Als Mitglied können Sie eine Reihe exklusiver Vorteile, Ressourcen und Dienstleistungen in Anspruch nehmen.
Mitglieder können:
* unseren Newsletter Adobe Minute Mail (deutsch) abonnieren
* unseren Newsletter Adobe Edge (englisch) abonnieren
* Informationen zu ihren Käufen und Transaktionen im Adobe Store aufrufen
* ihr Adobe-Profil verwalten und aktualisieren
* in der Adobe Exchange Dateien hoch- und herunterladen
* Nachrichten in den Adobe-Foren veröffentlichen
Ihre Adobe-Club-ID lautet
Um Ihr Adobe-Profil und Ihre Voreinstellungen zu ändern oder um Adobe Edge zu abonnieren, loggen Sie sich einfach ein.
Whatever, Adobe

Install Business Objects XI R2 on Windows Server 2008

Hi,
I want to install Business Objects on Windows Server 2008 using IIS7 however i cannot select the IIS ASP.Net option when I get to the "Choose Web Component Adapter Type" screen.

Ok,
After not having much like with installing on IIS7.0 i opted to do an install with the TomCat Server.
This was also not successful, It seems that TomCat relies on a service called NTLMSSP
this has been removed in both Vista and Server 2008.. (I guess this is why ive been having so many issues!)...
After doing some reading on the above mentioned service it is quite possible that IIS 7 could also be using it.
Thanks for all your responses, but i guess this is a definate thing now (just in case some one else comes looking for this information)
Edited by: Adam M on Sep 16, 2008 7:45 AM

Installing SAP GUI 7.30 in windows server 2008 r2

Similar Messages

Maybe you are looking for