Installing SAP PI 7.0 on UNIX OS

Hi all,
Can anyone guide me through the steps for installing SAP PI 7.0 on UNIX Operating System.
Are there any prerequisites for the system where in PI has to be installed.
Please mention the hardware configuration required for installing the xi server.
Any help would be highly appreciated.
Regards.
Younus

Below is a very useful link about installing PI 7.0 specific to UNIX OS....
Re: How to Install SAP PI 7.0 on UNIX OS
Kindly go through,,,,,,,,incase u find it of some use.......
Do alot points......
Thanks & Regards,
Deepika Kuppachari

Similar Messages

Installing SAP in Unix--How to get GUI

I will be installing SAP in a Unix Environment.
As per my understanding i have to do the following as first step.
<b>DISPLAY=<the ip address of my laptop>:0.0</b>
So pls let me know whether if i do this will i be able to see the SAPINST GUI and the Oracle Universal Installer GUI also

Hi,
You are on the right path.
But the pre-requisite for is to have a GUI Tool running on your system.
It could be citrix client, exceed (Humming bird), Xserver Or something similar.
After that based on that you can connect to the Unix server and get the GUI displayed on your system.
for example : Let's say that the GUI tool has generated the window for 0.0 Display mode then you need to execute the command
" export DISPLAY=UR_LOCAL_IP:0.0 "
OR ELSE
" setenv DISPLAY UR_LOCAL_IP:0.0 "
Where 0.0 is the display mode and hence if that changes to 4.0 then you wil have to replace the 0.0 with 5.0.
I hope this helps you!
Regards,
Prem

SAP R/3 4.6B Unix Oracle 8.0.6 ERROR

Hi Folks,
Im installing SAP 4.6B on Unix with oracle 8.0.6 --> This is the 1st part of the upgrade project...
I started SAP Installation, then I installed Oracle. Upto this point everything was OK. Then when I went back to SAP installation I get the following error at 66%
Creating coprocess /oracle/CDV/bin/sqlplus internal @/oracle/sapinst/sapr3_user as user oracdv and group dba
RC Code from SyCoprocess wait = 139
i checked the sapr3_user.log and first it said ORACLE not available even though svrmgrl i was able to connect and mount
now the log says this:
CUR := dbms_sql.open_cursor;
ERROR at line 18:
ORA-06550: line 18, column 8:
PLS-00201: identifier 'DBMS_SQL.OPEN_CURSOR' must be declared
ORA-06550: line 18, column 1:
PL/SQL: Statement ignored
ORA-06550: line 21, column 33:
PLS-00201: identifier 'DBMS_SQL.NATIVE' must be declared
ORA-06550: line 21, column 2:
PL/SQL: Statement ignored
ORA-06550: line 22, column 13:
PLS-00201: identifier 'DBMS_SQL.EXECUTE' must be declared
ORA-06550: line 22, column 2:
PL/SQL: Statement ignored
ORA-06550: line 25, column 38:
PLS-00201: identifier 'DBA_ROLE_PRIVS' must be declared
ORA-06550: line 25, column 2:
PL/SQL: SQL Statement ignored
ORA-06550: line 28, column 35:
PLS-00201: identifier 'DBMS_SQL.NATIVE' must be declared
ORA-06550: line 28, column 4:
PL/SQL: Statement ignored
ORA-06550: line 29, column 15:
PLS-00201: identifier 'DBMS_SQL.EXECUTE' must be declared
ORA-06550: line 29, column 4:
PL/SQL: Statement ignored
ORA-06550: line 36, column 33:
PLS-00201: identifier 'DBMS_SQL.NATIVE' must be declared
ORA-06550: line 36, column 2:
PL/SQL: Statement ignored
ORA-06
PLEASE HELP!!!!
Thanks
Seelan

Hi Seelan,
While installing Oracle Software you must not create the DB instance, in a step Oracle asks to created DB instance say no there and continue with SAP Installation and let the SAP installation create the DB instance.
Kindly confirm if you are following the same.
Regards,
Nilesh

Urgent pls ---- How to install SAP XI and check SLD configuration

Hello,
Pls send me links/pdfs/how to guide links --- to install SAP XI and check SLD configuration.
Regards

Hi,
A copy:
Links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
Installation Master DVD
Installation Export
Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
XI installation: https://websmp202.sap-ag.de/~sapidb/011000358700009389172004E.PDF
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
ABOUT XI :
If its just that you wanted to know more about sap xi....then the information below should definitely help you.
The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
Then under the name space which you want, you go on to define your data types, message types and message interfaces.
Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once youre done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
Also I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
<b>
Cheers,
*RAJ*</b>

Installing SAP ERP on DB2 with high availability

Hey Gurus,
currently we're installing SAP ERP 6 EHP 6 based on DB2 for unix and windows, this is done using the high availability option on AIX 7.1 and IBM's power HA.
We have the following architecture:
          Node A:
                    1-A host for ASCS, ERS and CI.
                    2-A host for the DB instance.
The same with node B replacing CI with DI.
Please advise on how to proceed with installation.
Also I need a bit of clarification regarding how to share (or export) the file systems between the hosts of the same node so that the CI can and DB can be connected, since as far as I know the DB installation will ask for the profile directory through the installation, while the CI will ask to see the db file systems as well as the db instance.
Thanks in advance

Hi Ahmed,
For your query
Also I need a bit of clarification regarding how to share (or export) the file systems between the hosts of the same node so that the CI can and DB can be connected, since as far as I know the DB installation will ask for the profile directory through the installation, while the CI will ask to see the db file systems as well as the db instance.
Please refer installation guide sections related to file system planning.
Here you can see the file system directory structure as well as information on which filesystems to be shared.
Attached are some screenshot for reference
Hope this helps.
Regards,
Deepak Kori

Pre requisites for installing SAP Router

Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
Aayush

Installing the sapcrypto library and starting the SAProuter
Contents
u2022     Downloading necessary software components from SAP Service Marketplace
u2022     Creating the certificate request
u2022     Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
     a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
     b.     For more information on how to obtain authorization if download is not possible see note 397175.
     c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5.     Copy the file to the direcory where the saprouter executable is located
6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1.     As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3.     Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4.     Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7.     With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9.     This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1.     Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX     printenv
Windows NT     System environment variable
3.     start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar

Installing SAP ERP6 EHp4on Solaris 10 ,oracle 10g

Hello gurus
i am planning to install SAP ERP6 EHP4on SOLARIS 10 Sparc,Oracle 10g
So i have 3 questions that i need a bit clarified although i went thro the inst guide
1.Will the install or sapinst ask me to create the oracle directories and sapdata files?Like the previous versions oracle 9.X.
2.If its not then what is the easiest way to point the installation to install in specfic directories e.g /oracle/SID/log for the log file origs,mirrors,oraachs etc and for sapdatas /oracle/data etc OR it will put them in the SAP standard dir /oracle etc
3.How do i start the patch install soon after the database install not using mopath but where u specify the path to /oracle /stage /10 what is the completecommand line as orasid?(when the installation stop and ask for the DB installation?
any ideas will be greatly appreciated

Hi,
Below are my answers,
--> Always prefereable to create the directories in advance with individual file systems. You have a specific SAP Note for this which will tell you how much sizes you need to keep for SAPDATA and log folders . So always create separate Mount points for individual directories which is a good practice for Unix based systems.
So in this case, Please create the file systems as follows /oracle/SID/102_64 --> For Oracle Home
/oracle/SID/sapdata 1-4 --> For SAPDATA folders
/oracle/SID/origlogA, /oracle/SID/origlogB,/oracle/SID/mirrlogA,/oracle/SID/mirrlogB
Then You can create a separate one for oracle/stage/102_64 or as per your wish.
Once your DB Instance Installation is done, You can define the full path of OPatch/MOPatch in the PATH Env Variable of ORASID so that no need to give it again. you can go to the folder/file where you saved your patch files and apply accordingly.
Hope I contributed my 2 cents.
Thanks,
Jagadish

Do you plan support SAP BO XI Mobile for Unix!?

Hello!
Could you help to know answers to following questions please?
1. Does SAP plan support SAP BO XI Mobile for Unix!?
2. Can I install SAP BO XI Enterprise server on Unix machine and SAP BO XI Mobile install Windows machine?
Is it correct configuration for SAP BO XI system?
Best regards
Andrey

Thank you very much. But, Iu2019m interesting in the Business Object and SAP Integration KIT.
The Link only has the next software available.
Crystal Reports 2008
Crystal Reports XI
Crystal Reports for Eclipse
Crystal Reports Server 2008
Crystal Reports Server XI
Crystal Reports 2008 Visual Advantage
Xcelsius Engage 2008
Xcelsius Engage Server 2008
Xcelsius Present 2008
crystalreports.com
Nsite Business Applications
BusinessObjects Edge Series 3.0
Is there any other place where I can Find the Integration KIT? I mean, a free trial version of the integration Kit?

Can SAP be used with Linux & Unix...

Hi there ,
I got a query that whether SAP can be used with Unix & Linux Operating System ...
Thanks & Regards
Kaushik Choudhury

Ýes, Any ERP package can be used at any of the OS with any of the firewall or secure access systems. That is one of the advantages of going for ERP systems over custom applications. Custom applications are OS and database dependent while ERPs are mostly not.
SAP can be installed in Windows, Linux, Unix in various databases too.
Hope this helps you.
Reward if it helps.

Sap installation screen shots on UNIX platform

hi friends,
can any one send or guide me in getting me the SAP INSTALLATION screen shots on UNIX platform..
pls mail to [email protected]
regards,
satish.

"Unix" is a generic term for operating systems based on the initial AT & T operating system. There are many flavors of it - on some of them you can install a SAP system, on others not.
There is (for SAP)
AIX
HP-UX (on PA-RISC and IA64)
Solaris (on SPARC and x86_64)
Linux (on x86, x86_64, IA64, Power)
Each one of those has its specialties and special configuration. So without knowing to what "Unix" you are referring, your question can't be answered that easily.
On top of that, using screenshots to install software is a pretty bad idea. I may work for the one who did those but it may not for you if you have a different hardware configuration, more or less memory, different filesystem layout etc. In that case, you will cry for help the first time you see an error message - and since you don't know what the system was trying to do, you can't find a solution for it.
Therefore it's MUCH better to use the (very good) installation guides, they will tell you what you need to do, they will explain everything much more in detail than a "screenshot document" could tell you.
Use the given link to get your guide and try - and if you have problems, ask your questions in the appropriate forum - I'm sure there are people willing to help (including me).
Markus

Need a Help with instalation SAP IDES 2005 SR2

Hi All,
I'm trying to install SAP IDES 2005 SR2 on my notebook HP (2GB RAM, 120GB HDD, 700 HDD external, dual core procesor), Win Server 2003 Enterpise, Oracle 10g (patch 2), jave 1.4.2.13, I've downloaded all installation files DVDs from SAP Marketplace.
Everytime my installations stops on step 19 - Import ABAP, and I get message like this:
(DB) INFO: T76MGE_CGROUP~0 created #20081023222635
DbSl Trace: Error 604 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-604 occurred when executing SQL stmt (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "T76MGE_CKI" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "CHKL_ITEM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "TASK_FOR" VARCHAR2(12) DEFAULT ' ' NOT NULL , "START_DATE" VARCHAR2(6) DEFAULT ' ' NOT NULL , "POSS_DUR" VARCHAR2(12) DEFAULT '0000' NOT NULL , "PSDUR_T_UNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL , "NEC_IT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "IS_DOC" VARCHAR2(3) DEFAULT ' ' NOT NULL , "START_DIFF" NUMBER(4,0) DEFAULT 0 NOT NULL , "START_TUNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL , "END_DATE" VARCHAR2(6) DEFAULT ' ' NOT NULL , "END_DIFF" NUMBER(4,0) DEFAULT 0 NOT NULL , "END_TUNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20081023222635
and also:
TRACE: 2008-10-23 22:22:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2008-10-23 22:26:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2008-10-23 22:26:48
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2008-10-23 22:26:48
1 error(s) during processing of packages.
INFO: 2008-10-23 22:26:48
Import Monitor is stopped.
Could anyone help me with this issue, what I am doing wrong?
I'll appreciete any help, cause I'm going crazy this is may be the 5th time that my installation stops on this stage.
Thanks in advance

Hi Eric
These are values in init.ora:
#Transaction processing
#sort_area_size=524288
#Datawarehouse
sort_area_size=1048576
large_pool_size=1048576                  #Transaction processing, Datawarehouse
db_cache_size=50331648                   #Datawarehouse, Transaction processing
java_pool_size=67108864                  #Datawarehouse, Transaction processing
db_block_buffers = 200                 # INITIAL
db_block_buffers=100                    #SMALL
db_block_buffers =550                   # MEDIUM
db_block_buffers=3200                   #LARGE
#shared_pool_size = 52428800             # INITIAL
shared_pool_size = 67108864              # datewarehouse, transaction processing
log_checkpoint_interval = 10000
How I have to chenge the values?
And in init<SID> values are:
unit of shared_pool_size: bytes
unit of db_block_buffers: number of cached blocks
unit of log_buffer: bytes
shared_pool_size = 160903987
10% of shared_pool_size
shared_pool_reserved_size = 16090398
log_buffer = 1048576
Please, let me know what are the correct values?
Thank you in advance

How to log in to the new installed SAP ABAP instance ?

Dear Experts,
In SAP ERP 2005 installation,
I have done central system installation, Now I need to perform postinstallation steps,
Could you please tell me, how to log in to the new installed SAP ABAP instance and do the post installation?
Regards,
Madhavan K

Hi,
Check the list of post installation steps:
http://www.saptechies.com/post-installation-steps-for-ecc-60/
From my point of view basic post installation steps are:
- Installing SAP License (from http://service.sap.com/licensekeys)
- Setup TMS (STMS)
- Import profiles (RZ10)
- Client Copy (SCC*)
- Create users (SU01)
However further many steps are required as per your requirements. Cehck the link for more detailed steps.
Regards,
Srikishan

Error while Installing SAP NetWeaver Testdrive sr1 in Fedora 7

I am getting problen while Installing SAP NetWeaver Testdrive sr1 in Fedora 7
I need to install SAP Web Application Server 6.4 ,SAP NetWeaver Developer Studio,MAXDB7.5 in Fedora Core
The package sapj2ee-srv-sapdb-6.40-2 is already installed.
The package sapdb-7.5-2 is already installed.
The package sapdb-db-log-7.5-2 is already installed.
The package sapdb-db-files-7.5-2 is already installed.
Found interface: eth8 . Alias is eth8:0
ifconfig eth8:0 195.155.155.1 up
LD_LIBRARY_PATH: Undefined variable.
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/sapdb/programs/bin/xuser: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
[: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Can u suggest what I need to do ? do I have to install any rpm

Hi Debashis Mallick,
it seems the program xuser need the libraries libdl.so.2 and libc.so.6 and don't find it.
Both are in package glibc-2.6.x. ,maybe your have Version < 2.6 installed?
Regards
Andreas Filzer

Installing SAP Business One 8.8

Hello people,
I cant install SAP Business One Server in the Database UserID and Database Password i dont know what to put in I installed MYSQL Server 2005 .. I read in the internet that the default one is sa and the default password is B1Admin but everytime i type it in it says "The Connection to the specified server has failed..Check your password and that the server exist on the network".
I tried making another login in the SQL Server Management Studio Express.. But when i put it in the Database UserID and Password it says the error.I dont know what to do next i tried google but SAP B1 Opensource installation is no where to be found even in youtube.

Hi,
you may try this following SAP note solution:
The connection to the specified Server has failed.
Symptom
The connection to the specified Server has failed.
Check your password and that the server exists on the network
Other terms
Installation,Upgrade,login details,Installer,Unable to upgrade
Reason and Prerequisites
Consulting
Solution
In the Installshield the length of the combobox for selecting SQLServer name is limited to 24 charactes.
For example if the server name is PRODUCTIONSERVER\PRODUCTIONDATABASE.
Since the instance name is exceeding 24 characters the full server name will not be provided.
Please use(local)\PRODUCTIONDATABASE OR .\PRODUCTIONDATABASE, instead
of entrying the wholestring

Trying to install SAP Business One 8.8 on a clean Windows 7 professional pc

Hi, i am trying to install SAP Business One V 8.8 on a clean Windows 7 professional laptop. I need to install the server and client sides. I have already installed SQL server express 2005.
When i try to to install the server software I get the error message 1628 installation failed almost straight away. I ket the same message if I try and install the server tools, SBo server or outlook integration.
What am I doing wrong?
Thanks in advance
Simon

Hi Simon,
Solution to Problem ID :1618
Try the following Steps :
1. Clear the 'Temporary' Folder of Windows 7 : Start ->Run->%temp%->Press 'Enter'->Select All & Delete
2. Restart your machine. (This is Must)
Actually it keeps an image of the previous installations, so always for re-installation you need to perform this steps.
Same is with Win 2008 Server editions also.
Now proceed with the installation and remember always run SBO installations in Windows 7 and 2008 Server by clicking on 'Run as Administrator'
Hope your problem would be solved.
Regards,
Saikat Roy

Installing SAP PI 7.0 on UNIX OS

Similar Messages

Maybe you are looking for