Installing saved files from a hard drive on to a new mac!

My Mac Book Pro suffered damage and has been replaced. Everything had been saved via Time Machine on an external hard drive. This question may seem silly but before sinking it all across, do I have to re-install my programs such as Final Express or is that data part of what has been saved?

Have a read at the Time MAchine FAQs from our local TM guru Pondini http://web.me.com/pondini/Time_Machine/FAQ.html
Stefan

Similar Messages

  • How to migrate only some photos from external hard drive/Time Machine to new Mac?

    I just bought a new MacBook Air, after my old Macbook died. Luckily I had everything from the old computer backed up on an external hard drive through time machine. However, when I tried to migrate everything to my new computer, I found I do not have enough room for all of the files. I would like to import just some of the photos/albums from my old Iphoto Library but it looks like I can only migrate the entire library, or else nothing at all? Since I don't have enough space on the new computer, it's not allowing me to import any photos. Is there a way around this?

    With iPhoto it's all or nothing.  Therefore get a second EHD to restore the library to.  Then you can duplicate the library, open the duplicated and delete all of the photos you don't want in it.  When that library is small enough to fit on your MBA copy it to the Pictures folder.
    Then you can use the paid version of  iPhoto Library Manager to copy new events from your MBA library to the library on the 2nd EHD to keep it up to date with all of your photo. There are portable EHDs that are not much bigger than a mouse (the computer kind ) that would work fine for this.

  • [SOLVED] How to Restore Folders/Files from a Hard Drive

    I broke my system today; it won't boot into any run level. Rather than try to fix it, I'd like to just pull off the 4 or 5 MB of files that are on the hard drive. The partition they are in was formatted XFS. I have the 2008.06 ArchLive CD - is it possible to access files from the hard drive after booting with an ArchLive CD? If so, I could just scp them to an external server. Any help is greatly appreciated. Thanks.
    Last edited by tony5429 (2008-09-28 04:52:39)

    You should be able to mount the partition once you've loaded up the live CD. Just figure out which one it is by using
    fdisk -l
    then mount it to /mnt or wherever you want it.
    As for moving/saving them, I'm not entirely sure how to get them onto an external server. You might have to mount another partition in order to install any apps that you need to connect to an external server, but wait for someone who really knows to answer before you try it. If you're only talking about 4 or 5 MB, I would just mount a USB stick and dump them on there.
    Last edited by Xyne (2008-09-28 03:38:02)

  • Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
    How did you import the photos to iPad and iPhone?
    If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
    See this document:  http://support.apple.com/kb/HT4236
    You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
    If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
    http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
    Save photos to your computer using iTunes
    Connect your iOS device to your computer.
    Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
    Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
    Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
    Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
    Select all the photos in an album or event: Tap All.
    In iTunes, click the button for your device and click Apps at the top of the window.
    Below File Sharing, select iPhoto (in Apps).
    Select the Shared Photos folder under iPhoto Documents.
    Click Save To and select the location on your computer where you want to save the items.
    To view your photos, go to the Finder and look in the location you selected above.

  • Transferring some files from old hard drive to new mac book pro: How do I do this?  I bought a SATA Wire, and can't figure out how to get my files

    Hi there, my old mac book recently died and I opted to buy a new macbook pro, instead of pouring lots of money into the old computer.  I was able to get my hard drive out, and I bought a 2.5" Sata Nootbook Drive Upgrade Kit.  I have also installed superduper!....but I can't really figure out how to get everything to work.  I just want to be able to take some of my files from my hard drive, not everything...
    Any suggestions?
    Thanks!

    I don't know what a "2.5" Sata Nootbook Drive Upgrade Kit" is but if you have a internal drive you need to connect all you needed was a $20 IDE/SATA to USB adapter
    You don't need Superduper, that's software designed to clone a entire Mac's boot drive to a external drive for bootable backup purposes using the same machine/make/model.
    Since the new Mac is different than the old one you can't clone (well you could but it will break the machine) the old drive to the new one.
    However you can use the adapter above and software Apple provides in the Utilities folder on the NEW MAC, called Migration Assistant to transfer your User to the new machine.
    However this might not be the best course of action as it can transfer unwanted data and cause problems in the Library, old programs that won't run on 10.7, etc.
    You can simply create the same named user on the machine (System Preferences > Accounts) log into it and then connect the external drive with the adapter and copy the contents of your users folders over and place into the same.
    It's always good to have another Admin level user account on the machine in case the primary one has a User based issue and you need to log into the other and grab files. So if either manually or via using Migration Assistant you wind up with two user accounts on the machine, it's really not that big of a deal.

  • How to install archlinux2008.6 from the hard drive?

    How to install archlinux2008_6 by archlinux2008_6_i686.iso in  hard drive?
    i get the booting files(archlive.img,vmlinuz26) in the archlinux2008_6_i686.iso and put them in c:\
    in the grub command mode the use of these code:
    root   (hd0,0)
    kernel (hd0,0)/vmlinuz26
    initrd (hd0,0)/archlive.img
    boot
    i get those from : http://blog.chinaunix.net/u/31909/showart_1121360.html
    but  it stopped  , some  code  printing on the screen...................it can not continue..
    from the  google  i  find :"this method must use  the "vmlinz "and the "initrd.img",this files is from  archlinux2008.03.iso
    i don't understand .......
    i must download the archlinux2008.03.iso?...........it's too much  trouble.
    How to install archlinux2008.6 from the hard drive? or  who could give me the two files (the "vmlinz "and the "initrd.img")  from  archlinux2008.03.iso?
    e mail: [email protected]
    THS.
    --------this is my  topic for the first time in english, I hope that you can  know what i said ~~~
    Last edited by 自学linux (2008-08-29 03:14:54)

    自学linux wrote:
    http://blog.chinaunix.net/u/31909/showart_1121360.html
    A waste of CD-ROM...........,in china, many people install linux  just  by iso,don't burn the iso,
    could you give me the two files (the "vmlinz "and the "initrd.img") in  archlinux2008.03.iso, those  can't  find  in  archlinux2008.06.iso
    my email :[email protected]
    Do you have a USB stick you could copy the image to? Where I live, a CD costs $0.50 at most. To put that into perspective. A coffee costs a $1.00. Either a CD costs a lot more than a coffee where you live or are you telling me you'd rather get a lot of grey hair than buy half a coffee?
    Sorry I can't be of much help. I don't know how to do this method of installation. If you're desperate, you could try making an extra partition, and trying something with that. Take a look at these:
    http://wiki.archlinux.org/index.php/Fas … nux_System
    http://wiki.archlinux.org/index.php/Ins … her_distro
    Last edited by solarwind (2008-08-27 04:37:59)

  • Safari & FireFox  freeze when I try to upload a file from my hard drive.

    Safari & FireFox freeze when I try to upload a file from my hard drive. This just started happening in the past couple of days. I haven't installed any software, or made any updates (that I can remember.) When the browser freezes I can't "force quit" them. I have to manually shut the computer down are restart it. I would appreciate any help you can provide.

    HI and welcome to Apple Discussions...
    Safari and Firefox box.... it could be a problem with the hard drive itself, not your browsers.
    Just to make sure, boot from your install disc, run Disk Utility to Verify and if necessary, Repair any errors Disk Utility reports.
    Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    (In Mac OS X 10.4 or later, you must select your language first from the installer menu)
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
    Carolyn

  • The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

    The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue.  Is there a cable i can connect to another mac that will let me transfer the file?

    There is another option if the Macbook will start up in Target Disk Mode.
    Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
    http://support.apple.com/kb/ht1661
    Firewire symbol:

  • Help reading a .txt file from the hard drive....

    Hi guys,
    Ok... I need to know how to read a .txt file from the hard drive... I have an example on how to read from a disk, but I don't have a disk drive. I could be confusing terminology, but I don't think I am. Here is the code I have for reading from a disk.. please let me know how I should change it to read from a hard drive.
    Also, when the error pops up, it says that it can't read another .txt file that is not specified in the code... any ideas how that is occuring? Please advise.
    import java.io.*;
    public class TEST {
    public static void main(String args[]) throws Exception{
    FileReader fr = new FileReader("customer.txt");
    BufferedReader bfr = new BufferedReader (fr);
    String s;
    while ((s=bfr.readLine())!= null){
    System.out.println (s);
    fr.close();
    }

    Ok... I need to know how to read a .txt file from the
    hard drive... I have an example on how to read from a
    disk, but I don't have a disk drive. I could be
    confusing terminology, but I don't think I am. Here
    is the code I have for reading from a disk.. please
    let me know how I should change it to read from a
    hard drive.The code will be the same, regardless of where the file is located. It's just the filename that will be different.
    Also, when the error pops up, it says that it can't
    read another .txt file that is not specified in the
    code... any ideas how that is occuring? Please
    advise.Probably becuase the class file (compiled version of the source code) is a different version to the source code, i.e. the source code hasn't been recompiled since the source code was changed.
    How does this relate to EJBs?

  • I have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk?

    i have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk through disk utilities without erasing data (but will it delete my programs such as photoshop, office, creative suite?

    Connect the computer to another Mac and put it in FireWire Target Disk mode, or use the Disk Utility to clone the drive or image specific folders with the USB drive as the target. After you've copied off everything you want, you'll likely need to erase the drive and reinstall the applications.
    (69695)

  • I able to copy and paste files from external hard drive to mac, but not the other way around. Please suggest. Thanks

    I m able to copy and paste selected files from external hard drive to my mac but not the other way around. Im not able to copy files from Mac to external hard drive.
    The same is working fine with USB flash memory.
    Please help.

    Vijay Raymond Daniel wrote:
    The only thing is we need to buy this software. if there is a free solution to inter change files between NTFS and HFS it would be better,
    Don't use NTFS, remove your data off it first and change the format to something the Mac and PC can read, but doens't cost money or require software.
    Drives, partitions, formatting w/Mac's + PC's

  • HT4889 Transfer files from a hard drive to a new mac?

    Currently, I have a 2012 Macbook pro. I love it, but its kinda slow for me. When I bought my Mac, I didn't realize how much I would use it, so I bought the cheapest 15 inch in from 2012 (2.3GHz 4GB RAM 500GB HD) Now, I'm upgrading to a 15inch Retina Macbook Pro with 2.0 GHz 8GB RAM and a 512Gb HD. A local electronics store said that they will buy my mac for $950 from me, and I said yes. Then, I hooked up a 1TB Hard Drive and let time machine work it's magic.
    When I go to buy my new mac, what will I need to do to transfer all of the files from the hard drive?
    Also, I have over 150 movies in iTunes that are ripped dvds and 2000 songs from CDs, and I added info and artwork for all of them. Will they all still be formatted with artwork and info when I import them into iTunes on a new mac?
    Lastly, will I see a huge power boost in the retina Macbook pro with 8gb RAM and a 2.0GHz processor? or should I save up some more money for the 16GB RAM and 2.3GHz Processor? I'm going to college in a year, so I do tons of email/safari-ing, word processing, itunes playing, and downloading, usually at the same time. A usual day for me consists of writing a document in pages or microsoft word, while listning to music from iTunes, with safari open with multiple tabs, and something downloading to my mac. Thank you for the help, it's tremendously appriciated. 

    When you first start up the new Mac you will be asked to enter personal information, etc. At some point you will be asked if you want to transfer files from another source, including Time Machine back up. Make sure your back is connected, and just follow the directions on the screen.
    All formatting etc. will be intact, since TM makes sure it is.
    As for perfomance, the biggest performance boost would be a solid state drive. Have you looked at that option?
    And one of the more prevalent reasons for perfomance hit is an over-stuffed start up drive. Mac OS X needs empty space on the start up disk to do its tasks, make sure you give it enough. Take a look at this: http://macs.about.com/od/faq1/f/How-Much-Free-Drive-Space-Do-I-Need.htm

  • How do i transfer files from my hard drive to an external hard drive as FAT files?  Laptop hard dive is full and I need to clear space.

    How do i transfer files from my hard drive to an external hard drive as FAT files?  Laptop hard dive is full and I need to clear space.

    In Disk Utility use MS-DOS
    Try http://www.mactip.net/guide-how-to-format-an-external-drive-to-work-seamlessly-w ith-macs-and-pcs-without-third-party-software/ for additional directions.
    Allan

  • I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

    I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

    You could try Paragon HFS+ for Windows. That would allow you to read and write files from a Mac-formatted drive.
    Clinton

  • How do I open an HTML file from my hard drive?

    Hello FireFox,
    I develop applications in JavaScript and need to test them in the three major
    browsers including FireFox. In the older version one would click on the FireFox logo and
    go to New Page (New Tab?) and then File. Recently downloaded FireFox 30.0 and there
    does not seem to be New Page option. I see New Window but it does not give me an option
    for opening a file from the hard drive.
    Thanks
    Allen in Dallas

    Hi!
    There are a few ways to open files in Firefox. The easiest is '''CTRL''' + '''O'''. Another easy option is to click Menu > Open File (if it's not there, you'll have to enter the Customize menu to drag it in).
    <hr>
    Happy coding!

Maybe you are looking for