Installing SCUP/WSUS and integration into SCCM

I have tried installing SCUP onto a SCCM 2012 Server with WSUS hosted on another site.
I used the instructions that have been circulated on the internet from Kent Agerlund. Despite persevering with this I cannot get updates to show in system centre configuration manager to deploy.
Installed the site update role on the sccm server
1)Installed Hotfix KB2530678-x64
2) Installed the update sc update publisher
3) Installed the Signing certificate using the designated port to our wsus server
4) Enabled config mgr integration connecting to a local CM server
5) Exported the certificate to the WSUS server
6) Imported the partner catalogue and published the abobe flash player update.
I get
File C:\Users\<username>\AppData\Local\Temp\2\\1t1ilkm3.geb\AdobeFlashPlayerCatalog_SCUP.cab has certificate but signature check failed, will be treated as unsigned.
Updates Publisher 01/12/2014 10:16:29
9 (0x0009)
The error log that I get now is
WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "<sccmsername>.Local".
Is is easier to migrate all of the WSUS updates to the SCCM server and then install scup?

Are you running SCUP with an account this is a local administrator on the WSUS instance and/or have you run SCUP elevated to ensure UAC is not getting in the way?
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

How easy is learning Photoshop and integrating into FCE?

Hi:
I have a friend who wanted me to do a montage. When he brought his pictures over, he asked if I could put cute borders and backgrounds on some pictures (like scrapbooking) maybe even words? I called the apple store and they suggested Photoshop? If that's the case, how easy is it to learn, as he wants the dvd by Christmas, and I will be scanning in pictures. What dpi do I set his pictures at to work in Photoshop and then import into FCE? I read somewhere that .jpg do not do transparency - what format should I save them?
I'm hesitate to learn but thought it would be a good idea to learn and I could get a better montage from it, correct?
Thanks!
Susie

Susan,
Targa is good image format to use since it is uncompressed and can contain an alpha channel. However, why do you need an alpha channel on a scanned image? With photos I'd normally use JPEG.
When working with the images, if you go down the route of photoshop/elements just save in .psd format since FCE can import that, alpha channel and all.
If you want to avoid spending money then as suggested by Alchroma you can do basic borders and text, etc in FCE. Or there's always the opensource Gimp.app or Gimpshop. These will probably be harder to learn than Photoshop Elements and you won't have a native file import like with photoshop, but you can always export to something like Targa.
With regards to dpi, as said it's not the dpi per se that's important, it's the image size in pixels and what you intent to do with it. See this page on Tom's site for more info: http://www.fcpbook.com/Pages/PS6.html

Remote WSUS integration with SCCM 2012

Hi,
We are currently having WSUS already in place for Patching , but not used at all its just installed.
can remote WSUS be integrated with SCCM 2012 server which is on different server ? what is the best practice ? is it to have WSUS on same server as Primary server?
or I decommission it and install a new WSUS on same server as SCCM server.
what steps have to be taken care if remote WSUS is integrated ? any documents or steps to be taken care .
Thanks in Advance

When you install SUPs, they automatically configure the underlying WSUS instance to sync from an upstream server based upon your ConfigMgr hierarchy.
A couple of notes here though:
- You generally shouldn't use an existing instance of WSUS for ConfigMgr. Once integrated into ConfigMgr, WSUS should no longer manage approvals, update binary downloads, or update binary distribution as these are all handled by ConfigMgr separate from WSUS.
Using an existing WSUS instance where this was the case can be problematic at best and will cause unexpected behavior and results.
- Clients do not choose SUPs based upon boundaries or location so using a remote SUP is typically not beneficial and in many cases will cause additional network load. The exception to this is if the SUP is within a secondary site.
Jason | http://blog.configmgrftw.com | @jasonsandys

Configuring OID and logging into a database with a OID username\password

I've installed the Oracle database software (v9.2.0.2.1) and created a database called OIDDB. I then installed the "Management and Integration" portion of the Oracle database software which includes "Oracle Management Server" and "Oracle Internet Directory". All of this installation is on the same database box.
On another server, my other database (called: BAHDB) resides that I OID enabled. I've already used the "Database Configuration Assistant" to register it with the directory service.
What else needs to be done at this point to log into the database without a Oracle username and password? What high level main steps am I missing? Do I need to do anything with Oracle wallets?

There's now a difference when you use domains in your network configuration:
tnsping server.at.your.domain should get resolved through tnsnames.
tnsping server shoudl get resolved through the LDAP server.
The illegal userid/password error makes me suspect you try to logon with the fully qualified server name; LDAP should respond with something like "no nickname found".
Also - the guest user is only used as a "stub" - you should be able to login with a name, defined in OID - not defined in the database!
Things to check:
- rdbms_server_dn - DBCA should take care of it during registration of the database in OID, but it does not always do that. Setting it requires a restart. Remeember, it is case sensitive! Format is cn=SID,cn=OracleContext,dc=<your realm here>
- Wallet. Was it created, what is in it?
- User mapping (Use the Enterprise Security Manager - part of the client install); open Realms, open OracleDefaultDomain within Enterprise Domains, third tab ("Database Schema Mapping"), select "Add".
Navigate to cn=Users,dc=<your realm>. Make sure Subtree level is selected, and use your globally identified user (you used guest) for schema; click OK.
Click Apply
You should now be able to logon as any user, defined in the OID under cn=Users,dc=<your realm> - orcladmin should do.
when logged on, show user will respond with "guest"; use select sys_context('userenv','external_name') from dual; to find out the real user.
The way you now set it up probably will fail to login with 'user lacks create session privilege' - for test purposes, grant create session to guest - in a 'normal' eenviroment, you would use enterprise roles, and assign these to the OID defined users, not directly to the "stub user" (guest in your example)

Jdeveloper 11g and Integrated Weblogic Sever 10.3

Hi everyone,
i install jdeveloper 11g and integrated weblogic server 10.3 but when i create a simple ADF web application in ONE simple HELLO WORLD JSF page and i run this page give me this error:
<Feb 24, 2009 6:50:52 PM WET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1235501448994' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     Truncated. see log file for complete stacktrace
>
<Feb 24, 2009 6:50:52 PM WET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'APP_TesteWLS'.>
<Feb 24, 2009 6:50:52 PM WET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application APP_TesteWLS on DefaultServer.: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root'.
weblogic.application.ModuleException: Failed to load webapp: 'APP_TesteWLS-ViewController-context-root'
#### Deployment incomplete. #### Feb 24, 2009 6:50:52 PM
oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:561)
     at oracle.jdevimpl.deploy.weblogic.common.Jsr88WeblogicDeploymentHelper.redeployApplications(Jsr88WeblogicDeploymentHelper.java:259)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:222)
     ... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:542)
     ... 13 more
#### Cannot run application APP_TesteWLS due to error deploying to DefaultServer.
[Application APP_TesteWLS stopped and undeployed from Server Instance DefaultServer]
i read the Oracle JDeveloper 11g Installation Guide and in "11 Using WebLogic Server with Oracle JDeveloper"
"Installing Oracle JDeveloper Studio 11g Release 1 (11.1.1) also automatically installs Oracle WebLogic Server 10g Release 3 (10.3). Oracle JDeveloper uses this preconfigured installation as the Integrated WLS, a Oracle JDeveloper-managed server for testing and debugging your applications from within the IDE. *After installing Oracle JDeveloper, everything you need to begin developing, testing and debugging web applications is installed and configured for you; no additional configuration steps are necessary for development purposes.*"
my environment is:
OS -> fedora 10
Ram -> 4gb
i need help .... thanks ...
best regards
Edited by: Vale Teixeira Miguel on Feb 24, 2009 6:55 PM

hi Olaf, thanks for your help
yes i do the same
i confirmed all steps and i do correct ...
i change the JDK 1.6.0_11 to JDK 1.6.0_12
i change the JDK settings in $JDEV_HOME/wlsserver_10.3/.product.properties to JDK 1.6.0_12
i change the JDK settings in $JDEV_HOME/bin/jdev.conf to JDK 1.6.0_12
when i run the application give me this error
<Feb 25, 2009 5:09:42 PM WET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'Web_Teste1'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1373)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     Truncated. see log file for complete stacktrace
java.lang.UnsatisfiedLinkError: /opt/app/oracle/jdev/jdk160_05/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)
     at java.lang.Runtime.load0(Runtime.java:770)
     at java.lang.System.load(System.java:1005)
     Truncated. see log file for complete stacktrace
Feb 25, 2009 5:09:42 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Feb 25, 2009 5:09:42 PM WET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Feb 25, 2009 5:09:42 PM WET> <Warning> <Server> <BEA-002611> <Hostname "prtt01", maps to multiple IP addresses: 192.168.75.84, 127.0.0.1>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.75.84:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Feb 25, 2009 5:09:42 PM WET> <Warning> <Server> <BEA-002611> <Hostname "192.168.75.84", maps to multiple IP addresses: 192.168.75.84, 127.0.0.1>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Feb 25, 2009 5:09:42 PM WET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 20996 ms.
DefaultServer started.
[Running application Web_Teste1 on Server Instance DefaultServer...]
---- Deployment started. ---- Feb 25, 2009 5:09:46 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-02-25 17:09:47.026: Writing WAR file to /home/mvt/.jdeveloper/system11.1.1.0.31.51.88/o.j2ee/drs/Web_Teste1/Web_Teste1-ViewController-webapp
2009-02-25 17:09:47.04: Wrote WAR file to /home/mvt/.jdeveloper/system11.1.1.0.31.51.88/o.j2ee/drs/Web_Teste1/Web_Teste1-ViewController-webapp
2009-02-25 17:09:47.194: Writing EAR file to /home/mvt/.jdeveloper/system11.1.1.0.31.51.88/o.j2ee/drs/Web_Teste1
2009-02-25 17:09:47.213: Wrote EAR file to /home/mvt/.jdeveloper/system11.1.1.0.31.51.88/o.j2ee/drs/Web_Teste1
Redeploying Application...
<Feb 25, 2009 5:09:49 PM WET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Web_Teste1 is not versioned.>
Feb 25, 2009 5:09:49 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Feb 25, 2009 5:09:55 PM WET> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: Could not initialize class sun.beans.editors.ColorEditor.
java.lang.NoClassDefFoundError: Could not initialize class sun.beans.editors.ColorEditor
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     Truncated. see log file for complete stacktrace
>
Feb 25, 2009 5:09:55 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Feb 25, 2009 5:09:55 PM WET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1235581788818' for task '0'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1373)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: Could not initialize class sun.beans.editors.ColorEditor
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     Truncated. see log file for complete stacktrace
>
<Feb 25, 2009 5:09:55 PM WET> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'Web_Teste1'.>
<Feb 25, 2009 5:09:55 PM WET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Web_Teste1'.>
<Feb 25, 2009 5:09:55 PM WET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1373)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: Could not initialize class sun.beans.editors.ColorEditor
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application Web_Teste1 on DefaultServer.: .
weblogic.application.ModuleException:
#### Deployment incomplete. #### Feb 25, 2009 5:09:55 PM
oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:561)
     at oracle.jdevimpl.deploy.weblogic.common.Jsr88WeblogicDeploymentHelper.redeployApplications(Jsr88WeblogicDeploymentHelper.java:259)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:222)
     ... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:542)
     ... 13 more
#### Cannot run application Web_Teste1 due to error deploying to DefaultServer.
[Application Web_Teste1 stopped and undeployed from Server Instance DefaultServer]
i not understand why my fedora 10 give me this error ...

JDBC Thin Driver Support for Data Encryption and Integrity

Hello JDev Team,
I am trying to implement JDBC Thin Driver Support for Data Encryption and Integrity.
It works fine with java.sql.Connection and java.util.Properties like in the following code:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Properties props = new Properties();
int level = AnoServices.REQUIRED;
props.put("oracle.net.encryption_client", Service.getLevelString(level));
props.put("oracle.net.encryption_types_client", "( RC4_40 )");
props.put("oracle.net.crypto_checksum_client",Service.getLevelString(level));
props.put("oracle.net.crypto_checksum_types_client", "( MD5 )");
Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:main", props);
etc...
But I am developing an application with InfoSwing components and it has a different way to connect to Oracle database using oracle.dacf.dataset.connections.Connection, like this:
sessionInfo1.setAppModuleInfo(new ModuleInfo("bc", "BcModule"));
sessionInfo1.setConnectionInfo(new LocalConnection("JDBCThin"));
sessionInfo1.publishSession();
My question is:
Is there any way to implement DataEncryption and Integrity into this type of connection?
Thanks a lot in advance.
Victor Bykov
null

Victor,
No, you can't do this from DAC, but I've been discussing it with the developer, and we both think this capability would be useful to have, so I've logged it as an enhancement request.
I do have a question for you. Once you've made the JDBC connection, do you need access to the Connection object afterwards? We're thinking of how the change could be implemented, and one way would be to allow you to pass in a Properties object when creating your own NamedConnection.
Thanks
Blaise

Partial integration of WSUS and SCCM SP1

Hi,
We have an environment with a CAS and nine primary sites. The primary sites are geographically located in different countries. Each country currently manages it's own external WSUS environment, downloading their relevant language packs, etc. Group policy
is applied at a country level to direct clients to the WSUS server.
We would like to install the SUP on our local primary site. I am aware that to do so I need to install the SUP (with WSUS) on the CAS before the role is available on my primary site.
Can anyone confirm the impact of this on the other countries? If they do not install the SUP on their local primary site servers, then I would assume that the external, standalone WSUS infrastructure will continue to operate without issue independent of
SCCM?
My understanding is that there should be no impact, but I need some documentation to support this. If anyone has any links I would appreciate it.

You won't find any documentation because it's not exactly a supported path but it will work and no else will be impacted. This has nothing to do with a possible conflict though as none is really possible because a stand-alone WSUS infrastructure is
completely independent of the WSUS instances stood-up for ConfigMgr and they won't even know about each other.
Ultimately, the clients will use whatever WSUS infrastructure that group policy points them to -- ConfigMgr doesn't do anything to get in the way of this even if they stand up a SUP in their primary site. without a SUP in their primary site though, the clients
won't even enable their software updates client so there's no overlap whatsoever. As long as the GPO is in place though, it will override anything in ConfigMgr as far as WSUS goes.
Note however though that if someone else wants to start using Software Updates in ConfigMgr in the future, you may run into issues because at that point you *must* share the same update catalog (remember that when integrated into ConfigMgr, WSUS is only
responsible for the update catalog and not updates).
As a side comment, I hope you didn't pay whoever recommended 9 primary sites very much because they robbed you (unless of course you actually have like 500,000 managed clients).
Jason | http://blog.configmgrftw.com

Can we re-activate Adobe patches once expired in SCUP and syncronized to WSUS and SCCM 2012 as expired?

Hi,
I expired a couple of Adobe patches in SCUP and published them in WSUS. They got synchronized in WSUS and SCCM as expired. After about two weeks those expired patches got cleaned from SCCM ( at least from UI).
I want to activate them again in SCUP and re-publish as active patches in SCCM. But its not working - I've tried WSUS cleanup and SCUP cleanup already!
Is there any way to re-active expired patches published by SCUP in WSUS and SCCM ? & How?
Excerpt from SCUP.Log:
PublishItem: Item 'Reader Multi Lingual User Interface 10.1.4 Update (UpdateId:'5c22235f-a3d9-48db-95eb-a60ec1886e8e' Vendor:'Adobe Systems, Inc.' Product:'Adobe Reader')' is on the update server and is expired, no publish actions are possible.

The key here is knowing WHY those updates were "expired" in the first place.
Most likely they were expired because they superseded another update. If so, merely duplicating and publishing won't achieve anything, because the duplicated/re-published update will also be superseded and get promptly expired again.
Ergo, if expired because superseded, the superseding package will need to be customized to remove the supersession references and it also will need to be republished, which also means that certain other considerations may need to be taken as well ... such
as the fact that you now have multiple packages that will conflict with one another that no longer have the requisite supersession metadata.
Regarding this scenario. Configuration Manager 2012 introduced the option to NOT EXPIRE superseded updates, or to defer the expiration for a specified number of days. This is not a SCUP thing; it's a ConfigMgr thing.
Configure the ConfigMgr product to behave the way you desire. Problem solved. :)
If YOU actually expired them in SCUP... then just UNEXPIRE them and republish. Shouldn't be any need to duplicate and republish. This is what Microsoft does all the time. Expire Update 'A' Rev 100 on Monday; publish Update 'A' Rev 101 on Patch Tuesday.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Search or Report on the CVE ID using SCUP 2011 and SCCM 2012.

I am in the process of deploying SCCM 2012 on a single server since we have a small environment, as a Primary Site Server. The SQL databases are located on a separate SQL 2008 cluster. I also have SCUP 2011 installed on the SCCM 2012 server.
I am starting to use SCUP as the facilitator to publish 3rd party patches into SCCM and I would like to be able to report on the CVE number that an update has. I know that not all updates have a CVE and that microsoft updates usually publish this in
the MSID article.
My question is if there is anyway to report on this CVE code from within System Center Configuration Manager? If the data is in the xml file in SCUP and I can read it there, does that information get discarded when published to SCCM or does it remain
with the update but hidden in the SQL DB? If it is hidden, I'm sure we can report on it but I would like to know if anyone else is pursuing this or had any other ideas for reporting on the CVE or searching for the CVE in SCCM 2012?
Thanks in advance.
Jason Apt, Microsoft Certified Master | Exchange 2010
My Blog

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
To my knowledge nothing was added to R2 that would give you the CVE. I think this can be done as a custom solution but it would take a while to do the R&D and write the solution.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Download the Update from WSUS and install it while rebooting the Windows 7

HI All,
Do we have any command to install the
already Downloaded Update from WSUS while rebooting the Windows 7 client machine
As per the group policy it will download and notify the user to install, but we need the command or script to install it while rebooting
Any comments or Idea...?
Thanks
Balaji

Hi,
Please take a check into the following thread and see if the marked answer(the powershell commands) would help:
How to install approved WSUS updates via
PowerShell or other method.
Best regards
Michael Shao
TechNet Community Support

Installing Lync 2013 and remove 2010 client via SCCM

We have Windows 7 x64 PC’s running Lync 2010 64-Bit client.
What I need to do is install the Lync 2013 32-Bit client and then uninstall the Lync 2010 64-Bit client.
Using the Office Customization Took, I am able to install the Lync 2013 client fine, however the 2010 client isn’t not removed.
Here is what I did:
-Have the standalone Lync 2013 installer.
I then copied the Lync 2010 64-bit install files into a new folder in the Lync 2013 source files.
This folder is c:\Lync2013\Lync2010
-Created MSP file using OCT set to never reboot.
-Under ‘Add installations and run programs’ option, I specified the Lync 2010 to be removed post install of Lync 2013.
The Command line: [post install] [INSTALLLOCATION]\Lync2010\LyncSetup.exe /silent /uninstall
-Loaded this into SCCM and set to run at a logon event.
As stated above, Lync 2010 is not removed.
A few questions:
Is this even possible using the OCT?
In the OCT, is it a problem trying to mix two different installers?
One 32-Bit, the other 64-Bit?
If not, then is the command line correct for the Lync 2010 uninstall?
If no for # 3, how do I make SCCM use the correct path to the package where the Lync 2010 install files are?
In the OCT, do I need to have the Lync 2010 command line as:
\%WINDIR%\SystemWOW64\CCM\Cache\nameofpackage
Please help me alleviate some frustration with any ideas for the above.

You can use the command msiexec.exe /uninstall “C:\Program Files (x86)\OCSetup\Lync.msi” to uninstall Lync 2010.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I'll try this, thanks! For the post uninstall of Lync 2010 using the OCT, should I also ad /quiet switch or /no restart to suppress dialog boxes and not restart the PC when the removal is complete? Or will the OCT prevent it from being restarted
and 'suppress modals' as I set this during the install of Lync 2013.

Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK i have already update my phone too.
if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload, . But its a pain of not using my IPHONE APP for facebook cause it does that.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

I just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing

i just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

Apple recommends separate partitions: http://support.apple.com/kb/HT4722

SCCM 2012 SP1 agent install via WSUS

Hi guys,
I'm having got an issue when I try installing the agent via WSUS. When I try installing manually everything seems to work.
Here are the infos from the ccmsetup.log:
==========[ ccmsetup started in process 2252 ]========== ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Running on platform X86 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Updated security on object C:\WINDOWS\ccmsetup\cache\. ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Launch from folder C:\WINDOWS\SoftwareDistribution\Download\Install\ ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
CcmSetup version: 5.0.7804.1000 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Running on OS (6.1.7601). Service Pack (1.0). SuiteMask = 256. Product Type = 1 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Ccmsetup command line: "C:\WINDOWS\SoftwareDistribution\Download\Install\ccmsetup.exe" ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
LSJoinedToADDomain ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Local Machine is joined to an AD domain ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
LSGetAssignedSiteFromAD ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
DhcpGetOriginalSubnetMask entry point is supported. ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Begin checking Alternate Network Configuration ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
spNamespace.Open(sNamespacePath), HRESULT=8004100e (e:\nts_sccm_release\sms\framework\ccmutillib\ccmiputil.cpp,1109) ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Finished checking Alternate Network Configuration ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
LSGetADSiteName ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Current AD site of machine is DE-Zeilarn ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Attempting to query AD for assigned site code ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
Performing AD query: '(&(ObjectCategory=MSSMSRoamingBoundaryRange)(|(&(MSSMSRangedIPLow<=2887256160)(MSSMSRangedIPHigh>=2887256160))))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Performing AD query: '(&(ObjectCategory=mSSMSSite)(|(mSSMSRoamingBoundaries=172.24.8.0)(mSSMSRoamingBoundaries=DE-Zeilarn)(mSSMSSiteCode=XYZ)))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSIsSiteCompatible : Verifying Site Compatibility for <XYZ> ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetSiteVersionFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetSiteVersionFromAD : Attempting to query AD for MPs for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSSiteCode=XYZ))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetSiteVersionFromAD : Successfully retrieved version '5.00.7804.1000' for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSIsSiteCompatible : Site Version = '5.00.7804.1000' Site Capabilities = <Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property Name="SSLState" Value="31"/></Capabilities> ccmsetup 08.02.2013
13:45:47 196 (0x00C4)
LSIsSiteVersionCompatible : Site Version '5.00.7804.1000' is compatible. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSIsSiteCompatible : Site <XYZ> Version '5.00.7804.1000' is compatible. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetAssignedSiteFromAD : Trying to Assign to the Site <XYZ> ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Got site code 'XYZ' from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Retrieving client operational settings from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=XYZ))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
OperationalXml '<ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
HTTP is selected for Client. The current state is 0. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
The MP name retrieved is 'mysccmserver.mydomain.tld' with version '7804' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property Name="SSLState" Value="31"/></Capabilities>' ccmsetup 08.02.2013
13:45:47 196 (0x00C4)
MP 'mysccmserver.mydomain.tld' is not compatible ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Retrieved 0 MP records from AD for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Received client operational settings: <ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Security settings: Http port 80; https port 443; select first cert 1; sslstate 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Security settings: Certificate Issuers = ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
FromAD: command line = SMSSITECODE=XYZ ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetManagementPointsForSiteFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
SslState value: 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Ccmsetup was run without any user parameters specified. Running without registering ccmsetup as a service. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Detected sitecode 'XYZ' from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMHTTPPORT:    80 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMHTTPSPORT:    443 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMHTTPSSTATE:    480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMHTTPSCERTNAME:    ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
FSP:    ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMCERTISSUERS:    CN=root-ca ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMFIRSTCERT:    1 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Creating CCMCertStore ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMCERTID:    SMS;FB0F35392A7FF68D2FA9C97D0CD54A3E0057964E ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
No MP or source location has been explicitly specified. Trying to discover a valid content location... ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Looking for MPs from AD... ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Retrieving client operational settings from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Received client operational settings: <ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Security settings: Http port 80; https port 443; select first cert 1; sslstate 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Security settings: Certificate Issuers = CN=root-ca ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
FromAD: command line = SMSSITECODE=XYZ ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetManagementPointsForSiteFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Current directory 'C:\WINDOWS\SoftwareDistribution\Download\Install' is not a valid source location. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
DetermineInstallSource(), HRESULT=80004005 (e:\nts_sccm_release\sms\setup\ccmsetup\ccmsetup.cpp,4426) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
Failed to parse '"C:\WINDOWS\SoftwareDistribution\Download\Install\ccmsetup.exe" ' with error 0x80004005 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CFSPStateMessage::CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CFSPStateMessage::~CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
CFSPStateMessage::CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
A Fallback Status Point has not been specified. Message with STATEID='307' will not be sent. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
CFSPStateMessage::~CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
ParseCommandLine(), HRESULT=80004005
My boundaries and boundary groups are configured, I can see the objects in the Systems Management Container in AD, but still the agent install via WSUS will not work. Any suggestions?
Cheers
Sebastian Bammer

see my latest post. It looks like a bug in the setup. It selects a certificate but still it presents information that iis on the mp does not accept. Check your iis logs. Manual install works for ssl only sites. I haven't got any other methods yet. I will
keep you updated.

Installing SCUP/WSUS and integration into SCCM

Similar Messages

Maybe you are looking for