Installing SDRAM for Graphics card

Hi,
When I order my Intel iMac I upgraded the graphics card RAM to the 256mb option. It arrived later as was available at the time, but I'll b*ggered if I can figure out where to fit it!
The RAM access panel on the bottom only has room for the memory RAM (both being used) and I can't find any info on where to install it.
Any ideas?
Cheers.

Hi Milney
I am sorry but the video memory is not user upgradable. It is a factory installed option because the memory chip is soldered on. If you orderded it with 256mb vram go to the blue apple in the top left corner/about this mac/ more info.../graphics/displays and verify if under vram (total) there should be 256 MB. If it is written 128 MB then contact apple if you have proof that the imac you bought (and paied for...) was the one with 256 MB. Also if you bought video ram (vram)somewhere you should go return it as soon as possible.
Nic

Similar Messages

HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card

i want HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card (Windows 7)

Hi:
Below is the link to the support and driver page for your notebook.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c03061225&lc=en&product=5163244&quer...
Your model uses the AMD graphics driver only. Don't install the Intel one.

Can't find recent driver for graphic card (display) cyberaladdin trident

I can't find recent driver for graphic card (display) cyberaladdin trident.
The game play with game Warcraft III.
I downloaded directX 9
I managed to install the game but I can't play it.
My display card is Trident Cyberaladdin-T. The game producer told me it is compatible. I tried to find drivers but I haven't find anything efficient. On toshiba site there a driver but quite old (previous to the date I bought the computer...)
I don(t knox what to do and my son is very disappointed because he can't play with this new game.
Thanks for your quick answer.

Hi,
At first it would be interesting to know for which Operating System your need this driver ? ;)
Well this Chipset Trident CyberALADDiN-T ( called Napa2T ) was build in three Notebook Types of Toshiba.
The Satellite 6000, TE2000 and the Satellite 6050. ( Driverversion all with Version 5.01.2527.0128 )
Normally the drivers you find on the manufacturer Pages are not the actual drivers. They only update the drivers if there are known problems.
So the only chance for you is to look threw the internet and look if someone else has used this graphic chip,and delivers are newer driver than Toshiba.
Sorry for the answer, but I had same problem with my Machine, but found a newer driver revision on another manufacturer page.
bye

Graphics card Quadro K4200 don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

I have purchased graphics card Quadro K4200, but graphics card don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

Did you use the nVidia Hack http://forums.adobe.com/thread/629557

Problem Installing my new graphic card 760GTX Stucks on HP Splash Screen

I'm using a h9-1185 Windows 7 and I thought I'd update my graphic card from a 7870 to GTX 760 but that was easier said than done. When I try to boot my computer with the new card it stays at the hp splash screen. The GPU is correctly installed I have both cables connected to the PSU. The fans are running properly It's just that I get stuck on the loading screen when I use the gtx 760. I can't press any keys to go to the boot menu, etc. After sitting at the screen for 5 minutes it changes to a black sreen showing at the corner the brand of my Graphic Card (760 PNY etc....) but nothing happens.
When I changed it back to the old graphic card Sapphire 7870, it didn't freeze or anything. It worked fine. I was trying to update my BIOS but I think i have the latest update (v7.09).
Maybe my english isn't good at all, sorry about that.

John, welcome to the forum.
Did you install the latest driver for the new video card? This must be done for it to work properly.
Also, when you have the new card and driver installed, I suggest clearing the CMOS:
This motherboard has a jumper to clear the Real Time Clock (RTC) RAM in CMOS.
Turn OFF the computer and unplug the power cord.
Move the jumper to clear for 5 to 10 secs, then move the jumper back to default.
Plug the power cord and turn ON the computer.
On the next startup, enter BIOS setup to re-enter user settings.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Can I install a bigger graphics card in my HP all-in-one MS200 Desktop?

Hey guys, I was wondering if it is possible to install a graphics card in my HP all-in-one MS200 desktop. I've been playing DayZ, and my FPS is terribly low. Looking around, I've noticed that most people say the problem is that you have a weak graphics card.
Is it possible to do this? If so, what graphics card would you recommend I buy? (I'm looking for a moderate boost in preformance. I don't really need a beast of an upgrade, or anything like that).
This question was solved.
View Solution.

The simple answer would be "not possible". Limited models support MMX cards, and these are low wattage.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

B540P Win 8 Solution for Graphics card, touchscreen & Sound problem!

First of all,.. It irritates me that I had to use 2 days of nonstop testing to find my OWN 100% working solution to make my All In One work. There has been absolutely no helpful info from the support staff of Lenovo on this problem. And it seems that quite a few users have had the same problem as me. Now,.. If there was no solution yet for the driver compatibility for running WIN 8, it would have been fair But as there is obviously a WORKING solution, it irritates me that the staff haven't been able to find out what I did. I mean,.. win8 is new,.. But NOT that new, so the staff should be able to provide a solution much much sooner. If I wasn't a real TechGeek, who have been messing around with this since the birth of PC's, I would probably have had no chance to resolve this problem on my own. Which would have resulted in me delivering an otherwise really amazing computer back, as it would have been close to impossible to use.
Now for the solution:
When I installed win 8, I was pretty fast left with a bunch of problems. Touch was glitchy, the touch soundbar was stuck on top left corner, which left the PC hanging. Graphics card was standard and it was impossible to use apps like Netflix etc. To solve this problem do following:
A. Install realtek audio driver version 6.0.1.6662 (if you already have a stuck soundbar, disable sound under devicemanager first. This will make you able to use the pc if it also hangs)
B. Install Nvidia driver version 9.18.13.593 ) link: http://support.lenovo.com/en_GB/downloads/detail.page?DocID=DS031642&rss=true IMPORTANT!!: when installing nvidia driver choose custom and untag the audio driver. If you install Nvidia's audio driver, you will get all the problems, witch stuck screen, stuck volume bar, as this is where the compatibility issues is. Only install the Graphics and Physx software, and you will be fine
C. Install FN Keyboard driver
If you did as above your now fine to go with a B540P that will run as it's supposed to . No more stuck of anything!
You can also install the the win7 driver for remote control. I'm still yet to make the TV tuner card work, as I didn't have the time to look into that yet. Will most likely have a solution on that in 1 days time, when I get the chance to look deeper into it. Will of course post solution here when I got it.
TechGeek over and out for now

Well from what you write im pretty sure its in the resolution and/or refresh rate the problem is located. That will make your monitor shut down or not turn on if set wrong. From what i remember also analog and dvi have a different range of refresh rates. What about hdmi? Does the card have this? So you could try connect it to the tv,. Some tvs also have DVI. I would try find a tv or monitor with pure dvi, not using analog adapter.,.. connect it,. If it turns on. Lower resolution and refresh rate and connect it back again to your monitor. If that doesnt work that would leave me puzzled . Thinking back,.. I actually remember I had a smiliar problem in the past,. I just can't remember how it was solved,. But the "error" was in the whole resolution, refresh rate, analog adapter vs dvi spectre.,.. maybe it was something with the dvi to analog adapter,.. hmm can't remember.. Well anyways. Put your focus there. Not on the win8 drivers for now at least

Can i get editor for graphic card?

Im not happy with the original dispaly calibrator, because it doesnt do much. Is it possible to get different like when you buy a separate graphic card it comes with driver and proper editor made my the card's company, where there are more adjustmens, because the ones from apple are very limited. Thanks.

Hi Robert
Go to the *Display Preference / Color* and uncheck the box *Show profiles for this display only* then select one of the sRGB profiles to see if they work any better for you.
Personally I use the Epson sRGB profile that was installed with my printer software, it's real close to the Adobe RGB (1998) and sRGB IEC61966-2.1 profiles that are some what darker and much richer.
Dennis

Pci to pci bridge error code 35 after installing my new graphics card

hello everyone
first of all i am not sure if in the right section of the forum to post this...if not i am sorry.
well about my problem...i ve bought this new graphics card msi geforce gt430 and a new psu which is 580 watt and yesterday i installed em both.and then i turned on my pc. the thing is windows cant detect my grsphics card.there is this yellow exclamation mark on pci standard pci to pci bridge in device manager menu.i tried uninstalling pci to pci bridges and rebooting my pc.it didnt help.i also tried updating every single driver again nothing changed.i also have one of the latest bios so i dont think it should be related to bios.i have no idea how to fix this.i am a little bit ignorant when it comes to pc hardware.i can use all the help i can get.
thanks for your helps in advance.
astinwald

Yup, wrong part of the forum.
Sven will move it next time he's here.
Pci2pci is a motherboard thing but could interfere with gfx detection.
I know you said you'd reinstalled all drivers but...
Did you get the latest drivers for your motherboard?
If that doesn't fix it I guess the next step would be a complete OS reinstall...

Drivers assistance required for graphics card and fingerprint reader with W8 & Pavilion DV7-6B01ED

Hi - I own a HP Pavilion DV7-6B01ED and recently upgraded from W7 Home Premium to W8 Pro. Everything appeared to work fine except for the graphics card I have which now seems to always be on with the fan running, getting hot and running down the battery much more than before. I can not confirm what was reported as the graphics card in W7, but it is reported as the AMD 7000M after the upgrade. My invoice reports that it is a HD6490. Further to this, W8 reported an issue with this device in Device Manager.
Due to another issue (not hardware related) I decided to do a clean install of W8 which would also let me clean things up and to re-partition my disk.
In doing so I deleted the HP_TOOLS and the Recovery partitions. I'm not against recreating these but needed to delete them as I had 4 primary partitions and could not work within the restriction that comes with this. I understood from reading online that these can be recreated and the necessary tools re-installed (or another solution with DVD / USB employed). If the solution to my problems requires these to be installed, I'm happy to do so.
After the clean install, I continue to have the graphics card issue (same details as above) and the other issue I have is with the fingerprint reader. It shows up as an unknown device after W8 install (it did not have any issues after the initial upgrade I performed though).
So I've done plenty of things to try to rectify the issue and this includes installing the HP Support Assistant in the hope that this would help with the drivers. Instead of going through all the steps I've undertaken (I've read plenty in this HP forum and outside of the forum) and used certain W7 drivers, installed this that or the other program but unfortunately to no avail. I cannot get the fingerprint reader working and I still have a very hot and noisy laptop.
I'm good enough with OS and device driver installations and happy to get stuck into some unorthodox solutions if needs be. What can I do to resolve these issues?
Regarding the graphics card - is it a case that AMD have yet to release an updated driver? If so, I can live with that but in the meantime I would like to turn off the AMD card and work only with the integrated Intel graphics. Disabling the device in Device Manager does not seem to work. How do I do that?
The fingerprint reader is no big deal, but ideally I would like it working. What to do here?
If I need to do a re-install of W8 again and then get stuck into the driver installations I'm good with that, but would like to do it in a manner that will let me resolve these issues in the future without too much hassle.
The spec of my machine is: HP DV7-6B01ED 17.3FHD / i5-2430 / 8GB / 750GB HDD / HD6490
Thanks!

Hello AttackofZaq....
Thanks firstly for your reply. I re-installed W8 to start from scratch.
OK, so I thought the AMD driver worked. I had installed it before I posted to the forum but then the problem seemed to have returned. I'll have to play with the settings because just as I type this the fan has started for no reason, same problem as before. Is there any chance Windows Updates in interfering?
Regarding the fingerprint reader - it hasn't helped. In Device Manager I now see Biometric Devices > Validity Sensors (WBF) (PID=0018). Is there some further software I require in order to use the device. I'm going to install SimplePass to see if that's needed.
I'll be back with an update.
chemus79

POWER SUPPLY info needed for GRAPHICS CARD UPGRADE!!!

I have a HP PAVILION p6631p and ide like to add a graphics card, but I was told I had to upgrade my power supply.
The card I purchased is the SAPPHIRE RADEON R7 260X 2GB and I was told I need a 500watt or higher power supply.
I was looking at the CORSAIR BRAND power supplies and tried emailing them to help me find the right power supply, but they said they needed to know what type of power supplies HP use in this model PC.
I didnt know what to do so im hoping someone can help me out with this information CORSAIR is asking for so they can help select me the right power supply for my PC.
I been searching for answers for weeks. Hopefully someone can help. Thanks.
This question was solved.
View Solution.

KJonline, welcome to the forum.
You were told correctly. You will have to upgrade the power supply unit (PSU) for the video card to work properly.
The PSU in the computer is a standard ATX. I suggest measuring the existing PSU and comparing the measurements to the one you choose.
I normally suggest at least 500W, but 600W is better for future upgrades. Here is a PSU that should work for you. It is 650W and is an Enthusiast series. This means that it has all of the power that you will need. It is 5.9" (W) x 3.4" (H) x 6.3" (L).
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Needed, Advice for Graphics Card & OSX Capabilities

I have a Dual 1 GHz Power PC G4 (Mirror Door) tower from 2002 (s/n#XB24706DMMA) (Model#M8570)
The graphics card is the original ATI 64MB AGP slot. Can anyone recommend a better card 128MB or 256MB?
Also, Currently I run OS 10.3.9 which is Panther.
Does anyone know how far up I can go with the Operating System? Tiger? Leopard?
Thank you for any advice.

Hi Scott, see japamac's page about G4/G5 Graphic cards...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
As far as OSes go, either Tiger or Leopard...
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=9755670&#9755670
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 2GB at least)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
You have to call Apple & see if they still have Leopard available.
Message was edited by: BDAqua

Win 7 on a31p / need driver for graphics card FireGL7800

All greetings from snowy Russia!
I had to install Win7 on my laptop a31p, in general, I am very pleased with the speed and new features. All the drivers are set automatically, and even managed to get to work the battery icon in the system tray
But there is one big problem: I can not find drivers for FireGL 7800 graphics card
I wrote a request to ATI (now AMD) but ou redirected me to Lenovo, citing the fact that they do not write drivers for these cards.
I would be very grateful for assistance in finding the driver for Win7 or la Vista!
You can write me an email: barmaley.russia @ gmail.com
Solved!
Go to Solution.

Welcome to the forum!
There is NO driver for Vista or W7 when it comes Fire GL 7800 because it's simply considered underpowered to run any of these operating systems.
I've had to tweak the XP driver to get it working under W7, and results were less than spectacular, although not bad for a 7-year old machine.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

FC Pro HD Error On Install "Requires AGP Graphics Card"

I just installed FC Pro HD on my new MacBook Pro. Updated to the latest versions. When I try to launch, I get an error message: "Configuration Error - This software requires certain hardware or software which is missing: *AGP graphics card" anyone know why it's saying this on my MacBook Pro and what the fix is? Thanks in advance
MacBook Pro Mac OS X (10.4.8)

Updated to the latest versions<<</div>
FCP HD is version 4.5 (PPC version). For IntelMacs, you'll need the Universal version; FCP 5.1. See http://www.apple.com/universal/crossgrade for more details on upgrading.
-DH

Looking for graphic cards compatible with the basic G5

Help!!
Went to the Apple Store to see if my G5 (M9020LL/A) which is the 1.6GHz PowerPC to see if it was compatible/could drive the 30" cinema display. They assured me my G5 could handle the large display. I have OS 10.5.8, iLife 09, 1 TB HD, 4GB RAM, NVIDIA GeForce FX 5200 Ultra with 64MB DDR SDRAM for the 8x AGP Pro slot.
The display arrived, I get picture but not resolution. Searched for a video/graphics card that was compatible. The ATI Radeon 9600 Pro PC/Mac with 256MB was recommended. I purchased one but can only get it to work with a safe boot. Get resolution but iPhoto cannot do the photos in full screen mode. But I can get full screen photos in screen saver mode?!
Apple support states they only recommend/support two cards for my model, the Radeon 9600 @ 64 MB, 2480X1326 res or the Radeon Pro, 128 MB, 2480X1326 res.
Has anyone had a similar problem with the Radeon card 9600 Pro PC/Mac with 256MB? Does anyone have a solution as to which card would be compatible with my G5 and get 2560X1600 res?
Any suggestions? Thanks you for your help!

Hi-
Welcome to Discussions!
Apple support states they only recommend/support two cards for my model,
Those were the only two cards offered at the time, so that is their "official position". You may safely ignore them..... even though they lied to you regarding the 30" ACD and your machine.
Has anyone had a similar problem with the Radeon card 9600 Pro PC/Mac with 256MB?
Often reported here on the forum.
Not a good card. If it works, fine, but many report as you do....Safe mode only.
The G5 can use any 8x AGP graphics card that was available in any AGP model G5.
OEM Mac cards with dual link DVI for the 30" ACD are:
Radeon 9650
Radeon X800XT
Geforce 6800 GT DDL
Geforce 6800 Ultra DDL
A flashed (converted WinPC card) Geforce 7800 GS may also be used.
Any of the above cards can be found on eBay/Apple Components.

Installing SDRAM for Graphics card

Similar Messages

Maybe you are looking for