Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

Dear all,
first of all thanks for reading this topic :-)
In our enviroment, we have a Exchange 2010 server (Version: 14.01.0438.000), whitch is installed with all server roles (CAS, HT and MB) on one server(OS is Windows Server 2008 R2 Enterprise). This exchange server sends all external mails to a smarthost (Redddox).
We are using Outlook Anywhere, Active Sync and OWA.
Now, we need to migrate this Exchange server to another one, because we think, that the server´s OS is corrupt and also, there are wrong licenses installed. The "new" server will have the same OS Version and Exchange Version (2010).
Currently I´m a little afraid, to install a new one - because I think when I will install the CAS and HT role, something will happen in my productive enviroment (Autodiscover, SMTP Connectors, Cerficates a.s.o.).
To install the mailbox role, I think this will not affect anything.
Can you help me a little bit in what to take care of? Do I need to preconfigure something, before I will install the second exchange? What about the version / service pack of Exchange to install? Must it be the same as installed on the first one?
Any help would be appreciated!
Jennie

Hi Jennie,
Below are the steps if you are not planning to upgrade.
1) Install new Exchange2010-SP3 Server all roles Please check
this
2) Install the certificate in the new server by requesting a duplicate from the 3rdparty CA. Or export from the existing Exchange 2010 and import to the new one. Please check
this
3) Set your autodoscover, OAB, ECP, OWA URLs same as the current Exchange. Below artciles will help you to do that.
For OAB, Autodiscover, EWS please check steps 5,6,7in this
For setting OWA and ECP URLs please check
this.
4) Move few mailboxes as a test and check. If no errors move the rest.
5) Move your OAB generation server to the new server. Please check
this
6) Move you public folder contents to the new server you have. Please check
this
7) Configure your firerwall to receive emails on the new server and other services like EWS, OWA, ActiveSync.
8)
Add the new server as the source server and in the current send connector and remove the old server from the send connector.
Shutdown the server for a couple of days and monitor. So you will know if you missed something.
Uninstall Exchange2010 from the add remove programs.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Similar Messages

How to install Exchange Server 2010 with the name of my existing Domain Controller.

I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)

Hi,
From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
What's more, here is a helpful blog about Exchange 2010 installation for your reference.
HOWTO Install Exchange 2010 - Step by Step
http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange Server 2010 with SP3 Management Tools

Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote Powershell, this service must be running. Make sure that the W3SVC is running on at least one Exchange server.
Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?

I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing thi

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing this "other" storage

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

HT204022 I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

Error In Re-install Microsoft Exchange Server 2010

Hi
Ihad Installed Ms Exchange Server 2K10 and work correctly.
I Did somne mistake and I had to uninstall and re-install that
but when I try to install that there are many Errors Apears.
Mentioned : when I was uninstall exchnage I delete Every Thing In Active Directory Users and computers
Errors:-----------
Elapsed time: 00:00:27
Organization Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Warning:
Setup is going to prepare the organization for Exchange 2010 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2007 server roles.
Elapsed Time: 00:00:19
Languages Prerequisites
Completed
Elapsed Time: 00:00:01
Hub Transport Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Error:
Setup cannot continue because one or more SMTP/Send connectors have invalid settings: Couldn't find the Enterprise Organization container.
Client Access Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Elapsed Time: 00:00:01
Mailbox Role Prerequisites
Failed
Error:
The Exchange organization does not support this version of Exchange Server.
Elapsed Time: 00:00:01

check out is there any watermark key in the registry - A watermark in the registry identifies where Setup failed. You will not have to answer the Exchange 2010 Setup wizard questions again when you resume a failed Setup. You can resume the failed install,
and let it succeed.
A few article for more understanding
http://technet.microsoft.com/en-us/library/ff805039%28v=exchg.141%29.aspx
http://blogs.technet.com/b/exchange/archive/2007/05/21/3402900.aspx
Exchange Queries

Exchange Server 2010 Mailflow between Internet Facing-Site and No Internet Facing-Site

Hi all,
My environment there are two sites, Internet Facing-Site and No Internet Facing-Site.
The mail flow between them, it isn't working. The messages stuck in the queue.
Default Receive Connector No internet facing-site is configured, bellow:
Defaul....
- Transport layer....
-Basic Authentication...
- Exchange Server Authentication.
- Integrated windows....
Configuration the Internet Facing-Site, bellow:
From intenet
- Transport layer....
-Basic Authentication...
- Integrated windows....
And i configured a new receive connector on the Internet Facing-Site, follow bellow:
Sites
- Transport layer....
-Basic Authentication...
- Exchange Server Authentication.
- Integrated windows....
But, the messages yet stay stuck in the queue.
Queue error:
451 4.4.0 Primary target IP address responded with: “421 4.2.1 Unable to connect.” Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
I'm needing help, pls.

Please check SMTP traffic filtering/scanning enabled on the router/firewall. You can telnet even if the SMTP
traffic filtering/scanning enabled on the router/firewall. But emails will not pass through if the configuration is incorrect.
May be speed between sites causing this issue (not sure). Anyway please try changing the Tarpitinterval as a test.
To see the current setting "Get-ReceiveConnector | Select name,tarpitinterval "To set new value "Set-ReceiveConnector “<Connector-Name>”
–TarPitInterval:00:00:010"
Try restarting "MSexchange-Transport-sevice" on both servers as well
Can you send email one-way or
both ways not working?
MAS

Share excel 2007 with more that one users and edit at the same time

Dear community members,
How can I best shere an excell workbook 2007 if I want multiple users to view and edit simultaneously? The workbook contains macros, conditional formating, and dropdown lists which I want all to be functional!
Thanks,

Hi,
You can create a shared workbook and place it on a network location where several people can edit the contents simultaneously
Just go to the Review tab, in the Changes group, click
Share Workbook.
However, not all features and functionalities are supported in a shared workbook. Please review this article for more details:
http://office.microsoft.com/en-us/excel-help/use-a-shared-workbook-to-collaborate-HP010096833.aspx
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

When using a new pc, how do you download all of your music and playlists at the same time?

I bought a new pc, and I would like all of my itunes content on here. I seem to be able to only download one song at a time. How can I get my entire library on my new pc

Hello beckyinindiana,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Best of luck,
Mario

How to record you screen using quicktime with built in input line and microphone in the same recording?

i am using th quick time record your screen option and see (when on the audio selction) that you can only either record sound from your computer or from your microphone
is it possible to have it both on one recording?

The usual audio-in options on a laptop are None / Built-in Input: Line in / Built-in Microphone: Internal microphone. There's not an option to record system audio unless you've installed a third-party extension such as Soundflower.
In any event, if you're looking to combine audio inputs, check the Audio MIDI Setup help files (Applications > Utilities > Audio MIDI Setup). Search for "aggregate."

I can not sign in to both face time and messages, each time I try I receive a msg stating that my user name or password r incorrect, i try with others friends pass word and we have the same msg, I bought my iPad from USA, and I visit the agent at Egypt,

Each time I try to sign in to face time I receive a msg stating that the user name or password are incorrect, I visit the local agent and the told me we can not do help you , they think there's an problem with the iPad as I bought it from USA

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Help with a query using ISNULL and RTRIM in the same select statement

What I'm trying to accomplish is to blend the following two statements together:
ISNULL (EMail_Address, '') As Matrix_Member_Email
AND
RTRIM (EMail_Address) as Matrix_Member_EMail
So that if the email address is NULL, it gets changed to blank and I still need to RTRIM the other entries and use the column header of Matrix_Member_Email.
I've tried:
ISNULL ((EMail_Address, '') (RTRIM (EMail_Address)) as Matrix_Member_EMail
Any help would be greatly appreciated.
Thank you,

I'm sorry. Here is the query:
--Declare @EMail_Address nvarchar(100) = null
Select SVAssociationID.R_ShortValue as MATRIX_AssociationID, Matrix_Modified_DT as Matrix_LastModified
  ,RTRIM (MLS_ID) As Matrix_MLS_ID
  , ISNULL(EMail_Address, '') AS MATRIX_member_Email
  ,RTRIM (EMail_Address) as Matrix_Member_EMail
  --,RTRIM( LTRIM( ISNULL (@EMail_Address, '') ) ) as Matrix_Member_EMail
  ,Last_Name AS MATRIX_LastName, Nickname AS MATRIX_NickName
  FROM    dbo.Agent_Roster_VIEW a
        LEFT JOIN dbo.select_values_VIEW SV ON a.Status_SEARCH = SV.ID
        LEFT JOIN dbo.select_values_VIEW BillType ON a.Bill_Type_Code_SEARCH = BillType.ID
  LEFT JOIN dbo.select_values_VIEW SVAssociationID ON A.Primary_Association_SEARCH = SVAssociationID.ID
WHERE   Status_SEARCH IN (66,68)
    Order by MLS_ID
Results:
MATRIX_AssociationID
Matrix_LastModified
Matrix_MLS_ID
MATRIX_member_Email
Matrix_Member_EMail
MATRIX_LastName
MATRIX_NickName
STC
09/02/14
CCWILLI
[email protected]
[email protected]
Williams
Christine
STC
09/12/14
CCWORSL
[email protected]
[email protected]
Worsley
Charlie
STC
09/02/14
CCYROBIN
NULL
Robinson
ECBR
09/02/14
CDABLACK
[email protected]
[email protected]
Black
Dale
STC
09/02/14
CDABRADY
[email protected]
[email protected]
Brady
David
Thank you,

When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

Exchange Server 2010 Mailbox Role Installation Problem

I got Error in Install Software Exchange Server 2010 64 bit. Which I am Given Below.
1. Active Directory Does not exist and can't be Concatenated.
2. This System Has no Domain.
please help me regarding install Software and please give any solution.
How to Install.

Hi,
We can't install the actual Exchange server role on Windows 7, we can install the Management Tools on it. For more information about this, please see the "Supported operating system platforms" section in the following article.
http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx
Do you want to install Exchange 2010 Management Tools on Windows 7 64-bit?
If so, please make sure you meet the Exchange 2010 system requirements.
You can refer to the following article to install the Exchange 2010 Management Tools.
http://exchangeserverpro.com/exchange-2010-install-management-tools/
Best regards,
Belinda
Belinda Ma
TechNet Community Support

How to install and configure Exchange Server 2010 DR (disaster recovery) on Windows server 2012.

We need to install and configure Exchange Server 2010 with DR(disaster recovery on Server 2012.
Pls suggest step by step.
Pankaj Kumar

Hi,
Here is an article which may help you for your reference.
Deploying High Availability and Site Resilience
https://technet.microsoft.com/en-us/library/dd638129(v=exchg.141).aspx
Besides, there is a related thread here.
https://social.technet.microsoft.com/Forums/exchange/en-US/577c9433-a20b-442e-8ce7-be59aea35855/preparation-for-deploying-exchange-2010-servers-at-remote-site-dr-site?forum=exchangesvrdeploylegacy
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support

Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

Similar Messages

Maybe you are looking for