Installing second hard drive - boot problem

I have a Maxtor SATA hard drive that I had installed in my G5. It is use only for client project files - no operating system or programs have ever been installed on this drive. It worked great in my G5. I recently upgraded to an Intel Mac Pro and so I pulled the drive and installed it. With the drive installed it won't even boot. All it does is keep repeating the start-up chime. I tried it in several of the open bays and it did the same thing every time. When I pull it back out, it boots without a problem and when I put it back in the G5 it is recognized without a problem. Any thoughts of what could be the problem and solution? I really need to get this back, as I mentioned it contains all my client projects.
Thanks.

Disk Utility - Erase (drive, not volume) and make sure it is now GPT/GUID and not old Apple Partition Table format.
Even though it is data only, there can and are some problems (the older it was last formatted the more so perhaps).
Just pull the data off if needed. Handy to have a FW drive case for SATA laying around.
Migrating OS and apps from G5 to Intel is full of potential pitfalls.
Depending on the drive age, size, performance, I'd probably go for a WD Caviar 640GB $75 to transfer files onto, and then wipe the Maxtor and use it for an emergency backup drive off which you can run Disk Warrior and such.

Similar Messages

What do I need to install second hard drive HP PAVILLION: p6633w

what do I need to install second hard drive HP PAVILLION: p6633w?
This question was solved.
View Solution.

donp815 wrote:
what do I need to install second hard drive HP PAVILLION: p6633w?
Hi,
You need two cables, one is a sata cable:
http://www.play.com/PC/PCs/4-/30305659/706331346/StarTech-com-6in-SATA-to-Right-Angle-SATA-Serial-AT...
This cable is only for data and connects the hdd to the SATA connector on the motherboard.
The other cable is for power:
http://www.itpartsdirect.com/startech-15-24cm-4-pin-molex-to-sata-power-cable-adaptor.html
This connects the hdd to the PSU.
You can also buy a combo cable like this:
http://www.amazon.co.uk/dp/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4
All you have to do now is to connect the hdd and that's it. Make sure that the primary drive with the operating system is connected to the primary SATA connector (I think there are numbers 1, 2, 3..)
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Problems installing second hard drive and second DVD recorder

I have tried about every combination of tricks to install a second hard drive. I want to add a 250GB, WD IDE hard drive to my 3000J 115 7387A32 on the IDE channel. I have set up the bios then added the drive and the reverse but cannot get computer to boot in either case. It locks on the first screen where is says hit Enter to.... Enter makes the text go away, but nothing after. I am trying to install it as a single drive on the secondary IDE channel.
I know the HD is good as I removed it from another computer. It does have Win XP on it. I will format it using Vista IF I can get it installed.
Basically, I am having the same problems within stalling the second DVD, which is SATA.

Your initial hard drive should be jumpered as Master. When you install a second hard drive it must be jumpered Slave. There should be a diagram on the case of the HD showing the jumper locations.
Power Macintosh G3 and G4: IDE Master and Slave Support and Configuration
http://docs.info.apple.com/article.html?artnum=24342
Power Mac G4: Installing Internal Storage Devices
http://support.apple.com/kb/HT1815
 Cheers, Tom

Problems installing second hard drive in HP Pavilion M7-1015dx laptop.

I just bought a new HP Pavilion M7-1015dx. I have successfully installed an SSD drive as the primary hard drive and now I want to use the 1tb hard drive that the computer came with as data and install it in the second hard drive bay. I have a cable that I used from my old HP DV7 when I had a second hard drive but I am having issues with my M7-1015dx laptop.
When I plug the sata cable into the second connector on the laptop and attach my hard drive (I have tried several hard drives) and go to power the laptop on, the power light just blinks a few times. Now I know there is something wrong for I just purchased the laptop two days ago... I got the idea to try the cable that I used to plug into the second connect to check and see if I plugged it into the first and I got the same issue, power light blinking. So I am wondering if it is the cable... is this possible? Are there different rated sata cables? I also tried the cable the came with my new laptop to make sure that it just wasn't the second port - I tried plugging it in to the second port with a hard drive attached and the laptop this time turned on but asked for a bootable disk because it requires boot disk to be in the 1st hard drive bay connection which I knew. I just want to give all the information so that I can get this fixed.
Please help me

Hey Brother-Brad,
I'm sorry you're running into issues installing a second hard drive. Your issue may not be the cable. Do you have a working hard drive installed currently with Window on it?
If so,
1. In Windows, Click the Start button.
2. Type 'hard disk'
3. Click on 'Create and format hard disk partitions' (aka Disk Management)
4. Look at Disk 0 listed at the bottom in the middle. Does it say Basic or Dynamic?
5. If it says Basic, right-click it and select Convert to Dynamic.
Hard drives must be set as Dynamic for dual hard drives to be recognized.
Let me know the results when you get a chance

Can I install second hard drive on PC?

Hi. I just wondered whether I can install a second hard drive on my PC.
The present Sata hard drive has 640 GB capacity.
If there is a spare port for a second hard drive, is there a maximum capcity limit?
And would any make of Sata 3.5" hard drive be suitable? I would be grateful for any advice.
Thanks,
laurencewithau
This question was solved.
View Solution.

Great. Glad to help. One Laurence to another. I do not see my name spelled right ( my way ) very often.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Install Second Hard Drive On HP Pavilion DV7-4270us Laptop

Hi,
My laptop has a space for a second hard drive but no connectors. I am using Windows 7 Pro 64-bit and would like to add a second drive in that slot. My main drive is 1TB and I am running out of room. Currently I am using a 1TB external but it is cumbersome when traveling. What must I do to use the second drive?
TIA,
Marty
This question was solved.
View Solution.

Hi Marty,
An example of what you need to use the 2nd HDD bay is on the link below.
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Possible to install second hard drive in Pavillion p6110f

Is it possible to install a second hard drive, 1TB Seagate, into the expansion slot on my Pavillion p6110f??
This question was solved.
View Solution.

Hi,
Your PC has a hard drive cage that will accomodate two drives. This HP How-to document starting at Removing a Drive a hard drive will show you the process for removing the hard drive cage.
If you still want to use the Expansion Bay then you will need a 5.25" to 3.5" adapter bracket. NewEgg.com would carry such a bracket. You will also need a SATA data cable. This HP How-to article will give you an idea on how to use the Expansion Bay for a 5.25" device. Check up by the existing optical drinve for a spare SATA power connector. If one is not available then you will need to use a SATA power splitter.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How to install second hard drive in Satellite A200-1BW?

I see my new Satellite A200-1BW has two hard drive bays,on looking into the second bay I cannot see how a second drive can be fitted as the plug in socket appears to be missing.
What parts do i need to fit to fit a second drive as they are held in stock by my local computer outlet and are quite cheap,can anybody advise me on part numbers etc of the bits I need.
Thanks
Steve

Hi,
there are many different models of your machine on the market and some of them have a second drive, some of them not. If you bought a model with one drive then you will only be able to install ONE drive because your model was only intended to have one drive.
And even if you solder a connector to it or attach it in any other way then you dont know if the bios supports the second drive.
My suggestion on it: obtain a USB-HDD and store your data on that drive. Would be making more sense then spending a lot of time on investigation to find out that your mainboard is not able to handle a second drive.
Cheers

Swapped hard drive boot problem

Swapped hard drives between 6530b and 6535b, neither boots. What did I miss? (Toshiba MK3255GSX and Hitachi HTS543223L9A300)

Disk Utility - Erase (drive, not volume) and make sure it is now GPT/GUID and not old Apple Partition Table format.
Even though it is data only, there can and are some problems (the older it was last formatted the more so perhaps).
Just pull the data off if needed. Handy to have a FW drive case for SATA laying around.
Migrating OS and apps from G5 to Intel is full of potential pitfalls.
Depending on the drive age, size, performance, I'd probably go for a WD Caviar 640GB $75 to transfer files onto, and then wipe the Maxtor and use it for an emergency backup drive off which you can run Disk Warrior and such.

Moving pictures & catalog to newly installed second hard drive

Hi!
I just checked John's file (http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Move_your_photos_1) on moving files. My friend, a real non-technical guy, had a second drive installed on his computer. Up to now he only had one physical drive with C: and D: logical drives. All his pictures are sitting on the D: drive and there is nothing else on that drive.
I am supporting him remotely in Vancouver, BC from Austria (with logmein.com).
The new drive, 500 GB, is formatted and the chap installing it gave it the drive letter J:
My questions:
1) I change the drive letter D: to say X:, change the new drive's letter to D: and then do a disk copy from from X: to D: will this work?
2) Have my friend do a normal backup to his external USB drive and then do a restore with "Restore to original folder location" to the new J: drive and he uses from now on J: drive. Check that the Preferences are set correctly.
3) Simply move with Organizer all files to the new J: drive, leaving the catalog on the D: drive.
4) Any other good ideas? My friend has about 9,000 pictures on the file, probably quite a few disconnected ones.
Thanks and have a nice day!
Alexander
(Waiting for October 9th and PSE 8 as announced on Amazon. Surely John you soon will have another long list of items to add to your index! GGGGG!)

Alexander,
Using Display > Folder Location view to move the photo folders is the most straightforward way of moving the photos to a new drive, as described in the FAQ you referenced:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Move_your_photos
The question remains of what to do with the catalog folder:
1. Is it on the C drive (where it usually resides) or the D drive?
2. If it's on the C drive, there's no harm in leaving it there -- it uses relatively little space.
3. If it's on the D drive, and your friend doesn't mind leaving it there, then leave it there.
4. If your friend really wants to move it from the D drive (e.g. so he can free up that drive and use some partitioning tool to merge D back into C), then he'll need to move the catalog folder:
a. If he's on PSE 7, he can safely move the catalog folder using File > Catalog > Move.
b. If he's on PSE 6 and he doesn't have any projects (e.g. slideshows) or files archived to DVD/CD, he can safely move the catalog folder using File > Catalog > Move.
c. Otherwise, he'll have to use the backup/restore method (rather than Display > Folder Location view) to get the catalog folder moved along with the photos to the J drive.

How do I access new second hard drive?

Hi! I am newbie, I am sorry if this a dumb question...
How do I access my second hard drive?
This is what I have:
SparcStation5 170Mhz, 192MB memory.2HDD (one 4.3GB w/ OS, second Hdd 4.3GB)
I had my sparc working with Solaris 8 just perfect!
I added the second hard drive, no problems, I formatted the HDD from withing Solaris OS, (I can probe-scsi from openBoot promt and it showes OK), everything is OK so far, I can see the send hard drive using format, I can partition it and create slices on it, everything seems to be OK, I have no problems making partitions and everything on that Hdd. But when I try 'ls', I can't see anything on that disk, any suggestions? I tried several ways from my manual/book, including mount and it reads 'no acces point on mount' or somthing like that.
this is what I see from format command:
disk 0. (seegate 4.3GB.....) this is my new hard drive (already formated and partioned, I created a new partition /usr with 3.75GB on partition 6. Partition 3 is used by the hdd with a totoal of 4GB . this shows as c0t1d0
disk 1. (SUN4.2GB) this is the hard drive with the OS Solaris 8. this is c0t3d0
Am I missing something?
Thanks!
Murillo

hi there ...
read below--
Find out the address of the drive
STOP+A
At the OK prompt, type probe-scsi. This will list all scsi devices on the system. Find the new drive.
Type boot -r so the OS will see the new drive.
Login as root and type format. Pick the new drive. The drives are listed as c(controller #)t(scsi id or target #)d(disk #). Label drive is required (it will tell you if the drive is not labeled).
Next, type partition. Partition the drive as required (always leave partition 2 as the whole drive as it is informational to the OS
Type print to list the current partitions. When you are done making changes type label
To return to the OS prompt, type quit twice
newfs /dev/dsk/DRIVE-ADDRESS
(ie c0t1d0s0) (controller 0 target(ID) 1 disk 0 slice(partition) 0).
mkdir directory, where directory is the directory you want to mount the drive on
(ie, /disk2)
mount /dev/dsk/DRIVE-ADDRESS directory
Add the new drive to your /etc/vfstab file.
(ie. /dev/dsk/c0t1d0s0 /dev/rdsk/c0t1d0s0 /disk2 ufs 1 yes - )

Hello, I have a G5 PPC. I want to install a copy of Entourage on the second hard drive. Can I do that or will it create problems for the processor?

Hi everyone
I had a very old intel iMac from late 2006 which was dying now dead. I just managed to copy the Entourage folder onto an external hard drive before the iMac gave up the ghost. But I could not open the Entourage copy on the G5 PPC. each time i tried to do so the PPC copy of Entourage would open instead.I have emails on the PPC copy and do not want to lose them. I was wondering if it would be possible to install another copy of Entourage on the second hard drive? I was hoping that by doing that I could access the information from the iMac which has been copied to an external hard drive.
Any help would be very very welcome.

I don't think MS lets you install Entourage outside of an active system folder. However, you can install a fresh copy of Entourage on the G5's hard drive (if you have Office 2008 or lower), then use Entrouge's Import command to move the data files from the old hard drive.
We're done this several times as we've upgraded either computers or Entourage.
However, I think that, before you act, you should also ask in Microsoft's user forums here:
Office for Mac forums
They are excellent and often an employee of their Macintosh unit will assist in answering.

Installing windows 7 on second hard drive in macbook pro 7

Dear fellow forumers. I am currently having trouble installing windows 7 on my second hard disk as whenever I restart my laptop after the bootcamp assistant has made a partition in the HDD, instead of going into windows installation, my laptop screen shows a blank/black screen with a blinking dash at the top corner. I am currently using a 15" macbook pro 2011, installed an OWC ssd as my primary hard drive where I run my os Lion and windows (in another partition). Due to insufficient disk space with the applications in both OS, i am now attempting to install a second windows 7 in a second hard drive which I split the HDD equally into two partitions (one formatted for windows installation and the other for data storage). Just for the information, I am also installing the windows 7 via an external optical drive.
I have been running out of wits as I have been researching whole night about possible oslution but it seems that my problem is quite a peculiar one. Will really appreciat any help that I could receive.
lastly, is it possible to run parallel desktop from my ssd (Primary hard drive) and then attempt to import the bootcamp from my second hard drive?

Well it's not particularly hard, I just don't see why its necessary. It seems silly that I've got to physically start removing hardware from my computer just to get an OS to install on a specific drive.
I was under the impression the Boot Camp gave the option of where to install Windows, as in other drives from the ones with OSX on them.

I cannot install a music software (from east west) in my second Hard drive

I have a mac with two hard drives.
The second drive is partitioned into two data drives.
Whenever I am trying to install a new software it gives me only the choice of installing it in the main hard drive (boot drive that came with the mac).
The other two partitions of the second hard drive show a red exclamation mark.
The reason I do not want to install the software to the old hard drive (boot) is only because there are 50GB left and the software I need to install is 117GB!
Please help me figure out what is the problem.
The only reason I purchased the second drive was only because I wanted to install that software ...
Thank you

You mean to clone the existing boot drive so one of the partitions is a boot drive?
Yes.
If yes, I did it and it did not work..
Some installers require that the drive be the active startup disk. Restart the computer with the Option key held down, click on that drive, and press Enter.
(46814)

Can I configure my HP dv7-4165dx to boot from the second hard drive?

I have had an HP dv7-4165dx for about 20 months now. About 10 months in, the original hard drive burned up because of the placement directly under the GPU (bottom left corner, left of the touchpad and below the keys), which gets hot enough on the top side to make your hand uncomfortable. The symptoms included blue screens, troubles on startups, and finally a system message on boot that said the drive was damaged. Since it was under warrantee, I carried it to Best Buy to have the drive replaced, which took nearly 2.5 months.
Now, at about 20 months, I am facing the beginning of the exact same symptoms. I noticed that there was a second hard drive bay, away from the GPU, so I purchased the wire needed to use that bay. Now it tells me that there is no bootable disc installed (the hard disk test, in system diagnostics, knows it is there) . I am sure I can swap the drive back to the original bay and be fine but that puts me out $75 for the kit from HP (yeah, I know I may have to eat that if there is no way), but far more importantly it means that I will have another burned out drive (losing everything, again) within a month or two.
I have looked but I can't seem to find any way to tell it boot from that drive. Is there a way, or am I just out of look due to a poor design? It's been a great machine, except for this issue.
This question was solved.
View Solution.

Hi,
Unfortunately there is no option to be able to boot from the HDD in the 2nd bay in any of the dv7 series - sorry for the bad news.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Installing second hard drive - boot problem

Similar Messages

Maybe you are looking for