Installing second TC on network - do I need to reinstall software?

I am already using one TC on our network. This is a dumb question and I know I could just call tech support but I am short on time and don't plan to do this until later this week. Do I (or more importantly should I) run the CD to install TC #2?

edbedb wrote:
I am already using one TC on our network. This is a dumb question and I know I could just call tech support but I am short on time and don't plan to do this until later this week. Do I (or more importantly should I) run the CD to install TC #2?
short answer, no.
just use airport utility to introduce the unit to your network.
good computing

Similar Messages

  • How do you download Lightroom if you need to reinstall software on computer???

    how do you download Lightroom if you need to reinstall software on computer???

    Answered in your other thread.

  • Do I need to reinstall software prior to restoring data from time machine?

    I only have working files backed up via time machine.  Do I need to reinstall all software PRIOR to restoring from my time machine backup?

    I may have misunderstood your question. But, if you have an application such as Photoshop or Word, (from what you say neither of which are backed up by TM) and their files are backed up (ie., Photoshop image files and Word text files), I see no reason why you cannot restore individual Photoshop and Word files. I have done that by choosing "Enter Time Machine", navigating back in time to the desired file and pressing the big "Restore" button at TM's window, bottom right. I have never needed to restore the parent applications.

  • How to reinstall iphoto on my iMac.  it is currently installed but wont open and says i need to reinstall from appstore

    my iphoto is not working and it says to reinstall from appstore but in the appstore it shows already installed and there is no option to reinstall. do I need to try to move my current iphoto to the trash? if so what about all my pictures

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • ITunes was not properly installed. If you... you need to reinstall.

    Hello to everyone, I'm sorry for my English, I'm writing from Italy.
    I've got 2 Acer PC with Windows 7 64-bit.
    On the first iTunes works well.
    On the second, every time I launch iTunes, I receive this error message.
    Acer Support says: iTunes' 64 bit bug is a problem: it can't reconoize DVD unit.
    What can I do?
    I try with GEAR drivers but without success.
    Thanks!

    Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite Pro L350
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver Not Available
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00BDADBC02988E80
    Current user is not an administrator.
    The current local date and time is 2012-09-03 16:32:37.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.6.3.25 is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

  • If I install Mavericks to my MBP, will I need to reinstall my other programs?

    I don't need a clean install, since my computer is less than a year old, and I keep it pretty tidy anyway since I have an SSD. I can just upgrade and keep everything, right?

    Awesome, thanks guys. I always keep two backups anyway, I've had some nasty mishaps between dropped externals and computers kicked off beds which lead to me losing all of my files.
    Now the other question that I should have mentioned, will having Bootcamp affect this installation in anyway whatsoever? I have plenty of space left over on both sides of the partitions.

  • When installing the new OS Lion, do you need to reinstall the programs currently on your Macbook Pro such as Photoshop and Lightroom?

    Any feedback would be greatly appreciated,
    Thanks

    It depends how you do it. If you do the auto update - i.e. you download Lion and let Mac OS do everything for you, then the answer is 'No'. It will try to install all apps that are compatible with Lion.
    However, that may not be the best way to upgrade, especially if you have a lot of legacy material. I wrote a post on my blog about upgrading which you may want to consider: http://applehelpwriter.com/2011/10/17/upgrading-to-lion-the-golden-rules/

  • Lightroom 5 for CC is showing it's been installed even though I uninstalled it. Need to reinstall

    This is driving me nuts because I have a deadline. I unistalled lightroom 5 because of a tethered capture issue I was having. I inteded to reinstall it but the CC desktop app is showing it's installed. Please help! Thanks in advance.

    Hi tbarnesarc,
    Please follow the troubleshooting steps mentioned in the KB : http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml

  • Just Got New MBP and need to reinstall Software

    I just got a 15inch MBP and installed Final Cut Studio 2 which I did not know was 55 gigs. I want to install it on an external HD so I want to reinstall Leopard with my disc I received when I bought my MBP from Apple. Will I still get all of my extras such as ilife with my install disc and will it restore it to factory (as I received it when I first bought it?) Thank you!

    An 'erase and install' will remove EVERYTHING from your harddrive, and if you've already got Leopard installed, that's your only option.
    Reintalling Leopard will NOT install iLife; to my knowledge there are no Leopard+iLife 08 install DVDs. . . just Leopard DVDS. I may be wrong, as I have an old Mac and not a new one, which may come with a software package I've never seen (but I'm getting my GF a new MBP for Christmas!!). I think you need to (and should have) a seperate iLife 08 disk with which you can reinstall iLife.
    A couple of questions and some advice:
    -I assume you have at least a 120gb harddrive. Why do you want to install FCP2 onto an extrnal DVD? If you plan to use that space to store media, it would be a better idea to store the media (i.e. the video footage, etc) on an external drive and keep your FCP application on your internal HD.
    -Also, if you are going to run FCP on an external HD, get a FIREWIRE 800 external HD. They are quite a bit more expensive, but I had a LOT of problems just using FCP1 to edit footage stored on an external USB HD . .. I can't IMAGINE the problems you would have running FCP2 off of a USB external HD.
    -Thinking about it again, where are you going to store your footage? On the same external HD as FCP? I think that will work . . .
    Looking forward to hearing more!
    CMF
    Message was edited by: Smileswearily

  • Raid and replacing a disk, do i need to reinstall software? (RAID 10)

    I have 4 250GB disks inside the Mac Pro, the first two are striped and the second two mirror the first two.
    This gives me, perfprmance and some redundancy (I think) I have only 500GB available in this config so it is quite expensive, but works for me, my question is
    "Can I replace the first disk from the set of four and then rely on the mirrord disks (3+4) to write data to the first disk, therby negating my need to do a restore?
    Can I use he mirror function (almost a hot swap scenario)?
    Views appreciated

    The final chapter is this saga,
    I replaced the disk and restarted my system, Disk utility was showing "degraded" for the raid config, I formatted the new drive created a new striped set but could not get the mirror to resynchronize , I tried the command line approach but after some time I was unsuccessful in getting the mirror to rebuild. So I thought this would be a good time to scratch all four disks and try softRAID as a solution, I purchased a full license but I discovered that softRaid only supports RAID 0 or RAID 1 and is not able to create a RAID 10 configuration. (James from SoftRAID explained that this was something being looked at for the future but one of the complexities was how to best represent RAID 10 graphically).
    In the end I went back to Apples Disk Utility tool to create my RAID 10 config (ie disk 1 and 2 striped to create set A, disk 3 and 4 striped to create set B and then set A and B mirrored together), restored from backup and all is well.
    I still need to figure out/learn how to add a replacement disk and then get the mirror to rebuild, but I proved that I could remove any one disk and still have a fully working/bootable system. Almost there......

  • Need To Reinstall Softwares For Zen Vision: M3

    Lost All Installation CDS.
    Questions:
    . Are all softwares available on Creative?Support/Download? Or can I purchase the installation CDs from Creative?
    2. I need main software to synchronise with the MP3 for music and video files. Is the below the?main software?
    Creative MediaSource Player/Organizer 5.0.38 ([size="" color="#222222">39.77 MB) [size="" color="#222222">22 Dec 06?

    Tecra M3-S636
    I would get the driver and utilities from here, since many have probably changed.
    Install the chipset software followed by the display driver prior to any other drivers. Install the Common Modules before any other Toshiba utilities. I have attached the suggested installation order for the European equivalent of your model.
    -Jerry
    Attachments:
    install.txt ‏4 KB

  • Uninstall is incomplete and I need to reinstall software - don't know what to do

    Hello,
    After cleaning my hard drive Illustrator couldn't open any of its own .ai files and it was suggested in the forum that I reinstall CS6.  So I did an uninstall in Vista but found more CS6 lurking around in other directories, including fonts, .dll files and more.  How do I proceed with a clean uninstall?  Adobe has a history on my systems of making a mess and creating conflicts within itself and previous versions of itself.  I'm afraid to just delete the files and proceed. My system just gets slower and slower.   I have CS2, CS3 and (had) CS6 on my Windows system.
    I bought CS6 about 3 weeks ago.  Everybody here knows what it costs.  I realize it's not the most current version but if they're still selling it they should support it.  The sales rep promised I could get good support and gave me an 800 number for tech support.  When I called the 800 number I was told this product was no longer supported by phone.  Called another number.  Same rejection but as an added bonus it hung up on me. Went online to chat for help.  "Chat is not available right now."  No explanation offered or info as to when it will be open, if ever.
    Here I am with $2000 worth of software that's not working and no where to get help.  Experts, help!  I need some experts. 
    Thanks...

    See here
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • I need to reinstall software.... but I can't find the serial # now

    Unforunately my hard drive crashed and required an erase and install at the genuis bar. We were able to do a backup to an external drive, but apps wont run on it for some reason.
    I can't find the serial # for this product. I was able to install final cut express 2, but not the newer HD version. This is a registered product, but how do I see what products I've registered? Does it have the serial # there?

    If you have the receipt, you can call Apple and they can issue you a new one. I went through this same thing. The downer is I purchased everything through Apple, but they do not store any of your serial #'s; even though, I registered everything as well. Bummer...
    I found the receipts for 5 of 8 applications. So, I'm out 3 apps. Big bummer!
    Good luck and HAPPY HOLIDAYS!

  • Do I need to reinstall desktop environment for each user?

    Hello,
    I have installed xwindows and the i3 desktop environment on my root account by mistake.  I created a user account and logged into it, but I could not start a xwindows because it wasn't installed on that account.  Do I need to reinstall everything on the new user or is there a way to copy everything over?
    Thanks

    offtopic @Xyne
    What I am still wondering is if using xorg wrap is a hack as opposed to some "cleaner" systemd solution.
    Well, simply not using Xwrapper.config, then Xorg will handle this on it's own (see man page extract below). I don't think Openbox has problems with this, so I think the problems you had would have to be looked at separately. But maybe better on their own topic...
    'man Xorg.wrap'
    By default Xorg.wrap will autodetect if root rights are necessary, and if
    not it will drop its elevated rights before starting the real X server. By
    default Xorg.wrap will only allow executing the real X server from login
    sessions on a physical console.
    When auto-detecting the wrapper will drop rights if kms graphics are avail‐
    able and not drop them if no kms graphics are detected. If a system has
    multiple graphics cards and some are not kms capable auto-detection may
    fail, in this case manual configuration should be used.
    You're a bit late on that one

  • What do I need to install second hard drive HP PAVILLION: p6633w

    what do I need to install second hard drive HP PAVILLION: p6633w?
    This question was solved.
    View Solution.

    donp815 wrote:
    what do I need to install second hard drive HP PAVILLION: p6633w?
    Hi,
    You need two cables, one is a sata cable:
    http://www.play.com/PC/PCs/4-/30305659/706331346/StarTech-com-6in-SATA-to-Right-Angle-SATA-Serial-AT...
    This cable is only for data and connects the hdd to the SATA connector on the motherboard.
    The other cable is for power:
    http://www.itpartsdirect.com/startech-15-24cm-4-pin-molex-to-sata-power-cable-adaptor.html
    This connects the hdd to the PSU.
    You can also buy a combo cable like this:
    http://www.amazon.co.uk/dp/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4
    All you have to do now is to connect the hdd and that's it. Make sure that the primary drive with the operating system is connected to the primary SATA connector (I think there are numbers 1, 2, 3..)
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Maybe you are looking for

  • Computer no longer Sleeping

    I have an iMac G5(2nd Gen) with Leopard (10.5.3) and my computer will not sleep no matter what I do. I tried ejecting all external drives (Firewire and USB), turning off all USB devices, disconnecting from my wireless network, quitting all running ap

  • How can i make x-axis even distribution in line chart?

    can i change the min value, max value of x-axis?

  • Adobe Elements 9 won't open new project.

    My version of Adobe Elements 9, bought in April 2011 for my PC with Windows 7, won't allow me to open a new project. All I get is a greyed out prompt that won't go anywhere. It will open a prior project. I haven't used the program in about 9 months.

  • Issues With States

    Hello everyone, I have been working on this little project and it is almost complete but I am running into some problems with the way the states are interacting I will show you the code. [CODE] <?xml version="1.0" encoding="utf-8"?> <mx:Application x

  • How do i get my album?

    i purchased the Motown 50 album (not the love one out now the one before it for the 50th anniversary of Motown (black cover big gold M and number 50) before Christmas and i just got a new phone with more storage and wanted put all my music on it. I h