Installing Security and Compliance Manager on Windows 8.1

Hi
I am trying to install Security and Compliance Manager on my Windows 8.1 workstation.  The install is trying to install SQL Express 2008 which seems to not be compatible with Windows 8.1 and that is were the install ends.
I tried installing SQL Express 2012 and then running the install but it looks like the database is not installed.
Is there a new version of Security and Compliance Manager that addresses this or does anyone know how to set up SQL to accept Compliance Manager?

Open Regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
Delete this key under Session Manager "PendingFileRenameOperations". Restart the installation and it will work fine.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

  • Just installed CS6 and trying to update, Windows 8.1 tried disabling security still not updating. Version 13.0 any suggestions ? Thank you

    Just installed CS6 and trying to update, Windows 8.1 tried disabling security still not updating. Version 13.0 any suggestions ? Thank you

    Once in awhile, they do have bug fixes for CS6. The only thing I can think of that was an upgrade for CS6 was a newer version of camera raw. For now they are allowing CS6 to have the latest version of camera raw, but when they are done with supporting CS6, I imagine that will be the last of the upgrades. I don't know of any dates, but I heard it wasn't for a long time if at all. So I guess we will all have to wait and see.
    As for getting updates, I think you will like the manager. It makes it much easier. Frankly I didn't know the manager worked on the perpetual license. I knew it worked on the subscription. So it is good to know that it works for you as well.

  • Be Your Company's Security and Compliance Goalie

    You get what you measure, so make sure you measure right. Click here for a checklist of 10 metrics to help you determine if your security and compliance program is working. (no form required)
    This topic first appeared in the Spiceworks Community

    Azure HDInsight now available in the Azure Preview Portal Today, we are announcingAzure HDInsight will be available in the Azure PreviewPortal in addition to the existing Azure portal.The Azure Preview Portal was announcedlast year and delivers a reimagined management portal simplifying resourcemanagement, providing integrated billing and offering a rich gallery ofapplications and services. By providing Azure HDInsight in the Preview Portal,you also gain access to the Azure Resource Manager framework (ARM)which includes: New and updated tools like the portal interface, PowerShell cmdlets and new .NET SDK packages. The PowerShell cmdlets and .NET SDK packages will be available later this week. Resource Groups will allow you to deploy groups of resources and control who can manage and create resources in your subscription.For more...

  • I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it  loses my  computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

    I wanted to install windows for Mac and I had vista so I put I the disk and installed  followed the steps it then it  closed my  computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

    The two other posts are correct... so I'll just clarify.  What's happening right now is your system is trying to boot into Windows in order to finish the installation.  What you want to do is make it boot into OS X.  As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on.  You will eventually be presented with an option to select which partition you would like to boot from.  Choose OS X.  After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X.  What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
    Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition. 

  • How To Install Informatica and DAC Client on windows

    Dear Friends,
    I had installed Oracle Informatica 8.6.1 and Oracle DAC Server (10.1.3.4.1) on Linux server (RHEl 32 bit)
    Now i want to install Informatica and DAC Clients on windows machine.
    Where to download the software and in the existing Dump i don't find any install.bat file / client folder as mentioned in some sites.
    Please help
    Regards,
    DB

    Hi,
    When you have downloaded the informatica software you will get 2 zip files (V20952-01_1of2.zip,V20952-01_2of2.zip). When you Unzip these two files you will find pc861_client_win32_x86.zip file.
    Unzip this pc861_client_win32_x86.zip file and browse to this location pc861_client_win32_x86\Client\Disk1\InstData\VM, here you will find install.exe an executable file.This will install informatica client.
    For installing DAC browse to this location DAC 10.1.3.4.1\dac\Disk1\install\win32 and there you will find setup.exe executable file. This will install DAC.
    If you need further information plz do post it......
    Thanks,
    Navin Kumar Bolla

  • How to install Oracle imaging & process management in windows xp prof

    Hi All
    I am trying to install oracle Imaging & Process management in windows XP. Please let me know whether it is possible in windows XP or not... which I couldn't able to install in XP. when I saw the Install doc, it mentioned it is possible in windows server 2003. Installation guide mentioned that we have to setup 6 or 7 different server setups.
    or
    If any one have I/PM installation steps for windows server 2003 Please provide the steps.
    Any input would be greatly appreciable.
    regards
    Vijay

    Vijay,
    IPM is not certified to be installed on Windows XP (as for IPM services).
    It is possible to install IPM on one server machine (or two, if you need Web). First, you have to decide, which services you have to install.
    regards
    Jakub

  • Big Fish Games stop working in Mavericks.  What do I do? I have re-installed them and the manager app, and nothing.  I have not gotten an answer from Big Fish tech staff.  Thought the problem might be with Maverick.  all the games worked with Snow Leopard

    Big Fish Games stop working in Mavericks.  What do I do? I have re-installed them and the manager app, and nothing.  I have not gotten an answer from Big Fish tech staff.  Thought the problem might be with Maverick.  all the games worked with Snow Leopard
    Any body have this kind of problem.  What was done to correct it. . .

    I can't wait to get a new phone as well. LG Revolution owners should be comped for this phone if Verizon intends to keep them as customers.

  • Installing Forms and Reports 6i on Windows Me

    Has any one found a work around to install Forms and Reports 6i on Windows Me, I keep getting an error message. I already have Oracle 8i Personal Edition 8.1.5 installed and working on my machine.
    Thanks,
    Brent

    Hi Jan,
    I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
    Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
    Hope this helps,
    Frank

  • Where can I download EGRCM8.0(Governance, Risk and Compliance Manager)

    hi all, i would like to know where I can get EGRCM 8.0(Enterprise Governance, Risk and Compliance Manager)? i can't find it in the Download page.

    Have you tried http://edelivery.oracle.com ?
    HTH
    Srini

  • HP Backup and Recovery Manager for Windows 7

    I installed all the softwares and drivers that came along with the HP upgrade DVD. But, I find that the Backup and Recovery Manager missing on the DVD. Is there a Backup and Recovery Manager for Win 7? I liked the backup and recovery manager that was available on my Vista when I bought this laptop but is now unavailable because of the upgrade!! Any solutions for this? I do not want to use the default Windows Backup as I do not have a separate HDD at the moment to store the backup there and do not wish to populate my local hard disk with backup data!! Thanks.
    This question was solved.
    View Solution.

    Yea, basically. There's no working program for your laptop so it seems that you can use from within Windows 7.
    However, if you have problems, recovery discs will work. As well, if your recovery partition still exists, you can still access it by pressing F11 when you see the HP logo at startup.

  • Photo and Contact manager for Windows Vista

    I have a Mac but, was helping some people I know set up their iPod Classic and was wondering what Photo and Contact manager on a PC is used to sync to Windows Vista.
    Thanks,
    Barry

     I have had the same issue, this is the work around that cleared it on the t61p
    a) downloaded TVT SU 3.14 exe package from Lenovo web site
     - http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel​...
     - the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-72758
    b) un installed  power management
    c) un installed TVT SU and cleared directory under  http://forums.lenovo.com/lnv/board/message?message​.uid=135306
    d) installed the TVT SU package
    e) launched the TVT SU and it downloaded TVT PM and other stuff

  • Cannot open Catalog Manager and Job Manager on Windows 7 (11.1.1.6.2 BP1)

    Hi,
    We recently upgraded to OBIEE version 11.1.1.6.2 BP1 and installed Client tools from the same version (downloaded from Oracle Support). Once installed, ODBC connections are created to connect to the BI Server and we are able to connect to BI Server using Administration Tool. But Catalog Manager and Job Manager are not opening.
    Is there any setup missing to make Catalog Manager and Job Manager work?
    Thanks in advance.

    Hi,
    It is a known bug. Please find the solution here.
    http://123obi.com/2013/02/unable-to-open-catalog-manager-obiee-11g/
    Cheers,
    Kalyan Chukkapalli
    http://123obi.com

  • Need Help Installing Rescue and Recovery 4.3 Windows 7

    Hi there,
    So I'm having a strange issue installing Rescue and Recovery 4.3 on my TP T61.  I keep getting an error message stating: "It is required to install the Microsoft Visual C++ 2005 Redistributable (x64) Service Pack 1 before you install the Rescue and Recovery program."
    I have already installed C++ SP1.  I've also tried installing/uninstalling it as well.  Still no luck!
    Here is a link to the installer:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73612
    And here is a link to the C++ SP1 file:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=200b2fd9-ae1a-4a14-984d-389c36f85647&displa...
    Any Ideas?
    Thanks,
    Peednus
    T61
    T7100 @ 1.8 GHz Duo
    2GB RAM
    Windows 7 Home Premium (x64) (Clean Install)
    T420s, i5-2520M @2.5, nVidia 4200m, 8GB DDR3, OCZ Vertex 3 Max IOPS 240GB SSD, Hitachi 320GB @7200rpm ulrabay, 8Pro x64
    T61, Centrino Duo @1.8, GM965, 4GB PC2-5300 DDR2 @667MHz, OCZ Agility 120GB SSD, 7Pro x64

    Hi peednus,
    The C++ 2005 SP1 installer you are trying to use is for x86 (32 bit).  The error message you quote says it needs the x64 (64 bit) version.  Try
    Microsoft Visual C++ 2005 SP1 Redistributable Package (x64)
    If you're really running a 64 bit Windows install, that should/might get you going.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • TS3694 hi just tried to update my iphone 4s with latest version of itunes and has stalled on reset with an error code of 36. have tried re installing i tunes and switched off security and new lead an windows update but still seems to recognize phone.

    Hi
    just tried to update my iphone 4s and it has failed to restore settings. comes up with error code 36.have tried all suggestions in help but to no avail. any help would be appreciated
    john

    if you have tried ALL suggestions then your phone is obviously broken beyond reparing by user
    but if you might not have then you can try reading these
    https://discussions.apple.com/message/21571280#21571280
    http://www.techisky.com/how-to/easy-fix-iphone-in-recovery-mode-upgrading-to-ios -6-2.html
    more
    restore iphone error 36

  • Error when trying to install MS Exchange 2010 Management Tools Windows 7 x64 SP1

    When I try to install Exchange 2010 Management Tools on my Windows 7 Pro x64. I get the message ExSetupUI.exe has stopped working? Has anybody else gotten this message?  It doesn't even load into the install screen. It is stopping before then.

    Hi
    Have you installed the admin tools for windows 7 and all the prerequisites? Try running the setup from an elevated prompt or "as Administrator"
    for ref:
    http://social.technet.microsoft.com/Forums/en-US/63880f4e-6b6e-4ea9-b3b6-8a535657288f/installing-exchange-management-tools-on-a-win-7-x64-box-getting-error-on-readiness-checks?forum=exchange2010

Maybe you are looking for

  • Strange Problem here. Any help appreciated.

    OK. I bought a new Red Shuffle today. Plugged it into my front USB port on the front of the Tower, and almost 3 minutes later, everything freezes up. No mouse movement on screen. Nada. I did a hard restart, but as the machine came up again, the same

  • Sales Invoice output

    Hi Friends, My client requirement is that they sales invoice to be sent by 1. Print output 2.In PDF form 3.By Email copy to be sent when we save Invoice. Thay want all three output types to be triggered in the vf01.My query is whether I need to creat

  • In java code, how to obtain the input a user types in JTextArea

    In my java code, I have two JTextArea. When a user starts the GUI, there are two testareas showing up (by typing: java xxx). The user types in words and sentences in the first testarea, and how can I code the java program so that something can come o

  • -2147024882 Ran out of memory when trying to use automation open

    Hello, I am currently trying to use labview to insert variables into a label template for a brady label printer. When I run the VI, the load screen appears for labelview 9, then an error is thrown by the automation open command, saying that the sys

  • Stale Instances in BPEL 10g

    BPEL process instances are becoming stale by themselves (instances of latest version). Also at times processes get fired by themselves immediately after deployment with null payload. Please suggest,if someone has faced this issue.