Installing seeburger adapter
Hallo,
have anybody experiences with installing and running the seeburger adapter? The installing have bad impacts of the whole system? What are the problems?
Thanks for in advance,
Frank
Hi Frank,
Just see if these links help you in anyways:
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
Regards,
abhy
Similar Messages
-
Diff between Seeburger Adapter and File Adapter
Hi All,
My company needs to interact with some banks and the banks are particular that they want SFTP, which is not supported by File Adapter, so we have decided to go with Seeburger adapter.
Now what are the differences between File adapter and seeburger adapter?
I believe that Seeburger adapter does not support File Content Conversion, Archiving etc.
Could you all pls put some light on the diff between file adapter and seeburger adapter when it comes to dealing with files?
XierHi
You are aware with working of File Adapter.
The most direct way of using the Seeburger adaptors is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to
1. Define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. Using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. Create a one to one mapping between input en output.
4. Export the metadata in xsd or sda format for import in XI
5. Generate an SDA which can be deployed in XI and used as a module.
Have a look here,
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Some Seeburger related information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e2aeb02c-0601-0010-d680-c9be61ffa390
Go through this threads:
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Need Material on Seeburger Adapters.
Seeburger Adapter
Installing seeburger adapter
http://www.seeburger.com/xi-adapters/
Thanks -
SEEBURGER Adapter Installation
Hi,
We are installing SEEBURGER Adapter for this below 3 files required.
I searched in sap market place and other forms i am not able to find these files.
SeeXIBaseTools.sca
SeeXIExtendedTools.sca
SeeXISolutionIdModule.ear
Please help the down load path for file.
Thanks&Regards
Praveen PinapatiIf I am not mistaken you have to buy Seeburger adapters either from SAP or Seeburger. If you have bought it should show up on SAP Marketplace under "My Company's Application Components" in SAP Software Download Center. Otherwise talk to the account manager with whom the company worked for licensing terms.
Hope this helps.
Thanks,
Naveed -
Hi ALL,
I have been posting quiet a few questions on SDN regarding SEEBURGER Adapter, But I don't seem to be getting much help in SDN. I understand there is not much information avaiable on net about SEEBURGER Adapter. Is anyone aware of any forum dedicated for SEEBURGER Adapter?
Regards,
XIerHi Xler
<b>pls go through these links for more information on SEEBURGER Adapter</b>
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Need Material on Seeburger Adapters.
Seeburger Adapter
Installing seeburger adapter
http://www.seeburger.com/xi-adapters/
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Please see this threads for some more information on this:
Seeburger AS2 Adapter
Seeburger
have a look also on these URl's
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
Thanks
Pls reward if useful -
We are evaluating XI for ANSI X12 EDI , Have some EDI Quesitions using SEEBurger Adapter.
1) Does SEEBurger Adpater has ANSI X12 Enveloping and De-Enveloping capabilities ??? If Yes,how this is configured /Developed.
2) Does SEEBurger Adapter has capability of generating sequential ISA control numbers by Trading Partner ??? If Yes,how this is configured /Developed.
3) Can It perform EDI Structure validation based on the EDI standard rules (For eg: Looping structures, Element qualifier restriction list .....)Hi,
Seeburger is a tool which will conver any type of standard EDI format into XML.
All standard EDi mappings are predefined in seburger,we have to install in XI Server and use that standard mappings.
Check this links
SEEBURGER
http://www.seeburger.com
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Phani
Reward Points if Helpful -
Error in Oubound message using Seeburger Adapter
Hi,
I'm getting this error on the Adapter engine when trying to generate an outbound EDI message with Seeburger adapter:
2007-01-24 13:33:29 Error Unable to forward message to JCA adapter. Reason:
Fatal exception: com.seeburger.xi.connector.queue.QueueEntryRejectedException:
Entry rejected due to error in resource management: null, Entry rejected due to
error in resource management: null
2007-01-24 13:33:29 Error MP: exception caught with cause
javax.resource.ResourceException: Fatal exception:
com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
to error in resource management: null, Entry rejected due to error in resource
management: null
2007-01-24 13:33:29 Error Exception caught by adapter framework: Fatal
exception: com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry
rejected due to error in resource management: null, Entry rejected due to error
in resource management: null
2007-01-24 13:33:29 Error Delivery of the message to the application using
connection File_http://sap.com/xi/XI/System failed, due to:
com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception:
com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
to error in resource management: null, Entry rejected due to error in resource
management: null: javax.resource.ResourceException: Fatal exception:
com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
to error in resource management: null, Entry rejected due to error in resource
management: null.
Any ideas?
Rgds,
YvesYves,
I think there is some problem in invoking the seeburger adapter. Have you installed the adapter? Also after installing you have to import the metadata. Check this document for further help:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
---Satish -
Hi all,
I have installed a generic seeburger FTP adapter, but I dont have any VAN connectivity at present. Can I convert the EDI ANSI X12 format to xml with this installation or it requires VAN connectivity to do this.
In this case do we require the BIC mapper? if so how to work with BIC mapper?
In the communication channel, I am able to see the installed Seeburger FTP adapter but it does not show the transport and message protocol. Is this related to the Installation/setup of VAN connection.
Regards,
NithiyanandamHello..
SeeBurger is a leading provider of global business integration solutions.
Market launch of the most successful EDI solution for the automotive industry in 1986.
the company today serves more than 7,000 customers in 42 countries and more than 15 industries through its flagship B2B Gateway and related products and services.
First company worldwide to receive certification for SAP R/3
Building a closer partnership with SAP.
Extended any-to-any-conversion.
The SEEBURGER Business Integration Converter (BIC) is an Any-To-Any Format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex,high performance XML-to-XML mappings or to interface to existing JDBC Data Sources.
Supported EDI formats include: ANSI, EDIFACT, INHOUSE, IDOC, XML Schema, XML DTD, CSV,Delimited Data, positional data, SWIFT, EANCOM and many more.
Mapping Designer, a graphical tool, easily defines data format conversions via drag and drop functionality, enabling easy integration between source and destination files. A central mapping reposiu00ADtory enables comprehensive support of versioning and deployment support, such as self-testing and auditing.
The SAP Exchange Infrastructure message format is based on XML, but it also can work with non-XML data using attachments. In some cases it may be necessary to convert the main XML document in a message, into a non-XML document. The use of BIC is very common in Business-to-Business scenarios where EDI standards are in use.
The Business Integration Converter (BIC) of Seeburger is based on Java JIT Technology and can be used for small real-time messages, as well as very large master data (i.e.Catalogs) batches.
BIC can convert outbound invoices from XML format (used in SAP XI) to an EDIFACT invoice. The conversion can be executed before the message is transmitted to the business partner. The other way around, once an EDIFACT message has been received from the business partner, it must first be converted to XML format, which is the format SAP XI supports.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. BIC will allow you to do the following
Once you install BIC, you need to do Import the Generator Mappings into the Project Explorer of BIC MappingDesigner.
You can find Generator Mappings as a ZIP file in the following location <BICMappingDesignerInstallationDirectory>\user\bicmd\Exchange and select the file prj_GeneratorMappings.zip.bicmd.
In MappingDesigner select File Import Generator Mappings Zip File prj_GeneratorMappings.zip.bicmd Clik on Add and OK.
Once Import is done you can see Generator Mappings in BIC Mapping Designer.
The SEEBURGER Adapter runs on the SAP WEB AS (J2EE Engine)
The SEEBURGER Adapter is integrated into the SAP Exchange Infrastructure over JCA (Java Connector Architecture)
Consequence :
Supply of the complete SEEBURGER EDI/B-to-B-Technology-Suite within SAP NetWeaver
Central File of Business Content (mappings, integration processes) in the Integration Repository of SAP XI
Central configuration and design by using the Tools of XI in the configuration
Central monitoring and alerting over SAP XI
Seeburger Solutions Overview
BIC Mapping Module
Functional Acknowledgement Solution
Operational Dashboard / Archiving
Invoice Solutions
Communication
The Business Integration Converter (BIC) from SEEBURGER is a converter for the implementation of data formats.
Following formats are available:
ANSI X.12 (American National Standards Institute)
CSV (Comma Separated Variable formats)
EDIFACT (all subsets)
INHOUSE (VDA, flatfiles, e. g. SAP IDoc)
SWIFT (banks)
TRADACOM (Trading Data Communications Standard)
XML (DTDs and SCHEMATA)
Able to classify messages into the following message types:
XML
EDIFACT
Ansi X 12
Tradacom
VDA
IDOC
Swift
Inhouse
XML Ansi X 12
XML EDIFACT
XML Tradacom
XML VDA
XML IDOC
Go through this links..
Some more..
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Reward Points if it is really useful to you.....
Thanks,
Satya Kumar.. -
Configuration details about Seeburger adapter
Hi,
How to configure the Seeburger Adapter on the outbound and inbound side to intigrate with XI?
Thanks
Koteswara RaoRao,
You have to install the seeburger adapter and import the metadata into IR and use it. You check the document for some help:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
SEEBURGER
---Satish -
Hey guys
i urgently need help in Seeburger adapter,actually i have a scenario where in i m getting EDI directly from VAN or from seeburger adapter over XI,and i have to post this information to R/3 server,can anyone provide me with some links about how to start off with this scenario.
do i need to do any configuration over XI?how will i use the seeburger adapters ,any information will be really appreciated
thanx
ahmadHI,
There are seeurger adapters, we can use , but we can use also with the file with seeburger modules also. Its all depends upon the what type of seeburger adapter was installed on your server and what are all the modules installed.
Any way see the below links on seeburger..
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Please let me know if you have any queries..
Regards
Chilla..
<i>Points rewarded if it is usefull..</i> -
SEEBURGER adapter - How much does it help?
We have a PI box just installed and we'll be implementing a few EDI transactions with some business partners.
I was told that SEEBURGER is the preferred EDI adapter for EDI transmissions from PI (XI).
1 - How much does SEEBURGER help the development of PI EDI interfaces? Is there a way to estimate on how much work is saved using it instead of relying on standard? (lets say 10, 20 or 30%)?
2 - I am considering here 2 options (Use SEEBURGER or not). Is there a better alternative?
Thanks
LeonardoHi,
For EDI implementation there are ways by which u can implement with XI
1) Using third party seeburger adapter.
2) Conversion agent
3) Writing module.
Preferred one is seeburger.
1) It has std XSD available which we just need to import into External definition
2) It has std mappings for all the message type which converts EDI to XML and XML to EDI format.
3) Provides different adaters
4) BIC tool
5) Many adapter modules.
Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
It provides std mapping program which does the conversion of EDI to XML and XML to EDI which need to used in XI comm channel module tab.
Thnx
Chirag -
SeeBurger Adapter PostInstallation
Hi guys,
I'm back with another cool doubt...
We're using SeeBurger AS2 Adapter and we've followed every installation step described in the corresponding manuals.
I'd like to try a short example, sending a test message to a partner just to check if the installation is working properly. However, I've bumped at the point when I was creating the sender communication channel. When trying to select the AS2 Adapter, there's no signal of it. I can only get all the SAP BASIS Adapters (RFC, Idoc, etc...) list displayed, no signal of AS2.
So I thought, let me check if the corresponding SWCV is correctly installed.
After digging up on SLD I've found the corresponding:
Installed Software Component AS2Adapter and
Installed Support Package: AS2Adapter
However, there was something that caught my eye. They both have version '0'. That seemed a bit odd, since evey component has the corresponding version after the installation. Can any of you guys who worked with the Seeburger Adapter check if this setting is alright? Can you guys check your SLD SWCV?
If you think there's something missing and the SLD setting has nothing to do with it, please give me an idea....
Thanks a lot in advance.
Another Question:
The imported .tpz in the IntegrationRepository 'SEEBURGER_EDI_ADAPTER' responsible for the corresponding AS2 Adapter which I'm trying to use in the IntegrationDirectory corresponds to a Software Component Version with a key from the SLD where we can check the associated GUID.
Well, I was expecting to see this SWCV in the SLD, but nothing...I've searched all the generated GUIDS in the SLD from ContentMaintenance and there's not there...
Am I missing any activation?
Edited by: Gonçalo Mouro Vaz on Apr 17, 2008 12:44 PMHi........
As far as the version is concerned it has nothing to do with the functioning of that particular SWC in SLD.....its not a mandatory requirement........u can simply import the SWCV in the
Integration Repository->Tools->Transfer from System Landscape Director->Import Software Component Versions... and carry on with your work...
No activation as such is needed.....
compliment with points if helpful.........
Thank you. -
Seeburger adapter configuration
At my client place they want to send an orders idoc as an EDI document to customer,,Can any one please tell me how to configure seeburger adapter & the mapping for edi.
Advanced Thanks
KumHi sati,
First you need to instal Seeburger BIC and then you should generate the XSD structure of the all yor documents.In Sebbburger BIC mapping designer is generate thes type of all the mappings1)E2X----EDI to XML and X2E ---XML to EDI etc.Seeburger BIC mapping desigener can take care all the tranformatiom of EDI to XML and XML to EDI.once instalitation is finshed, then you can chek with BIC mapping desginer .
Seeburger adapter is the B2B EDI Adapter.Seeburger adapter is also many types adapters:
<b>1)BIC Adapter
2)Split997 adapter
3)AS2 adapter.</b>Based on your usage you have to configure thes adapter.for example
<b>AS2 sender adapte configuration</b>:
1)AS2
2)Asynchor MDN Setting:
a)SSL Certificates and Clint certifactes.
b)SSL host name:HTTP Timeout,MDN Retry interval and MDN Retry count
c)use proxy
AS2 Receiver adapter:
a)HTTP:server ,port ,url and http time out
b)proxy:
c)AS2:Compress,Sign.Encrypt,Sign MDN use proxy and Xi Message
<b>Seeburger Adapter have more funcations:</b>it is very good to Moniter Message.
1)Archiving
2)Message monitor
3)message Spliter
4)Mapping Variable
5)Resource manger
If you nedd any more information regarding the Seeburger ,send your maild then i will send the some more docs to you.
Regards,
Ramesh -
Hi All,
I need information about iWay Seeburger adatpeter.how to do mapping .pls send any sample weblogs or scenarios regarding Seeburger adapter.please send to me any documents of seeburger adapter.My mail Id is [email protected]
Thanks & Regards..
RameshHi,
><i>I need information about iWay Seeburger adatpeter.</i>
SeeBurger and Iway are 2 separate vendors providing Adapters to Integrate XI with various applications!
SeeBurger Provides adapters for EDI and Iway provides adapters for PeopleSoft etc
SeeBurger~~
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a --> Good theorotical info!
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33 --> Gives an overview of Installing the EDI adapters in the 3rd section and also leads you to the entire Installation guide!!
Iway~~
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
/people/vedavyas.cuntheepuram/blog/2005/04/02/publish-messages-in-tib-from-xi
Regards
Bhavesh -
Surface Pro 3 / "Windows did not detect a properly installed network adapter"
Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
EthanHi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Bsi mapping in seeburger adapter
hi experts,
i want to know about bic mapping in idoc to edi scenarios in which i am using seeburger adapter.please help me and provide me some documentation.Hi,
BIC is mapping tool which converts EDIFACT to EDI_XML.
You will be accepting EDI flat file i.e. csv file and using BIC you will map it 1:1 mapping ....this flat file will be converted into EDI_XML after mapping.
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Regards,
Akshay Jamgaonkar.
Don't forget to reward points.
Message was edited by:
Akshay Jamgaonkar
Maybe you are looking for
-
Can you give me a new one for free?
-
Why doesn't the TextArea show up in this?
/* Something.java */ /* I want this to be a simple text editor to start with */ import java.awt.*; // Abstract Windows Toolkit import java.awt.Graphics; import javax.comm.*; // Comminication between ports import javax.
-
New laptop. Do I have to uninstall LR3.6, CS5, & El 8?
I bought a new laptop. Windows 7, 64 bit. I spend 99% of my time in Lightroom, and I would like to upgrade to LR4. I also have a 14" laptop with XPPro+, SP3, Core 2 Duo [email protected] From what I've read, LR4 probably will not run on this mach
-
Reg: IDOC to file for PEXR2002
Hi folks, Here my scnario is once fund transfer happend idoc are generated. I have to pick the generated idocs and transfer to a file. I have done the configuration and design. But after the idoc is generated it is not transfered to XI system how can
-
Hi, Im using a db execute tag to call a pl/sql procedure. This procedure returns an out parameter. My db execute call is as follows <database:dbExecute connId="db" output="none" bindParams="return_value"> call ccr_contacts.save_organisation(<%=organi