Installing Several Systems on One host

Hello
is it possible to install several Systems (both central instance and database instance +j2ee engine run on the same host) on ONE host?
If i want to install the ECC i must install the sap solution manager.
Is it possible to install this system on the same host on which i want to install the ECC?
I guess i will then have an MCOD System, which means that the solution manager and the ECC will reside in the same database or am i wrong?
Message was edited by: Gideon Lenz

Hi,
We installed Database and CI on server A and server B for ECC.Installing again Database instance with seperate oracle software and CI for BW on seever A
for database and server B for CI.I am having problem
when using oracle client software. I did not choose to extract oracle client software for BW -CI in my first attempt since it will over write existing oracle client software in CI for ECC. if choose to extract when installing CI for BW CI for ECC breaks - which i did when installing CI again for BW. Since during my first install CI for BW could not talk to DB for BW.
pLEASE HELP.Please provide your email address.
sARAVANAN

Similar Messages

  • Installing two systems in one host - clarification

    Hi Experts,
    We have requirement to install the R3 and BI development system in the same host.
    I have completed installation of the BI7 system.
    The database used is SQL server 2005.
    Now when we install the other system, I am not sure how to go about the database.
    Do I need to install again SQL server 2005 in some other drive or the existing one can be used, that means will it add a new database to the existing database server?
    Thanks and Regards,
    Amit Jana.

    Hi,
    While installing ECC6 on MSSQL 2005 the instance is not starting up.
    In SAPMMC console the dispather is stopping as all the wp s are dying.
    I am giving the error log from dev_w0.
    Kindly suggest.
    OpenOledbConnection: MARS property was set successfully.
    C  OpenOledbConnection: line 23715. hr: 0x8000ffff Login failed for user 'SAPQUA\SAPServiceMEQ'.
    C  sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 18456, sev 0), Login failed for user 'SAPQUA\SAPServiceMEQ'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> Login failed for user 'SAPQUA\SAPServiceMEQ'. [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error -1     performing CON [dblink#5 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Login failed for user 'SAPQUA\SAPServiceMEQ'. [dblink#5 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10468]
    Thanks and Regards,
    Amit Jana.

  • Two solamn sap systems in One host ????

    Experts,
    Is it possible to install two solman 7.0 sap systems in single host. 
    Aleady i have installed solman 7.0/Ms sql 2005 in the Windows Host.  I want to install another solman 7.0 in different SID in same the host for testing purpose.
    (I installed ECC and CRM servers in the same host its works fine.)
    PLease give your suggesstion
    Thanks
    Thirumal

    Hi thirumal,
    we can install two solman in one system through a concept called MCOD ie multiple components in one Database.
    just as we can different SID's in one database.
    for more information refer this site:
    http://www.doag.org/pub/docs/sig/sap/2002/04/GeorgLeffers_SAP.ppt#550,29
    Regards
    Manjula.
    u manjula on Aug 22, 2008 3:12 PM

  • Two SAP system in one host and one oracle software

    Hi SAP Gurus,
    We want to install Two SAP system (PR1 & PP1) in one host(Prdb05) and one database (Oracle). I dont want to do MCOD.
    I am very confuse about what changes i need to make before start the install of PP1. Actually i do not required to install oracle software again. am i correct ?
    also i do not required to install oracle client again.am i correct ?
    Will it take software automatically ?
    In SAP note 350251 they asked me to run ./runinstaller !!! but when we
    are not installing software again why we need to to execute that.
    Will you please guide us for the same.

    Hi , This is what you have to do .
    Couple of questions before i answer anything
    1) Is your first SAP system installed ?
    2) is this High Available system
    What Oliver suggested is a valid option on Windows , but not on Unix .
    In Unix you might face problems for user,groups because the user for ORACLE_HOME should ideally be ora<SID>, and if you have 2 SID and one ORACLE_HOME , which user will you give ?
    So , it is better that you have 2 seperate oracle software installed , 2 seperate ORACLE_HOME , 2 seperate filesystems for oracle software .
    Hope you understood , what i am trying to say .
    Thanks
    Prasannna

  • Multiple XI systems on one host - problems

    Hi,
    We have a problem when installing a second XI system on the same host.
    Symptoms are that the J2EE engine of the first running installation does not work anymore, all java related items either hang or do not start.
    The abap stack runs as normal. We do get a lot of shortdumps that say that the programs in the RFC connections are not registered. We do not know whether this is cause or result of the problem.
    Our Visual administrator does not start anymore as well.
    We shut down the newly installed system of course but this does not seem to help.
    Anyone have a clue?

    Hi Chris,
    Im particulary interested in the behaviour of SLD in this kind of infrastructure.
    Does your XI environment uses only one or multiple SLD instances?
    Do you have access to all your defined business and tech. systems/objects across the XI environment in SLD?
    Thanks,
    Rob.

  • MDM 7.1 SP7, Install Several Instances in one database?

    Hello,
    we are investigating to install MDM 7.1 Sp7 with several instances to separate impact in different repositories, but with one database (oracle). Has someone done this kind of installations? Has it improved stability?
    Regards,
    Alexander Türk

    Hello,
    This clearly says, it adds a new, but nothing of multiple instances.
    For an MDM environment to work, we require three Servers, Master Data Server(MDS), Import Server(MDIS), Syndication Server(MDIS).
    MDIS and MDSS run in conjunction with MDS.
    This refers to the multiple instances, but in all it will an single installation across environment.
    You will have the basic Development, Quality and production, each will have a different installation.
    an extract from help.sap.com site
    Support for Installing and Running Multiple MDM Server Components on a Single Machine
    Starting from MDM 7.1 SP06, you can install and run multiple MDM server components on one physical machine.
    One advantage of installing multiple MDM server components on a single machine, as opposed to loading multiple MDM repositories on a single Master Data Server (MDS), is that parallel execution of imports/syndications to/from loaded MDM repositories is possible. Another advantage is that you can have two repositories for separate projects on two different MDM versions on the same machineu2014resulting in reduced TCO. (In previous releases you would be required to separate the repositories on two different MDM servers, and adhere to the recommendation that the Master Data Import Server (MDIS) and Master Data Syndicator Server (MDSS) be run on a separate machine from the Master Data Server (MDS)).
    Each Master Data Import Server (MDIS) and Master Data Syndicator Server (MDSS) must be configured to work with one particular MDS only.
    You can distribute the MDM server components according to the following hardware configuration options:
    ●      Multiple Master Data Servers on one machine with remote MDM Import/Syndication Servers on a second machine, and a DBMS on a third machine.
    ●      Multiple Master Data Servers and MDM Import/Syndication Servers on one machine with a remote DBMS on a separate machine.
    ●      Multiple Master Data Servers, MDM Import/Syndication Servers, and a DBMS all on one machine.
    Test results show that hardware sizing parameters are almost identical for all the aforementioned configuration options; therefore the configuring option you choose should be based solely on your preferred hardware setup.
    More information:
    ●      http://service.sap.com/installmdm71 ® MDM 7.1 Installation Guides for Windows and UNIX (see updated section: Maintaining Multiple MDM Servers on a Host)
    ●      http://service.sap.com/installmdm71 ® MDM 7.1 Sizing Guide (see new section: Configuration Options for MDM Server Components)
    Regards,
    Abhishek
    Edited by: Abhishek Biwal on Feb 21, 2012 3:30 PM
    Edited by: Abhishek Biwal on Feb 21, 2012 4:56 PM

  • Two R3 Systems on one Windows NT Server

    Dear SDN Colleagues,
    I'm starting an installation project (DEMO systems) of the Solman 4.0 and SAP ERP 2005 (ECC 6.0). I'm planning to install both systems on one Windows NT Server. About ABAP stack I know that it is possible, as such as describe in the SAP Note 28392 "Two R/3 Systems on one Windows NT Server", but we’d like to know about JAVA Stack.
    Is there any available SAP documentation about
    installing several systems in one host?
    Thanks in advanced and Best Regards,
    Chacon

    Hi,
    you can install both Solman and ECC 6.0 on single NT host.
    it is better to go for 64 bit windows installation. if you have 64 bit windows OS.
    installation of java stack  depands on your requirement.
    download installation document from service.sap.com/instguides.
    Guidelines:  ( for example only)
    1) first install SOLMAN 4.0 ABAP + JAVA stack on windows.
    SID: SSM
    instance number : 00
    after sucessfull installation of solman perform post installation on that. and stop the SAP instance.
    2) Now install ECC 6.0 ABAP instance , If you want to plan to use ESS/MSS like java based service than JAVA stack is required.
    Either you can perform ABAP + JAVA stack or perform only ABAP installation and JAVA stack as separate instance.
    SID: ECC
    instance number : 10
    if you going for JAVA stack as separate instance.
    SID: J2E
    instance number : 20
    so as result you have total 3 System, for this more than 4GB RAM is required. ( for better perfomance)
    regards,
    kaushal

  • More than one Database Server on one host

    Hallo,
    We want to implement two systems on one host with MaxDb as database. I know it is possible to run 2 DB-Instances on one host, is it possible to upgrade or patch one instance without inflicting the other one with this changes?
    For example:
    I have the development and test system on one host with two database instances running. is it possible to only upgrade the Database Instance of the Development System without upgrading the test instance.
    I know it is possible in Oracle but is this also possible for MaxDB?
    I hope you can give me an answer.
    best regards,
    Patrick Volny

    Hello Patrick,
    1) "If I understand you correctly, I am able to patch each Instance separately but because the instances share the same kernel to upgrade an Database I have to upgrade all instances?"
        Answer: You can update the database instance separately.
                       As the independent database software is shared between database instances, located in /sapdb/programs by default installation and it's downward compatible
                      ==>
                      you could upgrade only one database instance & run the another database instance with the higher version of the independent database software.
       Warning: Please follow the recommended structure of the database software installation & install the dependent on the version of the database system software once for each database instance.
                      By default it's installed in /sapdb/<SID>/db
        Example : On the local server ::
    dbmcli db_enum
    OK
    SC1#C:\sapdb\sc1\db                        #7.6.04.11#fast#running
    SC1#C:\sapdb\sc1\db                        #7.6.04.11#slow#offline
    LVC750#c:\sapdb\lvc750\db                     #7.6.00.21#fast#offline
    LVC750#c:\sapdb\lvc750\db                     #7.6.00.21#slow#offline
    xinstinfo SC1
    IndepData           : C:\sapdb\data
    IndepPrograms       : C:\sapdb\programs
    InstallationPath    : C:\sapdb\sc1\db
    Kernelversion       : KERNEL    7.6.04   BUILD 011-123-181-372
    Rundirectory        : c:\sapdb\data\wrk\SC1
    xinstinfo LVC750
    IndepData           : C:\sapdb\data
    IndepPrograms       : C:\sapdb\programs
    InstallationPath    : c:\sapdb\lvc750\db
    Kernelversion       : KERNEL    7.6.00   BUILD 021-123-117-795
    Rundirectory        : c:\sapdb\data\wrk\LVC750
    In my case, I have installed two database instances of the versions 7.6.00   BUILD 021 and 7.6.04   BUILD 011 on one server,
    Independent database software is installed in C:\sapdb\programs and each database instance has own InstallationPath.
    And you could run also 'sdbregview -l' to get the short list of all installed database packages, pay attention to the "Database Kernel" package
    for the dependent database software installation path/version.
    2) "I also read that to patch an instance you have to stop an x server service. But this service is necessary for the communication between applications and the database. so if i patch an instance the second one can't work properly?"
    The X Server is needed for the client to establish the connection to a database instance located on a remote computer. As you know the X Server is the communication server for the database system. The X Server listens out for connection requests from clients such as database applications and database tools.
      As I already wrote you, that the independent database software is downward compatible & you should not have the problems with the communication to the Test database on the TEST system.
      I case you would like to know more details about the database version software, if there are any known problems, please update with additional information::
          What are the current versions of the DEV and Test databases?
          Did you install the application servers on the database server or not?
          To what version of the database are you going to update the DEV database instance?
           What is the version/SP of the SAP basis on the TEST system?
            What is the version/patch of the SAP kernel on the TEST system?
    3) The installation distinguishes between different software directories, as you already know. 
    For example, the following directories:                                                              
           - <independent_program_path>                          
              SAP Standard:/sapdb/programs    
              Run the command 'dbmcli -s dbm_getpath IndepProgPath' or 'xinstinfo' to get the current value on your system.   
              !!!! This directory contains instance- or version-independent software that works downwardly-compatible.                          
           -  <independent_data_path>                                                                
              SAP Standard:/sapdb/data   
               Run the command 'dbmcli -s dbm_getpath IndepDataPath' or 'xinstinfo' to get the current value on your system.                                                           
           -  <independent_data_path>/config                                                         
              SAP Standard:/sapdb/data/config        
           -  <InstallationPath>                                                                               
    SAP standard: /sapdb/<SID>/db          
           -  <run_directory>                                                                               
    SAP standard: /sapdb/data/wrk/SID                                     
    If you are SAP customer,
    please see the SAP notes::
                 1020175     FAQ: MaxDB installation, upgrade or applying a patch
                 820824     FAQ: MaxDB / SAP liveCache technology
                 767598          Available documentation
    && SAP documentation link:
    http://help.sap.com/saphelp_nw04/helpdata/en/23/d1a03cc24efd1de10000000a114084/frameset.htm                                                                           
    Thank you and best regards, Natalia Khlopina

  • How to setup multiple content servers on one host

    Hi,
    We have setup 2 ECC 6.0 systems on one host ECC DEV and ECC QAS. Windows 2003 Server 64bit
    We want to setup 2 standalone Content Servers (MaxDB). One contentserver pointing to ECC DEV and one to ECC QAS. Containing its own content.
    Problem is that I was not able to set up 2 content servers on one host because in ISS i could only create one default webservice during installation.
    To my opinion it must be possible to setup 2 standalone content servers on one host, question is how?
    Can anyone help me how to proceed?
    Many Thanks!
    Best regards,
    Jacco Raymakers.

    Hi Jacco
    You cannot Configure Two Content Servers on IIS( One Sigle Hardware).
    As this Content Server you have configured can be used by both  ECC DEV and ECC QAS.
    There is no need of two content servers.Same Contentent server can be used by ECC DEV and ECC QAS.
    Configure Content Repository and Content category diferrent for ECC DEV and ECC QAS.
    I hope I have answered your query.Please let me know if helpfull.
    With Regards
    Mangesh Pande

  • Two systems on one databses

    Hi,
    we are currently running our QA and DEV systems one one host and one sql server 2000.the systems version is 4.6c.we are going to upgrade our systems to ecc6.I would like to know if this configuration (two systems on one host and one DB - <u>not mcod!!!!</u>) is supported on ecc6 and on sql server 2005.in notes 28392,171929 it is mentioned only regarding windows 2000 and sql server and sql server 2000.
    Regards,
    Moshe

    Ah - Ok - I got it:)
    This configuration is supported since SQL Server 7.0 and I don't find any note or information telling, that it's no more support on 2005, so I would say YES, it is supported.
    However, to get a definite answer I'd open an OSS call under BC-DB-MSS and ask the guys from SAP.
    Markus

  • Is it possible to install two SAP system with same SID but different instance numbers on one host?

    Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
    If yes, then how?
    If no, then why?
    Thanks in advance.
    Regards,
    Sarim

    Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
    Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
    If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
    The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
    The next issue will be with the SAP file systems like /sapmnt/SID
    The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
    These are few of the many problems I can think of.
    So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
    Regards
    RB

  • After installing several updates, the system is unstable

    Hello,
    I tried to install my mac mini server several times, all works fine, but after installing the updates from Apple update service, the VPN, Workgroup manager makes problems.
    In the last case I installed the last great update for the snow leopard server and the last update was the Safari update. After the Safari update the connection is very slow and I get no VPN connection. Also when I start the workgroup manager for example I need 5 minutes to connect to the server.
    thx

    Thx for the fast answer....
    (Ok tried it once again to install the system with all updates and with the last update (Aiport update for mac mini) the same problem occurs.)
    changeip -checkhostname
    Primary address = 192.168.1.194
    Current HostName = xxxx.local
    DNS HostName = xxxx.local
    The names match. There is nothing to change.
    dirserv:success = "success"
    thx

  • My macbook air was installed double system ,one is mac ox 10.6.7 another is windows7. the movie and the sound can't play together in mac system,however, it is normal when I play the same movie in windows7 system

    my macbook air was installed double system ,one is mac ox 10.6.7 another is windows7. the vidoe and the sound can't play together in mac system.I have tried many vidoe play tools including mplayerx and lvc etc.however, it is normal when I play the same movie in windows7 system. who can help me！

    Look at item properties for the .mov and .dv files. What exactly does it say they are? What drive are they playing back from? Make sure the contents of the viewer are set to fit to window in the View popup at the top of the viewer.

  • If I have installed an operating system in one language and I want to change to another language how to do?

    If I have installed an operating system in one language and I want to change to another language how to do?

    I mean I can change the system language without having to erase me things in my MAC?

  • Just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you  Operating System Windows 7 64bit

    just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you  Operating System Windows 7 64bit

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for