Installing SharePoint 2007 Integration Kit on BO XI R2 SP5

Hi there,
We are trying to install sharepoint 2007 integration kit but keep getting the error message:
"SP3 patch is required to install the sharepoint 2007 integration kit"
Our setup...
SharePoint 2007 running on its own Windows 2003 server
BusinessBojects Enterprise XI Release 2 Support Pack 5 running on its own Windows 2003 server
We installed the .Net SDK and Web Componet Adapter (WCA) of BusinessBojects Enterprise XI Release 2 Support Pack 5 on our SharePoint server
Now, both versions of .Net SDK and WCA are the same on BO and SharePoint as required
However after two attempts of installing the PIK we still get the message
"SP3 patch is required to install the sharepoint 2007 integration kit"
Does anyone know what is requried here?
Thanks,
Bernard.

Hi Amit,
Thanks for your response. I am not 100% sure of the answer to question 1 as we had someone external patrhing our servers and attempting to install the PIK. But I have detailed below the Crystal related products that were put onto the SharePoint server:
1)
Crystal Reports Server XI
Crystal Reports Server XI R2 Service Pack 2
Crystal Reports Server XI R2 Service Pack 5
Crystal Reports Server XI Release 2 .NET 2005 Server
I think he could have selected just the .NET SDK and WCA components from the main install and got to SP5 that way.
2) The PIK I believe is to be SP2 from looking at the setup.ini file
Msi=win32\cesp2k7.msi
ProductName=BusinessObjects XI SharePoint 2007 Portal Integration Kit
MsiMajorVersion=2
MsiMinorVersion=0
MsiBuildNumber=2600

Similar Messages

Does the BO Sharepoint 2007 Integration kit work with Sharepoint Serv 3.0?

Hello,
I have seen several posts about this topic but I still have not come to a correct conclusion. I have Windows Sharepoint Services 3.0 and BO Crystal Reports Server XI R2 SP3. The getting started documentation for SP3 specifically says the portal integration kit can be used with "MS Windows Sharepoint Services or Sharepoint Server 2007". However when I try to install the the integration kit I receive an error "Microsoft Sharepoint Server 2007 is required to install the Microsoft Sharepoint Integration Kit".
Is this true? Do I have something setup wrong or is the documentation incorrect and only Sharepoint server 2007 is supported?
It shows WSS as compatible in this document http://www.businessobjects.com/pdf/solutions/microsoft/bo_microsoft_interoperability_final.pdf
Any clarification would be helpful as I have wasted 1+ days trying to figure this out. I just need to know if Sharepoint services and the Sharepoint integration kit will work together with Crystal Server XI R2 SP3.
Thanks,
Ryan

Hello Ryan,
I recommend to post this query to the [Integration Kits - Other|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the other BusinessObjects Integration Kit.
This forum is dedicated to topics related to other BusinessObjects Integration Kits, including Siebel, Baan, PeopleSoft, and JD Edwards.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

MOSS 2007 Integration Kit download

Can someone point me to the location where the BOXi ( crystal reports) - MOSS 2007 integration kit can be downloaded? I have wandered around the support and download areas to no avail. Thanks in advance.
Joe

i dunn know if i got you correct or not
but if you mean the share point integration kit for the pervious releases you can find it here
https://www.sdn.sap.com/irj/boc/enterprise?rid=/webcontent/uuid/503988db-58c5-2b10-f79d-cb96700417f9 [original link is broken]
also you can search your service marketplace.
good luck

Will Sharepoint 2003 Integration Kit work with MOSS 2007?

Post Author: nicolespag
CA Forum: General
I'm currently viewing Business Object reports in my Sharepoint portal using the Integration Kit for Sharepoint 2003. However I've recently upgraded Sharepoint 2003 to MOSS 2007 and I'm wondering if the integration kit will work with the newer version of Sharepoint.
Thanks for your help!!!
Nicole

Post Author: tb262
CA Forum: General
The good news is that the new PIK compatible with SharePoint 2007 has been officially released as part of BOE R2 SP3. The bad news is that I have not figured out how to install it! SP3 installs from downloaded files automatically and does not extract installation files for the PIK. Previous installs of the PIK involved running the setup.exe for the PIK located in the Add-On's (or similar) folder of the BOE install files/media. No such luck with SP3. I have an open support case on this and will hopefully have more info soon.

Error in installing business in integration kit

I am getting following error while executing the setup file for BO integration kit 3.1
error you must have business object XI integration for sap solution install
I have installed,
step 1 BOBJ Edge BI 3.1
step 2 :BOBJ Edge BI 3.1 SP3 for Server Components
step 3 :BOBJ Edge BI 3.1 FP3.2 for Server Components
step 4 : sap gui installation
step 5: java connector installation
step6 : bo integration kit for sap (when i run the setup it gives the following error.
Is it because Of edge series ? Do i need ti install enterprise edition ?
Please help to resolve this issue.
Thanx

The installation should look like this:
0. Install SAP GUI
1. Install BO Edge 3.1
2. Install JCO.
3. Install int.Kit for SAP solutions 3.1 (found in the BO Edge installation package under the collaterals folder)
4. Install SP 3 for BO Edge Server components
5. INstall SP3 for BO Edge integration Kit
6. Install FP 3.2 for BO Edge Server components
7. Install FP 3.2 for BO Edge Integration Kit.
Make sure to choose the Advanced installation type when you install BO Edge and install Tomcat. Otherwise the integration Kit cannot be installed (requires a Java server).
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Oct 24, 2010 1:03 PM

SharePoint 2007 Integration

Hello all. Can any of you tell me if Novell Groupwise 7 can be integrated with SharePoint 2007? If so, do you have any related documentation. Thanks

* SABisram,
the MS "integrator" told us Sharepoint can use GW as an SMTP server, that's pretty much all. It can also use LDAP to integrate with eDir instead of AD. As you can imagine, MS didn't put too much effort in such 3rd party integration.
Uwe
Novell Support Connection Volunteer SysOp
Please don't send me support related e-mail unless I ask you to do so.

Install-error "BO Integration KIT -for SAP " STW00152

Hi,
In that installation "BO Integration KIT - for SAP" in the phase "CMS-connecting to CMS" I get a errormessage
"Connect to CMS is not possible. STW00152"
(Befor them, I installed "BO Enterprise XI 3.1 SP3" successfully)
I check the central configuration manager and I see BOE120Tomcat and Server Intelligence Agent was in the status "uncompletedly" and WWW Publishing Service was in status "it is explained". I started boht but I got a errormessage "The system cannot find the path specified"
I open the qualities for the "Server Intelligence Agent" and klick OK - I got a errormessage "the startparameter can't opposed. Error 87. The parameter is incorrect"
thanks .

Hi,
it looks like that even your BOE installation isnt working properly.
Try to reboot the Server and check if your BOE Server starts. After it starts successfull try to install the SAP ITK.
If it doesnt start, i would recommend you re- install BOE first.
Regards
-Seb.

OpenSSO 8.0 sharepoint 2007 integration problem

Hi,
when i typed the sharepoint url its redirecting to opensso and when login in opensso the http 401 internal server page error giving and in agent log file invalid session and http 401 internal server giving.
please kinldy give any one solution for me in successful of this integration.
thank u.
Ramesh

I got rid of the deployment error message by including the necessary jar in WEB-INF/lib (which was missing in the original sample).
I can now run the sample, but I don't think it is working correctly. The SOAP messages are exchanged, but without any SOAP security headers. In other words, both the wsc and the StockAgent OpenSSO profiles are set to generate SAML2-SenderVouches, but none is generated.
The only security provider that seems to get engaged is FAMHttpProvider (because I get a login prompt if I select "User Authentication Required" in the StockService agent profile referenced by FAMHttpProvider).
If I activate the SOAP providers XWS-Client and XWS-Server, the bodies get signed with X509 certificates, which is not what I specified in the OpenSSO profiles. The OpenSSO profiles seem to have no role in the SOAP security headers being generated.
Any suggestion of what might be missing?
Thank you,
Ugo

Unable to install the BusinessObjects XI Portal Integration Kits on shrepoi

Hi all,
I am attempting to install the following kit onto my sharepoint 2007 installation:
BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit
Download BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit - ZIP 5MB
My Sharepoint is fully up to date and is version 12.0.0.6335.
Each time i try to install, I get the message:SP3 Patch is required to install Sharepoint 2007 Integration Kit. I believe that this is already installed as whenever I try to install the SP3 Patch I get:
The expected version of the product is installed on your system.
I have checked and it looks to me that version 12.0.0.6335 is the most up to date and surpasses the SP3.
Can anyone assist?
Kind Regards,
G

Can you confirm the version of XIR2 from CMC application -> settings tab.
XI R2 SP3 version start with 11.5 not with 12, please check you have installed the correct version of BOE.
Thanks,
Shivanand

Cristal report server XI feature 2 integration kit to WOSS 2007

Hi All,
we would like user to be able to run report from our WOSS 2007 envirronement. To do so, we would like to integrate Cristal report server F2 to our WOSS 2007.
I would like to know where can we look to to see update or ServicePack that have been install on Cristal Report ? Also if there is documentation on what need to be install on Sharepoint to to achive this.
I have download the BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit but I always get a error message when I try to install it.
error: SP3 Patch is required to install Sharepoint 2007 integration kit
CHeers
Frederic

Apologies if I didn't get it correctly..
XIR2 SharePoint 2007 PIKs support was introduced from BOE XIR2 SP3 onwards, hence the message
Thanks
-Amit-

Error when installing the Integration Kit for SAP

Hello,
When installing the integration Kit I get the following error:
The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
What have I done wrong?
What is the solution? Reinstalling everything but doing what?
Thanks and regards,
Ana.

Hi Ingo,
Yes, it is BO Edge.
I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
What else can I do?
Thanks and regards,
Ana.

Core Dump when installing SAP Integration Kit Fix Pack 3.1

When installing the SAP Integration Kit Fix Pack 3.1 we are getting the following error message..
boperl.sh[88]: 9961568 Memory Fault (Core Dump)
This install is being done on AIX after the SP3 was installed.
Any ideas?
Thanks,
Deepti

DO you install the SP3 full version of the integration Kit?
Regards,
Stratos

Need to install XI integration kit

Hi,
I have downloaded the Business object Integration kit free trail version.
I have installed crytal report now what i need is to connect to BI7.0 through Business object Integration kit.
But i dont know how to proceed further or how to install the BO integration kit.
So kindly advice me on the same.
Regards
Vijay

Hi Vijay,
The intergartionkit for BO with BI 7.0.
should be installed to interact with the R/3 table thru BO.
Procedures and prerequistiies to follow:
1.First install the BI 7.
2. Install the BO XIR2 or XIR3. in the same machine or diff server.better install diff system.
3.while installin the BO install as server.
4.Then install the intergartion kit for SAP - BO need to be installed in the same machine or if BO installing as a diff server need to be install in that server.
5.Before creating the RFC connection with this BO system and SAP R/3 proper authorization for BIW system to be created in SAP system by BASIS administrator or follow the installion kit.
6.Then establish connection with the BO with SAP system now both system will get interact.
7. Then all the infocubes you could create in the BI system.
that infocubes you can access in the BO report creation area..
any doubts keep in touch..
Regards.
Paneer

Need to Install BO Integration KIT

Hi,
I have downloaded the Business object Integration kit free trail version.
I have installed crytal report now what i need is to connect to BI7.0 through Business object Integration kit.
But i dont know how to proceed further or how to install the BO integration kit.
So kindly advice me on the same.
Regards
Vijay

Hi , Simply run the set up and donn do anything esle.
One the setup is complete you can see SAP as a Item in Menu of Crystal reports.
Click on SAP and then click on the and say create new report from query , then a new window will pop up for your SAP Credential .enter them and enjoy.
If u face any MODULE kind of a error then its a task of a SAP ADMIN Guy to make some transport in SAP BI system , for that conatct your SAP ADMIN guy.
Also refer the PDF module from business objects website for more details.
Thanks
Ashwani
SAP Labs.

Authentication of live connected dashboards in sharepoint 2007?

Hi Guys,
Could anyone let me know how is the authentication of a live connected dashboard(Enterprise Authentication to Business Objects , data on dashboard is got via live office) handled when we upload a dashboard to Microsoft Sharepoint 2007. If you open the page with Dashboard, will it prompt user to enter his BO userid/password?
I installed the Portal Integration KIT that comes with Xcelsius 2008 setup files. I have added the web part assemblies to Global Assembly Cache using Xwp.dll and ICSharpCode.SharpZipLib.dll.
Will this ensure the authentication of dashboards in sharepoint page or is there any other configuration required?
Any inputs to this will be highly appreciated!
Thanks.

AB
Please share ULS log for more detail.
As for now you can check with user control appearing randomly in error if any of these contains " &#44
" code in page directive or reference directives and replace them with comma ",". Fab 40 controls do not work straight away in SharePoint 2013. you need to have install then one by one after copying them over to
new environment. User PowerShell command to Install them. Please share log detail

Installing SharePoint 2007 Integration Kit on BO XI R2 SP5

Similar Messages

Maybe you are looking for