Installing SL right now but I didn't see option for clean install
Hi All,
just got my $9.95 SL cd by mail and I'm installing it now but saw the option to do a clean
install or for that matter an archive.
The only option was to check off for Quick time7 and
something else.
It's running it's course and I'll update but curious.
Thanks.
Message was edited by: M.A
William Lloyd wrote:
The "install" option on 10.6 is most similar to 10.5's "Archive & Install." Except it's more bulletproof.
I guess it's semantics. as i understand it, it completely erases the previous system and installs a fresh new one so in that sense it's closer to the old archive and install, but it does not archive the old system so in that sense it's different.
Similar Messages
-
I have downloaded the ios 6, three times but it just doesn't install. Right now, it's been 3 hours and my iphone is stuck on around 20% of updating ios. If I restore to ios 5, it happens very quickly but on ios 6 it's not. Kindly point out what am I doing
Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
My laptop had water spilled on it 3 days ago, I let it sit as instructed by best buy . I am on it right now but the mouse movement isn't smooth anymore and it is slower. The first time I turned it on it didn't respond at all,can anyone tell how bad the damage really is without actually seeing it ? Do you think maybe it will be just a simple repair or am I looking at a whole new logic board?
Until you take it in so that a technician can look at it, it is all guessing and nothing more.
Allan -
I have iPhone 4 runs on iOS 7 and now iPad mini 2 run on iOS 8 but once I install iTunes 12 64 but windows den will it work for iphone4 ?
Hi bhaity2014,
Welcome to the Apple Support Communities!
I understand that you are concerned that your iPhone 4 running iOS 7 may not be recognized in iTunes 12. Your iPhone 4 running iOS 7 should have no issues being recognized or syncing with iTunes 12. If it is not recognized in iTunes on your Windows computer, please use the attached article for troubleshooting assistance.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Best regards,
Joe -
Running out of space on my C: partition. Need to move CC suite of apps to D: partition. tried to do this in install/file location preferences but it didn't make a difference.
*unselected "Sync music" from the appropriate tab. And iTunes warned: if you do this, we will delete every playlist and song on your iPod*
To change to manually managing an iPod you don't "unselect" sync music, you "select" manually manage songs and videos. If you want to delete songs from iTunes and keep them on the iPod you need to change the update option of your iPod by checking the box beside "manually manage songs and videos" in the Summary tab and clicking Apply. Your iPod will not sync with iTunes in this mode so it can have different content, you can get details here:
Managing content manually on iPod
iPod 101: Fill 'er Up
One major word of caution. If you delete songs or videos from your computer and have no back up other than the iPod you will risk losing them permanently if your iPod fails or you find you have to restore it to solve a problem. You should consider investing in an additional internal or external hard drive to store/back up your music. Alternatively at the very least back up anything you can't replace such as iTunes downloads to CD or DVD: How to back up your media in iTunes
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device. In that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod
I don't have any TV shows so I can't speak from experience here but looking at the TV tab it appears you can only sync shows, there's no manually manage option. Syncing would require that you keep the shows on your computer otherwise they would be removed from the iPod the next time you syncronised with iTunes. -
Hi, i need to cancel adobe membership, i am having a free trial thing right now, but after a while it will renew automatically to a monthly fee, which i don't want to deal with, so would like to cancel it right now
This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive. -
I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store. I have already had to have a technician to look at it and really couldn't figure out what the deal was. I was told that the APP store software should give me no problems but the truth is that it locks up on the software. This machine is only 4 weeks old and I am using 37 g on a 1 T hard drive. There is no reason for it to be locking up. Also, when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that. I successfully used the help program on my pc lots of times. I did not need a $2000. plus machine to just get email. I just wanted to unload on somebody that might understand my pain and after checking out this site...I think there is a few of you out there.
I was told that the APP store software should give me no problems but the truth is that it locks up on the software.
The apps downloaded from the Mac App Store are written by third party developers, not Apple. If you have problems with those apps you need to visit the support area for their websites. Launch the App Store, locate the app name. You should see a support link.
when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that
Go to ~/Library/Preferences. Move the com.apple.helpviewer.plist file from the Preferences folder to the Trash. Restart your Mac, try the Help menu.
If you need help finding that file, hold down the Finder icon in the Dock then click: New Finder Window. From the menu bar top of your screen click: Go > Go to Folder. Type this in exactly as you see it here: ~/Library/Preferences/com.apple.helpviewer.plist That will take you right to that file.
(.plist) files stores information about a particular app or in this case, the Help viewer. Often times deleting the .plist file resolves the issue.
It's fine to "unload"... we understand that you expect your iMac to be stable but there are times when things go awry. That's why we have these forums so that you can you get help.
You may want to read up on how to repair the disk if necessary or reintsall Lion > OS X Lion: About Lion Recovery
Apple - Find Out How - Mac Basics
How to "switch" from PC to Mac > Apple - Support - Switch 101
I'm sorry you feel, "ripped off", but you are using the world's most advanced operating system and it may take some time to adjust to a new OS. http://developer.apple.com/technologies/mac/ -
i am in Iraq right now and i cannot make any schedule for having a call with your support team , however, i forgot the answer for security questions , and also previously i have not summited a rescue Email address is there any way to reset my account?
Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
As to whether you can work with Apple via email on this issue I can't say for sure, but you can contact them via this web page:
http://www.apple.com/support/appleid/contact/
and see if they can help. It's mostly going to be an issue of you being able to prove to them that you are the account owner.
Regards. -
Photoshop elements quit working, I uninstalled it, tried to re-install using the cd, but getting error, any other way to re-install it without the disk ?
Yes.
Download Photoshop Elements products | 13, 12, 11, 10
However, the real issue is why the program is not working. Did you install anything recently?
When you tried to re-install from the disk, did you shut off the antivirus program temporarily?
Have you tried a system restore to a point in time when the program was working properly? -
I bought a new iPhone5s A1533 but I didn't see LTE or 4G even I on 4G or go to best network area and same place note 3 shows LTE very good
<Email Edited by Host>Hello john1bettercom,
I can't think of many purchases these days that would be more exciting than a new tablet, especially were I to be going on a much anticipated vacation like you did. I can only imagine your disappointment when the tablet developed unsolvable problems at the very beginning of your trip.
We do our best to ensure that our customers are aware of our Return & Exchange Promise by publishing it in our stores, on our receipts, and on our website. With that said, I'd like to see what options may exist for you in consultation with your local store. At what store location did you attempt to make your return? Do you recall the name of the manager to whom you spoke?
In addition, I recommend that you contact Microsoft about your Surface Pro 3. As the manufacturer of the product, they should be able to present options for service under the factory warranty.
I look forward to hearing from you and am grateful that you took the time to write to us.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message -
I want to cancel the creative cloud membership
and I follow the instruction but I didn't see the "cancel plan" option in my page. Pls help!! Thank you!Dear John T Smith,
Thank you but still , I can't find the ""cancel plan"" option in my Chinese
language edition page.
And I try to enter my account from English edition but it will transfer to
the Chinese edition page directly.
Pleas help :(((
Thank you so much!!
Cheers,
Alma Hsu
2014-08-03 21:58 GMT+08:00 John T Smith <[email protected]>:
I want to cancel the creative cloud membership and I follow the
instruction but I didn't see the "cancel plan" option. Pls help!! Thank
you! created by John T Smith
<https://forums.adobe.com/people/JohnTSmith> in Adobe Creative Cloud
- View the full discussion
<https://forums.adobe.com/message/6607924#6607924> -
I installed window7 on mac but not able to connect internet. how to install drivers
i installed window7 on mac but not able to connect internet. how to install drivers if it needs to be.
if you downloaded driver updates through bootcamp onto flash drive then once windows is installed, open the flash drive in windows. You'll see an application called Setup. Double click on it and it will install all the drivers for wireless and ethernet and usb.
You cant just tell windows to search for driver updates. These EXPERTS aren't telling you this. -
HOw do I order prints? I see options for cards, books, calendars and slideshows on my computer but not prints?
What version of iPhoto are you using? For iPhoto 9 click on the Share button at the bottom right of the iPhoto window and select Order Prints from the options presented:
Note: I recommend that you crop the photos to the print size you want before ordering so that you can determine what part of the photos gets cropped out rather than let the photofinisher's software do the cropping.
OT -
My mbp 15 retina doesn't start up, i tried to install Windows using bootcamp but it didn't work well
I tried to install windows 7 using bootcamp, i did every steps, when the installation of the windows started i selected the partition created by bootcamp but it didn't install because it said that maybe something was corrupted, then i quit the installation but now my mac doesn't start up, the screen gets black and it says: no bootable device -- insert boot disk and press any key.
I try to press alt/option when it starts but nothing occurs. I don't know what is going on, i really need to use it urgently, i hope i won't loose my data. Well i hope someone could help me!!Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.
Maybe you are looking for
-
Disk Utility won't partition my drive.
I have a LaCie external hard drive with a capacity of 298 GB and 247 GB used leaving 51 GB free. I am trying to create a 30 GB partition of just free space, but when I tell Disk Utility to start, it will start working for a while saying "Modifying pa
-
HT201365 Hello, I just downloaded IOS 7 The Icons have changed How can I restore the original ones?
Hello I just downloaded IOS 7 on my iphone 4s The icons have changed and I would like to know how retore them to the original forms?
-
How does LabVIEW Render the data in 2D Intensity Graphs?
Hello, I was hoping someone could explain to me how LabVIEW renders it's 2D intensity data. For instance, in the attachment I have included an image that I get from LabVIEW's intensity graph. The array that went into the intensity graph is 90000x896
-
When playing a video, it was family guy, the screen pauses for a bit, starts again but without sound. I then have to rewind and start again. It does this quite often, and it plays perfectly on itunes. 60gb btw Windows XP
-
Hi all I've got a real problem here: I've implemented a website which is to be used both by a browser directly, and also using an embedded browser within our application. I finished the standalone browser version, and assumed that the embedded one wo