Installing SLD in Solution Manager 3.2
Please tell me the Step by Step procedure to configure SLD (System Landscape Directory) in solution manager 3.2, I have installed solution Manager 3.2, in that it ask to enter SLD, i have filled the contains but i don't know to activate it and the procedure to configure it. It is urgent
Thanking you
Satinder Pal Singh Lamba
Hello George,
The best possible thing for you now ( assuming that everything was working absolutely fine before the upgrade and that you now continue to have no issues with raising tickets in other satellite systems ) would be to find out the side effects of the SP applied..... or may be look for notes resembling your problem.....
SAP Marketplace is one the one you must look upto.....In the meanwhile just raise an OSS for the same..
Inspire ppl by rewarding..
Regards,
Anand.....
Similar Messages
-
Production SLD in solution manager
Hi,
I have small doubt regarding SLD (System Landscape Directory) in Solution Manager.
We have an Production SLD in Solution Manager dual stack system, and our Production System (Portals, BI, ERP, PI) was configured to Production SLD in Solution Manger.
We are planning to apply patches for our live production Solution Manager System, I know that SLD will stop while doing the Patches on Solution Manager and this will make our production systems stop working.
Therefore I need to know the correct way around this to allow us to patches for our Solution Manager system.
Thanks and Regards
Pavan Morishetty.Joshi,
Thanks for your quick reply.
But in our company we don't want to change our Production SLD from Solman system to any other System (eg. PI, Portal).
If you any other suggestion please update me for applying the patches in Solman System.
Thanks and Regards
Pavan -
Installing License in Solution Manager 4.0 - SAP BASIS 7.0
Hi, I installed SAP Solution Manager, I request my unlimited license at SAP Marketplace, they send me the file, however in slicense transaction - New licenses I load my file and no errors show me. However when finish load of file, license status is not active (green) but it is red and show me as "Not yet valid". I restart my server and delete temporary license and nothing happend, message is the same. Is important know than licenses in new version (SAP BASIS 7.0) and ECC 6.0, installation is not equal than old version. The file with the key must be imported from slicense transaction - new license and no write directly to slicense transaction fields.
Thanks.Obviously you have to upgrade SAPKW70012 first as its the prerequisite of Basis support pack. So just import this support pack then you can only continue for Basis patch.
There is a sequence in which patch can be imported, when you apply any patch it shows the prereuisites of that patch so just follow the same.
Regards
Subhash -
Hi there,
we have a scenario with 2 XI (PI 7.0) Systems (<SIDa>, <SIDb>) with a central SLD for the whole system landscape.
In Solution Manager 4.0, in transaction SMSY (landscape components), one XI is registered as "SAP Exchange Infrastructure --> <SIDa> --> SAP Exchange Infrastructure" with Product Version "SAP Exchange Infrastructure 3.0". The other XI is registered as "SAP Netweaver --> <SIDb> --> Application Server ABAP" with Product Version "SAP Netweaver 2004s".
In my eyes that is wrong (shouldn't both of them be under the same entry?). What can be happened here? How should we resolve that? Could this setting result in problems with EWA or central monitoring?
Thank you,
MatthiasThanks for the answer!
Just that I get you right: Both XI systems have to be registered twice? Each as WEB AS ABAP and Exchange Infrastructure in Solution Manager?
Matthias -
Need suggetions on Central SLD as Solution Manager!
Hi Experts,
I need a help/ suggestion on deciding the Central SLD system in our landscape. We are using Solution Manager 7.01 as the Central SLD for the new Installations and including the old Systems too. But We came to know that SAP is not recommending using Solution Manager as Central SLD System. So please tell me, is it recommended or not and what problems may occur in future if we continue Solution Manager as Central SLD.
Thanks,
Ajay.Read these three blogs. They have the answers that you need.
/people/boris.zarske/blog/2007/06/10/an-overview-of-the-documentation-required-to-set-up-the-system-landscape-directory-sld-of-sap-netweaver
Solution Manager 7.0 and SLD => /people/dolores.correa/blog/2007/10/19/solution-manager-70-and-sld
/people/boris.zarske/blog/2008/03/21/sld-general-recommendation-how-to-set-up-the-system-landscape-directory -
Registering IDM to SLD and Solution Manager
Hi Everyone,
Is there any way to register IDM to SLD/Solution Manager?
Right now, I am having it as a Portal Component only for the UI, with a standalone server for the IDM Dispatcher.
Any idea,
Appreciated
ManuelHi Manuel,
This was recently discussed. Please take a look at these threads and see if they are helpful:
Identity Management 7.2 and LMDB and SAP IDM integration in SLD.
Hopefully they will be of some help.
Regards,
Matt -
Install guide for solution manager 7.1
HI,
i want to install solution manager 7.1 in linux system
and i not find in SDN the install guide
did you now where i can find it?
best regards
Naor ShalomThe installation guides are not available on the SDN but at
http://service.sap.com/instguides
Markus -
Installing license for solution manager in DS (user/PW : sap*/pass)
Dear Experts,
I need to install license for the solution manager in the Discovery system 3.
I made 3 mistakes while logging in, so, the user/PW : sap*/pass can't logon to the system.
Can you please help me find how to log on to the client 001 of the solution manager when the user: sap* and PW : pass is unable to log on?
Thanks
Regards,
SudeepHi Sudeep,
As per the Quick guide for V3, to login to Solman Client 001, the user /pw - : sap*/admin123
Since the sap* is locked, login with admin/admin in client 001 and unlock the required user account.
R,
Chaitra -
Solutions Manager 3.2 Installation
Can Solution Manager 3.2 be installed on top of SLD?
Hi Margie,
Yes Installing SLD and Solution Manager in the same server is the best and convenient also. I will add also other components to add (actually they come with SP12 I do not remember exactly probably with a later SP) like Netweaver Administrator and (NWA, Solution Landscape Management (SLM).
Personally I prefer Option 2 if you are plaining this for a productive system (even you can think about in clustering for HA) if you just want to install a demo or dev option 1 works fine.
Remember when you install Web AS 6.40 ABAP + J2EE It will be created 1 database with two schemas 1 for ABAP and one for J2EE (that will be option 1) wich lead to another option:
if you want you can install Solution Manager 4.0 based in NW04S this also includes Solution Manager Diagnostics which runs in J2EE and in any J2EE is installed the SLD.
The mass shipment is planned for the first quarter of 2006 now probably still in Ramp up of finalizing.
I will recommend Sol Man 4.0 because in my own experience installing/configuring Solution Manager Diagnostics NW04 to monitor the J2EE instances it was time consuming and the configuration guide was not that good hopefully in Sol Man 4.0 is faster to configure.
Best regards,
Juan Jose -
In solution manager system not showing all the system in SLD
Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
RegardsThanks for reply
it is not showing all the systems -
Add sap R/3 enterprise system in solution manager SLD
Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
ShahidHi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday -
Error when Installing Solution Manager for XI
Hi,
I am currently installing the SAP Solution Manager in a new server before I am going to install SAP XI. This is because I need the Solution Manager to generate a Key for the XI installation. I am choosing a typical installation. However, I keep hitting into Installation errors as below:
ERROR 2008-01-04 17:42:37.279
FSL-01002 Unable to create account sinitasd1201\SAPServiceDSS. HRESULT=0x80005009
ERROR 2008-01-04 17:42:37.279
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-01-04 17:42:37.279
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
There are a total of 43 steps at the installation, and this error occurs at Step 2.
There are a few questions which I need some help:
1) Since the server is fresh, and it is a new installation, when defining parameters during installation, do I choose "Register in existing central SLD" or "Configure a new SLD"?
1a) If I need to choose "Register in existing central SLD", what values should I input for SLD HTTP Host, SLD HTTP Port, SLD Gateway Host and SLD Gateway Instant Number?
1b) If I need to choose "Configure a new SLD", what value should I input for the Object Server Name?
2) Any ideas what the errors above is about and how to solve them?
Please kindly advise, thank you.Hi,
Thanks for your help. Now I am able to get pass step 2, and now I am hitting an error at step 34, "Start Java Engine". The error in the log file is:
ERROR 2008-01-09 09:48:08.629
CJS-30150 Java processes of instance DSS/DVEBMGS00 [ABAP: ACTIVE, Java: UNKNOWN] did not reach state PARTRUNNING after 20:00 minutes. Giving up.
ERROR 2008-01-09 09:48:08.629
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
Do you know how to overcome this issue? Please kindly help. Thank you. -
Connection XI - SLD - Solution Manager
Hi everybody,
I am facing the following problem.
The SLD is installed in the Solution Manager Host. Solution Manager was installed before XI
was installed. So, the managing of the SLD is carried out in the SLD of the Solution
manager. However I can only import the objects from the SLD to the Integration Builder if I
create the objects in the Local SLD of the XI. How can I connect the XI system with the SLD
of the Solution Manager? I have the same problem with proxys in R/3 (SLDAPICUST).
So, Do I have to create the objects in SLD XI Host or by means of Solution Manager???
Thanks in advance.
Regards.
CarlosDepends on your version of SAP...
I would say yes to be on the safe side...
PI7.0 creates these entries but does not use them.
XI3.0 does (i think upto a certain patch level...).
This is always a useful tool...
http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm -
Solution Manager 4.0 install error logging in for DDIC step 29
Has anyone else seen the error 'Test logon to SAP System <sid> failed"? It states that it cannot login for DDIC. This is at step 29 during the install of the solution manager 4.0.
We are running on a Windows 2003 Server/Oracle 10g.
Any help would be greatly appreciated. We've been hitting this same error for the last couple of days.
Thanks,
DBBDear Derrick,
I have run into the exact same problem!!!!
During step 29 of the install does it ask you to enter the DDIC password?
It will ask you twice for a password if both the times the login fails then you will have no other option but to uninstall and reinstall Sol Man 4.
The tactic that worked for me is that when it will ask u the passowrd the first time.......before you enter the password.......login in to Sol Man 4 using the default DDIC password 19920706. then change the default password. And then go back to the install and give this new ddic password.
This is the only thing that worked with me.
Let me know if anything else works.
Email me @ [email protected] if you have any other questions.
thanks
Mikir -
Solution Manager 3.2: SLD server connection is inactive SCDT_LIS_IF011
Trying to execute an automatic data transfer from SLD to Solution Manager 3.2 with transaction SMSY_SETUP, I have recieved the update log message:
The SLD server connection is inactive
Message no. SCDT_LIS_IF011
SLD Connection Test displayed:
No business system maintained in SLD
--> check data integrity within the SLD
We customized transactions SLDAPICUST,LCRSERVADDR, SMSY_SETUP->Edit->expert setting as requested in SAP documentation and definied technical, system and business landscapes in SLD (SLD server log: no errors found).
Some suggestions how to fix it?Hello Christine,
due to the fact that we (up to now) have no need for a business landscape, we created one manualy to test if the check would get a bit further then.
We created a business landscape with the following settings:
Technical System: Web AS ABAP
System: <solution manager>
Business System Role: Application System
Related Integration Server: (no integration server defined)
Testing the Connection wit SLDCHECK we got this error message:
23.11.2005 Exchange Infrastructure: SLD Connection Test 1
Properties of RFC destination SAPSLDAPI
RFC host: %%RFCSERVER%%
program id: SAPSLDAPI_J2E
gateway host: solman32
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server address settings:
host name: solman32
port number: 50100
Use transaction SLDAPICUST if you wish to maintain the SLD server address
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Testing the SLD API
SLD API ping was successful
Clearing the local SLD cache
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
solman
Calling function LCR_GET_BS_DETAILS
Retrieving data from the SLD server...
Function call returned exception code 5
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Maybe you are looking for
-
How to create hyperlink on column.
Hi all, its very urgent. I have two pages first page like header level and secound page like lines level. in first page having requestid lov,find,create buttons and advance table region. secound page having only advance table region with add another
-
When running make for a C++ project generated by kdevelop it will spawn tons of "sed s%^.*/%%" and "sh" processes and makes the pc unusable. This happens when trying to build it from kdevelop or running make myself from the terminal. [envil@insurgenc
-
Business Intelligence Tools Connection help
Hi Guru, sorry i am quite new to Business Intelligence.. and i have go through some ebook on Business Intelligence found on SDN.. wonder could anyone tell me more on how to use those tools i know about <b>BExAnalyzer BExWebApplicationDesigner BExQuer
-
Runtime error R6025 when closing adobe captivate 6 or 7
Everytime I close Captivate on a system running Win 8.1 (did it with previous version of Windows, too), I would get this runtime error R6025 pure virtual function. Any resolujtions to this error would be appreciated.
-
windows recently updated and I updated my antivirus and since then when I go into my on line school web site I cannot open any of my courses.