Installing Smart Card Reader Software

I'm trying to install a cherry smart card (CAC) reader on my iMAC G5 OSX 10.4.11. I have downloaded the driver but see that I need to install PCSC lite 1.1.1 of PCSC Framework before loading the driver. To load those middleware products I have to perform (I think) a manual installation, which requires entering text such as: "./configure" etc. I don't know how to get to something that looks like a "DOS" page on my MAC that would allow me to manually enter the program. I've searched high and low for answers...can anyone help?

Thanks. That's the pointer I needed. I'll try loading the instructions in Terminal and will let you know if that worked.

Similar Messages

  • What kind of driver do I need to use for HP Elitebook 8440p RICOH Smart Card Reader?

    I'm using Arch linux x86_64 and need to install Smart Card Reader, but I can't find any drivers for it.
    Best regards,
    Taavi

    What operating system is it? Are you sure you put the card in the correct way? [not trying to be mean here]

  • How to install a smart card reader.

    I am trying to install a smart card reader for work.  There are no prompts when connecting via USB or anything else. 

    There shouldn't be a prompt when you connect an empty card reader.  Insert a memory card into it and it should appear on the Desktop.

  • Smart Card Reader 2 syncing issue - 9 digit ID

    I have a phone I am trying to set up for a customer with the BlackBerry Smart Card Reader 2.  Both the phone and the card reader are running the same version of the software, as they both have the version that is installed on my desktop (5.0).  However, the card reader has a 9-digit ID name, and the BlackBerry will only accept 8-digit ID information in the selected box.  I've read online of people having this issue but haven't found a fix.  Can anyone assist me with this problem?
    BB in question is a Bold 9930 on Verizon.

    Hey there,
    What operating system are you currently using? Also are you receiving any error messages when trying to use the smart card reader? Have you been using only 1 smart card, or do you have a extra one handy that you could test with?
    Thanks,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Smart Card Reader 2 on Windows 8

    I have a need to use a smart card to log into my work laptop.  Unfortunately, my laptop does not have a built-in smart card reader and I'd like to avoid using an external USB smart card reader if possible.  For this reason, I purchased a Blackberry Smart Card Reader 2, which from what I could find online, should be able to provide the same functionality as an external USB smart card reader.
    I installed the software and rebooted the computer.  However, when I try and discover the Smart Card Reader (SCR) the laptop seems to see the SCR, but then the connection window closes and I never get the chance to enter the PIN.  Reviewing the eventlogs and system processes, I can see that BlackberrySCRService.exe process which is running as a service quits after the device is discovered.
    I've tried running the Windows compatibility tool on the process which suggested running in XP compatibility mode, but that did not help.  Can somebody tell me how I can use my Blackberry SCR 2 on my Windows 8 laptop?  Thanks in advance.

    hello, I don't have any knowledge about that reader.
    You can find the manual here:
    http://docs.blackberry.com/en/admin/subcategories/​?userType=2&category=BlackBerry+Smart+Card+Reader
    My personal understanding is that this reader is not compatible with Windows 7 and Windows 8, and only if that BlackBerry is linked to a BES server.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Broadcom USB Smart Card reader not working

    After upgrading my Vista Business SP2 (32-bit) to Windows 7 Ultimate RC (32-bit) my Broadcom USB smart card reader does not work any longer (Dell Latitude E6400 with built in smart card reader).
    The newest available driver from dell support was already tested (Broadcom, driver date 09/23/2008, version 1.0.0.1, digitally signed WHQL, released by dell in March 09), but the device can not start (Error code 10) with Windows 7.
    With the Microsoft WUDF Driver (Usbccid, driver date 06/21/2006, version 6.1.7100.0) the device starts but whenever I insert my smart card an additional device is detected (other device - smart card) but no driver found - Error message is: The drivers for this device are not installed. (Code 28).
    What else can I try to get this reader working again (with vista sp2 the smart card reader was working fine with the broadcom driver)?

    I have also an USB card reader that works fine on XP PCs but Win7 does not recognise it, can msft make a sd reader driver that works pls.
    Hi
    Sorry, but the way the industry works is that Microsoft develops Windows and Hardware manufacturers develop drivers for their products. Microsoft does maintain a complete division (MSDN) that is dedicated to assisting hardware and software manufacturers in developing their products for compatibility with Windows.
    All of the drivers that are contained on the Windows installation disk and on Windows Update are placed there by the manufacturers of the devices. This is a service that Microsoft provides to help these manufacturers to distribute their drivers.
    What you can do.
    1. Check with the computer manufacturer for updated drivers for that device. This is your best source, since the computer manufacturer builds, tests, and sometimes develops their own, custom drivers to work with the hardware on their PCs.
    2. Try to determine the name and manufacturer of the device using Device Manager and MSInfo32. Once this information is found, try to find that manufacturers website and look for the latest compatible drivers.
    3. Check to see if there are any users forums on the PC manufacturers or device manufacturers websites. Ask there about any known issues with this particular hardware device or if the device is no longer supported.
    4. If the drivers are found but are only available for previous versions of Windows, install the drivers using the Windows Compatibility Mode. HOW TO: Install a Hardware Device Driver using Compatibility Mode
    Right now, we are in a unique situation since we are using an operating system that is still in the pre-release phase. Many hardware/software manufacturers will be ofrficially supporting their products for Windows 7 until after the General Availability date of October 22, 2009.
    Hope this helps.
    Thank You for using Windows 7
    Ronnie Vernon MVP

  • W520 Smart Card reader does not show up in Device Manager

    W520 Smart Card reader does not show up in Device Manager.
    It was working before and now nothing.  Nothing happens when SD card plugges in.
    Could my smart card reader stop working or is this a configuration issue?
    Any thoughts?
    thanks
    Ian

    Hi  Ian,
    Welcome to the community, and thanks for the post.
    The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
    http://support.lenovo.com/en_SG/downloads/default.page?
    After that check if the issue get resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • MS Remote Desktop and smart card reader

    I have installed MS Remote Desktop Conn. on my iMac and connected a smart card reader via the USB. Although my reader energizes when the computer is on, the computer doesn't seem to recognize the reader. When I insert a CAC card into the reader and try to log in remotely, I continue to get a "username/password" box instead of the CAC PIN number. Do I need to install some kind of smart card driver or does Apple already have it? I'm at a loss as to how to fix this.

    I was able to get rdesktop 1.6.0 to install on my Mac and I was able to get CAC log-in to work.
    However, the installation is a little tricky. I downloaded rdesktop 1.6.0 from this link:
    <<http://www.rdesktop.org>>
    My instructions for installation:
    1. Make sure Xcode Tools is installed on your computer. It should be on your OS X install disk.
    2. Find out where your X11 libraries are located:
    -From the Finder menu, selct "Go" >> "Go to Folder..."
    -Type (without the quotes) "/usr/X11", and click "Go"
    You should see a bunch of folders. Make sure the "include" and "lib" folders are there. Otherwise you need to find out where the X11 "include" and "lib" folders are located on your computer.
    3. Download rdesktop and place the (unarchived) rdesktop-1.6.0 folder on your Desktop
    4. Open the X11 application (should be in your Utilities folder)
    5. In the X11 window type the following (without the quotes):
    "cd Desktop/rdesktop-1.6.0 && ./configure --enable-smartcard -x-includes=/usr/X11/include -x-libraries=/usr/X11/lib && make && sudo make install"
    4. Hit enter. When prompted, enter your administrator password and hit enter.
    rdesktop should now be installed in the following folder:
    /usr/local/bin
    So, to launch rdesktop with smartcard log in enabled, open the X11 application (or Terminal application) and type the following (without the quotes, and replace your.server.address with the server address):
    "cd /usr/local/bin && ./rdesktop -r scard your.server.address"
    Hit enter and it should launch a new X11 window that will try to access the remote server where you should be prompted for your PIN.
    To explore more options with rdesktop, open X11 and type the following (without quotes):
    "cd /usr/local/bin && ./rdesktop"
    Hit enter and you should get a list of options available to rdesktop.

  • ACR122U smart card reader not recognized after reboot...

    I am new to POS Windows and have been working with wondows for ever. I was using ACR 122u contactless usb smart card reader with windows XP and communicating with it using java with no problems. Then our I changed the OS to windows Pos ready 2009 and we found out that USB card reader has to be unplugged and plugged back in after rebooting the computer. other than the OS everything else is identicle (driver, reader, java program, ect..). Can any one tell me what could cause this problem and what I can do to solve this.
    I have cheked the device manager and under USB controllers it says that it is unrecognized deivice..I tried changing the reader, changing the port and(actually the reader is pluged in to a linksys external usb hub, but changing this to a internal port did not make any difference)  tried chagning some settings in control panel.
    1. I checked the power option of the root usb hub.
    2. Changed the driver.cab to a normal driver.cab obtained from the normal xp version. Uninstall the driver and reinstall it.
    So far this hasnt been working.
    I hope someone could help me with this.
    ~Tharanga

    After extensive tests with Win 7 Embedded and ACR122U, I can confirm the same problem. It seems that reader firmware hangs and the only way to recover is to unplug and plug again the reader. We shall repeat the tests with readers from other manufacturers.
    For the tests, we use a Win7 Embedded Standard PC with an ACR122U connected. We installed and configured the ACS Monitor program to start automatically with windows. We made a small utility to restart the PC every minute and we placed it on the Startup directory.
    Within the first 5-10 reboots, the reader fails and the ACS monitor program shows " No reader connected" and no reaction from the reader. If we shall unplug and plug the reader again to the USB port everything works fine again.
    Kostas P.

  • T61/X61 integrated smart card reader

    Hi,
    Does anyone know if the optional smart card reader on the T61/X61 laptops are based on PCMCIA or Expresscard standards, what is the exact make and model, and if they are CCID compliant?
    Thanks.

    http://shop.lenovo.com/SEUILibrary/controller/e/na/LenovoPortal/en_US/catalog.workflow:item.detail?GroupID=38&Code=41N3043
    Add Smart Card security technology to ThinkPad notebook computers equipped with a 54-mm ExpressCard slot. The Gemplus ExpressCard Smart Card Reader from Lenovo offers an ideal interface between a portable computer and a smart card, to control access to databases or corporate computer networks. A smart card is a plastic card that contains personalized information. It's function can range from simple data storage to more advanced memory and processing capabilities. The Gemplus ExpressCard Smart Card Reader from Lenovo is reader hardware only and does not include blank smart cards or smart card management software.
    Features and Benefits:
    Reads and writes(1) to all ISO-7816 compatible smart cards.
    Reader hardware connects to any ThinkPad equipped with a 54-mm ExpressCard slot.
    Includes drivers for Microsoft Windows 2000 and Windows XP to help get you up and running quickly.
    And it's backed by Lenovo's limited warranty with renowned Service and Support available from IBM.
    (1) Although this reader can be used to access any ISO 7816-compliant Smart Card, Lenovo's primary intent is to enable ThinkPad customers to integrate a security authentication application of their choosing.
    have a look it is an express card version built by Gemplus, not sure about the rest.
    Message Edited by wjli2 on 06-25-2008 12:42 PM

  • Smart Card Reader - How to turn off logon screen from reboot or wake up

    I just set up the bluetooth reader on my laptop and now when my laptop wakes up or on reboot the BB smart card reader is there to logon.   I rarely use my smart card reader on my laptop, i use it primarily on my phone.  I don't want to unistall it but I dont need to see that screen.  Any one know how to shut it off?

    Most likely after installing it changed the PC log on type to the reader.
    In control panel (assuming you have a windows product) you can change how a user logs on.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Unable to pair BB Smart Card Reader with Pc/Laptop

    Hi, I have 2 new BB smart card readers (SCR) and Im trying to pair with the PC and I can not. The SCR software can not detect the SCR. I put the ID of the device on the software and is trying to looking for it but can not. It says "Unable to connect to the specified Blackberry smart card reader". I have another SCR and I don't have problems to pair with the computer only with the new ones. The SCR have the last OS. Do you know what could be the problem? I think is a bug of the new SCR.

    mzamora wrote:
    Andy, may be nothing so where can I post it? Is there a general discussion?
    Hello,
    if I were you, I'd post in the "General Blackberry Smartphone Functions and Features" forum.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Smart Card reader for T410

    Hi everybody, I'm new in this topic...
    I want install a Smart Card reader on my Thinkpad T410 2537-WBB but I don't say what I need. There are two component, the 60Y5029 and the 60Y5030...what is the right one? And I must also buy a cable 45M2894? Thanks and sorry for my english
    Solved!
    Go to Solution.

    h2bazza wrote:
    Thanks wditters!! What is the difference between 60Y5029 and 60Y5030? Can you suggest me a store?
    The difference is possibly a brand thing, for instance Gemplus and or another brand. Not a clue and not really important. Any Lenovo dealer should be able to order the parts directly form IBM. End users cannot.
    Lenovo Premium Business Partner
    X1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

  • SMART CARD READER ProBook 6570b problem

    Last august, i bought a ProBook 657b, with a smart card reader installed (standard)
    A few days after I bought it, it worked perfectly and I could read the information on my ID
    But since a day or 2, it does not work anymore.
    I think the PC has troubles finding this device.
    Is there someone who has any idea how I can solve this problem? 
    GRTZ

    Hey there,
    What operating system are you currently using? Also are you receiving any error messages when trying to use the smart card reader? Have you been using only 1 smart card, or do you have a extra one handy that you could test with?
    Thanks,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Why does a smart card reader kill MacOS?

    I need a smart card within a virtual machine on my Mac. The trouble is, every time I connect the reader, my MacOS stops working properly.
    When the smart card reader is connected before the Mac is turned on, then I can't login: After entering the password, it hangs with the spinning color icon.
    I can boot without the reader, though. If the reader is plugged in after boot, this happens:
    Safari doesn't start up, all I see is the color spinner. Finder gets blocked as well while Safari is trying to start up (i.e. forever)
    If I have a Terminal open, then I can "kill -9" the Safari process, which unblocks the Finder.
    When I then try to shut down, it hangs with a white screen, and never properly finishes until power off.
    How can I debug or solve this problem?
    Thanks! Martin

    It's a very common device (Omnikey 3121), which should be compatible. Nevertheless, I installed drivers from the manufactor's site to see if they make any difference. On reboot after driver installation I got a kernel panic within the HID drivers. Very strange.
    Kernel Extensions in backtrace:
             com.apple.iokit.IOHIDFamily(2.0)[994495B5-FB34-3DB5-B47A-D2A732E52F33]@0xffffff 7f811c1000->0xffffff7f81232fff
                dependency: com.apple.driver.AppleFDEKeyStore(28.30)[2A8A5F6B-0A7C-33A0-8E5B-4C10F646EC4F]@ 0xffffff7f811b6000
    After reboot it seems to work fine, but I'll have to check some more.

Maybe you are looking for