Installing software update going wrong
HI,
downloaded the software update for my phone nd installing it at the moment and it has been on the same spot for 2hours now..and its just backing up my data not yet installing the updates..am scared of pulling out the ba3 because this might destroy the phone...i really dont know what to do anymore...
Help!!!!
Hello,
(Credit JSanders)
There are two methods of recovery for you to try:
One:
Open Blackberry Desktop Software & Connect your device with PC using USB cable, without inserting battery.
You will get three option Retry, Update Or Cancel, then click on update.
Once it is to the stage of the update "initializing handheld", then insert battery.
If this does not work, and you remain stuck on the backing up the Social Feeds database, go to the second method below.
Secondly:
Start your BlackBerry in Safe mode. Article ID: KB17877 How to start a BlackBerry smartphone in Safe Modehttp://www.blackberry.com/btsc/KB17877
Connect to the BlackBerry Desktop Software and allow your handheld to connect. If you are prompted to upgrade, cancel the upgrade for later.
IF you cannot connect or your Desktop Software does not recognize your device while in Safe Mode, please follow the directions here to force the detect: Article ID: KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
Go to Device > delete > SELECT DATA > select to delete both the Social Feeds and Smart Card databases, and follow the remaining prompts to complete it.
Now, you can return and click to upgrade the device through the Desktop Manager, or reboot the BlackBerry in normal mode and continue the over the air upgrade.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
When I try to install software update to my phone, it sends the message that I am not connected to the internet. What am I doing wrong?
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.
-
My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?
Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery. -
Recently erased my entire mac HD do to mavericks update going wrong. I do not have a back up for my music. But my itunes match account has all my music. If i add this computer with my itunes match will it put all the music i had back in my itunes library or just upload the little bit of music i purchased on itunes in the past that im only seeing now in my itunes? I do not want itunes match to sync or upload the little bit of purchased music i have on my itunes now..Please Help Thanks..
Hello gogreenj14,
If you had iTunes Match updated with all of your non iTunes purchased content already, then yes, when you enable iTunes Match with the following article it will have all the content that has been uploaded to iTunes Match will be available for download.
iTunes: How to add a computer or iOS device to iTunes Match
http://support.apple.com/kb/ht4913
Open the latest version of iTunes on the computer you intend to add. You can download the latest version of iTunes here.
Sign in with the Apple ID you use with iTunes Match.
Choose Store > Turn On iTunes Match.
Click the Add This Computer button.
When prompted, enter your Apple ID password.
iTunes will automatically begin scanning your computer's library for matches.
A status indicator will allow you to track progress. You may also manually pause and resume the process at any time by clicking the Stop or Start button.
Once iTunes has completed matching and uploading your iTunes library, your music in iCloud will be integrated into your local music library. A download button will appear to the right of any content that you have in iCloud that doesn't already exist on your computer.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I was trying to update. Now I have a screen "Installing Software Update" and it's stuck
Trying to update. The screen has been stuck on "Installing: Software Update" and I can't exit or do anytihng.
http://support.apple.com/kb/HT1808
-
I get an error message when trying to install software update 4.2.8
"problem downloading, network connection timed out. Check network connections."
Anyone one else had this problem?Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799 -
Applying all update\patches during 'install software update' step
Hi,
I have created software update group (around 10 updates\patches) and deploy it to 'unknown computers' collection. Ts 'Install software update' step scans through and only installs 2 updates out of 10. I have kept deploy property as 'required' while publishing
on 'unknown computers' and 'install software update' has 'All Software update' selected (other option is mandatory update'). I want to have all the 10 required update to be installed . any idea what should be the settings on 'deploy' prperty for software group
that install all the updates in the group during 'install software update' step? Any pointers will be appreciated
Regards,Hi,
Yes , they need a reboot and reboot is happening automatically. I believe, once reboot is done, other patches should take over with installation. I don't see any information for another updates that are part of same software group. For these 2 succefully
installed updates log has below that indicates they reboot and finish.
WUHandler has log:
1. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB2862330) (35dcb297-873a-45af-bb19-e8b18aedd5bb, 202) WUAHandler 2/5/2014 8:09:02 AM 2760 (0x0AC8)
2. Update (Missing): Update for Windows 7 for x64-based Systems (KB2834140) (88152097-0294-4098-b27c-d2fd479e9831, 202) WUAHandler 2/5/2014 8:09:03 AM 2760 (0x0AC8)
Update 1 (35dcb297-873a-45af-bb19-e8b18aedd5bb) finished installing (0x00000000), Reboot Required? Yes WUAHandler 2/5/2014 8:09:06 AM 2348 (0x092C)
Update 2 (88152097-0294-4098-b27c-d2fd479e9831) finished installing (0x00000000), Reboot Required? Yes WUAHandler 2/5/2014 8:09:09 AM 356 (0x0164)
Update (35dcb297-873a-45af-bb19-e8b18aedd5bb) has finished the post reboot operation. HResult: 0x00000000. WUAHandler 2/5/2014 8:10:46 AM 2152 (0x0868)
Update (88152097-0294-4098-b27c-d2fd479e9831) has finished the post reboot operation. HResult: 0x00000000. WUAHandler 2/5/2014 8:10:46 AM 2152 (0x0868)
Any pointers to figure out the status of other patches\updats that are part of same group?
Regards, -
What to do? Operating system update stalled - message installing software update less than a minute
What to do? Operating system update stalled - message "installing software update less than a minute" but that has lasted hour
Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart.
-
CAN I INSTALL SOFTWARE UPDATES TO MY MACBOOK PRO WHICH I BROUGHT FROM U.S.A & I'M USING IT IN INDIA??? PLS SAY YES OR NO
URGENT !!It shouldnt matter where you purchased the computer. Just log into the Mac App Store and you will be able to update the software.
-
Trying to install software updates and keep geting this message. "You don't have permission to install updates" Anyone know how to fix?
Thx! for helping!! Yes I have and it dosen't seem to want to change anything. It verify and then I repair and there is repair done but no change.
-
The screen is frozen while installing software updates. Say about 2 minutes and it has been more than hour. How can I cancel or do something about it? Is it ok to unplugg it? Please advise.
Really?
Is there no other option? No magic key combo that brings up a secret menu?
My imac just froze during a software update install and I too do not know what to do. -
Install Software update install Office updates?
Hi ,
Does 'Install software update' task in configuration manager installs office patches or just OS pacthes? I have Office patches (around 100 ) software update group is advertised\deployed to my build and capture machine. Once machine is build, i don't see
any of the office patches installed. I have added 'install software update' step after Install application and packages step (so that office get installed first).
Regards,Assuming that you are talking about within a task sequence. This task installs "all" or "all required" (depending upon which option you pick) software updates that are deployed (and applicable based upon a compliance scan of course) to the target
system -- it doesn't matter what kind of update it is. During OSD, the updates need to be deployed to the same collection that the task sequence is.
Jason | http://blog.configmgrftw.com -
I just installed software updates to my computer and after restarting cannot access Safara. The message says because of a TelevisionFantaticsToolbar plugins. Cannot find on my computer. How do I delete this and regain access to Safari?
Save and/or quit your applications & documents Go to Applications>Utilities Folder Click Disk Utility Click the Volumne (HD) that you want to check. Click the Repair Disk Permissions button. (Don't worry about verifying) At the bottom of window when the repairs have finished, you will see the “most important thing”: Permission Repairs Complete The privileges have been repaired or completed on the selected volumne.
Restart your computer to confirm repairs.
http://docs.info.apple.com/article.html?artnum=106214 http://docs.info.apple.com/article.html?artnum=25751
http://docs.info.apple.com/article.html?artnum=25751 -
Failed to run the action: Install Software Updates. CI Version Info timed out?
Hi,
I have a task sequence that runs on servers to automatically install the advertised updates in software center. I have one server that is not installing these updates and from the smsts log I see an error about "CI Version times out" Does anyone
know what this means? TIA
<![LOG[One or more updates failed to install, hr=0x87d00314]LOG]!><time="06:37:50.387-120" date="04-25-2015" component="InstallSWUpdate" context="" type="3" thread="31312" file="main.cpp:202">
<![LOG[Process completed with exit code 2278556436]LOG]!><time="06:37:50.387-120" date="04-25-2015" component="TSManager" context="" type="1" thread="26924" file="commandline.cpp:1123">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="06:37:50.387-120" date="04-25-2015" component="TSManager" context="" type="1"
thread="26924" file="instruction.cxx:804">
<![LOG[Failed to run the action: Install Software Updates.
CI Version Info timed out. (Error: 87D00314; Source: CCM)]LOG]!><time="06:37:50.434-120" date="04-25-2015" component="TSManager" context="" type="3" thread="26924" file="instruction.cxx:895">
<![LOG[Set authenticator in transport]LOG]!><time="06:37:50.434-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924" file="libsmsmessaging.cpp:7734">
<![LOG[Set a global environment variable _SMSTSLastActionRetCode=-2016410860]LOG]!><time="06:37:50.636-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924"
file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="06:37:50.636-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924" file="executionenv.cxx:668">
<![LOG[Clear local default environment]LOG]!><time="06:37:50.636-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924" file="executionenv.cxx:807">
<![LOG[The execution engine ignored the failure of the action (Install Software Updates) and continues execution]LOG]!><time="06:37:50.652-120" date="04-25-2015" component="TSManager" context="" type="2"
thread="26924" file="instruction.cxx:962">
<![LOG[Set authenticator in transport]LOG]!><time="06:37:50.652-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924" file="libsmsmessaging.cpp:7734">Please have a look at this similar post:
https://social.technet.microsoft.com/Forums/en-US/7ebe1966-1417-4e5e-ba29-1aac6b5b0de1/sccm-2012-deployment-of-updates-failes-with-ci-version-info-timed-out?forum=configmanagersecurity
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
How do i clean up my macbook air to install software updates?
how do i clean up my macbook air to install software updates? It says that I need to clean up the startup disk because I do not have enough space left but I don't know how to do that. Can anyone help me?
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.
Maybe you are looking for
-
How do i burn my itunes library onto a cd so that it can be played in a car
I want to burn some of the songs within my itunes library onto a cd to give to my Aunt. I tried this once already and the songs would play on radio but only from one speaker. How do I burn my playlists onto cd and have it play correctly? (out of both
-
PROBLEM!! How to upgrade on apex 3.1.2?
Hello everyone! I am new, and so far I have only worked with. Net tools. I installed Oracle Express, and download apex_3.1.2.zip but not no way to upgrade. I pray that we someone explain in details how difficult to make. On the computer I have Vista
-
Some texts do not display correctly (appear as squares)
Since I got my Z10 some of the texts everywhere else on the phone do not display properly. They appear as squares. Any help? See the image attached below for more details.
-
So, I know this has been asked before. But, has anyone heard from Apple?
So, I know this has been asked before, but I'm just looking to see if anyone had heard from Apple on this at all. The minimum volume on my iPod Classic 160gb is too high, and I can't lower it. (AKA when I kill the volume, I can still hear music). I c
-
TS4036 i cloud backup required message frozen , cant switch off or anything !!
My i pad has frozen with amessage that i-cloud backup need ing to be done. Cannot switch off so don't know what to do.