Installing solaris 10 on HP DL140 server

Hello all,
I have installed sol 10 on HP DL140 server successfully.I am not able to configure the NIC.I downloaed the driver for the Broadcom card(Which is coming with the serer) from HP site and installed.Still now I am not able to ping outside of my machine.,
When I issue ifconfig -a it is showing me the le0 ,the loop back address.
Any suggestion are welcome.
with regards,
sunwinman

Asutosh_Gopinath wrote:
The RAID controller is combining all the 6 disks and creating one logical unit of 349GB which is seen by Solaris OS.
I want to configure RAID in such a way that Solaris sees all the 6 disks(72GBx6) separately.on the system post on power up, you should see ORCA banner select F8
you should also make sure you have the latest firmware loaded as well
     HP Smart Array verify which one you have http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00572169/c00572169.pdf ?

Similar Messages

  • Installing solaris 10 on an IBM server with ServeRAID

    G'day,
    I want to install solaris 10 on my IBM xSeries eServer 235 and install starts fine but straight away it complains about not finding any HDDs and exits.
    I do have HDDs installed, three infact.
    They are SCSI on the IBM ServeRAID adaptor and i have used ServerGuide to reformat the disks but solaris just cannot find them.
    Why is this??
    thanks,
    jason

    I did some idgging and i pretty much concluded that
    we need serveRAID drivers for the OS be find the
    disks.I've got the same thoughts. Though Solaris 10 is listed in Release Notes for the latest IBM ServeRAID Support CD, and CD itself contains floppy images for what it thinks is a 'solaris drivers', but either those drivers doesn't work or there is wrong drivers. Doing as described in "Installing" readme doesn't give much result. BTW - it's initial release of ServeRAID Support CD where support for Solaris OS is offered.
    So all the OSs in the serveraid list are the oes that
    serveraid will provide a driver for automatically.If only you have had updated both Server BIOS and RAID Adapter firmwares as described in relative readme's.
    I am not sure what to do from here, sell the damn
    server i supose!Me too.
    I've got RHEL ES4 installed in RAID logical volumes, directly from OS installation distro, without using ServeRAID Support CD drivers. But I was supposed to use Solaris and not the RHEL.
    Funnily enough when i got it a heat sink fell off the
    northbridge or chipset, not sure which it is. A tad
    dodgy.

  • Installing Solaris 10 on HP ML370G5 server -No disks found

    I get no disks found.
    There is no way to disable Smart Array P400 using ROM based settings which appears after pressing F9.
    It seems the DISABLE option for P400 controller is removed.
    Has anyone had success in disabling the array controller on ML370G5
    server?
    please help
    thanks
    asutosh

    Asutosh_Gopinath wrote:
    The RAID controller is combining all the 6 disks and creating one logical unit of 349GB which is seen by Solaris OS.
    I want to configure RAID in such a way that Solaris sees all the 6 disks(72GBx6) separately.on the system post on power up, you should see ORCA banner select F8
    you should also make sure you have the latest firmware loaded as well
         HP Smart Array verify which one you have http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00572169/c00572169.pdf ?

  • We can't install Solaris 8 - IBM PC SERVER 315

    Hello:
    We are trying to install Solaris 8 (Intel) (02/02) in an IBM PC Server 315.
    Some words about it:
    - 128 Mb RAM
    - Pentium Pro 200 Mhz
    - Adaptec AHA-2940U/2940UW Ultra SCSI in PCI bus1,Slot 4 (Info from Solaris install) (Target 7)
    - Hard Disk IBM SCSI (Target 0)
    - CD-Rom SCSI IBM CDRM00203 (Target 6 of SCSI) (info from Solaris install)
    We have a big problem.
    We can't install Solaris from CD.
    After Loading kernel , when it begins Searching /dev and /devices...we see this text in the screen repeated a lot of times:
    WARNING: /pci@0,0/pci1011,24@2/pci9004,8178@1(adp0):
    timeout: abort device, target=6 lun=0
    And before this something like it has some problem and begins a resinc ??
    Please Could you help us?
    Solaris has been purchased from Sun on 12 March 2002
    A lot of Thank's!
    P.D: Please, excuse my poor English.
    A lot of thank's.

    two other severs wouldn't run the cd either? Break it down a little it will be more solvable. We will create two separate problems with this. First we will check the cd disk itself. Put in another system and install solaris. If that works, move to the cdrom drive....move it to the same computer you just installed solaris on...if it works then it is another problem.

  • How to Install Solaris 10 on Sun Server

    Dear All,
    Can any one help me to Install Solaris 10 on Sun Server.
    Or if you guys can suggest me which document i can refer for Solaris 10 installation.
    Thnaks in advance to all.
    Rgds,
    Shrinet

    You can go to doc.sun.com for all Solaris documentation. This should be the link you need, which is for the latest version of Solaris 10 (10/09).
    http://docs.sun.com/app/docs/coll/1236.11?l=en
    If you need an older version, you can find them all here:
    http://docs.sun.com/app/docs/prod/solaris.10?l=en&a=view
    -- Alan

  • Problem on installing Solaris 10 on Cisco UCS-C24-M3S2 rack server.

    I've got issue on installing Solaris 10 on Cisco UCS-C24-M3S2 rack server. Solaris 10 doesn't recognize UCSC-RAID-ROM55.

    Hi dipaktimsina,
    From the documentation below it looks like Solaris doesn't have support for the embedded raid controller with the ROM55 chip. 
    http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
    let me know if you have any questions and don't forget to rate any useful answers.

  • Linux guy wants to install solaris 10 via nfs using centos as nfs server

    well in linux when installing this way I simply copy the dvd install image to an nfs share (or do mount -o loop "isoimage" /nfsmountdir), copy the boot.iso so a cdrom and do a "linux askmethod" during install and then specify the nfs server and dir.
    I want to learn sun and want to start by really understanding the install and how to set up slices etc. I would really like to do this using nfs using my centos box as the server as this method at least when installing linux is much mush faster.
    so can I do this and if so what are the commands. I did see some documentation but it was for installing from a sun nfs server. but I need to install from the centos as the server. I already have the iso's for the 5 cdroms as well as the dvd image. if possible I would obviously like to use the dvd image.
    thanks and remember I am a sun newbie (just bought my first solaris book this week so the more dummied down answer would be the best one for me). if it can be done could you give me the exact process.
    thanks a million (and one).

    The Sun network installer scripts only work on Solaris. So there's no instructions from Sun for configuring the daemons on Linux necessary to do the configuration.
    There are some guides on the net, but I don't know of one that tells the whole story.
    You might consider installing Solaris in a VM on the linux box, then configuring jumpstart on that. You could then see how the daemons on it are configured and replicate that configuration on the Linux machine.
    Darren

  • Installing Solaris 9 on HP ML350 G5 server - No disks found

    Some weeks ago I've post a topic about problem with installing Solaris 10 on HP ML350 G5 server.
    ( [http://forum.java.sun.com/thread.jspa?threadID=5308827] )
    OK, it have been solved. Thanks!
    But now I need to install Solaris 9 on this server. The problem is same - No disks found.
    I can't find drivers for Smart Array e200i 128Mb v.1.66 (disk controller installed on ML350 G5) for Solaris 9.
    Can you help me? Thanks in advance.

    Find a contact e-mail address on HP's website and ask them if the driver is available for Solaris 9.
    alan

  • Installing Solaris 10 on HP ML350 G5 server - No disks found

    I get no disks found.
    I cant find drivers for Smart Array e200i 128Mb v.1.66 (disk controller installed on ML350 G5) on HP site or anywhere else.
    Has anyone had success in installing Solaris on ML350 G5 server?
    Help me, please!

    Common problem. The HP storage controller driver, cpqary3, is not included in the Solaris 10 install media.
    [Download it here|http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121486&swItem=MTX-2eef9b53d2194136a514218995&prodNameId=3288144&swEnvOID=2023&swLang=8&taskId=135&mode=4&idx=2]
    One of the files included in the bundle is a .iso, which you'll need to burn to a CD. Then, when the installer gets to the first menu, select "Apply driver updates" and insert the cpqary3 CD. After the installer has loaded the drivers into the running kernel, pop the driver media out and re-insert the Solaris install media. Continue as normal.

  • How to install Solaris 5.9 in existing Solaris 5.10 Sun v440 server

    Hi All,
    Solaris 5.10 is installed one of my system, i need to install Solaris 5.9 also on the same machine so how can i install the solaris 5.9 on my running server(Solaris 5.10). I have also word with HCL they told me take support from
    sun.Actuall this is concept of LDOM. So need a help how can i prepare LDOM give me the solution.
    Regards,
    Sushil Yadav

    Hi
    Look here
    http://www.sun.com/software/solaris/containers/index.jsp
    (was my 1st hit with google using "solaris 9 zones").
    Paul

  • Installing Solaris 11 on SunFIre T1000 With Automated Installer Server Fail

    h4. Hi
    h4. A few days i am try to intall solaris 11 11/11 on our server Sunfire T1000
    h4. we first upgrade the firmware of the server to
    sc> showhost
    Sun-Fire-T1000 System Firmware 6.7.12 2011/07/06 20:03
    Host flash versions:
    OBP 4.30.4.d 2011/07/06 14:27
    Hypervisor 1.7.3.c 2010/07/09 15:14
    POST 4.30.4.b 2010/07/09 14:25
    h4. And after we install Solaris 11 x86 on a laptop, in that we configure an AIS (Automated installer Server)
    installadm list
    Service Name Alias Of Status Arch Image Path
    default-sparc s11-sparc on Sparc /install/images/s11-sparc
    s11-sparc - on Sparc /install/images/s11-sparc
    h4. We are using the default installations with a DHCP server in the Laptop
    installadm list -m -p
    Service Name Manifest Status
    default-sparc orig_default Default
    s11-sparc orig_default Default
    h4. By the other side, in the sparc server (T1000) we use OBP for a WAN Boot Installation
    boot net:dhcp - installl
    2012-08-08 20:33:44,911 InstallationLogger DEBUG Starting Automated Installation
    2012-08-08 20:33:44,913 InstallationLogger INFO Using XML Manifest: /system/volatile/ai.xml
    2012-08-08 20:33:44,965 InstallationLogger INFO Using profile specification: /system/volatile/profile
    2012-08-08 20:33:45,018 InstallationLogger INFO Using service list file: /var/run/service_list
    2012-08-08 20:33:45,070 InstallationLogger INFO Starting installation.
    2012-08-08 20:33:45,122 InstallationLogger DEBUG Registering Manifest Parser Checkpoint
    2012-08-08 20:33:45,124 InstallationLogger DEBUG Engine registering:
    2012-08-08 20:33:45,126 InstallationLogger DEBUG name: manifest-parser
    2012-08-08 20:33:45,128 InstallationLogger DEBUG module_path: solaris_install.manifest.parser
    2012-08-08 20:33:45,129 InstallationLogger DEBUG checkpoint_class_name: ManifestParser
    2012-08-08 20:33:45,131 InstallationLogger DEBUG args: None
    2012-08-08 20:33:45,133 InstallationLogger DEBUG kwargs: {'call_xinclude': True, 'manifest': '/system/volatile/ai.xml', 'validate_from_docinfo': True}
    2012-08-08 20:33:45,135 InstallationLogger DEBUG insert_before: None
    2012-08-08 20:33:45,136 InstallationLogger DEBUG log_level: None
    2012-08-08 20:33:45,138 InstallationLogger DEBUG =============================
    2012-08-08 20:33:45,142 InstallationLogger DEBUG Current checkpoint list:
    2012-08-08 20:33:45,144 InstallationLogger DEBUG      manifest-parser
    2012-08-08 20:33:45,146 InstallationLogger DEBUG Executing Manifest Parser Checkpoint
    2012-08-08 20:33:45,148 InstallationLogger DEBUG Retrieving checkpoint list from manifest-parser to None+
    2012-08-08 20:33:45,150 InstallationLogger DEBUG Executing Engine Checkpoints...+
    2012-08-08 20:33:45,152 InstallationLogger DEBUG Retrieving checkpoint list from manifest-parser to None+
    2012-08-08 20:33:45,154 InstallationLogger DEBUG Engine will be executing following checkpoints:+
    2012-08-08 20:33:45,155 InstallationLogger DEBUG      manifest-parser
    2012-08-08 20:33:45,157 InstallationLogger DEBUG Spawning InstallEngine execution thread
    2012-08-08 20:33:45,160 InstallationLogger DEBUG Loading manifest-parser checkpoint
    2012-08-08 20:33:45,213 InstallationLogger.manifest-parser DEBUG Initializing ManifestParser (manifest=/system/volatile/ai.xml, Validate_from_docinfo=True, dtd_file=None, load_defaults=True, call_xinclude=True)
    2012-08-08 20:33:45,273 InstallationLogger DEBUG manifest-parser: prog est-1, prog ratio-0.95, total_ratio-1.00
    2012-08-08 20:33:45,275 InstallationLogger DEBUG Last checkpoint, manifest-parser: prog ratio 0.95
    2012-08-08 20:33:45,279 InstallationLogger DEBUG Snapshotting DOC to /var/run/install_engine/engine.MYk67H/.data_cache.manifest-parser
    2012-08-08 20:33:45,286 InstallationLogger DEBUG Executing manifest-parser checkpoint
    2012-08-08 20:33:45,288 InstallationLogger.manifest-parser DEBUG ManifestParser.execute(dry_run=False) called
    2012-08-08 20:33:45,290 InstallationLogger.manifest-parser DEBUG ManifestParser.parse(doc=-> [DataObjectCache] (<solaris_install.data_object.cache.DataObjectCache object at 0xee1b90>)
         -> [persistent] (DataObjectCacheChild: persistent)
              -> [auto-install] (<solaris_install.ApplicationData object at 0xee1030>)
         -> [volatile] (DataObjectCacheChild: volatile)
              -> [apply_sysconfig_dict] (<solaris_install.data_object.data_dict.DataObjectDict object at 0xee1050>)) called
    2012-08-08 20:33:45,292 InstallationLogger.manifest-parser DEBUG loading manifest (dtd_validation=True)
    2012-08-08 20:33:45,872 InstallationLogger.manifest-parser DEBUG Parsed XML document:
    <!DOCTYPE auto_install SYSTEM "file:///usr/share/install/ai.dtd.1">
    <auto_install>
    <ai_instance name="orig_default" auto_reboot="false">
    <target>
    <logical noswap="false" nodump="false">
    <zpool name="rpool" is_root="true" action="create">
    <filesystem name="export" mountpoint="/export" action="create" in_be="false"/>
    <filesystem name="export/home" action="create" in_be="false"/>
    <be name="solaris"/>
    </zpool>
    </logical>
    </target>
    <software type="IPS">
    <destination>
    <image action="create" index="false">
    <!-- Specify locales to install -->
    <facet set="false">facet.locale.*</facet>
    <facet set="true">facet.locale.en</facet>
    <facet set="true">facet.locale.en_US</facet>
    <facet set="true">facet.locale.es</facet>
    <facet set="true">facet.locale.es_ES</facet>
    </image>
    </destination>
    <source>
    <publisher name="solaris">
    <origin name="http://pkg.oracle.com/solaris/release"/>
    </publisher>
    </source>
    h4. When the installation precess is in this part
    13% target-selection completed.
    17% ai-configuration completed.
    19% target-instantiation completed.
    19% Beginning IPS transfer
    Creating IPS image
    Installing packages from:
    solaris
    origin: http://pkg.example.com/solaris/
    h4. in the install_log file show us this errors:
    2012-08-08 20:51:39,653 InstallationLogger.generated-transfer-1184-1 DEBUG Download: text/doctools ...
    2012-08-08 20:51:43,156 InstallationLogger.generated-transfer-1184-1 DEBUG Download: system/core-os ...
    2012-08-08 20:52:03,704 InstallationLogger.generated-transfer-1184-1 DEBUG Download: text/less ...
    2012-08-08 20:52:03,788 InstallationLogger.generated-transfer-1184-1 DEBUG Download: system/management/rad/module/rad-smf ...
    2012-08-08 20:52:03,835 InstallationLogger.generated-transfer-1184-1 DEBUG Download: system/library ...
    2012-08-08 20:52:30,609 InstallationLogger.generated-transfer-1184-1 DEBUG Cleaning up
    2012-08-08 20:52:30,611 InstallationLogger ERROR Error occurred during execution of 'generated-transfer-1184-1' checkpoint.
    Traceback (most recent call last):
    File "/usr/lib/python2.6/vendor-packages/solaris_install/engine/__init__.py", line 811, in executecheckpoints
    checkpoint.execute(dry_run)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/transfer/ips.py", line 359, in execute
    self._transfer()
    File "/usr/lib/python2.6/vendor-packages/solaris_install/transfer/ips.py", line 639, in _transfer
    self.api_inst.prepare()
    File "/usr/lib/python2.6/vendor-packages/pkg/client/api.py", line 2021, in prepare
    self._img.imageplan.preexecute()
    File "/usr/lib/python2.6/vendor-packages/pkg/client/imageplan.py", line 2827, in preexecute
    p.download()
    File "/usr/lib/python2.6/vendor-packages/pkg/client/pkgplan.py", line 406, in download
    mfile.wait_files()
    File "/usr/lib/python2.6/vendor-packages/pkg/client/transport/transport.py", line 2857, in wait_files
    self._transport._get_files(self)
    File "/usr/lib/python2.6/vendor-packages/pkg/client/transport/transport.py", line 432, in wrapper
    return f(instance, fargs, *f_kwargs)
    File "/usr/lib/python2.6/vendor-packages/pkg/client/transport/transport.py", line 1736, in getfiles
    self._get_files_list(mfile, filelist)
    File "/usr/lib/python2.6/vendor-packages/pkg/client/transport/transport.py", line 1685, in getfiles_list
    raise tfailurex
    TransportFailures: 1: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 7558caebcb4a599c08c6a1b1591672f2b3b3cb06.
    2: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: c8edd4ff7e100c83ad74ba75a9baeda47348800c.
    3: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 91350cb5e1dc88dbbcf2e94e0a05b075f03ba35b.
    4: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 85bec186fd71c8a072cb3261aac5a2d26e0bed01.
    5: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: feaf36a0752e78974e4cdbd757a2af9dd5f94236.
    6: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 93adf874561a2c2e383fa55da1f23cc93f1b24b5.
    7: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 5c261f9705a8c604bf3f473f1d76c7f646cedc60.
    8: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 81fa4733fa459a553001f8fdf30f49e35067a5ea.
    2012-08-08 20:52:30,731 InstallationLogger DEBUG Checkpoints Completed: DOC:+
    -> [DataObjectCache] (<solaris_install.data_object.cache.DataObjectCache object at 0xee1b90>)+
         -> [persistent] (DataObjectCacheChild: persistent)+
              -> [auto-install] (<solaris_install.ApplicationData object at 0xee1030>)+
              -> [Engine-DOC-Root-Node] (<solaris_install.engine.EngineData object at 0xecc930>)+
                   -> [manifest-parser] (<solaris_install.engine.checkpoint_data.CheckpointRegistrationData object at 0xee10d0>)+
                   -> [target-discovery] (<solaris_install.engine.checkpoint_data.CheckpointRegistrationData object at 0xee1230>)+
                   -> [target-selection] (<solaris_install.engine.checkpoint_data.CheckpointRegistrationData object at 0xee12f0>)+
                   -> [ai-configuration] (<solaris_install.engine.checkpoint_data.CheckpointRegistrationData object at 0xee1410>)+
                   -> [var-shared-dataset] (<solaris_install.engine.checkpoint_data.CheckpointRegistrationData object at 0xee1c30>)+
                   -> [target-instantiation] (<solaris_install.engine.checkpoint_data.CheckpointRegistrationData object at 0xee1750>)+
              -> [discovered] (<solaris_install.target.Target object at 0xee1330>)+
                   -> [disk] (Disk: ctd=c2t0d0; volid=None; devpath=/pci@7c0/pci@0/pci@8/scsi@2/sd@0,0; devid=id1,sd@n5000cca334c724bf; prop:dev_type=scsi; prop:dev_vendor=HITACHI; prop:dev_size=148.99gb; keyword: key=boot_disk; is_cdrom=False; label=VTOC; whole_disk=False; write_cache=False)+
                        -> [0] (Slice: name=0; action=preserve, force=False, is_swap=False, tag=2, flag=0, in_use={'used_by': ['exported_zpool'], 'used_name': ['rpool']}; size=148.99gb; start_sector=4768)+
                        -> [2] (Slice: name=2; action=preserve, force=False, is_swap=False, tag=5, flag=1; size=148.99gb; start_sector=0)+
                   -> [logical] (Logical: noswap=True; nodump=True)+
              -> [desired] (<solaris_install.target.Target object at 0xede3f0>)+
                   -> [logical] (Logical: noswap=False; nodump=False)+
                        -> [rpool] (Zpool: name=rpool; action=create; is_root=True; vdev_list=['c2t0d0s0'])+
                             -> [export] (Filesystem: name=export; action=create; mountpoint=/export)+
                             -> [export/home] (Filesystem: name=export/home; action=create)+
                             -> [solaris] (BE: name=solaris; mountpoint=/a)+
                             -> [vdev] (Vdev: name=vdev; redundancy=none)+
                             -> [swap] (Zvol: name=swap; action=create; use=swap; size=1024m)+
                             -> [dump] (Zvol: name=dump; action=create; use=dump; size=512m)+
                             -> [var] (Filesystem: name=var; action=create; mountpoint=/var)+
                   -> [disk] (Disk: ctd=c2t0d0; volid=None; devpath=/pci@7c0/pci@0/pci@8/scsi@2/sd@0,0; devid=id1,sd@n5000cca334c724bf; prop:dev_type=scsi; prop:dev_vendor=HITACHI; prop:dev_size=148.99gb; keyword: key=boot_disk; is_cdrom=False; label=VTOC; whole_disk=False; write_cache=True)+
                        -> [0] (Slice: name=0; action=create, force=True, is_swap=False, tag=2, flag=0; in_zpool=rpool; in_vdev=vdev; size=148.99gb; start_sector=4768)+
         -> [volatile] (DataObjectCacheChild: volatile)+
              -> [apply_sysconfig_dict] (<solaris_install.data_object.data_dict.DataObjectDict object at 0xee1050>)+
              -> [orig_default] (ai_instance: name='orig_default' auto_reboot=False; http_proxy='None')+
                   -> [target] (<solaris_install.target.Target object at 0xee1d30>)+
                        -> [logical] (Logical: noswap=False; nodump=False)+
                             -> [rpool] (Zpool: name=rpool; action=create; is_root=True; vdev_list=[None])+
                                  -> [export] (Filesystem: name=export; action=create; mountpoint=/export)+
                                  -> [export/home] (Filesystem: name=export/home; action=create)+
                                  -> [solaris] (BE: name=solaris)+
                   -> [generated-transfer-1184-1] (<solaris_install.transfer.info.Software object at 0xee1f30>)+
                        -> [transfer] (<solaris_install.transfer.info.IPSSpec object at 0xecc050>)+
                        -> [destination] (<solaris_install.transfer.info.Destination object at 0xecc0b0>)+
                             -> [image] (<solaris_install.transfer.info.Image object at 0xecc130>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc150>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc1b0>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc210>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc270>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc2d0>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc330>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc390>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc3f0>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc450>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc4b0>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc510>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc570>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc5d0>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc630>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc690>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc6f0>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc750>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc7b0>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc810>)+
                                  -> [facet] (<solaris_install.transfer.info.Facet object at 0xecc870>)+
                                  -> [img_type] (<solaris_install.transfer.info.ImType object at 0xee1b70>)+
                        -> [source] (<solaris_install.transfer.info.Source object at 0xecc8b0>)+
                             -> [publisher] (<solaris_install.transfer.info.Publisher object at 0xecc8f0>)+
                                  -> [origin] (<solaris_install.transfer.info.Origin object at 0xecc910>)+
              -> [transfer-zpool-cache] (<solaris_install.data_object.data_dict.DataObjectDict object at 0xee18f0>)+
              -> [transfer-ai-files] (<solaris_install.data_object.data_dict.DataObjectDict object at 0xee15b0>)+
    2012-08-08 20:52:30,747 InstallationLogger DEBUG Checkpoints Completed: DOC (xml_format):
    <root>
    <target name="discovered">
    <disk whole_disk="false">
    <disk_name name="c2t0d0" name_type="ctd"/>
    <disk_prop dev_type="scsi" dev_vendor="HITACHI" dev_size="312461344secs"/>
    <disk_keyword key="boot_disk"/>
    <slice name="0" action="preserve" force="false" is_swap="false">
    <size val="312456576secs" start_sector="4768"/>
    </slice>
    <slice name="2" action="preserve" force="false" is_swap="false">
    <size val="312461344secs" start_sector="0"/>
    </slice>
    </disk>
    <logical noswap="true" nodump="true"/>+
    </target>+
    <target name="desired">+
    <logical noswap="false" nodump="false">+
    <zpool name="rpool" action="create" is_root="true">+
    <filesystem name="export" action="create" mountpoint="/export" in_be="false"/>+
    <filesystem name="export/home" action="create" in_be="false"/>+
    <be name="solaris"/>+
    <vdev name="vdev" redundancy="none"/>+
    <zvol name="swap" action="create" use="swap">+
    <size val="1024m"/>+
    </zvol>+
    <zvol name="dump" action="create" use="dump">+
    <size val="512m"/>+
    </zvol>+
    <filesystem name="var" action="create" mountpoint="/var" in_be="true"/>+
    </zpool>+
    </logical>+
    <disk whole_disk="false">+
    <disk_name name="c2t0d0" name_type="ctd"/>+
    <disk_prop dev_type="scsi" dev_vendor="HITACHI" dev_size="312461344secs"/>+
    <disk_keyword key="boot_disk"/>+
    <slice name="0" action="create" force="true" is_swap="false" in_zpool="rpool" in_vdev="vdev">+
    <size val="312456576secs" start_sector="4768"/>+
    </slice>+
    </disk>+
    </target>+
    <ai_instance auto_reboot="false" name="orig_default">+
    <target>+
    <logical noswap="false" nodump="false">+
    <zpool name="rpool" action="create" is_root="true">+
    <filesystem name="export" action="create" mountpoint="/export" in_be="false"/>+
    <filesystem name="export/home" action="create" in_be="false"/>+
    <be name="solaris"/>+
    </zpool>+
    </logical>+
    </target>+
    <software name="generated-transfer-1184-1" type="IPS">+
    <software_data>+
    <name>pkg:/entire@latest</name>+
    <name>pkg:/group/system/solaris-large-server</name>+
    </software_data>
    <destination>
    <image img_root="/a" action="create" index="False">
    <facet set="false">facet.locale.*</facet>
    <facet set="true">facet.locale.en</facet>
    <facet set="true">facet.locale.en_US</facet>
    <facet set="true">facet.locale.es</facet>
    <facet set="true">facet.locale.es_ES</facet>
    </image>
    </destination>
    <source>
    <publisher name="solaris">
    <origin name="http://pkg.oracle.com/solaris/release"/>
    </publisher>
    </source>
    </software>
    </ai_instance>
    </root>
    2012-08-08 20:52:30,749 InstallationLogger CRITICAL Failed Checkpoints:
    2012-08-08 20:52:30,803 InstallationLogger ERROR
    2012-08-08 20:52:30,855 InstallationLogger ERROR generated-transfer-1184-1
    2012-08-08 20:52:30,907 InstallationLogger ERROR
    2012-08-08 20:52:30,960 InstallationLogger ERROR Checkpoint execution error:
    2012-08-08 20:52:31,012 InstallationLogger ERROR
    2012-08-08 20:52:31,064 InstallationLogger ERROR 1: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 7558caebcb4a599c08c6a1b1591672f2b3b3cb06.
    2012-08-08 20:52:31,117 InstallationLogger ERROR 2: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: c8edd4ff7e100c83ad74ba75a9baeda47348800c.
    2012-08-08 20:52:31,169 InstallationLogger ERROR 3: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 91350cb5e1dc88dbbcf2e94e0a05b075f03ba35b.
    2012-08-08 20:52:31,222 InstallationLogger ERROR 4: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 85bec186fd71c8a072cb3261aac5a2d26e0bed01.
    2012-08-08 20:52:31,274 InstallationLogger ERROR 5: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: feaf36a0752e78974e4cdbd757a2af9dd5f94236.
    2012-08-08 20:52:31,326 InstallationLogger ERROR 6: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 93adf874561a2c2e383fa55da1f23cc93f1b24b5.
    2012-08-08 20:52:31,379 InstallationLogger ERROR 7: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 5c261f9705a8c604bf3f473f1d76c7f646cedc60.
    2012-08-08 20:52:31,431 InstallationLogger ERROR 8: Invalid contentpath usr/share/man/man3dlpi/dlpi_send.3dlpi: chash failure: expected: 74354376b4382a6ccdc566157c6ad82892aa0679 computed: 81fa4733fa459a553001f8fdf30f49e35067a5ea.
    2012-08-08 20:52:31,484 InstallationLogger ERROR
    2012-08-08 20:52:31,536 InstallationLogger INFO Automated Installation Failed. See install log at /system/volatile/install_log
    2012-08-08 20:52:31,588 InstallationLogger DEBUG Shutting down Progress Handler
    h4. Is something about:
    2012-08-08 20:52:30,611 InstallationLogger ERROR Error occurred during execution of 'generated-transfer-1184-1' checkpoint.
    Traceback (most recent call last):
    File "/usr/lib/python2.6/vendor-packages/solaris_install/engine/__init__.py", line 811, in executecheckpoints
    checkpoint.execute(dry_run)
    2012-08-08 20:52:30,749 InstallationLogger CRITICAL Failed Checkpoints:
    2012-08-08 20:52:30,803 InstallationLogger ERROR
    2012-08-08 20:52:30,855 InstallationLogger ERROR generated-transfer-1184-1
    2012-08-08 20:52:30,907 InstallationLogger ERROR
    2012-08-08 20:52:30,960 InstallationLogger ERROR Checkpoint execution error:
    h4. Somebody knows about this error?

    The chash failures indicate that either the repository you're using has corrupt content for those files, or the files are being corrupted on download. The latter is more likely, usually a result of badly-behaved http proxies.

  • Installing Solaris 9 and Solaris 10 using one JumpStart server

    Hi All,
    Is there any possibility to install both Solaris 9 and Solaris 10 using only one JumpStart server?
    Also it could be performed using flash archives?
    Thanks in andvice,
    Daniel

    Actually I do not understand how it will work
    together.
    Maybe I will describe my point of view.
    I have Solaris 10 with JumpStart server which is
    configured and works fine.
    So the next step to have Solaris 9 installation is:
    * copy Solaris 9 OS boot and installation image to
    the local disk using setup_install_server
    Q: If this script fails what to do?setup_install_server should work fine unless you're installing on a ZFS filesystem. Part of the script is checking for sufficient disk space. I think the script may not work properly in all situations with ZFS.
    * run add_install_client script from the Solaris 9
    installation directory
    Q: do I need to do any other changes?Nope. Assuming you're already running tftp for the Solaris 10 stuff, nothing has to be enabled.
    So I have two OS on the JumpStart server that I can
    choose to install.Yes.
    JumpStart is configured to install Solaris 10. If I
    would like to install Solaris 9 on the same machine
    should I only run add_install_client script from the
    Solaris 9 installation directory?If everything works right, that should remove the older entry from the bootparams database and the machine will jumpstart with Solaris 9.
    Darren

  • Mistake installing solaris 10 in server Sun Sparc Entreprise 220r

    Hello I am installing solaris 10 in a server Sun Sparc Enterprise220r, it starts with CD1 and the following mistake appears:
    THE FILE JUST LOADED DOES NOT APPEAR TO BE EXECITABLE

    Perhaps instead of opening a new post, you might have just continued your original thread from a few days ago. It seems to be the same issue - bad burn of the optical media.
    http://forum.java.sun.com/thread.jspa?threadID=5229606
    Generic instructions for downloading and creating your installation media is here:
    http://www.sun.com/software/solaris/download_instruction.xml

  • Solaris 8 on Intel STL2 server board - installation problem

    Hi,
    I try to install Solaris 8 (4/01) on Intel STL2 server board (P III 866 MHz, SDRAM 512 ECC Reg, Adaptec AIC7899 Dual Channel-one Ultra160/LVD channel, Intel PRO/100+ Fast Ethernet Controller, ATI Rage* IIC SVGA) - without success.
    It recognizes all devices but after I choose Solaris Interactive installation (from CD labeled Solaris 8 Software 1 of 2 Intel Platform Edition) it displays:
    Booting kernel/unix...
    SunOS Release 5.8 Version...
    then reboots after 2 seconds.
    Since Intel STL2 board appears in the HCL for Solaris 8 I have struggled a while with the problem. I have not found neither post nor driver update information concerning this issue on the Solaris' related Web sites.
    Finally, I found the very strange specification update info of STL2 board, published by Intel:
    "13. Sun* Solaris* 8 installation issues
    PROBLEM: Sun Solaris 8 cannot be installed on the STL2 server board with any BIOS version later than BIOS Release 1.1, Build 15. The system reboots during install and therefore the installation cannot be completed.
    IMPLICATION: Installation of Sun Solaris 8 cannot be completed on an STL2 server board running any BIOS release later than BIOS Release 1.1, Build 15.
    WORKAROUND: Sun Solaris* 8 will successfully install on the STL2 server board with BIOS Release 1.1, Build 15."
    My BIOS release on the STL2 board is 1.7. It's too new to install Solaris 8 !?!
    I am unable to get an old STL2 model with BIOS 1.1. Is there a way to update anything in the Solaris 8 in order to set it up on the new model of Intel STL2 server platform?
    I would appreciate any help. Thanks.
    Matt

    The problem has been resolved.
    I got the older BIOS 1.1 Build 15 for Intel STL2 from Intel Internet Support. After I installed BIOS 1.1 instead of BIOS 1.7 had no problem with installation of Solaris 8.
    Matt

  • Installation problem with Solaris 2.6 on E220R server

    Dear Sir/Madam,
    I got the problem to install Solaris 2.6 on the new E220R server and
    would appreciate if someone can give me some hint/trick how to fix it.
    Firsly I boot the machine using the OPERATING ENVIRONMENT INSTALLATION
    CD and then selected Solaris 2.6 and from there I used the Solaris 2.6
    CD to install.
    The installation went OK however after reboot the OS complained that it
    could NOT open the "kernel/unix".
    Please send me a copy of your answer to
    [email protected]
    Thanks in advance,
    Trung Nguyen

    The response is "/platform/sun4u/kernel/unix".
    You will be asked another question, but you can just hit enter in response.
    Of course, this solution begs the issue of why it happens in the first place.

Maybe you are looking for

  • Iphone 5 screen size , does not expand

    when watching video's etc , it dose'nt expand to full size screen . Some new apps for iphone 5 fill the screen , but old apps don't . Will Apple be updating this issue ? .......... Phil

  • What external hard drives for backup are compatible with Yosemite?

    I have an early 2013 MBP Retina 15" and have installed Yosemite. I want to purchase an external hard drive for backup via Time Machine. I have read that Western Digital drives were associated with data loss with Mavericks; I do not know if that has b

  • CMDTUX_CAT:465: ERROR: Failed to abort old transactions

    Can anyone please tell me what is this error upto : CMDTUX_CAT:465: ERROR: Failed to abort old transactions Mu ULOG is logged with the following log: TMS_ORA.656.1.0: 08-12-2008: Tuxedo Version 9.1, 32-bit TMS_ORA.656.1.0: LIBTUX_CAT:262: INFO: Stand

  • Windows 7: Error-12 Installation

     Hello, I am having difficulties installing Academic Site License Spring 2009 LabVIEW Core on a Windows 7 Enterprise 32-Bit Operating System. We are using this deployment of LabVIEW for approximately 310 computer systems. I am testing out the install

  • My 2 Project Siena Apps listed as New and Rising in Windows Store

    Hmmn, my two latest Project  Siena apps, GOES Satellite Imagery and Doppler Radar Mosaic Imagery are  listed as new and rising with some heavyweight products like BBC and Weather Channel. I must be hallucinating. I have no idea what being listed with