Installing Solaris 7 - timeout waiting for ARP/RARP packet
I'm attempting to install Solaris 7 on and E250. I'm using HyperTerminal connection via a null modem cable. I boot up the server and I see various harware init processes echoed to the terminal and then I receive this error: Timeout waiting for ARP/RARP packet
I have connected the nic card to a network connection.
any help would be appreciated.
Steve
This is because you HAVE a network connection. You can resolve this with 1 of the following 2 methods:
A:
disconnect the network cable and reconnect when the installation process gets to the prompt for hostname.
B:
1. Get to the OK prompt
2. setenv diag-device disk
3. reset
Similar Messages
-
Timeout waiting for ARP/RARP packets
I am installing Solaris 8 for the first time on an Ultra 5. It has a network card and attached to my 10mbps Hub which is connected to Cable Modem. Problem: While the system was rebooting after the install, the system generated the error trying to link up to the Hub (timeout waiting for ARP/RARP packets). During the install I chose "non-networked" because I could not answer the other questions such IP address name Service etc..
I want to set it up as a server so that I can use 2 other PCs to access the Oracle, mail and other stuff that would eventually run on it.
What do I do?
RenaldTypically the message "waiting for ARP/RARP packet" will only be generated when no other boot device is available or net is set as the primary boot device. First thing to do is check your env settings to ensure that boot-device = disk net. Second, to reenable network support to the system the easiest way is to do a sys-unconfig and enter the requested information. You need to have the following information available. Hostname, IP address, subnet mask, Name service (if any), Name service settings (name and IP address of server). Some of the information may be available from your ISP on what exact address`s you should be using. Since the message came up and if the boot-device setting is correct I would check the connection to the hard disk.
Lane -
Timeout waiting for ARP/RARP packet
Does anyone know how to get to the ok prompt when the message, Timeout waiting for ARP/RARP packet is repeating over and over on the screen. I tried hitting stop + a but there was no response. Could this be a problem with my keyboard. Are there any other ways to to stop the message, Timeout waiting for ARP/RARP packet and get to the ok prompt? Thank you.
Hi
You have not indicated if you are using a Framebuffer
card/Monitor and Sun keyboard as the console or a Serial port for the same.
If using Sun keyboard, switch off the system, hold the
stop and N keys together and poweron the system. Hold
the keys down till you get the display. A stop + A then surely should take you to OK prompt since Stop and N reset the OK prompt to factory default.
If using a serial port as console, try " Cntrl + Break". That should do it...
HTH
Shridhar -
Timeout waiting for ARP/RARP stack underflow
My U60 running solaris 10 crashed, and all I see on the screen is this:
Timeout waiting for ARP/RARP stack underflow
What does it mean?Looks like its trying to boot from the network, gets an IP address but then fails loading its kernel from tftp..
Break it and try "boot disk" from the OBP.
7/M. -
Adobe Pro XI install: Timeout waiting for window to load
Installed fine on my work computer yesterday (subscription). Trying to download and install at home from the website and getting "Timeout waiting for window to load". I've tried IE, Chrome and Firefox. I do have a Pro 8 installed here, but don't want to chuck it until I know XI is going to install - not sure I know where that disk is any longer.
Hi Daniel,
Seems to be a network issue here.
Please try downloading the file ( Download Acrobat products | 9, 8 ) from any other network, (may be your work computer network) and save the setup file to a flash drive.
Connect the flash drive to the home computer and try installing.
Regards,
Rave -
Help with flex4unit ant build.xml: Socket timeout waiting for flexunit report
I'm having trouble setting up ant to build and test my project locally and I'm not sure what the next step is.
Info:
Running on XP/Cygwin.
All of the files that FlexUnit4 references when used in Flash Builder are in my '${basename}/libs' folder (eg FlexUnit4_1.0.swc).
I've placed the flexunit4 task in my ant/libs folder.
I'm getting two errors...
I don't think I've set up the 'socket' stuff right for the tests. It just sits and waits then dies...
[flexunit] Waiting for client connection ...
(about a minute later)
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
BUILD FAILED
java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
Plus this is the error I get from the flash player:
ReferenceError: Error #1065: Variable mx.skins.spark::BorderSkin is not defined.
I don't know why it's complaining about Borderskin as I think I have included all the flex4 libs I could find. I suspect this second error is causing the first error?
Any help appreciated. I think I'm just setting it up all wrong.
Screencap of errors:
http://twitpic.com/l7ay8
build.xml:
http://gist.github.com/20804Finally got everything working using the files from the CI Example which what i probably should have done in the first place.
So a rough guide for anyone just starting out with this:
Download the Flex 4 'workspace' from the digital primates hudson server . This appears to contain flexunit library and examples in various stages of development.
I used Flex Builder 4 Beta 2 to set up my Test Suite and Test Cases.
I then loaded the libs folder from:
workspace.zip\workspace\project\FlexUnit4SampleCIProject
into my flex project's libs folder:
this includes:
FlexUnit4.swc
FlexUnit4CIListener.swc
flexUnit4UIRunner.swc
flexTasks.jar
flexUnitTasks.jar
I didn't need to remove the FlexUnit4 stuff that is 'referenced' automatically by flash builder when you start adding flexunit4 tests/suites.
Then I used a modified version of the TestRunner.mxml found in:
workspace.zip\workspace\project\FlexUnit4SampleCIProject\src\test\flex
The lines to pay attention to are the ones that look like:
static public function currentRunTestSuite():Array {
var testsToRun:Array = new Array();
testsToRun.push(packagename.TestSuiteName);
testsToRun.push(packagename.TestClassName);
return testsToRun;
Just make sure you update this list to include all of the test suites &/or individual tests you want to run.
I made this a static function and modified the code in the "FlexUnitApplication.mxml" file to use this function so i'd only need to update one list of suites/tests.
FlexUnitApplication.mxml is generated automatically when you run FlexUnit4 tests in the Flash Builder 4 Beta 2 IDE.
This is the build.xml file I'm using in the project:
http://gist.github.com/208211
Change the name of the project from "Flare" to whatever and adjust the other path settings where required (though you might want to write this from scratch at least once so you understand roughly what is going on).
The Debug Flash Player must be installed on the server otherwise you'll get a:
java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
...while it waits for the non-existant debugger to attach. (This is obvious but I did forget and was a bit bewildered for a moment)
Need to also ensure the environment variable:FLEX_HOME is set to the location you installed the flex sdk...by editing your .bashrc setting the environment variable the in the Hudson Configuration.
You'll need to point Hudson at your ant installation and your jdk installation. If you downloaded he sdk, be aware you might need to point it to the jdk folder inside the place you installed the sdk.
And I think that's all the problems I had. Hope it's useful to someone... if anyone who actually knows what they are doing can point out any potential issues/better ways of doing things, feel free to comment.
Thanks to Brian (legrosb) and Mike (mlabriola) for their assistance! -
451 4.7.0 Timeout waiting for client input
My organization is running Small Business Server 2008 with Exchange. After installing Exchange users reported not reciveing emails from Comcast and a few other domains. Looking at the logs, domains including gmail and comcast are unable to deliver email to our Exchange mailboxes. They receive an error message like the following.
Technical details of temporary failure:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 451 451 4.7.0 Timeout waiting for client input (state 18).
Other domains send just fine. Any ideas what is causing the 451 4.7.0 connection timeout error message? The following is an example SMTPReceive log.
2009-06-08T23:15:11.964Z,,+,,
2009-06-08T23:15:11.964Z,,SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders,Set Session Permissions
2009-06-08T23:15:11.964Z,,"220 remote.domain.com Microsoft ESMTP MAIL Service ready at Mon, 8 Jun 2009 16:15:11 -0700",
2009-06-08T23:15:12.027Z,,<,EHLO smtp3.mail.com,
2009-06-08T23:15:12.027Z,,250-remote.domain.com Hello [123.12.123.123],
2009-06-08T23:15:12.027Z,,250-SIZE 10485760,
2009-06-08T23:15:12.027Z,,250-PIPELINING,
2009-06-08T23:15:12.027Z,,>,250-DSN,
2009-06-08T23:15:12.027Z,,>,250-ENHANCEDSTATUSCODES,
2009-06-08T23:15:12.027Z,,>,250-STARTTLS,
2009-06-08T23:15:12.027Z,,>,250-AUTH,
2009-06-08T23:15:12.027Z,,>,250-8BITMIME,
2009-06-08T23:15:12.027Z,,>,250-BINARYMIME,
2009-06-08T23:15:12.027Z,,>,250 CHUNKING,
2009-06-08T23:15:12.105Z,,<,STARTTLS,
2009-06-08T23:15:12.105Z,,>,220 2.0.0 SMTP server ready,
2009-06-08T23:15:12.105Z,,*,,Sending certificate
2009-06-08T23:15:12.105Z,,*,CN=remote.domain.com,Certificate subject
2009-06-08T23:15:12.105Z,,*,CN=ecf-DOMAINSERVER-CA,Certificate issuer name
2009-06-08T23:15:12.105Z,,*,,Certificate serial number
2009-06-08T23:15:12.105Z,DOMAIN\Windows SBS Internet Receive DOMAIN,,20,,*,,Certificate thumbprint
2009-06-08T23:15:12.105Z,DOMAIN\Windows SBS Internet Receive DOMAIN,,21,,,*,remote.domain.com;domain.com;DOMAIN.local,Certificate alternate names
2009-06-08T23:15:12.355Z,,EHLO smtp3.mail.com,
2009-06-08T23:15:12.355Z,,250-remote.domain.com Hello [123.12.123.123],
2009-06-08T23:15:12.355Z,,250-SIZE 10485760,
2009-06-08T23:15:12.355Z,,250-PIPELINING,
2009-06-08T23:15:12.355Z,,250-DSN,
2009-06-08T23:15:12.355Z,,250-ENHANCEDSTATUSCODES,
2009-06-08T23:15:12.355Z,,250-AUTH,
2009-06-08T23:15:12.355Z,,250-8BITMIME,
2009-06-08T23:15:12.355Z,,>,250-BINARYMIME,
2009-06-08T23:15:12.355Z,,>,250 CHUNKING,
2009-06-08T23:15:12.433Z,,<,MAIL From:<[email protected]> SIZE=52018,
2009-06-08T23:15:12.433Z,DOMAIN\Windows SBS Internet Receive DOMAIN,,,,,,,receiving message
2009-06-08T23:15:12.433Z,,250 2.1.0 Sender OK,
2009-06-08T23:15:12.496Z,,RCPT To:<[email protected]>,
2009-06-08T23:15:12.496Z,,250 2.1.5 Recipient OK,
2009-06-08T23:15:12.496Z,,DATA,
2009-06-08T23:15:12.496Z,,354 Start mail input; end with <CRLF>.<CRLF>,
2009-06-08T23:15:20.277Z,,451 4.7.0 Timeout waiting for client input,
2009-06-08T23:15:20.277Z,,,Local
2009-06-08T23:16:03.276Z,,451 4.7.0 Timeout waiting for client input,
2009-06-08T23:16:03.276Z,,,LocalI had a similar issue with fortigate firewall. I could not able to resolve this issue with fortigate. Fortunately I had a Cisco PIX firewall in my stock. Eventhough it is not a best practise I have replaced the fortigate firewall with Cisco PIX mail flow
started perfectly without any issues.
If any fortigate experts are seeing this forum please suggest what has to be done for solving this issue.
I have escalated this case to fortigate and they resolved the issue by executing the following commands on the fortigate firewall.
set tcp-mss-sender1452
set tcp-mss-receiver1452
Santhosh Sivaraman MCITP: Microsoft Exchange Server 2007/2010 | MCSE/MCSA -
Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start
I am trying to run .portal file using "Run on server" option in Workshop for weblogic.
After doing this, its trying to start the server Oracle weblogic server v10.3 at localhost and then publish my module.
Server view status shows as "State" as "Starting" and "Status" as "Synchronizing". When status reaches 82% it gets stopped there for a long time, and when 83% comes up, I can see the "State" as "Stopped" and "Status" as "Republish". And then an error window with title as "Problem Occured" and contents saying, Starting server- Oracle weblogic server v10.3 at localhost (Time of error: ...) Details >> Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start. Server did not start after 480s.
But the console tab (when I give the startup & Deployment option as "Launch Weblogic server in eclipse console) shows,
<Sep 8, 2011 6:15:03 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
e changed to STARTING> (final step alone I pasted)
Before this I can see, WLS Start mode = Development, setting Classpath ,
<Sep 8, 2011 5:56:36 PM IST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\user_projects\domains\myPortalDomain\servers\AdminServer\logs\Ad
minServer.log is opened. All server side log events will be written to this file
.>
When I checked Adminserver file its having,
<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315487671986> <BEA-160151> <Registered library Extension-Name: wlp-groupspace-app-lib, Specification-Version: 10.3, Implementation-Version: 10.3.0.1 (EAR).>
And many more similar entries...
Also there is Adminserver.logxxx file which is having,
####<Sep 8, 2011 5:33:58 PM IST> <Warning> <JDBC> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315483438048> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
####<Sep 8, 2011 5:33:58 PM IST> <Info> <JDBC> <CINTNCHEOLY0GX7> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315483438267> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.
at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
at com.pointbase.net.netJDBCConnection.a(Unknown Source)
at com.pointbase.net.netJDBCConnection.<init>(Unknown Source)
at com.pointbase.net.netJDBCDriver.getConnection(DashoA10*..:170)
at com.pointbase.net.netJDBCDriver.connect(DashoA10*..:94)
at com.pointbase.jdbc.jdbcUniversalDriver.getConnection(Unknown Source)
at com.pointbase.jdbc.jdbcUniversalDriver.connect(Unknown Source)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:316)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:217)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2282)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
And many more entries like the above...
I even tried startup & Deployment option as "Start weblogic server in Expressmode" and still same error I am getting and this time instead of in eclipse console, I can see command prompt and here also showing "Server state changed to STARTING"
FYI, I created domain with runtime JRocket 1.6.0_05.
I even tried to clean build the portal project and publish using clean option. Still same problem coming :(
FYI, my system is having 1 GB RAM only and bit slow. Could this be a problem or something else? Please suggest.
Thanks in advance.
Edited by: gopikrish on Sep 8, 2011 6:20 AMHi Gopikrish
The root cause for your error is, it is not able to start the Pointbase database. Looks like you configured a domain with default pointbase database. In the domain\bin\ one of the starup scripts like startWeblogic.cmd, you should see some lines that start the pointbase database.
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093
Instead of starting from Workshop, go to the domain root folder and start the weblogic using the command like startWeblogic.cmd (or .sh on unix). This should start the pointbase and then start the portal domain. Portal domain does need this backend pointbase database to store all the portal meta data and has datasources configured for this.
Do you have a Clustered Portal domain, with one of the managed servers located in the remote machine. If yes, and if you use default Pointbase database, you need to change something like pointbase db should not be localhost but the name of the machine where you have the admin server running.
Either way, the issue is not able to stat the pointbase db and thus serve not starting.
Thanks
Ravi Jegga -
Cannot get a connection, pool error Timeout waiting for idle object
my connection pool setting is
maxActive="3" minIdle="2" maxWait="10000" removeAbandoed="true" logAbandoned="true" removeAbandonedTimeout="30" autoreconnection="true"
we have 7 people hitting the group of search functions ,
about 3 minutes I get
I got error like
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot get a connection, pool error Timeout waiting for idle object at org.apache.tomcat.dbcp.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:104) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880) at Deferment.showResult.checStudent(showResult.java:135) at Deferment.showResult.doPost(showResult.java:99) at javax.servlet.http.HttpServlet.service(HttpServlet.java:710) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803) at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:402) at org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170) at javax.servlet.http.HttpServlet.service(HttpServlet.java:710) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
I just wonder
1) Cannot get a connection, pool error Timeout waiting for idle object-> cause by connection pool leaking or other problem.
2) Setting the maxactive to -1 ( suggestion from Google) , if I set my connection to ulimit , waht should I put on minIdle="2"
3) How can I test my connection pool have problem or not ? is
SHOW PROCESSLIST; tolding me someinformation? I use Mysql
Thank you!I try something like ps2 = conn.prepareStatement(target);
ps2.setString(1, UNumber); // set input parameter
rs = ps2.executeQuery();
sendMail = 0;//how many rows we can find.
while (rs.next()) {
sendMail++;
ps2.close();
rs.close();
conn.close();
if ((count1 == 0) || (count2 == 0)) {
conn.rollback();
} else {
conn.commit();
conn.setAutoCommit(true);
ps.close();
calstat2.close();
conn.close();
calstat = (CallableStatement) conn.prepareCall("{call findStudent}");
calstat.executeQuery();
calstat.close();
conn.close();is that enought? what else I should do to make sure I did close all the connection, after I use it ?
thank you -
Cannot start Xserver after installing Solaris 10 08/07 for Sparc
Hi,
Has anyone ecountered the following promblem after installing Solaris 10 08/07 for a Sparc processor .I am trying to exceed to the server but cannot get access to CDE or Gnome as the Xserver is not running!
getting the following message on booting not sure if related.
SUNW-MSG-ID: SUNOS-8000-1L, TYPE: Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Thu Nov 8 10:07:20 CET 2007
PLATFORM: SUNW,Netra-T2000, CSN: -, HOSTNAME:
SOURCE: eft, REV: 1.16
EVENT-ID: e627d1f9-bd6e-c850-dd0e-a5dbfaa64e48
DESC: The EFT Diagnosis Engine encountered telemetry for which it is unable to p
roduce a diagnosis. Refer to http://sun.com/msg/SUNOS-8000-1L for more informat
ion.
AUTO-RESPONSE: Error reports from the component will be logged for examination b
y Sun.
IMPACT: Automated diagnosis and response for these events will not occur.
REC-ACTION: Run pkgchk -n SUNWfmd to ensure that fault management software is in
stalled properly. Contact Sun for support.
I Have ran this pkgchk -n SUNWfmd and there is no response
I have tried creating the xorg.conf file /usr/X11/bin/Xorgconfig as recommened form a similar thread but this has not worked.
I can telnet when I try to ssh it is asking me for interactive kb security check and can't login with root password...
which works when I telent!!
Has anyone ecountered this before??
Hendy1-Which server are u using? Xorg or Xsun?
2-did you try /usr/X11/bin/xorgcfg ?
3-did you try kdmconfig ? -
Timeout waiting for catalog update on ReplicatedCache
Has anyone seen this error before or have an idea what might have caused it?
The logs do not show any communication issues happening in the cluster at the time of this error.
Caused by: java.lang.IllegalStateException: Timeout waiting for catalog update
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache.ensureCache(ReplicatedCache.CDB:84)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache$Router(SafeCacheService.CDB:1)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache(SafeCacheService.CDB:46)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:843)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:1045)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:290)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:745)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:722)
Thanks,
SteveI am seeing same exception on service start-up. Can some one please provide any pointers/Suggestions?
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
Oracle Coherence GE 3.5/459 <Info> (thread=main, member=8): Waiting for catalog update: 7
java.lang.IllegalStateException: Timeout waiting for catalog update
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache.ensureCache(ReplicatedCache.CDB:84)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache$Router(SafeCacheService.CDB:1)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache(SafeCacheService.CDB:46)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:717)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:919)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:283)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:686)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:664)
thanks, -
Timeout waiting for iokit to quiet
hi all,
I use a macmini, after upgrading to 10.8.4, it becomes a little slow when bootup, and freezes when login window displays. According to the console log, it takes munites to "hidd: Timeout waiting for IOKit to be quiet"
does anyone knows what's going on?
JoeTry booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. -
TS1702 Tried installing application still says waiting for a whole day now
Tried installing application still says waiting for a whole day now
Reset iPad and try again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Machine freeze, timeout waiting for nf to load
my imac27 was randomly freezing requiring reboot, other times kernel panicking.
apple changed the logicboard after doing some diagnostics.
for a while it was fine -- then began freezing again.
console logs seem to show the following repeated kernel error
Timeout while waiting for nf to load: > AR_PHY_AGC_CONTROL=0x40d22
this is logged multiple times (2 dozen) before the system eventually freezes.
searching on this error -- seems to point to a network problem. either base station/WAP or wireless NIC in the imac, but i can't be sure and the details are still murky.
can anyone shed light here?I have exactly the same problem.
Apple changed the bluetooth module, but the problem is still hier.
Someone has got a solution? -
Force fsck on boot and timeout waiting for device issues [SOLVED]
Archlinux starts checking fs on every boot since linux and systemd packages were updated last night.
systemd --->213-5
linux ---->3.14.5-1
Another issue appears with last update
Timed out waiting for device dev-disk-by\x2duuid-9f780ada\x2d0671\
Dependency failed for /dev/disk/by-uuid/9f780ada-0671-43d8-b036-f9
Dependency failed for Swap.
I have this issue on my laptop which was updated yesterday.I have also desktop running archlinux again I've just checked out the systemd and linux versions.The systemd package is not the latest one it's 212-3.I havent any problem on that machine.I guess systemd is responsible of this cause.
I've just reboot and realized that systemd-fsck says Super block last write is in the future.Date and time is correct in BIOS same as on linux
Last edited by gecici90 (2014-06-05 21:10:52)I had the same problem, I get in the recovery console after forced fsck.
But downgrading systemd and systemd-sysvcompat to their previous version made it all work back again.
The sorted list of the upgraded packages:
[2014-06-05 21:11] [PACMAN] installed libx264 (1:142.20140311-4)
[2014-06-05 21:11] [PACMAN] upgraded btrfs-progs (3.14.1-1 -> 3.14.2-2)
[2014-06-05 21:11] [PACMAN] upgraded cifs-utils (6.2-1 -> 6.3-1)
[2014-06-05 21:11] [PACMAN] upgraded imagemagick (6.8.9.1-2 -> 6.8.9.1-3)
[2014-06-05 21:11] [PACMAN] upgraded filesystem (2013.05-2 -> 2014.05-2)
[2014-06-05 21:11] [PACMAN] upgraded lib32-libdbus (1.8.0-1 -> 1.8.2-1)
[2014-06-05 21:11] [PACMAN] upgraded libproxy (0.4.11-2 -> 0.4.11-3)
[2014-06-05 21:11] [PACMAN] upgraded libpurple (2.10.9-1 -> 2.10.9-2)
[2014-06-05 21:11] [PACMAN] upgraded libsystemd (212-3 -> 213-5)
[2014-06-05 21:11] [PACMAN] upgraded libwbclient (4.1.7-1 -> 4.1.8-1)
[2014-06-05 21:11] [PACMAN] upgraded openssl (1.0.1.g-1 -> 1.0.1.h-1)
[2014-06-05 21:11] [PACMAN] upgraded perl (5.18.2-2 -> 5.20.0-2)
[2014-06-05 21:11] [PACMAN] upgraded perl-xml-parser (2.41-4 -> 2.41-5)
[2014-06-05 21:11] [PACMAN] upgraded perl-yaml-syck (1.27-1 -> 1.27-2)
[2014-06-05 21:11] [PACMAN] upgraded pidgin (2.10.9-1 -> 2.10.9-2)
[2014-06-05 21:11] [PACMAN] upgraded postgresql-libs (9.3.4-1 -> 9.3.4-2)
[2014-06-05 21:11] [PACMAN] upgraded python2 (2.7.6-3 -> 2.7.7-1)
[2014-06-05 21:11] [PACMAN] upgraded smbclient (4.1.7-1 -> 4.1.8-1)
[2014-06-05 21:11] [PACMAN] upgraded subversion (1.8.9-1 -> 1.8.9-2)
[2014-06-05 21:11] [PACMAN] upgraded systemd (212-3 -> 213-5)
[2014-06-05 21:11] [PACMAN] upgraded systemd-sysvcompat (212-3 -> 213-5)
[2014-06-05 21:11] [PACMAN] upgraded x264 (1:142.20140311-1 -> 1:142.20140311-4)
[2014-06-05 21:11] [PACMAN] upgraded xchat (2.8.8-13 -> 2.8.8-14)
[2014-06-05 21:11] [PACMAN] upgraded xfconf (4.10.0-3 -> 4.10.0-4)
Downgrading systemd and systemd-sysvcompat makes my computer boots normally:
[2014-06-05 21:43] [PACMAN] Running 'pacman -U /var/cache/pacman/pkg/systemd-212-3-x86_64.pkg.tar.xz /var/cache/pacman/pkg/systemd-sysvcompat-212-3-x86_64.pkg.tar.xz'
[2014-06-05 21:43] [PACMAN] downgraded systemd (213-5 -> 212-3)
[2014-06-05 21:43] [PACMAN] downgraded systemd-sysvcompat (213-5 -> 212-3)
Maybe you are looking for
-
I have lost all my data from my iphone during synchronisation. Can anyone help me?
-
I have a Think Pad T420 with dual boot option of Windows 7 Pro and Windows XP Pro both 32-bit. However for me to boot into Windows 7 I have to set the SATA configuration in the BIOS to AHCI Mode, but that will cause the XP to BSOD with the error of u
-
Unable to Create an iTunes account (free usage or otherwise) (iPhone 3GS)
So my father and I just bought our selves iPhones to stay in touch (today is the 24th... well now 25th). I recently wanted to try to get foursquare, skype, and a few other free apps so I decided to try making me an iTunes account. We tried 3 differen
-
Number Range in Import Manager
Hi, Can I create a field which is automatically incremented with a specified number range and which is not unique?? Regards, RK
-
After running for a while (hours ? days?) I lose the ability to "mouseover" data on a website and get info. Specifically on Yahoo's portal page, I can't mouse over a news item and get a summary. Restarting Firefox, in safe mode or normal mode, does n