Installing Solaris 8 in Sony VAIO FX120
Can we install Solaris on the secondary partition on a Laptop.???. I have a SONY VAIO FX120 and I want to install SOLARIS 8 on it.
Do not partition any space for Solaris, it will do that on its own. Once Solaris is installed, it will set its partition to be the active one and then give you a choice of partitions you'd like to boot.
[email protected]
Similar Messages
-
I have a Sony Vaio Fit 14 laptop that has Windows 8 and pre-installed Photoshop Elements 12.
The Photoshop elements 12 is giving me an error 16 and I can not get it to work.
I have no installation disk and really do not want to restore the laptop to factory out of the box.
Is there any other way to fix this issue?
Thanks,
JeffProbably you could get some help from Sony. Possibly the install image is somewhere on your computer or they could give you a copy.
-
I download firefox and hit run: a window opens and asks for a password for the administrator, I type in the password the window close and does nothing
Right-click the setup file and select '''Run as...'''
-
Help Installing Solaris 10 on Sony vaio laptop which shipped with Vista
Hello All,
I am very new to solaris. As part of first step of learning i am trying to install solaris on my laptop, as it already downgraded from Vista to XP. Now my laptop is loaded with XP i am planning to install solaris as a dual boot.
Can anybody guide me or suggest me how to walk through the installation process.
I have encountered an issue while trying to install installing ( it is unable to detect the harddisk of my laptop, i am unable to find out the root cause i have two options in mind, 1) there is no unpartitioned space left for solaris to install & the 2) is SATA disabling.
Help is highly appretiated.
Thanks,
Naveen.From my (admittedly limited) experience:
1) It's not a matter of merely no unpartitioned space; the installer would still see the drive.
2) SATA is not a showstopper. I installed on a 500 GB SATA drive on an HP XW4400 workstation that has an Intel 82801G SATA controller. However, when I first tried to install, I got to the list of target drives and the list was blank as if I had no drives. I went into the bios setting of the workstation and changed 'SATA emulation' from "AHCI" to "IDE" and then Solaris installed just fine. -
Solaris installaton on Sony Vaio PCG-F707 network not working
Hi,
I am new to Solaris, I use unix as a developer no admin experience. I try to install it on my laptop Sony Vaio PCG-F707, which is an European model equivalent to PCG-F403 of american model.
It detects the display and mose properly. There is an IRQ conflict(IRQ 5) with the sound blaster and PNP device. My network card is on the docking system it connected to the USB. Window detected it as KLSI USB Ethernet Adapter. Physical address is: 08-00-46-02-91-3D.
Everytime it boots shows the message IRQ conflict. I tried to delete the device and mannually assign the IRQs, but it dectects auto metically and override that. In desktop It saying no sound device found.
Network is not detected probably. It is showing only one driver to lo0 (127.0.0.1). It successfully pings to localhost only. It doesn't ping to any other window box in the network neither to the netgear router.
I also try to check the other USB port, by connecting the sony digital camera, it didn't detected by the camera browser program.
I disable the Plug & Play from the bios and reboot no difference.
I like the Solaris software very much wish to use it, but without network and sound, it is no use. Please help me on this.
Thanks in advance.
LalitHi,
I am also new to Solaris and I have very similar problem with installation of Solaris 10 on HP Server tc2120.
In my case, there is no conflict.
Network monitor is showing only one connection; lo0 (127.0.0.1). I am not able to see and configure the internal network adapter : Integrated Broadcom NC7760 10/100/1000
Can anyone help me how to configure (to assign IP address; gateway etc..) network adapter on Solaris?
Thanks in advance..
Mumtaz -
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely
Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371> -
im trying to install itunes on windows vista sony vaio. It goes through the whole process then says administrator has settings to prevent this installation. Any help would be great
Try the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems -
TS1424 i have a sony vaio and I am unable to install iTunes
i need assistance installing iTunes, i have a sony vaio with windows 7. I keep on getting errors with download.
are you using this link?
http://support.apple.com/kb/DL1047?viewlocale=en_US&locale=en_US -
hi, i have sony vaio laptop that already has photoshop elements 12 installed once bought, now i am having a configuration error 12 and says that i need to uninstall and reinstall which i cant. what can i do without uninstalling?
hi, i have sony vaio laptop that already has photoshop elements 12 installed once bought, now i am having a configuration error 12 and says that i need to uninstall and reinstall which i cant. what can i do without uninstalling?
-
Difficulty installing upgrade version Premiere Pro CS3 on Sony Vaio
I hope someone can help me. I purchased Sony Vaio multi media PC with Premiere standard factory installed. Last year I purchased upgrade premiere pro CS3 and installed it I had shared component error that was resolved with adobe tech support. the program worked flowlessly until recently my hard drive crashed and had to be replaced. Since then when I try to install Premiere Pro upgrade it has locked the program and is asking for serial number factory installed premier standard. The very first time I installed upgrade program originally it never did that . What can I do?
Contact Adobe.
-
8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System
Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY -
TS3212 cant download itunes on sony vaio windows 8
I need help please
I purchased a sony vaio a few weeks ago with windows 8 now i cant seem to get my itunes to either download or to work
I initially installed itunes before i activated my norton internet security and i was able to get itunes to download and play music no bother but then when i plugged my iPhone 5 in to sync to the new computer it ended up having a few problems
1. it either said that it couldnt sync due to an error code 0xE8004002
2. it said it couldnt read my iphone and to restore to factory settings
on the first problem i just ejected the iphone and did a reboot and i reboot the computer also but then when i connected again i then got the second error
so i backed everything up on icloud that i could and then tried to restore to factory settings but then another error came up saying that due to an unknown error i could not restore the iphone
i looked at forums and i saw that i should just manually restore from the iphone itself which i did but then icloud lost have my notes that i had but itunes recognised the phone and sync did start but then half way through said that songs could not be snyc'd due to an error and then all my music was greyed out and i couldnt play it
Then i had to begin again with all the errors of not connecting
i then read more forums and was advised to delete itunes then reinstall again. I uninstalled but now i cant get it to reinstall again. Internet explorer keeps saying download interupted when i get to 99% and it will not go any further and google chrome says pc doesnt allow download check internet settings
please help because im about going barmy with this
thanksgot it to download thanks very much
-
[SOLVED]Custom DSDT not loading - OEM battery doesn't work - Sony Vaio
EDITING ORIGINAL POST TO POST SOLUTION so I don't do a massive bump
Installed windows and ran the BIOS flasher that came with the battery. Didn't work until I changed a line in the plaintext configuration file (config.ini or something) it comes with. Changed "Capacity: 20" to "Capacity: -10". This changed the battery charge requirement from 20% to negative ten percent (any negative number will do), allowing the program to run and flash the BIOS. Didn't realize I could do that, but it fixed the problem 100%.
#### BEGIN ORIGINAL POST: ################################
Hey guys,
I'm a bit of a linux noob, but I've spent many hours this week trying to fix this issue on my own and have learned a lot about making custom kernels, hardware stuff, ACPI, and ABS. However, nothing I've done has worked and I've hit a wall. For reference, I'm on a Sony Vaio VGN-FZ4000 with linux-3.0 base kernel, gnome3/gdm. The battery is made in china and doesn't list a manufacturer, just model number BPS8, 52000mAh.
[Backstory]
So I recently got an OEM battery to replace the broken original, which hasn't worked since before I installed arch (though it worked with an Arch install I did a couple years ago). When I first plugged it in, the gnome battery symbol popped up listing the battery at 0% with an exclamation icon. I unplugged from AC power and the laptop still ran, but the battery monitor just said it was at 0% and 'Estimating' remaining time. I figured this was a glitch with gnome or just because it was this battery's first cycle so I let it run down until it hard-crashed. Then I plugged back into AC and tried to turn on the computer, but it wouldn't do anything until I removed the battery.
Looking into the problem I discovered this was due to the ACPI firmware table DSDT being compiled for Windows, which has, shall we say, fewer restrictions on sanity than the Intel ASL compiler used for UNIX systems. Sure enough I extracted /sys/firmware/acpi/tables/DSDT to find that its section about the battery contained the entry 'Zero' for Battery Technology, which translates to "non-rechargeable", rather than 'One', which makes it chargeable. acpitool confirmed this; my system thought the battery was non-rechargeable and was constantly discharging it. Needless to say I've only been putting it in temporarily to test solutions since.
[/backstory]
[tl;dr] DSDT firmware contains malformed battery description, now I can't get my system to run with a custom DSDT. [/tl;dr]
Attempted solutions:
[1]
Extract, modify, recompile DSDT and include it with the kernel compilation .config options
CONIFG_ACPI_CUSTOM_DSDT=y
CONFIG_ACPI_CUSTOM_DSDT_FILE="/usr/src/custom_dsdt.hex
CONIFG_STANDALONE=n
as suggested here, a page linked to by the arch wiki page on DSDT.
I followed the instructions but no matter what this has generated errors during the kernel compilation, sometimes due to every line containing unexpected \231 (or other numbers) characters, sometimes finding some error in the DSDT file and then claiming that the driver it was compiling (ol.c somewhere in the drivers/acpi section I believe) had references to undefined functions all over the place. I CANNOT compile with a custom DSDT specified.
[2]
Place recompiled DSDT in /lib/initcpio/custom.dsdt and add 'dsdt' to the HOOKS in mkinitcpio (and rebuild the initramfs-linux-*.img, of course). Another version of this included recompiling the kernel with CONFIG_STANDALONE disabled.
In neither of these situations has the running DSDT ever been anything but the BIOS-supplied one and not once has the battery shown any different behavior.
acpitool and $ cat /proc/acpi/battery/BAT0/info have consistently claimed the information specified in the BIOS-supplied DSDT; the battery is non-rechargeable and is discharging at an unknown rate. Sometimes acpi will even report that the battery has zero capacity.
The arch wiki does say mkinitcpio doesn't support the dsdt hook as of 2.6.30, but [1] didn't work either and mkinitcpio -H dsdt still told me to try this so I did.
[3]
The final solution I have tried has been to do [2] but to recompile the kernel with the legacy support for battery and ac adapter stuff disabled. I tried this because it was suggested in the kernel.log;
Sep 13 11:51:03 localhost kernel: [ 11.740059] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 13 11:51:03 localhost kernel: [ 11.753434] ACPI: AC Adapter [ADP1] (on-line)
The corresponding line now reads
ACPI: AC Adapter [ADP1] (on-line)
(The same goes for the battery BAT0)
but all this does is remove the battery/ and adp1/ folders from /proc/acpi/ and break acpitool functionality. The log still doesn't mention the dsdt hook, either.
[4]
The old way to do this was to use the acpi-dsdt-initrd-patch-* patch, but that hasn't been updated for modern kernels, presumably because of the new "functionality" from mkiniticpio. The current kernel .config doesn't include any options for ACPI initrd/initramfs support or reading a DSDT from initramfs, which is the functionality provided by this patch.
This covers all the methods I've been able to find on the internet and I'm at a loss for what to do. Am I doing something wrong in [1]? Under what conditions will the compiler fail/succeed with a CONFIG_ACPI_CUSTOM_DSDT_FILE?
When I recompile I fix the 'Zero' definition and a couple compiler errors and warnings. The errors come from section length definitions, which read as 0x00000000 rather than the appropriate max-min value so I fix those, and the warnings come from _T_* methods belonging to the compiler, so I refactor the code to remove the initial underscores. The last warning comes from an isolated And statement that's within brackets (compiler complains it doesn't do anything), but if I remove that the compiler fails hard.
Thanks to anyone who's read this far. Please let me know if you have any ideas how to get my system to use a customized DSDT.
Last edited by paraffin (2011-09-29 23:20:30)Thanks for the offer, Radioactive man However, I'm actually compiling a customized kernel with the linux-ck and -sony patches, so your packages won't help. (The custom kernel works fine and I've tested this battery behavior on the the regular, -ck, and -sony kernels as well)
Anyway, so I tried another compile with
CONFIG_PREVENT_FIRMWARE_BUILD=n in addition to the options listed in [1] and that time it compiled.
Unfortunately it still didn't load the DSDT!
I did catch a quick little error message that turned up in kernel.log though;
/var/log/kernel.log:Sep 15 11:50:24 localhost kernel: [ 0.925780] acerhdf: unknown (unsupported) BIOS version Sony Corporation/VGN-FZ4000E/R2110J7, please report, aborting!
acerhdf is a fan controller module for the Aspire One, and perhaps I left that in the kernel config and it's preventing the custom DSDT from loading, even though the acerhdf module never gets loaded itself, nor is it in my rc.conf or anything else... If that was the cause of all this, I'm gonna be angry...
Anyway, this message does not appear with my latest kernel build because I took off the custom DSDT option, hoping to be able to use ACPI_CUSTOM_METHOD=y, which supposedly allows one to inject a custom AML method into a debug fs. It wouldn't have worked anyway, as it doesn't let you modify Device sections, but even with a dummy method insertion it didn't give my root modification privileges as it was supposed to...
Will try recompiling AGAIN with this CONFIG_ACERHDF=n (it's simply 'not set' in my current .config), while also enabling the custom kernel etc. If this doesn't work I have no idea what I'll do.
Anyway, thanks for your help and time: -
Why wont me itunes downlaod to my new sony vaio?
i follow all of the steps and have managed to get my itunes onto my ipad and iphone but for some reason nothing appears on the vaio. My original laptop is broken and will no longer switch on which is where my account was originally set up. I dont really understand icloud. i thought everything was stored there so dont understand why this is happening Can anyone help please?What exactly is the problem that you are having ? Is it with downloading the iTunes program itself, or redownloading your purchases ?
If iTunes itself then you can download it from here : http://www.apple.com/itunes/download/
If it doesn't download then have you tried a different browser, and/or tried changing the settings on the browser that you are using e.g. turn off 'pop-up blocker' ?
If you've installed iTunes and want to download your past purchases, then what you can redownload depends upon what country that you are in, and whether the items are still in your country's store. What you can redownload will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage :
But ideally you'd have your own backup copy of all your downloads/library (and not relying on redownloading), a song/album etc could be removed from the store at any time.
If you will be syncing your iPad and iPhone to that computer then you may also find this page useful : https://discussions.apple.com/docs/DOC-3141 -
Sony Vaio FZ Series - LCD brightness
Hi All,
I have recently bought a Sony VAIO FZ11S and I've successfully installed Archlinux:
Fully working:
- CPU Scaling (using cpudyn)
- Multimedia keys (mute, volume up/down, play/stop, etc. using Xmodmap)
- Wireless (using iwl3945. Can't connect with AP with hidden SSID)
- Nvidia GeForce 8400M (using latest nvidia drivers with stock arch kernel 2.6.23)
- Audio (after adding 'options snd-hda-intel model=vaio' to /etc/modprobe.conf. MIC not tested yet)
Untested:
- bluetooth
- SD/MS card reader
- Video camera
NOT WORKING:
- LCD brightness adjustment: FN+F5/F6 are detected correctly by acpid but nothing happens. I'm using the module sony-laptop included with kernel 2.6. Folder /sys/class/backlight is empty. I can use nvidia-settings to change COLOR BRIGHTNESS but this is NOT a good solution IMHO. I'd like to get the same capabilities I get running Windows Vista. (change LCD backlight).
I've read somewhere it is a problem common to all laptop with the same NVIDIA videocard. Does anyone know a fix for this? I've also tried with latest nvidia beta drivers with no success.
- Hibernate/suspend. I tried with pm-tools to suspend/hibernate laptop but nothing is working correctly. I didn't investigate further. Has anyone got a quick solution for this?
lspci output:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GT (rev a1)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 16)
09:03.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
09:03.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
09:03.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
Please help
V.
Last edited by Vins (2007-12-09 11:37:08)I recently bought a Sony FZ180, almost identical stats and hardware.
I tried all the same suggestions, which worked fine on my old laptop, but will not for this one. If anyone can think of another method to control the backlight I would be grateful.
Also, I tested the SD slot, the TI driver recognizes when a card is inserted, but no devices or mount-points are created.
tifm_core: MMC/SD card detected in socket 0:1
tifm0 : demand removing card from socket 0:1
(The second line is from me removing the card, not a defective slot.)
Everything else works great, though. Arch boots to a full KDE desktop much, much faster than my cleaned-up vista partition. I'm really happy overall.
Maybe you are looking for
-
Iphone 6 plus shipment concerns
Hello Everyone, I was wondering if anyone, anyone at all has heard anything about updated stock that apple in sending out to AT&T (the carrier I pre ordered through) to distribute on the 19th. I woke up and pre ordered mine by 3:02am eastern time and
-
what if the user also forgot ps apple? how to solve this problem? whether the iPhone can still be used?
-
i brought a white color iphone 4s at full price form USA. i take it back to china, found it can't support any network like china unicom and china mobile. any one knows the reasom, the ios is 5.0.1. model is :MC920LL. i feel very angry. any one know t
-
My Mac recently began shutting down or dying randomly while it's battery is fully charged. The only way I found to keep it from randomly going blank is to keep it plugged in. I don't know if this is an internal problem or if my battery needs to be re
-
just donot know why navigastion buttons dont work