Installing SP3 on MSSQL SERVER 2008 with Replication

Hi there
How would one go about installing SP3 on SQL 2008 with replication? Would i need to turn off replication to avoid schema changes taking place across the line?
Our servers are across the country and wouldn't want all that data to replicate over the tiny line we have.
Instead we would like to install SP3 at the publisher and then at the subscriber.
During testing on the dev instances, after stopping all agents ( log reader and queue reader) then installing and turning them back on didnt seem to work.Are there any whitepapers on the proper process on how to install SP3?
Thanks in advance

Hello,
You should apply the service pack on the distributor first, then the publisher, and finally the subscriber.
To my knowledge, replication should be suspended while the service pack will be applied on the distributor. Transaction will remain on the publisher until the distributor is
available again.
When you apply the service pack on the subscriber, the replicaction from the distributor to the subscriber will be suspended, and transaction will be on the distributor until the subscriber is available again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008

Hi there,
Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
I had bunch of questions also asked in this Oracle forum like :
Step by Step PeopleSoft HRMS Installation from scratch.
Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
Hope it helps to newbie's in PeopleSoft Apps like me.
Regards,
Vishal Mody
Edited by: 897150 on Jan 25, 2012 10:11 AM
Edited by: 897150 on Jan 25, 2012 10:13 AM

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

Got new update, instaled on my home server 2008, as I had the previous version. Now with the new Itunes my home sharring is ot working when it use to work fine on the older version

Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my Laptop on windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

Installing ERP2005 SR2 on MSSQL Server 2008?

Hi
Hoping all the experts here can help me.
We are creating a new system via system copy. Our source is ERP2005 SR2 on AIX/DB2 and our target is Windows 2008 Server and MSSQL Server 2008.
We have taken the export of the source db.
The installation kit we have for the target is part number 52023163 SAP ERP 2005 SR2 MSSQLSRV Windows.
I am confused as to the supported releases of the various components required to successfully create the new system.
The install kit has installation master DVD BS 2005 SR2 SAP Insatalltion Master (part 51033208) and bundled in the kit is MSSQL2005.
I have downloaded the SQL 2008 version and installed it via the script as instructed in the SAP guide. I started SAPinst and ran through various parameters. When I get to the option 'MS SQL Server --> Database Connection Information' I specify the server the database is sitting on, click next and get the following popup ' The MS SQL Server Version 10 is not supported for the installation of this product. Use appropriate MS SQL Server Version'
I am wondering if I am using the correct installation kit, and have got myself very confused searching around SAPnet. Notes 1152240 and 1076022 point towards certain restrictions when installing on SQL Server 2008. It asks what version of installation master and netweaver release I am on and I am not clear on this. Could anyone help here please, at least to confirm what versions I am on?
Thanks Gregory

Hi Markus
Thanks, even though our db source export is from ERP2005 SR2 I can still use the SR3 kit to install the target? Should the source and target releases not remain the same?
Or, do you mean just use the SR3 Installation Master rather than the whole kit?
Edited by: Gregory Goldsmith on Nov 17, 2009 2:51 PM

Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint

Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav Kothari

Hi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen

Is it possible to install Firefox on Windows Server 2008?

I try to install Firefox 3.6 on Windows server 2008 but it says that the file is corrupted.
Is it possible to install Firefox on Windows Server 2008?

From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed.

Is it possible to install and run Windows Server 2008 on a Mac Mini Server in a Virtual Machine software like Parallels

I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
Thanks

From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed.

Configuring agent on windows server 2008 with SQL server 2008R2

Hi all,
I have installed the ODI on Server 2008 machine i have successfully configure the ODI repositories(Master & work) on Sql Server 2008 R2.I have created the agent in topology navigator with name:LOCALAGENT and updated the odiparam.bat file accordingly now when i an starting the agent services with following command i am getting the error given below.
C:\Oracle\Middleware\Oracle_ODI1\oracledi\agent\bin>agent -NAME=LOCALAGENT
OracleDI: Starting Agent ...
2011-06-19 22:44:00.934 ERROR ODI-1131 Agent LOCALAGENT encountered an error: ODI-1400: Agent LOCALAGENT start failure: JDBC connection error occurs w
hile connecting to the master repository.
ODI-1441: Unable to connect to the master repository at JBDC URL=jdbc:sqlserver://WIN-KA2EOS0C0ML\sqlinst:1433 with USER=hypsqladmim.
Caused By: java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from
Datasource
at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:668)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:613)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:607)
at oracle.odi.Agent.validateConnectionProperties(Agent.java:398)
at oracle.odi.Agent.doGetDataSource(Agent.java:390)
at oracle.odi.Agent.main(Agent.java:471)
Caused by: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:421)
at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:389)
at oracle.ucp.jdbc.DataSourceConnectionFactoryAdapter.createConnection(DataSourceConnectionFactoryAdapter.java:105)
at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPoolInternal.createOnePooledConnectionInternal(UniversalConnectionPoolImpl
.java:1570)
at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPoolInternal.access$600(UniversalConnectionPoolImpl.java:1378)
at oracle.ucp.common.UniversalConnectionPoolImpl.createOnePooledConnection(UniversalConnectionPoolImpl.java:445)
at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnectionWithoutCountingRequests(UniversalConnectionPoolImpl.java:302)
at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnection(UniversalConnectionPoolImpl.java:129)
at oracle.ucp.jdbc.JDBCConnectionPool.borrowConnection(JDBCConnectionPool.java:119)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:655)
... 5 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user 'hypsqladmim'.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(SQLServerException.java:196)
at com.microsoft.sqlserver.jdbc.TDSTokenHandler.onEOF(tdsparser.java:246)
at com.microsoft.sqlserver.jdbc.TDSParser.parse(tdsparser.java:83)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(SQLServerConnection.java:2532)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(SQLServerConnection.java:1929)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(SQLServerConnection.java:41)
at com.microsoft.sqlserver.jdbc.SQLServerConnection$LogonCommand.doExecute(SQLServerConnection.java:1917)
at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:4026)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1416)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1061)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:833)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:716)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:841)
at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:368)
at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:352)
at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:286)
at oracle.ucp.jdbc.DataSourceConnectionFactoryAdapter.createConnection(DataSourceConnectionFactoryAdapter.java:99)
... 12 more
C:\Oracle\Middleware\Oracle_ODI1\oracledi\agent\bin>
Can any buddy helps me with this. I need to know what i did wrong is it the url that i specified at odiparam.bat file ?
Thanks
Gourav Atalkar

Hi,
What is the driver name ?
It should be com.microsoft.sqlserver.jdbc.SQLServerDriver
JDBC URL use the following format: jdbc:sqlserver://<host>:<port>
Thanks,
Sutirtha

Install NW2004s on windows server 2008

I want to install and configure NW2004s on windows server 2008 with Oracle combination , Can some one let me know how do i go about or could guide me withthe steps for the same. please also suggest some SAP notes, which have more information for applying patches

Hi Harender,
You can get the details whether SAP supports this platforms or not at http://service.sap.com/pam.
You can also get the installation guides or documents for installation at
http://service.sap.com/instguides.
Refer to the note 822379 it might help youfor patches upload.
Reward points if helpfull.
Regards,
Vamshi.

Cannot install WSUS in Windows Server 2008

Hi.
I want to install WSUS in Windows Server 2008 R2 Enterprise, but when it try I have a prompt to upgrade Web Services (IIS), then I have a Fail message.
Here is the HTML File log:
<Informational>: This server might need to be restarted after the installation completes.
Web Server (IIS)
<Informational>: Find out more about Windows System Resource Manager (WSRM) and how it can help optimize CPU usage
Web Server
Application Development
ASP.NET
.NET Extensibility
ISAPI Extensions
ISAPI Filters
Security
Windows Authentication
Performance
Dynamic Content Compression
Management Tools
IIS 6 Management Compatibility
IIS 6 Metabase Compatibility
Windows Server Update Services
Web Server (IIS): Installation failed
The following role services were not installed:
Web Server
Application Development
ASP.NET
.NET Extensibility
ISAPI Extensions
ISAPI Filters
Security
Windows Authentication
Performance
Dynamic Content Compression
Management Tools
IIS 6 Management Compatibility
IIS 6 Metabase Compatibility
Windows Server Update Services: Installation failed
<Error>: The update could not be found. There may be a network connection issue. Click here for more information.
Please refer to the full log at: 'C:\Windows\logs\ServerManager.log'
And the .log file log is here:
2988: 2009-07-14 09:19:42.125 [InstallationProgressPage] Loading progress page...
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Creating WindowsUpdateDownloader.
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Searching for Updates...
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Starting asynchronous download.
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader]   Creating session.
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader]   Search query: 'CategoryIDs contains '4e487029-f550-4c22-8b31-9173f3f95786''
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader]   Searching....
2988: 2009-07-14 09:19:51.328 [WindowsUpdateDownloader]   Initial search failed, try again on WU server.
2988: 2009-07-14 09:19:52.843 [WindowsUpdateDownloader]   Search returned: Succeeded, found 0 updates.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Search completed, result: Succeeded.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Downloading...
2988: 2009-07-14 09:19:52.843 [WindowsUpdateDownloader]   Sending failure DownloadComplete event.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Download completed, result: NotStarted.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Error (Id=0) Failure message: 'The update could not be found. There may be a network connection issue. <a href="WSUS.chm::/html/54a9eb1f-5dd1-42d8-ad00-dae55d7b9463.htm">Click here for more information.</a>'
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Invoking LoadFinishPage.
2988: 2009-07-14 09:19:52.859 [InstallationProgressPage] About to load finish page...
2988: 2009-07-14 09:19:52.859 [InstallationFinishPage]    Loading finish page
2988: 2009-07-14 09:19:52.875 [InstallationFinishPage]    Finish page loaded
I checked my Internet Connection, and no problems with that, Wndows update works fine.
Regards

The reason these solutions all work is because previously these machines were WSUS CLIENTS, and thus looking to the (sometimes no longer present) WSUS SERVER to find the WSUS Dynamic Installer update.
By unlinking the GPO or moving the server to the Computer Container (not OU, btw), you effectively revert that machine to being an Automatic Updates client, and it can then obtain the WSUS Dynamic Installer update from Automatic
Updates.
You can also achieve this objective by:
1. Run gpupdate /force (to reset the 90 minute GPRefresh timer).
2. Edit the registry and set the HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU "UseWUServer" value to ZERO, which also disables the machine as a WSUS Client.
From there you'll have at least sixty minutes (minimum GPrefresh interval) to install the WSUS Role, after which the machine will automatically revert back to the previous "WSUS Client" status -- which, presumably, is to be a client of itself.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com

How to export data with column headers in sql server 2008 with bcp command?

Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM   [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.

Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM   [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD.

Install ASM On Windows server 2008

Hi all Nice Evening, i want to know how to install asm on windows server 2008 step by step guide.

Hi,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/storeman.htm#sthref1648
Please use the above link to check the step by step configuration
Regards,
Taj

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line:
http://technet.microsoft.com/en-us/library/cc731873%28v=ws.10%29.aspx
dcpromo /unattend /InstallDns:yes /ParentDomainDNSName:mysite.com /replicaOrNewDomain:domain /newDomain:child /newDomainDnsName:gridview.mysite.com /childName:gridview /DomainNetbiosName:gridview
/databasePath:"c:\Windows\ntds" /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\SYSVOL" /safeModeAdminPassword:pass1 /forestLevel:4 /domainLevel:4 /rebootOnCompletion:yes
Error Code:
The specific argument 'childName' is not recognized.
I am trying to insert gridview as a childname.

Hi,
Before going further, can we try another domain name to see what will happen?
Besides, if the issue persists, we can try installing a new child domain by using the GUI.
Installing a New Child Domain by Using the Graphical User Interface (GUI)
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
Best regards,
Frank Shen

How to install 10G XE onWindows Server 2008

please help i need install 10G XE onWindows Server 2008
please

Pl identify which exact version of Windows 2008. 10gXE is not certified on Win 2008, so things may or may not work as expected.
http://docs.oracle.com/cd/B25329_01/doc/install.102/b25143/toc.htm
Use the search feature ( https://forums.oracle.com/forums/search.jspa?threadID=&q=XE+AND+Windows+AND+2008&objID=c18&dateRange=all&userID=&numResults=15&rankBy=10001 ) to find threads like these
XE on MS Windows Server 2008?
HTH
Srini

Transaction logs off on MSSQL Server-2008

Hi,
I want to off the transaction logs in mssql server-2008 like archive mode off in oracle,auto over write on in maxdb database.
Thanku

You cannot stop.!
Please read sql Architecture.
The transaction log of the SAP database records all changes made to the database. It may never be deleted and must be backed up separately. Transaction log backups save the log files. They are mandatory when you use the Full or Bulk-Logged Recovery Model since they are needed.
Read this link.
[http://help.sap.com/saphelp_nwmobile71/helpdata/en/f2/31ad41810c11d288ec0000e8200722/content.htm]
Thanks,
Siva

Installing SP3 on MSSQL SERVER 2008 with Replication

Similar Messages

Maybe you are looking for