Installing Spiceworks on 32bit Windows 2008 Server
Hi
has anyone else experienced this problem?
when Spiceworks finishes installing (using port 80) and begins it's initial startup, the application never gets past the popup window saying starting: servername:80
Any ideas how to resolve this?
Regards
Martin
This topic first appeared in the Spiceworks Community
Hi
has anyone else experienced this problem?
when Spiceworks finishes installing (using port 80) and begins it's initial startup, the application never gets past the popup window saying starting: servername:80
Any ideas how to resolve this?
Regards
Martin
This topic first appeared in the Spiceworks Community
Similar Messages
-
Install Oracle 10g on windows 2008 Server 64bit
Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11gYou mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20 -
Install error 11gR2 on Windows 2008 Server R2
Hello,
I have a question about an installation error I received on Windows 2008 Server R2 while trying to install the 11g R2 on an test machine. I had downloaded both cd's and extracted them and copied the first cd into an new directory and then tried to copy the second cd into this directory, unfortunately I didn't saw that this step failed. As I started the installation I first didn't saw any error, later the installer brought some exceptions due to missing files (oc4j, context).
I then copied the second cd again (this time it worked) and continued with the installer until it finished.
My question is now, as there are some files missing, do I have the possibility to reinstall the software and which is the best way? Must i first uninstall the software and install it again or does it work if i start the installation (i select only software) again selecting the existing ORACLE_HOME so that the installation is overwritten.
I hope you can help me with an solution for this.
Many thanks in advance to all for your help.
Regards
LuisHi,
If in one oracle home you have a successful installation, oracle will automatically deny the installation of a new software in this existing home. If you have a filed installation in some oracle home, then later you can install in the same directory as oracle does not consider this failed installation as a proper oracle home hence it overwrites everything. Even you can't uninstall this failed installation because as i told you that this is not considered an oracle home. but, better way is to run installer and see whether you have an oracle home registered in the directory in which you want to install again and if you find one, then do a deinstall. If you don't see this directory as oracle home, then still better to delete what ever is inside this directory and do the installation.
Under current scenario, your installation is fine and you should not worry.
Salman -
Error Installing Print Driver on Windows 2008 Server R2
I am getting an error installing the Xerox Print driver on Windows 2008 R2. Here is the event viewer detail. Any ideas?
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 06/24/2014 10:47:11 AM
Event ID: 215
Task Category: Installing a printer driver
Level: Error
Keywords: Printer Setup,Printer
User: SYSTEM
Computer: IHE-DEV8NEW-11V.Americas.mittalco.com
Description:
Installing printer driver Xerox ColorQube 9303 PS failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4D16-B510-42C90F6873A1}" />
<EventID>215</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>19</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000220</Keywords>
<TimeCreated SystemTime="2014-06-24T15:47:11.407265800Z" />
<EventRecordID>82</EventRecordID>
<Correlation />
<Execution ProcessID="1124" ThreadID="3836" />
<Channel>Microsoft-Windows-PrintService/Admin</Channel>
<Computer>IHE-DEV8NEW-11V.Americas.mittalco.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<SetupInstallPrinterDriver xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">
<Label>InternalInstallPrinterDriverFromPackage</Label>
<Message>pfnPSetupParseInfAndCommitFileQueue failed</Message>
<AdditionalInfo>-</AdditionalInfo>
<InfPath>-</InfPath>
<DriverName>Xerox ColorQube 9303 PS</DriverName>
<InstallSection>-</InstallSection>
<ProcessorArchitecture>Windows x64</ProcessorArchitecture>
<PackageAware>Not package aware</PackageAware>
<CoreDriverDependencies>-</CoreDriverDependencies>
<LastError>0x0</LastError>
<HResult>0x80070705</HResult>
</SetupInstallPrinterDriver>
</UserData>
</Event>
Ray PietrzakHi Ray,
On current situation, please refer to the following KB and check if set
Point and Print Restrictions policy to Disabled. Then monitor the result.
Event ID's commonly associated with point and print
restrictions
In addition, I noticed that there was a thread which you created one year ago. It seems to be similar with
current issue. However, please have a look.
Windows
2008 Server
If I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu -
Unable to Install OBIEE on Windows 2008 Server R2
I am Unable to Install OBIEE on Windows 2008 Server R2. It is giving the error
Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
But is there any patch to install the OBIEE on Windows 2008 Server R2Hi Sk
I think it might be due to compatible issue.So check the properties of the install.exe file and change the compatability to windowsxp or windows 2003 ,then try to install .I think its going to work.Because i installed OBIEE10.1.3.4 on windows server 2008.
Regards
Sandy -
Windows 2008 server OS authenticated user keeps failing
I have a new server that has windows 2008 server installed, 64-bit. I've installed oracle 11gR2 64-bit and have created my database. Now I need to create two oracle accounts that are OS authenticated and I can't seem to get this right. I've set os_authent_prefix in my spfile and I've created the user (example) OS$<domain>\<username> in the database. In Windows, the account name equals <username> and that account belongs to Administrators and ora_dba groups. I've tried creating the oracle user with <domain> in caps and lowercase, but both fail. On the server, the domain is all lower case.
So in SQL> create user "OS$my.domain.mil\user1" identified externally; (user created)
Grant connect to "OS$my.domain.mil\user1";
Log out of sqlplus, pull up command prompt in Windows 2008 server as 'user1' and type in "sqlplus /"
Invalid username or password.
What am I missing here? Any help appreciated.
SA feedback: "Finally, Windows Server 2008 R2 Operating System has a tighter security scheme than that of previous Windows OS.
Also, it would be helpful if I remove the AD domain controller role from this server. This may require reinstallation of this server (worst case). Let me know when I can do this so you can proceed with your configuration."
Edited by: wolfeet on Jun 21, 2011 5:02 PMHello Ricardo,
You may want to reference SAP Note 1054740 - SAP System Installation on Windows Server 2008
and ensure you are on SAP Netweaver 7.0 SR3 or above, and it will also tell you if the product you are installing is supported in Windows 2008 Server.
For database and SAP product combinations that are already
supported by SAP to run on Windows Server 2008, see the Product
Availability Matrix at: http://service.sap.com/pam
Also check the following: in Regedit.
SYSTEM\CurrentControlSet\Services\gpsvc
Right click on it and select "Permissions" in the context menu.
Provide "Full Control" for sidadm
Does the installation user has full administrative rights and belongs
to the group of LocalAdministrators and to Global Administrators also
when you are doing a domain installation ?
Please ensure the user <sid>adm has the access rights
to change the file system permission.
Regards,
Paul -
How to create listener in 11g RAC on windows 2008 server
Dear All,
i worked on win 2003 and linux 4, 5 too. i have installed oracle RAC on both windows and linux.
now i have installed oracle RAC11gR1 on windows 2008 server.than installed oracle software . now i want to create listener from db_home which i am facing problem.
i m starting netca from db_home. following the insturction when i finishing it , the proces get started but in the middle is showing the listener on node1 and node2 can't be created.
please guid me how i willl be able to creat it.
2nd poing how to create asm instance on RAC11gR1. is it need to install saparate home like 10g for that or i can create from 11g software home.
thanks,
sher khanthanks for the update ,
dear oracle 11g rac recomends to create ocr and voting disk on asm.
i followed the documents they are saying you have to install grid control infrastructure and than need to create asmcfs.(automatic storage management cluster file system.).
how to create asmcfs to avoid the gridcontrol, if its must is it need to install on one node or both nodes.
can you plz guide me how to do this .
thanks, -
How to install a plugin on 64 bits windows 2008 server?
From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure. -
How to install Cisco Work 3.2 on Windows 2008 Server Standard R2
Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
FaridHi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet -
Windows 2008 Server R2 - Service Pack 1 Failed to install
A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64. The update failed to install after 3 attempts using the Windows Update manager. After the third time I checked the system properties which states that SP1 is
installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully.
In update history it shows the 3 failed attempts with no successes. This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
to see if this corrects my issue. By the way what triggered the install of SP1 is random reboots of my server. This is that unknown Kernal Power Error which I have yet to resolve. Some months my server randomly reboots one time and other
months 4-5x. That is neither here nor there, the point of this discussion is to resolve SP1.
I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates. So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error Windows Update
An error has occurred. Not all of the updates were successfully uninstalled.
When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup Windows Update Standalone Installer
Installer encountered an error: 0x80073712 The component store has been corrupted.
Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
exact same results.
It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation. Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
If anyone has any suggestions please chime in and let me know what I can try. Thanks for all the support and hopefully this post will help others in the future.Maybe a little bit late, but I was running almost same problem on a exchange server.
Scenario:
First attempt to Update the windows patches - excluded the patches from the last 2 months.
I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
So the C:\ partition had less then 5 GB free disk space, and I started the updates.
All went well until Windows SP1 begun running to downloading and installing.
When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
What was the trick:
1) Stop the windows Update Service
2) C:\Windows\SoftwareDistribution\DataStore - Delete content
3) C:\Windows\SoftwareDistribution\Download - Delete content
4) Windows update Service check if its runs again
5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
I tought it will be hopefull for others to respond to this article with a solution.
Kind regards,
Alexander Tjintjelaar
Micky soft noob -
Install windows 2008 server r2 as a vm on windows 8.1 pro
I am trying to install windows 2008 server r2 as a vm on an asus I7 4th gen. on windows 8 pro. It goes
thru the install untill completing install and gives error the computer restarted unexpectedly or encountered an unxpexted error windows installation cannot proceed click ok to restart. I do the shift f10 and change the registery to force finsh the install.
It boots up but when I try to do anything. It goes into netio.sys BSOD issueI haven't run into that problem, but when setting up the OS, just
remove the NIC from the settings, do the install, make sure it's running, then install the integration
services, reboot, then add the NIC back in.
You could also use a legacy network adapter if that doesn't work.
In any case I'm trying an install of Win2008R2 right now so I can see if I get the same problem...
Bob Comer Microsoft MVP -- Hyper-V -
How to install EBS 11.5.10.2 on windows 2008 Server
Hi All,
I need to install 11i (11.5.10.2) on a windows 2008 server sp2 machine. I'm using perl 5.8.9 but running perl adautostg.pl returns this error:
Perl lib version (v5.6.1) doesn't match executable version (v5.8.9) at c:\oracle\VIS\apps\tech_st\10.1.2\perl\5.6.1\lib\
MSWin32-x86/Config.pm line 21.
Compilation failed in require at adautostg.pl line 43.
BEGIN failed--compilation aborted at adautostg.pl line 43.
The documentation says:
You must have perl 5.0053 or higher installed...
What am I missing here?
Thanks,
Konrad
Edited by: Konrad on 15.12.2010 17:11See note 986762.1 General Notes For E-Business Suite Release 11i
Installation.
* For 11i new installations: Using the Rapid Install, install all tiers (including the database tier) on a Supported Applications Platform. Then, migrate the database to the "Split Configuration Database Tier" platform.
9iR2 database to an Itanium or x86-64 database server, review "Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 9i Release 2", Metalink Document 304489.1.
login to support.oracle.com
Oracle Application Install 11.5.10.2 (11i) Microsoft Windows (32-bit) 2008Oracle Server - Enterprise Edition / 11gR2 Certified
select cerification tab--> Oracle E-Business Suit --> Application Technology -->Lifecycle Managemement
All Products > Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Then select
All Platform/Versions > Microsoft Windows (32-bit)
All Release/Versions > 11i (Application Install)
All Platform/Versions > Microsoft Windows (32-bit) > 2008
you can find all certifications. -
CF9 install on Windows 2008 Server R2
Hi everyone I've installed Cold Fusion 9 on my windows 2008 Server r2 box and everything appears to be configured correctly becuase I can get to the Cold Fusion 9 Administrator page just fine. I've looked within IIS 7.5 and it's recognizing the .cfm file I think becuase it's an option under default documents. However I try to view the file from the local host I get a error 500.0.
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
AboMapperCustom-77246
Error Code
0x800700c1
I have no idea what that mapper is or what it's supposed to do so if anyone could help me out I would be eternally grateful! Why oh why couldnt cold fusion 9 have native IIS support in it.
UPDATE
Apparently this error 500.0 gets applied to all my sites within IIS 7.5. Not just the one I intend to use .cfm files on. When I go into the web configuration tool and remove the configured webservers and restart everything goes back to normal but the .cfm files throw a 404.3 not found error for the following module.
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032Hi
Windows Server Core edition is not listed as supported platform:
http://www.adobe.com/products/coldfusion/systemreqs/
HTH, Carl. -
Install Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit
Hi All,
Good Morning. I am working as Oracle APPS DBA. I had a requirement for installing Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit machine.
I need this Application server for Vertex O-Series which is working with SQL Server as the database.
Can any of you guys help me in providing the document or steps in order to install this application server?
1. Pre-Requisties steps
2. Installation
3. Post steps
I apperciat your help in this.
Thanks,
Srinivas.Hello.
We are at the same point too.
Anybody here install the Vertex O series 6 running on the Java Stack? if so, what NW release and what component?
We are currently running an older version on SAP NW640 JAVA with no issue, and I am making the assumption the new Vertex would be running on the same SAP java AS for 7*... maybe not?
The install documents from Vertex say the requirement for SAP is:
"SAP NetWeaver 7.1 with Service Pack 3 or higher" and I see that there is only 7.1 for PI and Mobile.
(Maybe they mean SAP NW 7 SP3?)
We did ask Vertex, the company, about running this on the java app and they wrote:
"Netweaver 7.1 is currently supported for deployment of O Series 6.0. Versions 7.0 and 7.3 of Netweaver are not supported.
O Series 6.0 is supported for use with Java 1.5 and Java 1.6. "
Thanks for your help. And I will post here again if I find my answer. -
Install and uninstall of Oracle 11g R2 on Windows 2008 Server
Hi,
I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
[5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
Questions:
What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
What do I need to do to ensure a re-install is successful?
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11
Maybe you are looking for
-
Cannot load PDF in IE when Adobe Reader 9.3 is installed
Hi, I have been having a problem for the past couple months whereby when I have Adobe Reader 9.3 installed on my machine and try to open PDFs within IE, I receive an error message (after some time of waiting) saying "There is a problem with Adobe Acr
-
JIN6 -A/R VAT is in Disable mode in the FTXP
Hi all, I defined new Pricing procedure by copying standard JFACT procedure for the new company code. In that I maintained JIN6 condition type for A/R VAT, same condition available in my tax procedure TAXINJ but when I go to maintain new Tax code thr
-
I just received a powerbook G3 and I'm trying to figure out what I can/should upgrade. I know very little about what I'm doing, and I'm hoping someone can help point me in the right direction. My goal is to get on the internet and do email. My questi
-
end yes i got the macbook summer 2006 still working and sharp, got this problem, CSRUSHBBluetoothHCIcontroller: setupHardware super returned 0, invalid node structure (4,14279), and it shut down im thinking of open it up and check the bluetooth chi
-
WebAS - invalid property value
Hi, I started to apply SP11 to WebAS 6.4 SP9 and now having problems starting the dispatcher-process. The developer-trace shows two errors: error => Invalid property value [box.number/J2EJC00MC00009304] [jstartxx.c 808] error => Invalid property valu