Installing SQL server for SCCM 2012 local vs on its own server (primary site enviorment only)
Hello,
When building a primary stand alone site server does Microsoft consider it best practice to install sql locally or on its own server. Is there an official statement from Microsoft suggesting this?
Thanks ins advance
Phil
Phil Balderos
There is no official statement either way from Microsoft as both configurations are fully supported. Generally speaking, it is easier to collocate SQL on the same system as the Primary Site so long as the server meets the hardware recommendations.
Among the trade-offs are reduced network traffic vs avoiding a single point of failure for the site itself. Since the CM site license also includes the license for SQL, licensing is not really an issue.
Similar Messages
-
Hello,
I'm very new to SQL concepts, I have recently installed a backend database for SCCM application with below configuration.
Installed the SQL on VM with 10GB RAM, 50GB(OS Partition), 400GB (SCCM DATA & SQL DATA) and 50GB (SQL Logs)
OS: WIn Server 2012 R2
SQL : SQL Server 2012 SP1 Std
Question: I want to know,how to configure the following things,
01. Limit memory utilization of SQL (Min & Max)
02. limit the maximum size of the log files
03. Limit Disk utilization for SQL etc...Hi Julie,
My friend Jorge Segarra has a blog about min and max memory that I'd recommend you look at. http://www.sqlchicken.com/2012/02/setting-memory-limits/
the best answer is "it depends", you want to define an amount other than the default. by default SQL Server installs with 2 TB of memory enabled regardless of what is on the source system.
With SCCM and 500 GB data files, you will probably find you have memory pressure with only 10 GB. I would leave a minimum of 1 GB per for every 4 dedicated to the OS, up to 4 GB for the OS. So in your case,
8 GB for SQL 2 GB for the OS. If you can add more for the VM that would be a good idea. Typically you would want 3 x your largest returned dataset in a query. When you do a checkdb or index rebuilds your memory with get thrashed.
Log files, make sure your database is in simple recovery model. Understand the type of backups you need to maintain transnational consistency. Grow them at a minimum of 4 GB increments. Transaction logs
are made up of VLF's and VLF fragmenation will cause slower writes on write heavy systems like SCCM. Here's a great blog for more on VLF's http://blogs.msdn.com/b/blogdoezequiel/
Disk limitation should be based on size. I like 100 GB of free space or 20%, whichever comes first. This will be determined by the amount of history you want to maintain though.
Convert DTS to SSIS |
Document SSIS |
30+ SSIS Tasks |
Real-time SSIS Monitoring |
Quick Starts |
BI Blitz -
Dear All,
I want to ask about installing SCCM on Windows Server 2012, whether
it should be installed on
the Domain Controller
Server? Then, is it
okay if not installed on
a Non-DC? Can
anybody give the reason?
Please enlightenment.
Thank You.Hi,
Although, SCCM 2012 can be installed on a DC, but it is not recommended configuration. I suggest you install it on a domain-joined server.
Please see the Supported Configurations for Configuration Manager
http://technet.microsoft.com/en-us/library/gg682077.aspx
Juke Chou
TechNet Community Support -
Sql 2012 server for SCCM 2012 - Agent not starting
Hi ,
In our environment we have a Sql 2012, and it was working fine till now. but after installation of RDP role and subsequent installation of certificates for remote desktop in the SCCM server ( SQL 2012 is
installed in it)
we are facing the issue - Sql server management studio not connecting ( windows authenticaltion)
1) A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)A
2) I tried starting the sql agent service in services.msc and the below error came
The SQL Server Agent (MSSQLSERVER) service on Local Computer started and then stopped.
Some services stop automatically if they are not in use by other services or programs.
3) In the Sql Server configuration manager also tried starting the sql agent but
The request failed or the service did not respond in a timely fashion.
Consult the event log or other applicable error logs for details.
The widows event logs show this error
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection.
The TLS protocol defined fatal error code is 20. The Windows SChannel error state is 960.
We have removed the certificate and the RDP role in that .
Can anyone please help on this
Anand MI would check for error messages in the SQL Server ERROLOG file and also Agent's SQLAGENT.OUT file.
Tibor Karaszi, SQL Server MVP |
web | blog -
SQL Ports For SCCM 2012 (Stand alone Server)
Is there any reason to open port 1433 and 4022 if the SCCM server is a stand alone? It keeps displaying the error in the monitoring tab if i don't open the ports. The SQL and SCCM are on the same server.
I have seen this error even when the ports are open.
If you get that problem then there isn't a workaround and you have to put up with the error. There is a open call with at Microsoft Connect about this but I don't think there is any progress on it.
https://connect.microsoft.com/ConfigurationManagervnext/feedback/details/1045929/hierarchy-monitoring-detected-that-the-configmgr-sql-server-fqdn-ports-1433-4022-are-not-active-on-firewall-exception
P.S. You need a connect account and be a member of the Configmgr program to be able to view this.
Cheers
Paul | sccmentor.wordpress.com -
Any major changes to the database for SCCM 2012 and Reporting?
I'm in the process of migrating my custom reports from SCCM 2007 to SCCM 2012. I wonder if all the tables / views in SCCM 2007 are the same in SCCM 2012 for my reporting purposes? So far everything I've migrated over appears to work without a problem.
Orange County District AttorneyYes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
The SQL schema for SCCM 2012 has been released here.
https://technet.microsoft.com/en-us/library/dn581978.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
How to Custom Report using sql server report builder for SCCM 2012 SP1
Hi ,
I am new to database, if i want to create a manual report using sql server report builder for SCCM 2012 SP1, what step should i take.
i want to create a report in which computer name, total disk space, physical disk serial no come together. i already added class (physical disk serial no.) in hardware inventory classes. refer snapshotHi,
Here is a guide on how to create custom reports in Configuration Manager 2012, it is a great place to start, change to the data you want to display instead.
http://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
SQL 2012 Enterprise SP1 installation for SCCM 2012 R2
I am just starting to install SQL 2012 with SP1 Enterprise for SCCM 2012 R2.
Does anyone have a step by step guide for this install please
I am planning to install SQL 2012 with SP1 Enterprise as a physical install which I intend to geo cluster later on
Also I am thinking of installing WSUS on a separate server and get my SCCM 2012 servers (1 primary and 3 secondary) to use this server - would appreciate some help on how this can be setup as wellThat doesn't make sense to me. Both versions are fully supported on virtual and physical platforms.
Also, I'm with Garth - local SQL all the way.
Here are my thoughts on the subject
http://www.gerryhampsoncm.blogspot.ie/2013/10/configmgr-sql-some-tips.html
ConfigMgr is not a real-time product like Exchange, for example. A certain amount of downtime can be tolerated. I would spend more time implementing a robust backup solution, rather than trying to implement high availability.
You should be able to recover a ConfigMgr site from SQL backup in a couple of hours.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Unable to install Cumulative Update 2 for SCCM 2012 R2
Hi,
I am trying to install the CU2 update for SCCM 2012 R2 and I am getting the following error during prerequisite checks:
Server update status: This update applies to product version 5.0.7958. The installed version on this computer is 5.0.7804.1000. This update is not applicable to this computer.
Console update status: No serviceable configuration manager role was found on the local system.
Can anyone provide me some guidance or thoughts on how to get to the correct version to install this update?
Thank youYou are running
ConfigMgr 2012 SP1 – 5.00.7804.1000 - build 7804
The CU2 you are trying to apply is for SCCM 2012 R2.
http://www.systemcenterdudes.com/sccm-2012-version-numbers/
For SP1 the latest CU is CU5 : http://support.microsoft.com/kb/2978017/en-us
Benoit Lecours | Blog: System Center Dudes -
Using a custom certificate store for SCCM 2012 clients and primary site server
I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
difference between two valid certs that have the same purpose as long as they are trusted. "
that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
Once I started using the CCMCERTISSUERS
switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
deployment will fail, just as my pilot did.
About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
Thanks Jason for your post and discussion. -
SCCM 2012 SP1 with remote WSUS on Server 2012 and SQL Server 2012
I am rebuilding my SCCM 2012 lab on Server 2012 R2 x64 OS now.
I have 1 primary site, remote SQL server 2012, and remote WSUS server.
Is the WSUS console still required on my primary site running server 2012? If so are the below the correct steps to get this working?
Install Console on primary server:
Go to Server Manager à Add Roles and features, Navigate to the features section.
Remote Server Manager tools
>Role Administration Tools
--Select Windows Server Update Services Tools Only
Are there any post hotfixes to install?
Intalling WSUS full version on remote server:
Go to Server Manager à Add Roles and features, Server Roles section.
Windows Server Update Services
Do I need to select this as well on the remote wsus server? >Role Administration Tools -Select Windows Server Update Services Tools Only
Since my SQL server is on a remote server do I select the below only?
Are there any post hotfixes to install?Hi,
One Part of the question is already answered. The second part is: If you want to use a remote SQL Server you need to select exactly what you selected in your screenshot.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de -
Hi,
We try to install sccm 2012 serondary site in server 2012. It always failed.
I used the rereqchek tools to check system enviroment locally. All passed.
The primary site installed in server 2012. Both server had granted the administrator permission.
Anyone can help to check the below Configmgrprereq.log
<01-16-2015 08:47:55> ********************************************
<01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
<01-16-2015 08:47:55> ********************************************
<01-16-2015 08:47:55> Commandline :
"D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
<01-16-2015 08:47:55> Check Type: Secondary site
Site Server: DPServer.ms.com,
SQL Server: DPServer.ms.com,
SQL Named Instance: ,
Install Folder: d:\Program Files\Microsoft Configuration Manager\,
Setup Source Folder: D:\SCCM2012\Source
<01-16-2015 08:47:55> INFO: Executing prerequisite functions...
<01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
<01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
<01-16-2015 08:48:08> DPServer.ms.com; Site server computer account administrative rights; Error; Configuration Manager Setup requires that the site server computer has administrative rights on
the SQL Server and management point computers.
<01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
<01-16-2015 08:48:22> DPServer.ms.com; Check Server Service is running; Passed
<01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
<01-16-2015 08:48:30> DPServer.ms.com; Unsupported site server operating system version for Setup; Error; Configuration Manager site systems can only be installed on systems running Windows Server
2008 SP2 or later.
<01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
<01-16-2015 08:48:34> DPServer.ms.com; Domain membership; Error; Configuration Manager site server components must be installed on computers that are members of a Windows domain.
<01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
<01-16-2015 08:48:40> DPServer.ms.com; Free disk space on site server; Passed
<01-16-2015 08:48:47> DPServer.ms.com; Pending system restart; Passed
<01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
<01-16-2015 08:48:50> DPServer.ms.com; Read-Only Domain Controller; Passed
<01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
<01-16-2015 08:48:50> DPServer.ms.com; Site Server FQDN Length; Passed
<01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:48:57> DPServer.ms.com; Microsoft XML Core Services 6.0 (MSXML60); Warning; MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
<01-16-2015 08:49:03> DPServer.ms.com; Microsoft Remote Differential Compression (RDC) library registered; Error; Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
<01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
<01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
<01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
<01-16-2015 08:49:19> DPServer.ms.com; Microsoft Windows Installer; Error; Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
requirement. Configuration Manager requires at least Windows Installer version 4.5.
<01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
<01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
<01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
<01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
<01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
<01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
<01-16-2015 08:49:49> DPServer.ms.com; SQL Server Express on Secondary Site; Error; A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
<01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
<01-16-2015 08:49:55> DPServer.ms.com; Existing Configuration Manager server components on site server; Error; A site server or site system role is already installed on the computer selected for
site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
<01-16-2015 08:49:55> DPServer.ms.com; Firewall exception for SQL Server (stand-alone primary site); Passed
<01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
<01-16-2015 08:49:55> INFO: SQL Server named instance <>
<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
<01-16-2015 08:49:55> DPServer.ms.com; SQL Server service running account; Passed
<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
<01-16-2015 08:49:55> DPServer.ms.com; Dedicated SQL Server instance; Passed
<01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
<01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
<01-16-2015 08:49:55> DPServer.ms.com; Parent/child database collation; Passed
<01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
<01-16-2015 08:50:05> INFO: .NET is installed
<01-16-2015 08:50:05> DPServer.ms.com; Minimum .NET Framework version for Configuration Manager site server; Passed
<01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
<01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
<01-16-2015 08:50:10> INFO: .NET is installed
<01-16-2015 08:50:11> DPServer.ms.com; Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site; Passed
<01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
<01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
<01-16-2015 08:52:29> DPServer.ms.com; Setup Source Version; Error; The product version in the source folder specified for secondary site installation does not match the version of the primary site.
<01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
<01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:52:55> DPServer.ms.com; Setup Source Folder; Error; The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
<01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
<01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
<01-16-2015 08:52:55> DPServer.ms.com; SQL Server on the Secondary Site Computer; Passed
<01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
<01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
<01-16-2015 08:53:04> DPServer.ms.com; Primary FQDN; Passed
<01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
<01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:53:30> DPServer.ms.com; Verify site server permissions to publish to Active Directory.; Warning; The site server might be unable to publish to Active Directory. The computer account
for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
<01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
<01-16-2015 08:53:44> DPServer.ms.com; Remote Connection to WMI on Secondary Site; Passed
<01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
<01-16-2015 08:53:44> INFO: LangID <409>
<01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
<01-16-2015 08:53:44> DPServer.ms.com; Required SQL Server Collation; Passed
<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server sysadmin rights; Passed
<01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server sysadmin rights for reference site; Passed
<01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server security mode; Passed
<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server version; Passed
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server Edition; Passed
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server Tcp Port; Passed
<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
<01-16-2015 08:53:44> DPServer.ms.com; Configuration for SQL Server memory usage; Passed
<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server process memory allocation; Passed
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
<01-16-2015 08:53:44> DPServer.ms.com; Case-insensitive collation on SQL Server; Passed
<01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
<01-16-2015 08:53:44> INFO: getaddrinfo returned success.
<01-16-2015 08:53:44> DPServer.ms.com; Validate FQDN of SQL Server Computer; Passed
<01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:53:44> DPServer.ms.com; Administrative share (Site system); Passed
<01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
<01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
<01-16-2015 08:53:44> DPServer.ms.com; Site System to SQL Server Communication; Passed
<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
<01-16-2015 08:53:52> DPServer.ms.com; Unsupported management point operating system version for Setup; Warning; Configuration Manager site systems can only be installed on systems running Windows
Server 2008 SP2 or later.
<01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
<01-16-2015 08:54:05> DPServer.ms.com; Windows Failover Cluster; Passed
<01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:10> DPServer.ms.com; IIS service running; Warning; Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
requires IIS. Install IIS on the site system to continue setup.
<01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
<01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
<01-16-2015 08:54:39> DPServer.ms.com; BITS installed; Warning; Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
<01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
<01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
<01-16-2015 08:55:08> DPServer.ms.com; BITS enabled; Warning; Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
<01-16-2015 08:55:08> DPServer.ms.com; IIS HTTPS Configuration for management point; Passed
<01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
<01-16-2015 08:55:08> DPServer.ms.com; Firewall exception for SQL Server for management point; Passed
<01-16-2015 08:55:08> DPServer.ms.com; Administrative rights on management point; Passed
<01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
<01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:55:36> DPServer.ms.com; Client Version on Management Point Computer; Warning; You cannot install the management point on a computer with an earlier version of the Configuration Manager
client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
<01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
<01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:55:49> DPServer.ms.com; Unsupported distribution point operating system version for Setup; Warning; Configuration Manager distribution point can only be installed on systems running
Windows Server 2003 or later.
<01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:55:57> DPServer.ms.com; Microsoft XML Core Services 6.0 (MSXML60) for distribution point; Warning; MSXML 6.0 or later libraries are required for Configuration Manager console and
Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
<01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:57> DPServer.ms.com; IIS HTTPS Configuration for distribution point; Passed
<01-16-2015 08:55:57> DPServer.ms.com; Administrative rights on distribution point; Passed
<01-16-2015 08:55:57> ***************************************************
<01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
<01-16-2015 08:55:57> ***************************************************
<01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
<01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
<01-16-2015 08:56:09> INFO: Setting registry values
<01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.<01-16-2015 08:48:08> DPServer.ms.com; Site server computer account administrative rights; Error; Configuration Manager Setup requires that the site server computer has administrative rights
on the SQL Server and management point computers.
Actually the administrative permission had been granted. -
Configuring Reporting services for SCCM 2012
Hi,
I just finish create SQL reporting services ( configure Database, report manager URL) in SQL 2008 R2 for SCCM 2012. When I open the Report option in SCCM console (Monitoring --> Report), no report listed there and then I try to add in Reporting service
point for it, but get an error message
"There is a problem connecting to the specific reporting server. Please check the connection and make sure SQL reporting service is running on the specified server"
I manually browse to http://sqlserver/reportserver or
http://sqlserver/reports , that is no any folder exist there (I assume when I configure reporting service it will automatic create a folder for it with all report inside?). Anyone can guide me on how to solve this issue?
Regards,Hi,
hi ,
I am new to SCCM 2012 group and i have knowledge on sccm2007. i want to discuss some issue what i have with SCCM2012 installtion. The issue is my machine got rebooted while installing sccm 2012 SP1.i have already installed all the prerequisites for SCCM2012.i
am installing sccm2012 on Hyper-V machine.
Please see my system configuration below:
DomainController(2008R2 server) : 512MB RAM, AD things and DNS ,DHCP has installed on it.
System center server(2008R2) : 1028MB RAM , Sql 2008 server installed on it.
i tried to install it many times but still i got the same issue.
Could anybody please help me with this ?
This is a new question. So please ask this question on a new thread in this forum.
Thank you.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . : home
Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
IPv4 Address. . . . . . . . . . . : 192.168.1.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
IPv4 Address. . . . . . . . . . . : 10.192.1.25
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
IPv4 Address. . . . . . . . . . . : 10.192.1.30
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initializedHi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support
Maybe you are looking for
-
Powerbook monitor died...how do i recover files?
I have a powerbook titanium and the monitor has died. It would cost like 400$ to replace the monitor so i bought a new macbook. how would i go about getting my data in the harddrive out? I was thinking two solutions 1) remove hardrdive put it in a id
-
Text selection problem in linked containers
Hi, I get a strange behavior on the selection of text in a textFlow with several linked containers (from the latest SVN version it seems). The problem occurs on the following case: http://lafabrick.com/labz/tlfTest/ (source code enabled) If I select
-
Windows Media Player suddenly not working- using wrong bit..?
This is the error msg I get when trying to start windows media player: "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64
-
Dear sap Gurus kindly solve my problem..... i have done the P.O with 100 line items after that i have done the multiple GRs against the same P.O now i am try to do the MIRO but here 4 line items not appear in Invoice wich are 61, 62 , 80,82, remai
-
Hi: How to move a package to production? What i did was copy the contents of the package from the dev to a file then run this file in production, correct? The developer said i should copy. What does that mean? Thx, QAQA