Installing SSD Drive - SATA 3 connection not working
Trying to install a new Samsung EVO 850 SSD Drive. The motherboard is MSI MS-7778 (Jasmine). I can get it to work on the white, dark blue, and light blue SATA connections. The yellow SATA connection (I think labeled SATA 3) does not work. It does not work when I connect it to anything in the computer. I need all four connections. Two hard drives and the DVD reader are already using the white, dark blue, and light blue SATA connections.Does anyone know how to get the yellow SATA connection (SATA 3) to work?Thanks! It's been a long night....
Thanks for the suggestion. I too had noticed the motherboard diagram. I tried and tried all three SATA connections over and over again with no progress. I tried everything I could think of. Changed wires, checked the BIOS, etc.I was just ready to give up when my wife received a call from the Microsoft store notifying her that the install of Windows 10 on her laptop was done. She put the computer tech on the phone, I described the problem and he suggested that I try what I had been contemplating - reinstalling Windows 10 all over again. So I plugged in the SSD drive, both regular hard drives and said to myself, "After this many hours, I've got nothing to lose!" Reinstalled Windows 10 from my USB flash drive and everything worked like a charm. I couldn't believe it!It appears Windows 10 reads your entire hardware configuration on the initial install through the Internet. Which takes forever!Windows 10 doesn't like changes. So those of us who like to upgrade our computers with new SSD drives, memory, etc. are going to have to re-learn how to do it. It used to be so easy! Learning Windows 10 and how it reacts to new hardware configurations certainly sucked up many hours of my time!Thanks for the on-point advice.
Similar Messages
-
Ethernet driver for WXP is not working on Satellite A100
Satellite A100-784 PSAANE-02L011G3 ethernet driver for wxp is not working. Can not properly install driver, downloaded all possible drivers and still not working.
In device manager yellow sign. I have bought my laptop with Vista BASIC and I put XP-SP2. Country is Croatia! Help me please!Hi
I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
If you want you can download and install the Lan driver from the Intel page:
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
There you will find the drivers for the Intel 8256x Ethernet Controllers
Bye -
I have brought a iPhone 5s and installed software but my bluetooth is not working. Please help me
What are you trying to connect the iPhone to and what is happening when you try?
-
Could not find an installed JDK, SCM Java Tools may not work until registry
Hello all,
I've downloaded the latest full version of Designer (10.1.2.3), but getting installation error: Could not find an installed JDK, SCM Java Tools may not work until registry
Any solution?3. install the Designer 10.1.2.3 patch to the Developer suite home.When I try to do this at C:\oracle\product\Ora10gDSR2, I get a message OUI-10137: An Oracle Home with name OUIHome already exits at C:\OraHome (a directory that doesn't exist) please specify another name for Oracle Home.
I don't want to just specify another name because cleaning up these faulty installations requires deleting registry keys, etc, since the deinstall does't really remove everything sufficiently to start with a clean slate.
I also got the Java JDK message because the JDK 5 is no longer being put straight onto the C drive, it is buried in C:\Sun\SDK\jdk, so some java programs have to be pointed to it. The Oracle installer doesn't provide this option.
Also, Michael, your post, "Re: Designer 10.1.2.3 on windows Xp Posted: Oct 20, 2007 7:05 AM in response to: mmehdi" is full of unreadable characters and question marks. Maybe I don't have a font you are using. There are also references to a zip file and a Word document that aren't there.
Anyway, thanks for all your time and effort,
Edward -
i can't open my itunes , i tried to delete it and install it back already but still not working , please help
No , it is something crushed in my computer ? i keep re-download it and tried to download some old version itunes my computer is a Window 7 . i can't backup my iphone and ipad now pleses help , thank you
-
I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import menu and nothing has changed. I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card. Any thoughts?
The error message probably said "unsupported or damaged"
The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly. -
For the past 2 weeks I have not been able to open any small video on facebook or on the yahoo page . I have installed Adobe and it still dies not work. Help.
Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs -
Why the italic function doesn't works in my Pages? I have already installed the actualization and it keeps not working...
drag the other clip 'over' the main clip
the 2nd clip has to be selected/yellow border...
then you're prompted in the Inspector with the several options... -
Camera connection not working with my camera
Camera connect not working with my Sony boggie camera
The Bloggie will not work because it draws too much power from the USB port on the iPad. The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory. Works fine with my 3D Bloggie.
-
Hello, my itunes app is getting shut down every time I want to open it.
I don't know if it's related but ever since I downloaded the last two updates. I tryed reparing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes up and running. Does anybody know how to fix this?Hi Vero Torres,
If you are having issues with iTunes unexpectedly quitting on launch after on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden -
How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?
On trying to open month of March 2013 the pre-installed calendar just shuts down and closes. Have tried restarting iPad but this didn't help and because its a pre-installed App am unable to re-install it. Is this a universal problem or just affecting me? Tried searching for support in both App Store and on Apple site and can't see how to report this.Feedback
http://www.apple.com/feedback -
After i install Visual-Studio 2013 crystal-report not working
hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
X-Fi Titanium PCI Express front pannel connection not working
<font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
<font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
Best of luck and .......
Message Edited by jmacguire on 07-06-2009 :09 PM -
[SOLVED] Laptop SATA drive on desktop computer not working
Hey guys,
My acer laptop crashed few days ago and I'm trying to recover the data off its SATA harddisk on my gf's desktop computer. I don't know why, but I get a lot of errors at startup.
dmesg:
Adding 2024180k swap on /dev/sda3. Priority:-1 extents:1 across:2024180k
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 4:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 0
__ratelimit: 6 callbacks suppressed
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 4:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata5: EH complete
I get the following output with hdparm:
$ sudo hdparm -I /dev/sdb
/dev/sdb:
ATA device, with non-removable media
Model Number: WDC WD2500BEVS-22UST0
Serial Number: WD-WXE507A05038
Firmware Revision: 01.01A01
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 488397168
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 238475 MBytes
device size with M = 1000*1000: 250059 MBytes (250 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 1
Advanced power management level: 128
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
SMART feature set
* Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
enabled
locked
not frozen
not expired: security count
not supported: enhanced erase
Security level high
92min for SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee2559ab684
NAA : 5
IEEE OUI : 0014ee
Unique ID : 2559ab684
Checksum: correct
Note that the drive is password protected. If I use 'hdparm --security-disable' with my known password, it fails with the following error:
$ sudo hdparm --security-disable password /dev/sdb
security_password="password"
/dev/sdb:
Issuing SECURITY_DISABLE command, password="password", user=master
SECURITY_UNLOCK: Input/output error
If I try this for few times, the security count expires.
I see three problems that it could have:
- my hdparm/system/whatever does not fully support the drive; maybe the password cannot be accepted?
- maybe the password used by the laptop bios was filled with other characters after my typing: spaces?
- not the password is the problem, but getting information from the drive: not supported by this system?
I assume dmesg is the key, but I can't interpret it. I hope someone could tell me what should I verify/do further, I have no idea what to test anymore.
Last edited by akephalos (2009-08-30 11:27:42)djszapi wrote:Is it a crypted system ? Can't you boot into it from livecd neither ? What did you do immediately before when this error started to occur ?
No, it is not encrypted. Just as an information, it contains 4 partitions: sdb1=NTFS, sdb2=ext4, sdb3=swap, sdb4=ext4.
This error did not occur when I was using it on my laptop, but I took the HDD out and mounted it in my girlfriend's computer, she has another Arch installed there, so I don't meed to boot from this disk, just to be able to read it. The password is a disk password - hardware probably, not for encrypted partitions. I could not disable the password because the original laptop doesn't start anymore, and the BIOS settings on this desktop computer does not support HDD password, but only System password.
So, if the HDD had no passwod set, I could tell you if the reading problem comes from some incompatibility issues, but as for now, I can't tell where it comes from, because I need to deactivate its security with hdparm --security-disable first. But this actually looks to not work, or something.
I'm thinking that the mianboard doesn't support this HDD directly connected, the things I'll do next week are:
- buying an external HDD 2.5 rack
- plug it in the USB
- try again hdparm and anything required to make it read.
If this fails, too, probably the only remaining solution is to find someone with an Acer laptop to put this HDD inside and backup my data, or at least deactivate the pass from the bios setings.
Btw, I think this is something worth mentioning to warn the users in general: this Acer 5520G was of very poor quality, things began to crack right after the one year guarantee expired, beginning with the DVD-writer. -
How do I install a SSD drive - the Bios does not allow changing to AHCI mode
I have a Windows 7, HP ENVY approx 1.5 years old. I want to install an SSD drive, however the BIOS seems to be locked, or does not include options to change the SATA connection to AHCI or RAID.
How does one unlock the BIOS, or change the sata settings to allow an SSD drive to be installed?Hi:
AHCI is enabled by default on today's HP consumer notebooks.
Nothing can be done to actually see a setting, or change the setting to anything other than AHCI etc.
Paul
Maybe you are looking for
-
How to change default program...?
In the Finder I have changed the default program for eps-files to Photoshop instead of Illustrator. However, Bridge keeps opening eps-files in Illustrator... I know I can ctrl-click and choose Open with... but I would like to change the default progr
-
How can I add more than 4 users in ichat?
I am frustrated that I can only host four (three plus me) guests in a video chat. Does anyone know a way to overcome this limitation? Neither me nor my co-workers lack processor speed nor network speed! Thanks! Chuck
-
Background images for a portlet
Hi, Is it possble to have a background image for a portlet only, In particular I need to include the login portlet in a region but have the background of the portlet based on an image file. Thanks in advance, Brandon
-
Those who have been around awhile are well aware of the FAQ threads. In the new forums there are many different ways to browse the discussions and the FAQs may no longer be visible in an obvious place. Could this be part of the reason we see so man
-
Hi thank you for reading my post what more features will oracle add to Jdeveloper 10.1.3.1.0 ? which area is concerned more ? is there any estimation about its release date ? Thanks