Installing ST-A/PI Addon : "OCS package SAPKITAB9L does not match the current software component vector"

Dear Gurus,
When i try to install ST-A/PI Addon from SPAM and select queue : OCS package SAPKITAB9L does not match the current software component vector
My downloads ;
1 - SAPKITAB9J ==> CSN0120061532_0073055.PAT  (ST-A/PI , 01Q_731 , Package Level=0000) downloaded from
ST-A/PI 01Q_731 (INSTALLATIONS AND UPGRADES)
2 - SAPKITAB9K==> CSR0120031469_0081131.PAT  (ST-A/PI , 01Q_731 , Package Level=0001) downloaded from
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
3 - SAPKITAB9L==> CSR0120031469_0076956.PAT   (ST-A/PI , 01Q_731 , Package Level=0002)
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
I placed them under EPS and uploaded succesfully when i "Load Packages" from " "from Application Server"
What could be problem ?
Here is system components ;
SAP_BASIS
740
0005
SAPKB74005
SAP Basis Component
SAP_ABA
740
0005
SAPKA74005
Cross-Application Component
SAP_GWFND
740
0005
SAPK-74005INSAPGWFND
SAP Gateway Foundation 7.40
SAP_UI
740
0006
SAPK-74006INSAPUI
User Interface Technology 7.40
PI_BASIS
740
0005
SAPK-74005INPIBASIS
Basis Plug-In
ST-PI
2008_1_710
0007
SAPKITLRE7
SAP Solution Tools Plug-In
BI_CONT
757
0001
SAPK-75701INBICONT
Business Intelligence Content
BI_CONT_XT
757
0001
SAPK-75701INBICONTXT
Business Intelligence Content for Bobj I
SAP_BW
740
0005
SAPKW74005
SAP Business Warehouse
CPMBPC
801
0005
SAPK-80105INCPMBPC
CPM Business Planning and Consolidation
POASBC
100_731
0005
SAPK-10205INPOASBC
POA Shared Business Components

in 000 client but now i am getting DUMP ;
Category               ABAP Programming Error
Runtime Errors         CALLBACK_REJECTED_BY_WHITELIST
ABAP Program           SAPLSTPA
Application Component  BC-CTS
What happened?
    An RFC callback has been prevented due to no corresponding whitelist
    entry being configured. The original RFC called function module "RFC_TP" in
    the target system with destination "CALLTP_WindowsNT". The callback called
     function
    module "TRINT_PROGRESS_INDICATOR" in its own system.
Error analysis
    Function module "RFC_TP" was called. This execute an RFC callback via ABAP
    statement CALL FUNCTION 'TRINT_PROGRESS_INDICATOR' DESTINATION 'BACK'
    . This action resulted in this ABAP short dump.
    This action was triggered explicitly by the application in transaction
    "SAINT               " and in ABAP main program "SAPLSAINT_UI".

Similar Messages

  • OCS package SAPKITAC4E does not match the current software component vector

    Hello Experts,
    I am running EHP4 upgrade on ECC system, I have downloaded files from MOPZ, I got an error message in PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION, error is as follows,
    Last error code set: Unable to generate addon queue. Return Code = 1, Reason = "OCS package SAPKITAC4E does not match the current software component vector", check log file 'SPDA_EHP_INCLUSION.LOG' for details
    As per the log 'SPDA_EHP_INCLUSION.LOG' it is looking for BBP CRM patches, error message is as follows,
    3 ETN490 Use the Add-On installation package "SAPKITAC4E" (type &4"AOI") for Add-On &2"ST-A/PI" rel.&3"01M_CRM570"
    3 ETN245 The following import prerequisites of OCS Package "SAPKITAC4E" have not been met:
    3 ETN264   In the (alternatively) Requirement set "01":
    3WETN491 Required software component "BBPCRM" rel."500" is not installed
    3 ETN264   In the (alternatively) Requirement set "02":
    3WETN491 Required software component "BBPCRM" rel."510" is not installed
    3 ETN264   In the (alternatively) Requirement set "03":
    3WETN491 Required software component "BBPCRM" rel."520" is not installed
    3 ETN264   In the (alternatively) Requirement set "04":
    3WETN491 Required software component "BBPCRM" rel."600" is not installed
    3 ETN264   In the (alternatively) Requirement set "05":
    3WETN491 Required software component "BBPCRM" rel."700" is not installed
    3 ETN264   In the (alternatively) Requirement set "06":
    3WETN491 Required software component "BBPCRM" rel."701" is not installed
    2WETN543 OCS package "SAPKITAC4E" does not match the current software component vector
    1 ETN214X."**************************************************"
    1 ETN251   End of phase: "'Add-on Queue Calculation'"
    1 ETN254       End date: "02.08.2011"
    1 ETN255       End time: "23:30:08"
    1 ETN214 ."**************************************************"
    BBP CRM is not installed in our ECC system, I am not sure why it is required.
    Can you please advise me how to move forward without installing BBPCRM.
    Regards,
    Fazil

    If someone one found the following errors during SAP ECC6-EHP6 implementation with Software Update Manager:
    1:
    Error message set: 'Unable to generate addon queue. Return Code = 1, Reason = "Extended attribute STACK_XML_REQUIRED for SAPK-100AHINUI2FND is unknown"
    Solution:
    Please update the SPAM/SAINT version with latest available at OSS site, then restart the implementation with INIT option.
    2:
    Error message set: 'RFC error system DEV nr 00 function 'SPDA_READ_NEW_PACKAGES' failed with code 3 key CALL_FUNCTION_NOT_FOUND: Function module "OCS_CHECK_PATH_CONSISTENCY" not found.
    Restart the Software Update Manager and SAP instance. If possible then update SAP Kernel with latest available patch, R3trans and tp as well.
    Regards.

  • OCS package SAPKITL437 does not match the current software component vector

    I am trying to apply SAPKB70108 in SOLMAN 7.1 ehp1. SPAM=KD70143, got error OCS package SAPKITL437 does not match the current software component vector
    Lalit Kumar

    I have posted single time but due to internet problem, I clicked two times and the same posted twice.. I want to delete one but haven't find delete option...
    Lalit Kumar

  • Upgrade to EHP4: OCS package SAPKE60002 does not match the current software

    Hi!
    I would like upgrade my SAP ERP 6.0 system to EhP4.
    During the phase PRE_EXTENSION/EHP_INCLUSION I get the following error:
    ERROR: Unable to generate package queue.
    Return Code = 3, Reason = "OCS package SAPKE60002 does not match the current software component vector"
    Check log file 'SPDA_EHP_INCLUSION.LOG' for details.
    I looked into the defined stack queue by the EHP Installer tool and detected that this SAP HR component should have the version 38. Currenty the SAP HR has the version 01.
    Can some one help to solve this problem?
    Thank you very much
    regards
    Jürgen

    hii
    Note 822379 might help you
    have a look
    Rohit

  • OCS package  does not match the current software component vector

    Hello TECHIES,
                            Please help me with following error   it is very emergency
    We had developed an ADD-ON in CRM7.0  and when we try to Install in  it into  CRM EHP1 server
    we get the following error:
    OCS package  does not match the current software component vector"

    "emergency" errors should be handled through OSS/CSN, not here on the forum.
    The error message means that the source system has a different support package level than the target system.
    Markus

  • OCS package SAPK-603DHINISUT does not match the current software component

    I'm getting an error in my installation of EHPI4 using the SAPehi tool in the PREP_EXTENSION/EHP_INCLUSION stage that says: OCS package SAPK-603DHINISUT does not match the current software component.
    The SPDA_EHP_INCLUSION.log says " Calculate pure CRT Queue" "for installed Add-ons" "and already applied Support Packages" " "
    3 ETN112 The OCS Package Queue is empty
    2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "
    3 ETN245 The following import prerequisites of OCS Package "SAPK-603DHINISUT" have not been met:
    3 ETN264   In the (alternatively) Requirement set "01":
    3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
    3 ETN264   In the (alternatively) Requirement set "02":
    3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
    3WETN492 Required Add-On component "IS-UT" rel."602" is not installed
    3 ETN264   In the (alternatively) Requirement set "03":
    3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
    3WETN493 Not allowed software component "ECC-VPACK" rel."*" is installed
    2WETN543 OCS package "SAPK-603DHINISUT" does not match the current software component vector"
    I have added the package IS-UT 602 along with all the support packs that go with the IS-UT 602 component but I am still recieving this error. Would anyone have an idea on how to correct this? Any help would be greatly appreciated. Thank you!

    I ended up solving the issue with note #1150349. I had to go into transaction SEPS -> INBOX there where several versions of the ACP
    IS-UT=====603:
    Origin Number Ext. Subject Delivery date/time
    CSR0120031469 0032968 PAT IS-UT=====603 07.10.2009 15:30:27
    CSR0120031469 0032633 PAT IS-UT=====603 14.10.2009 21:19:46
    delete them all out in SEPS and in the EPS\IN folder. Load teh ACP files from the note which corrected the issue. Thank you again for your help!

  • OCS package SAPK-60501INEAPS does not match the current software component

    Hi Friends.
    I installed NetWeaver  7.02 with ECC 605. When I try to update EA-PS component (SAPKGPPD16) with SPAM (7.02/0043) to SAPK-60501INEAPS, I got the following errors:
                          - OCS package SAPK-60501INEAPS does not match the current software component vector
                          - EA-PS,605 Non-permitted release of add-on EA-PS installed

    I downloaded K-605DHINEAPS.SAR from marketplace.
    In the note 1456663 there is a workaround for SEM_BW and FINBASIS components.
    "Load ACP (attribute change package).
    Before starting the installation of SEM_BW or FINBASIS load the attached file "ACP_EHP5_on_NW702.SAR" into your system (Transaction SPAM -> Support Package -> Load Packages -> from Frontend). Otherwise the installation will require a stack XML file which cannot be provided for this scenario."
    My question is, I just can generate the stack XML file with Solution Manager?
    Best regards.
    Cesar Teixeira

  • Ocs package does not match the current software components

    Hi Experts,
    In our SAP ERP 6.0 system few components like SAP APPL,EA APPL ,FinBasis were already upgraded to 603 SP04 long time back.
    Now to install language,we need to upgrade all the components to EHP3.The pre requisite to upgrade to EHP3 as per note number 1095233 is SP08.Few of our components are at SP06 level and i downloaded the supported packages of all the components to upgrade to SP08 and then upgrade to EHP3.
    When i try to display/define the component ECC-DIMp,i get the eror message message" ocs package does not match the current software componentu201D when trying to apply ECC-DIMPu201D .When i looked at the queue,the SPAM is looking for prerequisites of components EA APPL 600 and SAP APPL 600(This components are already upgraded to 603 level).
    Please suggest me the option.
    Thanks
    satish

    Hi,
    For your problem, please check SAP note 1083533, please check extract from this note:
    If you cannot integrate the required component Support Packages because the import conditions are not met (for example, because you have already installed SAP_APPL 603 although SAP_APPL 600 is the prerequisite), you must update the import conditions. When you try to install EHP3 packages using the EHP installer (EHPI), the following error occurs in SPDA_EHP_INCLUSION.LOG: "OCS package SAPKxxx does not match the current software component vector" Ths system displays the same error message when you try to install packages using transaction SAINT. Proceed as described in Note 1118803.
    Solution is documented in the SAP note 1118803.
    Thanks
    Sunny

  • OCS package SAPKIPYJ61 does not match

    Hi Expert
    When I am applying pi_basis patches that time gives error
    OCS package SAPKIPYJ61 does not match the current software component vector
    SAPKIPYJ61
    PI_BASIS,2005_1_640 Non-permitted release of add-on PI_BASIS installed
    regds
    Rahul

    Hello,
    There're 2 kinds of packages: SAINT Packages and Support packages. For SAINT pacakges, they're the installation of a component, whicle support package are the patches for the component.
    Which packge were you installing when you go the error:
    'PI_BASIS,2005_1_640 Non-permitted release of add-on PI_BASIS installed'?
    Can you please provide the name? I assume it's a SAINT pacakges. The package SAPKIPYJ61  is a support package.
    Regards,
    Joe

  • ECC-SE OCS package SAPK-604GGINECCSE does not match the current.

    HI all,
    We are in process of upgrading ECC 5.0 to ECC 6.0 EHP4 SR1 SP3.
    In our source system there is no Base component of ECC-SE .
    As part of upgrade to ECC 6.0 EHP4 we have included this component  when selecting stack in Solution manager.
    But during Configuration phase in ENHANCEMENT PACK INCLUSION we are get the below error message.
    Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
    Last error code set: Unable to generate addon queue. Return Code = 1,
    Reason = "OCS package SAPK-604GGINECCSE does not match the current
    software component vect", check log file 'SPDA_EHP_INCLUSION.LOG' for details
    3 ETN262    Calculating queue part for add-on "ECC-SE" rel. "604"
    3 ETN490 Use the Add-On installation package "SAPK-604GGINECCSE" (type &4"AOX") for Add-On &2"ECC-SE"
    rel.&3"604"
    3 ETN245 The following import prerequisites of OCS Package "SAPK-604GGINECCSE" have not been met:
    3 ETN264   In the (alternatively) Requirement set "01":
    3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
    3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
    3WETN491 Required software component "SAP_APPL" rel."600" is not installed
    3WETN491 Required software component "SAP_HR" rel."600" is not installed
    3 ETN264   In the (alternatively) Requirement set "02":
    3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
    3 ETN264   In the (alternatively) Requirement set "03":
    3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
    3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
    3WETN491 Required software component "SAP_HR" rel."600" is not installed
    3 ETN264   In the (alternatively) Requirement set "04":
    3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
    3WETN491 Required software component "SAP_APPL" rel."600" is not installed
    2WETN543 OCS package "SAPK-604GGINECCSE" does not match the current software component vector
    1 ETN214X."**************************************************"
    1 ETN251   End of phase: "'Add-on Queue Calculation'"
    1 ETN254       End date: "19.07.2009"
    1 ETN255       End time: "05:32:23"
    Please advice me on the following

    hi sunny,
    SPAM is 35 ... well i have got stucked for ECC-SE 604 add-on isnot getting recognized in ssystem during upgrade as it didi not found any base component.
    3 ETN262 Calculating queue part for add-on "ECC-SE" rel. "604"
    3 ETN490 Use the Add-On installation package "SAPK-604GGINECCSE" (type &4"AOX") for Add-On &2"ECC-SE"
    rel.&3"604"
    3 ETN245 The following import prerequisites of OCS Package "SAPK-604GGINECCSE" have not been met:
    3 ETN264 In the (alternatively) Requirement set "01":
    3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
    3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
    3WETN491 Required software component "SAP_APPL" rel."600" is not installed
    3WETN491 Required software component "SAP_HR" rel."600" is not installed
    3 ETN264 In the (alternatively) Requirement set "02":
    3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
    3 ETN264 In the (alternatively) Requirement set "03":
    3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
    3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
    3WETN491 Required software component "SAP_HR" rel."600" is not installed
    3 ETN264 In the (alternatively) Requirement set "04":
    3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
    3WETN491 Required software component "SAP_APPL" rel."600" is not installed
    2WETN543 OCS package "SAPK-604GGINECCSE" does not match the current software component vector
    1 ETN214X."**************************************************"
    1 ETN251 End of phase: "'Add-on Queue Calculation'"
    1 ETN254 End date: "19.07.2009"
    1 ETN255 End time: "05:32:23"
    from tha above log i have considered set 2 & follwoed with sap note 
    1150350 Upgrade to SAP ECC 600 with Add-On ECC-SE 604
    therefore it went smoothly with out issues in EHP_INCLUSION ....
    -rahul

  • SPAM/SAINT - OCS package does not match current software component vector

    Hello Experts,
    This could happen on any type of system I suspect, but it is on my Solution Manager (7.01 on Eh1). I downloaded a support stack (27)and was checking the components requirements.  I use the  Directory box in SPAM, and I go into New Support Packages. I highlight the support package for ST 400 then click on the Queue button.   It comes back with this message: OCS package SAPKITL437 does not match the current software component vector.
    I click continue and the requirements window comes up. It shows that I have currently loaded the wrong BI_Content.  It says:  Non-permitted release of add-on BI_CONT installed.  The release information is BI_CONT,706.
    If I go back to the main window to look at the current package level, I see that BI_CONT  component release (loaded) is 704 - sp 8. 
    I must have gotten very creative when loading that back in 2008.  MOPZ was used, but it was before the support stack restrictions were in place on my system.
    I can't get around this issue, because even trying to load the Basis support package I get this message. 
    If anyone has had the problem and knows what to do I would appreciate some help.  Notes searching has not found anything.     So far my Customer message  has not been helpfull, but it is not SAP support .
    Pat

    Hi Patricia,
    Please, check prerequisites for SAPKITL437 in SPAM.
    It seems like you need to install/update some components in SAINT before.
    From official note: https://service.sap.com/sap/support/notes/1274287
    "Requirements with component ST400 for SP27
    -  Support Package 00 for BI_CONT 706 (SAPK-706BHINBICONT)
    -  Support Package 00 for ST-BCO 400 (SAPK-400AGINSTBCO)"
    Additional info: https://service.sap.com/sap/support/notes/1169247
    Best Regards,
    Aleh
    Edited by: Aleh Mikhniuk on Jul 20, 2011 1:59 PM

  • The declared package does not match the expected package

    I was given some Java code that I need to get working and then make some improvements on, but I'm still in the process of learning Java and the IDE Eclipse as well. There is a package called MyGUI and most of the files in that package had the error "The declared package MyGui does not match the expected package MyGUI" as a result of the inconsistent case, so I changed all of the first lines "package MyGui" to "package MyGUI" and this fixed all of those problems except for one.
    There is still one file where it gives this error message even though I changed the code the same way I did for the other files. I can't figure why this file is different. I saved it and I also refreshed everything, but it still gives me the error message "The declared package MyGui does not match the expected package MyGUI" although the package is clearly declared as "MyGUI".
    Does anyone have an idea of why this would be? I am very new to Eclipse and Java, so I don't really know how to go about solving errors yet.

    Forget the IDE until you get a handle on basic concepts like packages and classpath.
    The error you're talking about comes when a .java or .class file is not in a directory that matches its declared package.
    Let's say that CLASSPATH_ROOT is the only element in your classpath. If you have a class that is declared like so:
    package com.foo;
    class Bar {}Then, you must have CLASSPATH_ROOT/com/foo/Bar.java or CLASSPATH_ROOT/com/foo/Bar.class.
    The language rules for .java files are not as strict as those for .class files, but some compilers may expect them to be the same, and it's a good idea to do so even if it's not strictly necessary, for clarity's sake.
    Also, even though Windows' file system is not case sensitive--that is it considers FOO.class and foo.class the same file name--Java is. You probably can't directly rename FOO.java to Foo.java in Windows, as it will say it's the same name, so if you need to change the case, rename it to a different name, than back to Foo with the correct case.
    Edited by: jverd on Mar 29, 2009 12:07 PM

  • Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

    hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
     the error message it shows is
              ******************************** ERROR ****************************************
    * The version of gcc in the path does not match the version of gcc used to    *
    * compile the currently running kernel.  This can cause unpredictable         *
    * behavior in kernel drivers and should be fixed.                             *
    * gcc version: Linux)                                                          *
    * kernel compiled with: 4.3.2                                                 *
    ******************************** ERROR ****************************************
    my kernel source version is 
       linux-8nes:/home/admin # rpm -qi kernel-source
    Name        : kernel-source                Relocations: /usr/src
    Version     : 2.6.27.29                         Vendor: openSUSE
    Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
    Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
    Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
    Size        : 309251954                        License: GPL v2 only
    Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
    Packager    : http://bugs.opensuse.org
    URL         : http://www.kernel.org/
    Summary     : The Linux Kernel Sources
    Description :
    Linux kernel sources with many fixes and improvements.
    Authors:
        Linus Torvalds <[email protected]>
        see /usr/src/linux/CREDITS for more details.
    Source Timestamp: 2009-08-15 17:53:59 +0200
    GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
    GIT Branch: SLE11_BRANCH
    Distribution: openSUSE 11.1 
    i had also installed GCC 4.3.2.
    it shows the error message as i had posted.
    please kindly help me on this.
    Thanks and regards,
    P.karthick

    Check this solution

  • Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

    Hello World,
    I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
    to install the client i always see the same error in ccmsetup.log:
    File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000.  The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
    I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
    installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

    Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
    MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    Running installation package
      Package:     C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
      Log:         C:\WINDOWS\system32\ccmsetup\client.msi.log
      Properties:  SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: INSTALL.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:21: SmsCheckConfig.  ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
    MSI: Action 10:48:22: SMSValidateClientInstallStamp.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: SmsCheckNewRemoteTools.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: ValidateProductID.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: CcmSetInstallDir.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: BCDSetX64Dir.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: CcmSetPrimaryFolder.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade.  ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
    Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
    Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
    Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
    Guess what
    It worked !
    Thanxs Kent

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

Maybe you are looking for

  • Can i use a pre-intel as a node with an intel mac?

    as the subject-title

  • How to fix Import and folder-synchronize?

    Installed Lightroom 4.2 RC. Now Import and folder synchronize hang up. Uninstalled 42. RC with same result. Removed and then reinstalled 4.1 with same problem. Please advise. [email protected] Message was edited by: SD Rowdies

  • Xorg 7.0-rc4 dummy pkg. I'd rather having a group.

    It isn't better create a xorg-7.0 group, instead of a dummy package? With a group we can choose easily what to install and what not, as pacman asks if it should "install the whole content" of a group or let we choose one by one.

  • Moving Playlists and Preferences

    How can I move my iTunes playlists and/or preferences from my old (Windows XP) computer to my new (MacBookPro2.2) computer? Thanks. Steve MacBookPro2.2   Mac OS X (10.4.9)  

  • Finder keeps relaunching

    My Finder started acting up today. When I try to empty trash, it would just quit and relaunch by itself. Same thing happens when I try to move certain files or open certain folders. The only thing I can think of that can be the cause is that I update