Installing SunStudio12 on CentOS

During installing SunStudio 12 on CentOS 5.1-x86_64-bin, i've got a failed message:java.lang.NullPointerExeption.On the system was installed jdk1.5.09 and netbeans 5.5.1, from SunStodio12 -rpm.If someone can help me with that trouble...please give some advice

Hi;
Could somebody suggest me any documents for installing Oracle 10.2 on CentOS 6.2(Linux x86-64). CentOS is a freely available Linux distribution that is community supported and designed to be similar to Red Hat Enterprise Linux. It is not specifically sold by, or endorsed, by Red Hat Linux.
CentOS is not a certified and supported operating system for Oracle RDBMS software and there are no plans to add support for CentOS. Supported operating systems are listed in the 11gR2 Oracle Installation Guide in chapter 3.
Found few documents in metalink but they are for RHEL 5.
Can I follow the same, or are there any extra OS changes required for release 6.2.Please use OEL 5.x for your installation which is certifed and which you can download from e-delivery oracle site freely.
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Similar Messages

Forms 11gR2 installed on linux (centos 6.3) cannot start

hello ervery one,
I installed weblogic 10.3.5 and jdk first ,and then installed forms11gR2 on my linux virtual machine.
I can not start up my forms builder .
it report an error: cannot find libjvm.so :cannot open shared object file ,no such file or directory.
the weblogic server can start normally.
what may be the reason and how can i fix it ?
lmw.

CentOS is not a supported operating system for 11g Forms/Reports - thus if you run into a brickwall on this, don't be surprised :)
Despite it not being supported, I have ran Forms Builder in an unsupported linux environment before. You likely just need to setup missing environment variables to get it to run, make sure the environment variables listed below are set. I'd probably do this in a little shell script to launch forms builder. However just a fair warning, the user interface isnt pretty when you run it on UNIX-based systems.
#MW_HOME: WebLogic Middleware home directory
export MW_HOME=/opt/oracle/middleware
#ORACLE_INSTANCE: Oracle Instance of your Forms/Reports Domain
export ORACLE_INSTANCE=$MW_HOME/asinst_1
#ORACLE_HOME: Oracle Home of Forms and Reports
export ORACLE_HOME=$MW_HOME/as_1
export FORMS=$ORACLE_HOME/forms
export FORMS_BUILDER_CLASSPATH=$ORACLE_HOME/jlib/frmbld.jar:$ORACLE_HOME/jlib/importer.jar:$ORACLE_HOME/jlib/debugger.jar:$ORACLE_HOME/jlib/utj.jar:$ORACLE_HOME/jlib/ewt3.jar:$ORACLE_HOME/jlib/share.jar:$ORACLE_HOME/jlib/dfc.jar:$ORACLE_HOME/jlib/ohj.jar:$ORACLE_HOME/jlib/help-share.jar:$ORACLE_HOME/jlib/oracle_ice.jar:$ORACLE_HOME/jlib/jewt4.jar:$ORACLE_HOME/forms/java/frmwebutil.jar:$ORACLE_HOME/forms/java/frmall.jar
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/lib/amd64:$ORACLE_HOME/jdk/jre/lib/amd64/server:$ORACLE_HOME/jdk/jre/lib/amd64/native_threads
export LD_PRELOAD=$ORACLE_HOME/jdk/jre/lib/amd64/libjsig.so
#PATH: Make sure to include OS User bin paths
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/jdk/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin
#TNS_ADMIN: Default TNS_ADMIN for 11g Forms and Reports
export TNS_ADMIN=$ORACLE_INSTANCE/config
Thanks,
Gavin

How to install firefox in centos 6.0? What is latest version of firefox support for centos 6.0?

I want to install latest version of firefox browser on my centos 6.0 installed computer. I read some blogs in web based on that i installed firefox version 26. But i need to upgrade firefox version. Is there is any latest version support for centos 6.0 and what is the procedure?

Helo kaaruna,
Use the following on your terminal and let me know if it helped.
a) Install Remi and EPEL Repositories
Install EPEL repository for RHEL/CentOS 6.5/6.4/6.3/6.2/6.1/6.0
# wget Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
# rpm -Uvh epel-release-6-8.noarch.rpm
Install Remi repository for RHEL/CentOS 6.5/6.4/6.3/6.2/6.1/6.0
# wget http://rpms.famillecollet.com/enterprise/remi-release-6.rpm
# rpm -Uvh remi-release-6.rpm
b) Check Availability of Firefox 30
Check the availability of Firefox 30 using Remi repository via YUM.
Check Availability of Firefox 30 in RHEL/CentOS 6.5/6.4/6.3/6.2/6.1/6.0
# yum --enablerepo=remi list firefox
c) Installing or Updating Firefox 30
Install or Update Firefox 30 in RHEL/CentOS 6.5/6.4/6.3/6.2/6.1/6.0
# yum --enablerepo=remi install firefox
d) Starting Firefox 30
To start Firefox just execute following command on the terminal.
# firefox
Please inform me if you face any problem and I will try to help you.

I can't install firefox on CentOS

I have an AWS CentOS instance Linux server.
I FTP's over firefox-26.0.tar.bz2 and ran tar xjf firefox-26.0.tar.bz2 to unzip it.
I can't start up firefox. I cd into the firefox folder and then run firefox (LS shows there is such a file) but get this message: -bash: command not found
Can someone help me figure out how I can get firefox to run?
Thanks...

Make sure to start Firefox via ./firefox otherwise Linux will search for the file via the path environment variable and not in the currently selected directory.

Installing JMF on CENTOS

problem
I downloaded the jmf-linux.bin file and tried running it. I got the same error about the -n param to tail but now mine refuses to execute the install.sfx.$$ file:
output
Do you agree to the above license terms? [yes or no]
y
Permit recording from an applet? (see readme.html) [yes or no]
n
Permit writing local files from an applet? (recommend no, see readme.html) [yes or no]
n
Unpacking...
Extracting...
*/home/ai2main/jmf-2_1_1e-linux-i586.bin: line 297: ./install.sfx.9574: cannot execute binary file<---------------------------------------------------------refuses to execute*
chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory
chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory
chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory
/home/ai2main/jmf-2_1_1e-linux-i586.bin: line 305: JMF-2.1.1e/bin/jmfinit: No such file or directory
/bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory
Done.
summary
This may be a simple setting about permissions (I have tried running the script as root) or about bash - I'm still a Linux newbie.
I assume the remaining errors follow from the first
I'd appreciate any advice, Thanks

problem
I downloaded the jmf-linux.bin file and tried running it. I got the same error about the -n param to tail but now mine refuses to execute the install.sfx.$$ file:
output
Do you agree to the above license terms? [yes or no]
y
Permit recording from an applet? (see readme.html) [yes or no]
n
Permit writing local files from an applet? (recommend no, see readme.html) [yes or no]
n
Unpacking...
Extracting...
*/home/ai2main/jmf-2_1_1e-linux-i586.bin: line 297: ./install.sfx.9574: cannot execute binary file<---------------------------------------------------------refuses to execute*
chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory
chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory
chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory
/home/ai2main/jmf-2_1_1e-linux-i586.bin: line 305: JMF-2.1.1e/bin/jmfinit: No such file or directory
/bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory
Done.
summary
This may be a simple setting about permissions (I have tried running the script as root) or about bash - I'm still a Linux newbie.
I assume the remaining errors follow from the first
I'd appreciate any advice, Thanks

.oui error in the install of oracle database client in a linux CentOS

I am installing oracle database client in eqipo linux CentOS, after making all the passages for the creation of the user oracle and its groups beginning the ./runInstaller application and appears to me the following error:
./runInstaller: line 66: /install/.oiu: cannot excecute binary file
as I can solve this
they can notify me the possible solution to the following e-mail?
[email protected] or
[email protected]

You may want to check these references for CentOS install:
Installing 10g Release 2 on Centos 4.3 & 4.4
http://www.dizwell.com/prod/node/50
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b15660/toc.htm
Oracle® Database Installation Guide
10g Release 2 (10.2) for Linux x86
Part Number B15660-02
Installing Oracle 10.2.0.1 on CentOS 5.0 (x86_64)
http://bderzhavets.blogspot.com/2007/04/installing-oracle-10.html
Installing 9i (9.2.0.1) Database on Centos 4.5
Installing 9i (9.2.0.1) Database on Centos 4.5
installing 10.2.0 on CentOS
Re: Got "java.lang.NullPointerException" installing 10.2.0 on CentOS
Link error installing 10gR2 on CentOS 4.4
Link error installing 10gR2 on CentOS 4.4
Re: 10g in vmware Centos
10g in vmware Centos
~ Madrid.

Linux guy wants to install solaris 10 via nfs using centos as nfs server

well in linux when installing this way I simply copy the dvd install image to an nfs share (or do mount -o loop "isoimage" /nfsmountdir), copy the boot.iso so a cdrom and do a "linux askmethod" during install and then specify the nfs server and dir.
I want to learn sun and want to start by really understanding the install and how to set up slices etc. I would really like to do this using nfs using my centos box as the server as this method at least when installing linux is much mush faster.
so can I do this and if so what are the commands. I did see some documentation but it was for installing from a sun nfs server. but I need to install from the centos as the server. I already have the iso's for the 5 cdroms as well as the dvd image. if possible I would obviously like to use the dvd image.
thanks and remember I am a sun newbie (just bought my first solaris book this week so the more dummied down answer would be the best one for me). if it can be done could you give me the exact process.
thanks a million (and one).

The Sun network installer scripts only work on Solaris. So there's no instructions from Sun for configuring the daemons on Linux necessary to do the configuration.
There are some guides on the net, but I don't know of one that tells the whole story.
You might consider installing Solaris in a VM on the linux box, then configuring jumpstart on that. You could then see how the daemons on it are configured and replicate that configuration on the Linux machine.
Darren

Installing SAP Netweaver 2004s On CentOS 5

I am planning to install SAP Netweaver 2004s on CentOS 5 on a 64bit multiprocessor Dell Server. Is it possible to install on as its a upstream vendor OS clone RHEL5. Are there any detailed HowTo(s) Guides to install.
Thanks in advance for all the help.

When you say its for training, will SAP provide any support on the application server or database side?
No - as said - it´s not officially supported.
I am also planning to use CentOS for training purpose.... but wondering if SAP will help if we have any issues later.
If the problems are OS related they won´t help (and they can´t).
Also, can you provide me with the install steps for Centos?
I would try with the normal installation guides for Linux - if you face any issues let us know.
Markus

Hello Can I install ebusiness suite release 12 on centos

Hello Can I install ebusiness suite release 12 on centos 5 and in that i install vmware ?
The download is from edelivery.oracle.com.. Is installing vmware compulsory..and if i install
vmware is it compulsory that i have to use Only Oracle vm
Edited by: pauljohny on Jan 23, 2010 3:23 PM

Hi,
Hello Can I install ebusiness suite release 12 on centos 5 and in that i install vmware ? CentOS is not certified as an application/database tier nodes, so you will have to go with one of the certified OS as per (Note: 761564.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).
The download is from edelivery.oracle.com.. Is installing vmware compulsory..and if i install
vmware is it compulsory that i have to use Only Oracle vmIf you use Oracle VM you do not have to use VMWare and (you need to use one of the two softwares to have Oracle Apps installed on the guest OS) -- See the following links/docs for details.
Note: 465915.1 - Using Oracle VM with Oracle E-Business Suite Release 11i or Release 12
Using Oracle VM with Oracle E-Business Suite Virtualization Kit
http://blogs.oracle.com/stevenChan/2009/12/oracle_vm_ebs_virtualization_kit.html
Regards,
Hussein

Installing Grid Control on uncertified CentOS system

I'm trying to install Grid Control 10g on a CentOS machine. I realize that centos is not supported, but isn't there a way to get around the dependency checks?
I already tried the hack of adding "redhat-5" to the [Certified Versions] section of the oraparam.ini file (as outlined here: Re: Oracle 10g won't isntall on Enterprise Lunix OS ) and that gets me past the initial check, but eventually the install fails with the following:
./runInstaller -silent -responseFile=/u01/app/oracle/software/grid/em_with_new_db.rsp -waitforcompletion -paramFile /u01/app/oracle/software/grid/oraparam.ini
Performing check for CertifiedVersions
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-8,SuSE-9
Actual Result: redhat-CentOS release 5 (Final)
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: Oracle EnterPrise Manager 10gR2 is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.Isn't there a way to trick the install into proceeding?

Did you ever get Oracle Grid Control installed on your CentOS machine? I am trying to install using the -ignoreSysPrereqs flag, but run into issues during the OMS and AGENT configurations.

Can not see the design view nor the java file in CentOS

Hi all. I've recently installed JSC2 in CentOS. I find this tool really useful. But I have a problem with the design view and the java file view. At the beginning, when I first create a Page1.jsp, I can see the design view and the java view with no problem. I run apps correctly. But after a while, I get a "null pointer exception" error and I am able to see only the jsp view, not the others. I don't even have the option to see the Design and Java views. And the page icon in the project window appears to be darker than a well working page. I'm not really sure what sequence of actions I do to get this error, it just suddenly happens. What I've done so far in JSC2 is to link to pages in the Page Navigation view. It works fine for a while, but after a while I get the error I've described.

Yes, if I do that It happens the same. I've tried everything. Now I'm using Window$ 2000 and it works properly. Thanks anyway.

Problem running Unix CPS install

I'm having trouble getting the CPS to install on the Centos 5
box. I put the CPSLin.bin file into a user directory. I then tried
to run the file as both the user and also 'root' and keep getting
error messages about it not opening shared library files. I checked
the system for every file it complains about and all do exist on
the system. If permissions problem then running as 'root' should
have gotten around that.
I figure it is some sorta environment issue, but not sure
what to fix.
Here is the messages I get every time I run the installer.
[email protected] [~/CPS]# ./CPSLin.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer
archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot
open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directory
./CPSLin.bin: line 2317:
/tmp/install.dir.22304/Linux/resource/jre/bin/java: Permission
denied
./CPSLin.bin: line 2317:
/tmp/install.dir.22304/Linux/resource/jre/bin/java: Success
[email protected] [~/CPS]#

I am even not able to run forms servlets from two different forms60_path, Is there any configuration do you make other than what you have mentioned in this post.
I already open a TAR in this regard, I am still waiting reply from ORACLE.
Thanks,
Shaik Ather Ahmed

Installing ASM in it's own home (non-RAC environment)

I am installing ASM
When I run root.sh I get the following error:Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started.
The install is on Centos 5 (aka RHEL 5). I have set up a user and a group specifically for this install (user: oracleasm group: asmdba) all of which are the owners of the disks (dev/oracleasm/disks) and the home which i am installing it on. But cannot get past the CSS stack appears not be running.
Any assistance would be greatly appreciated...I have been all over OTN and metalink but no luck.
Regards,
Matt

Check if daemon ocssd.bin is running by executing:
ps -ef|grep ocssd
If it not running then execute
/etc/init.d/init.cssd run
sleep 60
/etc/init.d/init.cssd start
sleep 120
/etc/init.d/dbora start
If that works you had problem because of Oracle bug and the solution in metalink note id 264235.1
You need to fix the /etc/inittab file moving the line that had init.cssd run to line before level 3 scripts executed.

Linux LVM (Logical Volume Manager) for CentOS on Azure?

Hi. I am trying out Azure and installed a OpenLogic CentOS 6 virtual machine. I note that it is not running LVM (Logical Volume Manager) by default. I would like to ask if it is possible to:
1. have CentOS Linux installed with LVM by default when creating a Linux virtual machine on Azure
2. switch to LVM after adding a new disk
On the other hand, is it a good idea to use LVM at all? Will it affect performance, features on Azure?
Thanks.

Hi,
Based on my experience, you can add disk to an Azure VM. You can install the Logical Volume Manager to manage the disks attached to the VM. In addition, there is no Linux VM with LVM installed by default. If you want to have this, please submit your requirement
in Azure feedback:
http://feedback.azure.com/forums/34192--general-feedback
In addition, since you can have only one OS system disk for an Azure VM, this limitation may make multi-disk logical volume manager setups unworkable.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Problem creating DB in Centos 4.4 using dbca

Hello,
I have a trouble creating a Db in CentOS 4.4 using dbca. The oracle software is already installed in the CentOS 4.4 but when I try to create a DB using dbca I get the following error (warnings).
Warning:
Name: DirText
Class: XmTextField
Character '\145' not supported in font. Discarded.
Warning:
Name: DirText
Class: XmTextField
Character '\57' not supported in font. Discarded.
/oracle/92/bin/dbca: line 124: 4475 Segmentation fault $JRE_DIR/bin/jre -D ORACLE_HOME=$OH -DJDBC_PROTOCOL=thin -mx64m -classpath $CLASSPATH oracle.sysman. assistants.dbca.Dbca $ARGUMENTS
[oracle@localhost ~]$
The warnings are many. I can't really write all them here. Have you tried the installation your self? Could you please help me out to solve this delima?
I would really much appreciate any help provided. I look forward to hearing from you.
Regards
Tom

I got out of such a dilema by upgrading to Oracle 10.
Any reason you need to stick with Oracle9i?

Installing SunStudio12 on CentOS

Similar Messages

Maybe you are looking for