Installing Text Enrichment with Sentiment Analysis (Salience 5.1.1.7349)
Hi everyone,
I’m trying to install Text Enrichment with Sentiment Analysis (Salience 5.1.1.7349) on Oracle Linux 6 and am referring to the IntegratorETLTextEnrichmentQuickStartGuide.pdf and http://dev.lexalytics.com/wiki/pmwiki.php?n=Main.Installation#Linux
From the instructions in the link, I don’t understand where is the installer to be run and secondly, I don’t see the license.v5 file in my download.
In another post I saw, it was saidd that the license file isn't required for Endeca 3.1 onward. Is that true?
I'd be very grateful if someone can help me understand what is the right procedure to install this..
Many thanks!
Rahul
Hi Rahul
You must download the "Oracle Endeca Text Enrichment with Sentiment Analysis 5.1.1 Installer for Microsoft Windows x64 (64-bit)" package from Oracle Delivery Site.
There you will find everything you need to perform the installation (both the license and the installation file) and different language dictionaries.
If you have any problems with it feel free to tell me.
@a greeting
Similar Messages
-
Text Message with sent/receive time
I had a LG Voyager before the DX. When I got a text message it would show the time when the sender sent the message and the time I received it. So if I turned my phone on at 10 am and somebody sent a text at 8 am it would show sent at 8 received at 10. I noticed the DX doesn't do this. I looked in the marketplace for a app that could probaly do this but could not find one. Does anybody know of one or do I need to do something in the settings.
It looks like "SMS Time Fix" is to address the old issues of Timezone offsets not working properly.
I did find an app called "SMS Timestamper Fix" on the market that is suppose to help address this issue.
Google really needs to store both times in the message database and make them available to the applications.
I also ran across this patch which is suppose to patch the Android OS to store the sent time as opposed to the received time.
You can also follow this as Issue 2989 over at Google. -
Error in Sentiment analysis using Salience engine
I am using QuickStart install of Endeca and then installed Oracle Endeca Text Enrichment Installer 5.0 (Lexalytics Salience).
When I run the graph using the text enrichment, it gives a ERROR message saying "Salience License doesn't support sentiment processing, sentiment processing is disabled globally for now on".
Due to this it is not returning any documentsentiment values
any suggestions?
Thanks in AdvanceAs mentioned in the error message, the license that you are using for the Salience Engine does not have the Sentiment Analysis feature enabled. As a result, no sentiment analysis will be done by the Salience Engine. And hence, you will not get the document sentiment.
Please make sure that you have an appropriate license for the Salience Engine. -
Salience Engine and Sentiment Analysis
Hi ,
Can anyone tell me how can i add my own sentiments keywords and tell which word should be goes into positive or which goes into negative ??
Can i create my own language in the lexalytics tool and access them into the keywords as the data into the library and tell Endeca Server and the Salience Engine that you must have to put this statement into the positive sentiment and the other into the Negative Sentiment ???
Please Reply ....Bhumin,
Judging from your other thread, you are probably still looking to do Sentiment Analysis in Arabic, is that correct? For the supported languages, Lexalytics supports customization to allow for different dictionaries related to entity extraction and a bunch of other features. For more, you can see this blog post and the Lexalytics config documentation.
However, Arabic is not a supported language for Sentiment and due to the way Arabic is constructed as a language, I don't think it's something you could handle with Lexalytics as it's currently constructed. Your best bet is to integrate your data ingest processes with a 3rd party tool or something offered as a service to get what you need.
For example, RepuState has an API that looks pretty interesting (I have no affiliation with them whatsoever) and supports Arabic sentiment analysis. Seems like it could be very easily hooked into Integrator.
Hope that helps,
Patrick Rafferty
Branchbird
Oracle Endeca Information Discovery Specialized Partner -
I have one contact that I've been texting for months, about 5 hours ago, I started receiving an error that the text was not sent. However, if I text a picture and then text with the picture the message goes through. Why am I getting this error?
You can also try out few things >
1) check if the ipod constantly appears in mycomputer section .
- if it does try changing the drive letter of the ipod and try to format the ipod drive(Right click format)
2) if its not comin up in mycomputer then.. there has to be problem with the USB drivers in your computer
you can try
http://docs.info.apple.com/article.html?artnum=304508
The best way to check whether the ipod is faulty or the computer is creating the problem is,
connect the ipod to a different computer which has itunes on it(If possible) -
when i send a text message with my new iphone 5 to my wife who is now using my old Iphone 4 we both receive the message. How is this possible? Also she receives all text messages sent to me. She obviously has a different phone number and a different provider
See here to create a new apple ID
http://support.apple.com/kb/HE37
good luck -
HP photosmart premium C410 windows 7 using og droid phone with new home & biz app. Now I cannot print photos that come to my phone from a text. With the IPrint app I had no problem. It seems an upgrade was worse for me I want the old one back.
Hi Ralph43,
You may have to save the photo within the text message (attachment) to your photo gallery first, then use the HP ePrint Home & Biz app to view and print.
I believe if you open the photo, then press the menu button (sometimes shown as 2 to 4 lines on top of each other near your Home key), next select attachment, last select the one you want, finally save to photo gallery.
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee. -
Hi! I've just purchased an iPhone 5S but whenever I text people with iPhones it sends from my iCloud account. This means that my email comes up for other people not my name/number which is really frustrating! Does anyone know how to stop this?
Go into Settings>Messages>Send and Receive> Is your phone number checked there? If you do not want your email used, then tap on them and remove the checkmark. If there is no checkmark by your phone number, then turn iMessage off, perform a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Turn iMessage on. When it activates, check your settings again under Send and Receive and make sure the number is checked and the emails are not.
-
Turkish support for sentiment analysis
Hello,
in many web pages it says
"Oracle Endeca Server supports following languages:
Catalan, Chinese (simplified/traditional), Czech, Dutch, English, French, German, Greek, Hebrew, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Thai, Turkish"
Does this mean Turkish is also supported for sentiment analysis? I could not find Turkish in Endeca documentation.
Thanks..I'm assuming that you are using the Text Enrichment component in the Integrator ETL product. In that component, the Sentiment Analysis feature uses the Salience Engine from Lexalytics. The languages supported by the Salience Engine are listed here:
Multi-Lingual Support | Lexalytics
Turkish is not one of the supported languages. -
Having two or more Text-Enrichment component in an Inetgrator graph
Hi All,
The data I am trying to load into Endeca Server v3.0 has got three text columns and I would like to do the text-enrichment process on all of them. At the moment I have used one text-enrichment component per each column (overall three text-enrichment components) but as a result some output columns such as Document-Sentiment or Summary are only containing the last column's sentiment/summary where my ideal is to have a summary of all three columns or an average on their sentiment. I wonder if there is any configuration available for these kind of requirements or if it is possible to use different properties files in order to plan three different set of output columns?
Appreciate your help, Regards.Hi Farnaz,
If you enriched in parallel, with each branch enriching a different field on the record, you'd wind up with 3 'EntitiesPerson' fields, one on each branch (assuming you're using the same te.properties file). When you combine the record back together, you will have to do something in your join logic with CTL to combine them.
Something like:
$out.0.EntitesPerson = $in.0.EntitiesPerson + ${"MULTIASSIGN_DELIMITER"} + $in.1.EntitiesPerson + ${"MULTIASSIGN_DELIMITER"} + $in.2.EntitiesPerson; -
Text Enrichment pre-execute initialization failed
I'm using OEID 2.4, when I load the data without text enrichment everything works just fine.
These are the components that my graph uses:Universal Reader ----> Bulk Load to Endeca Data Server.
With the Text Enrichment I have: Universal Reader ----> Text Enrichment ----> Bulk Load to Endeca Data Server
This is the error that my Console throws:
INFO [WatchDog] - Successfully started all nodes in phase!
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node TEXT_ENRICHMENT0 finished with status: ERROR caused by: Component pre-execute initialization failed.
ERROR [WatchDog] - Node TEXT_ENRICHMENT0 error details:
Element [TEXT_ENRICHMENT0:Text Enrichment]-Component pre-execute initialization failed.
at org.jetel.graph.Node.run(Node.java:458)
at java.lang.Thread.run(Thread.java:722)
Caused by: InputFieldName: Plot not in meta data
at com.endeca.clover.adapters.salience.SalienceComponent.validateMetaData(SalienceComponent.java:659)
at com.endeca.clover.adapters.salience.SalienceComponent.preExecute(SalienceComponent.java:490)
at org.jetel.graph.Node.run(Node.java:456)
... 1 more
INFO [WatchDog] - [Clover] Post-execute phase finalization: 1
INFO [WatchDog] - [Clover] phase: 1 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [1] finished with error - elapsed time(sec): 0
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 FINISHED_OK 0 18002
INFO [WatchDog] - 1 ERROR 0 19033
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
INFO [WatchDog] - WatchDog thread finished - total execution time: 5 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !
I don't know what to do... help, anyone?INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.3.0 build#021 compiled 15/10/2012 15:10:55
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.7.0_07, max available memory for JVM 895680 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Recordsearch.grf
INFO [main] - Loading properties from file C:\Users\test\OracleDemo\UND\.\seliance.properties
INFO [main] - Hint: Add additional worker threads: available: 4 in configuration: 2
INFO [main] - Graph revision: 1.5 Modified by: test Modified: Wed Jun 19 13:04:27 IST 2013
INFO [main] - Checking graph configuration...
INFO [main] - Salience license: C:\Program Files (x86)\Lexalytics\license.v5
INFO [main] - Salience data dir: C:\Program Files (x86)\Lexalytics\data
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Recordsearch)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - Salience license: C:\Program Files (x86)\Lexalytics\license.v5
INFO [main] - Salience data dir: C:\Program Files (x86)\Lexalytics\data
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [RECORD_STORE_READER0_0] - RecordStoreReader: connecting to http://localhost:8500/rs_output/
INFO [WatchDog] - Successfully started all nodes in phase!
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node TEXT_ENRICHMENT0 finished with status: ERROR caused by: Component pre-execute initialization failed.
ERROR [WatchDog] - Node TEXT_ENRICHMENT0 error details:
Element [TEXT_ENRICHMENT0:Text Enrichment]-Component pre-execute initialization failed.
at org.jetel.graph.Node.run(Node.java:458)
at java.lang.Thread.run(Thread.java:722)
Caused by: EntitySentiment-Field: EntitiesPlace not in meta data
at com.endeca.clover.adapters.salience.SalienceComponent.validateMetaData(SalienceComponent.java:705)
at com.endeca.clover.adapters.salience.SalienceComponent.preExecute(SalienceComponent.java:490)
at org.jetel.graph.Node.run(Node.java:456)
... 1 more
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 0
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 0 38312
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
INFO [exNode_0_1370587626037_RECORD_STORE_READER0] - RecordStoreReader: Transaction ID = 71
INFO [exNode_0_1370587626037_RECORD_STORE_READER0] - RecordStoreReader: Last Committed Generation ID = 16
INFO [exNode_0_1370587626037_RECORD_STORE_READER0] - Full Extract or Baseline read detected
INFO [WatchDog] - WatchDog thread finished - total execution time: 5 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !
i have the same error can you please help ???? -
MMS not working in iPhone4S when installing config profile with APN
When we use the iPhone Configuration Utility (either the latest version or previous versions) to create a config profile with APN info, then install the profile to an iPhone4S, we noticed that MMS (multimedia messaging) was no longer working. This means we could not send or receive MMS messages. And this is MMS going over the MMS protocol (and not iMessage). We had not seen this before. We routinely do config profiles with APN info and have done for all iPhone models and iOS version before the new iPhone4S. Never had a problem with MMS or anything else. This is for iPhone4S devices in the AT&T network. It is easy to reproduce and you don't need an enterprise APN for that. In fact just a config profile with AT&T's APN settings will still break MMS when installed (other than the MMS, everything else works fine).
It does not appear an iOS 5 issue. iPhone4 (or iPhone3GS) with iOS 5 do not have this problem. It appears to be tied to the new iPhone4S hardware. The same configuration profile (with the APN info) works fine on iPhone4 with iOS 5 (MMS works fine), but when you put the very same configuration profile to an iPhone4S, MMS quits working.
Doing a network reset does not solve the problem. Only removing the profile fixes the MMS
Any ideas, explanations or workarounds?I called the Apple care line, and eventually got to 4th tier support, where they declared that there must be an issue with the APN I'm using, regardless of the fact that none of the iPhone 3G, 3GS', and 4's in our office are experiencing this issue while using the same APN. I guess I shouldn't be surprised about this, afterall who'd expect Apple to actually admit there's a "bug" in one of their products, especially since this is hapenning to a very small number of users on the 4S. Getting to 4th tier support was free, but to be able to talk to someone who can actually investigate this issue will cost $700.
I offered to give them access to our private APN for testing, but they were "unable to do that sort of testing". Additionally, we have tested using a public APN from AT&T (wap.cingular), and still experience the same issue.
Lastly, I did some further digging, and I think it has something to do with PDP Context 2 not getting an IP address. As a disclaimer, I have no clue what a PDP Context is, what it does, what it's for, but obviously MMS needs it. Going into field test mode on the phone will allow you to see the PDP Contexts, and is where I got this info from.
On the iPhone 4S, without an APN profile installed, the PDP Contexts are listed 0-3. These 4 contexts have values for an APN, and an IPv4 address, although context 0 and 2 are the only ones that have values in them.
When an APN profile isnt installed, MMS' can be sent, cellular internet doesn't work., the values are:
Context 0
IPv4: ip is blank
APN: phone (this is the default APN for the iphone 4s on att).
Context 2
IPv4: has a valid public IP address
APN: wap.cingular
When an APN profile is installed, MMS's can't be sent, but cellular internet does work, the values are:
Context 0:
IPv4: Valid public IP address is present
APN: Our enterprise APN
Context 2:
IPv4: ip is blank.
APN: wap.cingular
It appears that when Context 2 has an IP address, MMS' are able to be sent. One other interesting fact, on the iPhone 4, only 1 PDP Context is listed, while the 4S has 4 listed.
Hopefully this issue will be resolved in the 5.1 update, as this update contains a baseband update for the 4S, updating it from 1.0.14 to 1.2.01-1. Unfortunately I don't have access to a 5.1 beta, otherwise I'd test this my self. If anyone has access to the beta, and wants to test APN profiles/MMS send status, we'd greatly appreciate it! -
MES Interface Development (Standard IDOC-MATMAS enriched with Z-Fields)
Hello Everyone,
We have an issue that we want to sent IDOC data to our local MES System. The XML Target Structure of the MES System is given and cannot be changed.
Most of the fields to be sent are in the MATMAS IDOC but some fields need to be enriched with material classification data which are maintained for each material individually in the ERP. To retrieve the data out of ERP we using the u201CBAPI_OBJCL_GETDETAILu201D. Here we perform an iteration about all these fields to read the classification description and the associated characteristic value. Sometimes it can happen that not for each material the value are maintained and then we are getting blank values
Now I coming back to my main questions.
The target structure of the MES XML File is given and need basically just two core segments from MATMAS IDOC.
E1MARAM SEGMENT="1" -> Key fields needed: Material Number, MEINH, EAN Number etc.
E1MAKTM SEGMENT="1" -> Key fields needed:: Material Description
The n- Classifcation field need to be listed directly under the segment E1MARM Segment. So the target structure need to be dynamically built with these n Z Field under den Segment with the following structure.
E1MARAM SEGMENT="1" Material Number, MEINH, EAN Number etc.
1
u2026<ZL161AUSPM SEGMENT="1">
<ATNAM>MGBEZ_</ATNAM>
<ATWRT>Galenical Bulk Prod.</ATWRT>
..</ZL161AUSPM>
n
E1MAKTM SEGMENT="1" Material Description
As stated out above the information from the classification data are filled in an internal table (XML document with several Row)
Questions:
How do I get the information from the internal XML Document into such ZL161AUSPM structure. Shall I rename the rows in the XML Document from Row to <ATMAN>? And how is this possible? I assume that I cannot change the row name in an "MII XML Document"
<?xml version="1.0" encoding="UTF-8"?>
<Rowsets DateCreated="2009-09-04T14:24:58" EndDate="2009-08-31T14:43:13" StartDate="2009-08-31T14:43:13" Version="12.0.6 Build(12)"><Rowset><Columns><Column Description="CHARACT" MaxRange="1" MinRange="0" Name="CHARACT" SQLDataType="1" SourceColumn="CHARACT"/><Column Description="CHARACT_DESCR" MaxRange="1" MinRange="0" Name="CHARACT_DESCR" SQLDataType="1" SourceColumn="CHARACT_DESCR"/><Column Description="VALUE_NEUTRAL" MaxRange="1" MinRange="0" Name="VALUE_NEUTRAL" SQLDataType="1" SourceColumn="VALUE_NEUTRAL"/></Columns><Row><CHARACT>CH0_MES_01</CHARACT><CHARACT_DESCR>CH0_MES_01</CHARACT_DESCR><VALUE_NEUTRAL>AT</VALUE_NEUTRAL></Row><Row><CHARACT>CH0_MES_16</CHARACT><CHARACT_DESCR>CH0_MES_16</CHARACT_DESCR><VALUE_NEUTRAL>AAI-WC</VALUE_NEUTRAL></Row><Row><CHARACT>CH0_MES_01</CHARACT><CHARACT_DESCR>CH0_MES_01</CHARACT_DESCR><VALUE_NEUTRAL>AT</VALUE_NEUTRAL></Row><Row><CHARACT>CH0_MES_05</CHARACT><CHARACT_DESCR>CH0_MES_05</CHARACT_DESCR><VALUE_NEUTRAL>10000.0</VALUE_NEUTRAL></Row></Rowset></Rowsets
How do I get the dynamically the structure under the E1MARAM SEGMENT="1"? with n u2013 integration? This mean if the material has been assigned three characteristic then I need three time the structure under the segment u201CE1MARAMu201D
Is someone experienced with interface development of such Z-Message respectively has someone an idea or guideline to dealt with such issues?
Thanks in advance,
Markus
PGST
PT Business Solution Management- Manufacturing
F. Hoffmann-La Roche Ltd. Switzerland, Basel
Edited by: Markus Schmeckenbecher on Sep 4, 2009 2:33 PMMarkus,
it is a bit difficult to get the structure from your post, but when I get it right you need to add new nodes in a predefined xml structure.
Did you have a look at the Link editor action "Data Item" from the SAP xMII XML Output? You can define a name and value and add it to a given xml structure. A problem might be the target xml if it is not an IlluminatorDocument (which is of kind /Rowsets / Rowset / Row).
If this does not work, you may try to build Local xml structures for all your Z fields, and append those xmls to your target, using the Link Editor Append XML function.
Michael -
Cannot install the Microsoft Exchange connectivity analysis tool
I am troubleshooting our new 2013 Exchange server because Outlook client cannot connect but OWA is working fine. The 2 new 2013 Exchange server as DAG were installed to co-exist with Exchange 2007.
I am trying to download and install Microsoft Exchange connectivity analysis tool BUT always got an error "Error attempting to install the Microsoft Exchange connectivity analysis tool" and in the log the error is "URLDownloadToCacheFile
failed with HRESULT '-2146697208'.
I am installing it in Windows 8 64b, Please help as we are troubleshooting the new Exchange without any success so far...If there is an full download link, please provide.
Thanks in advance...Hi Teyob,
Did you try to use different browser to check if the issue persist?
This issue was occurred on browser. If you IE with this issue, we should check to clear the option "Warn if changing between secure and not secure mode" from your Internet Explorer(IE) Tools--Internet Options--- Advanced--Security.
If the setup URL of the ClickOnce application being installed is redirected from a non-secure to a secure site (or vice-versa), the installation would fail due to the Internet Explorer warning. Therefore, please make sure to remove the redirection completely
and point to the actual setup URL.
If the issue persists, we could perform Windows Update to install updates and then run the Desktop configuration again.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
My son had a friend give him his apple ID username and password, and downloaded a texting app. Now, some text messages were sent, and they are both denying it. Is there any way to know if the text messages came from my son's iPod? The app and texts are deleted, so I can't look at a history to see who typed them.
I could not find anything one the developer's upport page. Contact the developer and ask
http://pinger.zendesk.com/categories/2067-need-help-with-textfree
Maybe you are looking for
-
I have a laptop which I use away from home and would like to download itunes so if i download something on my laptop, i can transfer it to my iPad straight away without having to transfer the music to my main computer. How can i have my library on my
-
Can't login to my account after installing OS X Server
Just some background info: I have had a mac mini for 2 years now and I backup to an external hard drive using Time Machine. My wife just got a new Macbook Air and I wanted to make sure her she was covered with Time Machine, but without having to unpl
-
Component Configuration Problem
Hi! When trying to create a new Component Configuration, I receive the following error: The following error text was processed in the system TS3 : Screen output without connection to user. The error occurred on the application server PSD1P02_TS3_01 a
-
Oracle Express Edition 10g on Ubuntu
Since I installed Oracle Express edition 10g on Ubuntu 9.04 Linux I have had a problem with gdm and x-server not wanting to start. at present working but most times refuses to start. I guess that the problem could be that some of /etc/init.d/gdm file
-
Documentation for SAP function modules??
Hello, is there any documentation for the SAP function modules available? I need documentation for SJ01 (SAP Objects). If I try to view the documentation in SE80, I get the error message: "Document OJ_XXX(whatever I selected) is not available in lang