Installing the IDE Kit

Hi,
I am very new to programming. I was told that Eclipse is the best IDE which is available for free download and good for begineers. I tried to download and install it by myself. As I was going through the installation process, I found it a little confusing because it is asking me to install Java run time engine first and do some setting after installations. Can some one help me on this. Can you share some kind of installation manual/procedure if you have so that it would walk me through it. you help will be greatly appreciated.
thanks,
Sekhar

You need the Java Run Time Enviroment and SDK(Sun Development Kit) in order to compile and run Java, google Java SDK, as the SDK also has a matching JRE in it, install it and you should be good 2 go.

Similar Messages

Error when installing the Integration Kit for SAP

Hello,
When installing the integration Kit I get the following error:
The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
What have I done wrong?
What is the solution? Reinstalling everything but doing what?
Thanks and regards,
Ana.

Hi Ingo,
Yes, it is BO Edge.
I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
What else can I do?
Thanks and regards,
Ana.

Can't install the overvoice kit on my ipod nano 5

Hello,
i have ipod nano 5 for several years. i got a new computer and i wanted to transfer songs for my ipod.
i installed itunes and wanted to install the voice over kit. after downloading the kit the installation faild with an 32 error.
i want to mention that i am a blind user so without the overvoice the i ipod is useless for me.
i tried to reinstall the itunes and it didnt help.
i use windows 7 on a dell laptop.
thanks!

Please tell me that it has NEVER been jailbroke. If it has not been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

ITunes was unable to install the VoiceOver kit. An unknown error occurred (1260).

I now get this error after getting the latest version of iTunes on 2/2/2015.
I have a 4th gen shuffle.
I've tried restarting the computer. I've tried getting the latest Microsoft updates. Nothing works.
Is there a log I can check for more information on this error?

Hey!
I have the same problem but with different specs.
I'm using the latest OS X Yosemite 10.10.
And also the latest iTunes version 12.1.0.50.
When I enable the VoiceOver on my iPod shuffle, the language dropbox is not accessible.
Then, it prompts the terms and conditions and also the details of the VoiceOver kit version, and it says the new update has now support for OS X Lion... But I'm using Yosemite...
Then, I get the annoying error 1701...
Already tried to uninstall the VoiceOver kit framework, but no success... Already restored the iPod, no success. I've been searching all over the web and this used to be a problem but it was solved with a OS X Lion update... Well, we have Yosemite now, it's about time to come up with a fix!
Does anyone have any suggestions to fix this? Maybe someone using Yosemite with the VoiceOver kit working, could copy the framework file and let us download and replace ours, to see if it's any good... Other than that, really dunno what to do...

Help about the error of installing the ides ehp5, error code:1073740791

hi All Basis Expert,
I have downloaded the ECC6.0EHP5, ides version. When I try to install it on windows server 2003 X64, I always got the error at phase 17, and the return code is 1073740791. the message like that:
Execution of the command "C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect" finished with return code -1073740791. Output:
The SAPinst.log file as follows:
SAPinst.log
INFO 2099-08-30 07:33:38.314
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection".
INFO 2099-08-30 07:33:38.314
Working directory changed to C:/Program Files/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2099-08-30 07:33:38.408
Switched to user: cdp-ehp5\ec2adm.
INFO 2099-08-30 07:33:38.533
Creating file C:\Program Files\sapinst_instdir\ERPEhP5\AS-ABAP\ORA\CENTRAL\R3load.exe.log.
INFO 2099-08-30 07:33:38.548
Switched to user: cdp-ehp5\ec2adm.
INFO 2099-08-30 07:33:38.580
Output of C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect is written to the logfile R3load.exe.log.
WARNING 2099-08-30 07:33:41.830
Execution of the command "C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect" finished with return code -1073740791. Output:
ERROR 2099-08-30 07:33:41.845
CJS-30023 Process call 'C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code -1073740791. For details see log file(s) R3load.exe.log.
ERROR 2099-08-30 07:33:41.892
FCO-00011 The step testDatabaseConnection with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR ( Last error reported by the step :Process call 'C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code -1073740791. For details see log file(s) R3load.exe.log.).
INFO 2099-08-30 07:33:42.517
Creating file C:\Program Files\sapinst_instdir\ERPEhP5\AS-ABAP\ORA\CENTRAL\__instana_tmp.xml.
Any ides? Any help? Many thanks.
Ross Wang

Hi Vincent,
I don't know if the following information is enough?
disp+work information
kernel release                720
kernel make variant           720_REL
DBMS client library           OCI_10201_SHARE,
DBSL shared library version   720.00
compiled on                   NT 5.2 3790 S x86 MS VC++ 14.00 for NTAMD64
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  May 7 2010 02:47:09
update level                  0
patch number                  46
source id                     0.046
supported environment
database (SAP, table SVERS)   700
                              710
                              701
                              702
                              703
                              711
                              712
                              720
                              730
                              731
DBMS server
   ORACLE 10.1.0..
   ORACLE 10.2.0..
   ORACLE 11.2...*
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
disp+work patch information
( 0.001) Inconsistencies for <tt:call transformation> II (note 1240930)
( 0.001) SELECT with FOR ALL ENTRIES and dynamic WHERE condition II (note 110391
6)
( 0.001) Presentation buffer improvements (note 1332488)
( 0.001) Currency fields with manipulated input mask (note 1325894)
( 0.001) XBNF: Adjusted some identifier rules (note 1332293)
( 0.001) Suppressing input history for the SAP GUI (note 1264378)
( 0.001) VMC: Checking for null in JARM data condensing (note 1334807)
( 0.001) GUI status version (note 1081770)
( 0.001) VMC/JAC (note 1332616)
( 0.001) VMC/JAC (note 1332616)
Ross

Installing the j2ee kit

I could not intsall the java enteprise development kit which just had 1 download -
j2eesdk-1_4_01-windows.exe of 101.MB.
I get the following message "Extracting Installation files" then "
j2eesdk-1_4_01-windows.exe file appears to be corrupted" and the installation is halted.
I downloaded the software on to a cd - rw. Could it be the cd?

Although the file size seems OK, you seem have a bad download. Windows file properties show 106 521 349 bytes (106 524 672 on disk).
Note that if all you need is the application server 8 update 1 (assuming you already have a JDK 1.4.2 and don't need all the samples), you can download it separately in a 34MB archive.
I don't believe the problem is related to the CD as the installer creates temporary files in the default user or Windows directories.
-Alexis

Unable to install the BusinessObjects XI Portal Integration Kits on shrepoi

Hi all,
I am attempting to install the following kit onto my sharepoint 2007 installation:
BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit
Download BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit - ZIP 5MB
My Sharepoint is fully up to date and is version 12.0.0.6335.
Each time i try to install, I get the message:SP3 Patch is required to install Sharepoint 2007 Integration Kit. I believe that this is already installed as whenever I try to install the SP3 Patch I get:
The expected version of the product is installed on your system.
I have checked and it looks to me that version 12.0.0.6335 is the most up to date and surpasses the SP3.
Can anyone assist?
Kind Regards,
G

Can you confirm the version of XIR2 from CMC application -> settings tab.
XI R2 SP3 version start with 11.5 not with 12, please check you have installed the correct version of BOE.
Thanks,
Shivanand

Installing Mobile Plug-Ins in the IDE problem

Hello,
I try to install the IDE plugin Mobile in SAP NetWeaver Developer Studio by following the help of SAP. My problem is in the installation of the mobile application for laptops I can not find the folder \ Program Files \ SAP \ IDE \ CE \ eclipse \ plugins \ com.sap.tc.ap \ comp, and I can not find the default.confdef file
thank you for your help

Hi,
Please let us know whether you are using NWM 7.1 or 7.3
If you are using 7.3, then you cannot find these files. The procedure is different from that of 7.1, just you need to extract all the plugins into the eclipse plugin folder.
For 7.1, refer the following document
http://help.sap.com/saphelp_nwmobile71/helpdata/en/8f/0b674240449c60e10000000a1550b0/frameset.htm
For 7.3 refer the following document
http://help.sap.com/saphelp_nw73/helpdata/en/47/a834ce06cd2af3e10000000a42189b/frameset.htm
Hope this helps.
Thanks and Regards,
Suma

How to install the DEV on RAID server?

Hello Friend
I am interested to Know that what are the preconfiguration required for installation of ECC 6.0 (Dev system) like
At the time of installation,
1. Install win 2003 with latest patch
2. installation of Database( Oracle or MSSQL)
3. Then Is loop back adpater is requirred?
4. What entery should be maintain in host file in directory Driver?
5. BC set are already activated? or should be import? How?
6. How to check the which BC set are available?
E.g. some of consultant facing problem like at the time of material master enter then only
few view or option are available then how to check?
I have some basis knowldge but not at this level.
I have already install the IDES 6.0 but i know actual SAP and IDES installation
is different things.
Hope anybody guide me
Thanks
Ganesh

I have temporarly solved

Installing SAP IDES in Windows 2003 and MS-SQL

We would like to installa an SAP IDES, in one of our servers, we have downloaded this media:
DVD IDES SAP ERP 2004 Install. Export 11 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 12 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 13 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 15 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 16 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 18 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 19 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 20 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 21 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 1 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 14 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 10 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 2 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 3 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 4 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 5 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 7 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 17 of 21     Version 1
Installation Master 6.20/6.40 Windows Server on x64 64bit     Version 1
DVD IDES SAP ERP 2004 Install. Export 6 of 21     Version 1
RDBMS MSSQLSRV 2005 SP3 1 of 6     Version 1
RDBMS MSSQLSRV 2005 SP3 2 of 6     Version 1
RDBMS MSSQLSRV 2005 SP3 3 of 6     Version 1
RDBMS MSSQLSRV 2005 SP3 4 of 6     Version 1
RDBMS MSSQLSRV 2005 SP3 6 of 6     Version 1
DVD IDES SAP ERP 2004 Install. Export 8 of 21     Version 1
DVD IDES SAP ERP 2004 Install. Export 9 of 21     Version 1
RDBMS MSSQLSRV 2005 SP3 5 of 6     Version 1
SAP NW04 SR1 SAP J2EE Engine (SCS NTINTEL)     Version 1
SAP NW04 SR1 SAP J2EE Engine (OS independent parts)     Version 1
"CD NW04 SR1 6.40 SAP Kernel MSSQLSRV"     Version 1
SAP ERP 2004 SR1 JAVA Components CD     Version 1
During the installation, the sapinst ask for the kernel disc, when i show the folder with the kernel data, it gives me this error
You entered G:\Kernel_640_MSSQL_Server found label MSSQL:AKK:6.40:DVD_KERNEL:SAP Kernel 6.40 MS SQL Server: CD51030771 but need the label MSSQL:AKK:6.40:UKERNEL:*.amd64
The Media of the kernel downloaded is:
51030771 "CD NW04 SR1 6.40 SAP Kernel MSSQLSRV"
Can you help me with this error? where can i find the correct media for our installation?
Our Server is running Intel Xeon 64 Bits Processors with Windows 2003 Enterprise Edition 64 Bits

Hello Markus,
I´m downloading the media you suggested, 51031282 , but since my conection is very slow it will take some time to complete.
This Kernel is UNICODE (51031282)?
Oliver Ruckober from SAP, wrote me
+ "Dear Customer
you installed the IDES ERP2004 with option unicode but this version of
IDES is the last non unicode version.
All IDES versions lower than IDES ECC 6.0 are NON-UNICODE systems !!
best regards Oliver Ruckober
GM-STS" +
Regarding your advice
"Be aware that you must not install Java into this system and that it's not supported to connect any Java applications to non-unicode systems. New installations should always be Unicode."
I will install an ABAP only instance of the IDES (NON-UNICODE) in a separated DB instance
Kind Regards
Edited by: dmerchan on Jul 2, 2009 6:42 PM

ERROR "Error Applying Transforms" while installing SAP integration kit.

i have currently installed
BusinessObjects Enterprise XI3.1 SP3
Live office
xcelsius 2008
Crystal reports 2008
now i want to install the integration KIT for SAP BO. But when i start the setup it gives the error "Error Applying Transforms. Verify that the transform parths are valid."
Need help on this.. please

Hi,
Try installing Windows uninstaller to uninstall the integration kit(the previous one) and installl the integration kit again. This will work.
Thanks
Washburn

Need to install XI integration kit

Hi,
I have downloaded the Business object Integration kit free trail version.
I have installed crytal report now what i need is to connect to BI7.0 through Business object Integration kit.
But i dont know how to proceed further or how to install the BO integration kit.
So kindly advice me on the same.
Regards
Vijay

Hi Vijay,
The intergartionkit for BO with BI 7.0.
should be installed to interact with the R/3 table thru BO.
Procedures and prerequistiies to follow:
1.First install the BI 7.
2. Install the BO XIR2 or XIR3. in the same machine or diff server.better install diff system.
3.while installin the BO install as server.
4.Then install the intergartion kit for SAP - BO need to be installed in the same machine or if BO installing as a diff server need to be install in that server.
5.Before creating the RFC connection with this BO system and SAP R/3 proper authorization for BIW system to be created in SAP system by BASIS administrator or follow the installion kit.
6.Then establish connection with the BO with SAP system now both system will get interact.
7. Then all the infocubes you could create in the BI system.
that infocubes you can access in the BO report creation area..
any doubts keep in touch..
Regards.
Paneer

Error when installing the latest software development kit

Good morning. I have a dell dimension 4100 running the windows me operating system. Wen I download and try to install the latest software development kit, I get the following error message when I click the finish button. "_delis caused an error in _isdel". Any idea why?

The copy that you downloaded sounds like it has been corrupted. Try redownloading the file, and reainstalling it. If this still happens. Let me know.

Attn: Installing the Sample Applications from the ifs Development Kit

There are a number of problems with the sample Applications included in the
Developer's kit. These need to manually fixed in order to get the demos to work.
#1: Solaris Only
The install of the iFS Development Kit, replaces the existing adk.jar with a new
one containing some additional classes. Unfortunately the install process does not
set the correct privileges on the new version of adk.jar. Please ensure that the
file $ORACLE_HOME/ifs/lib/adk.jar is world readable.
Bug # 1304730
This issue will be resolved on the next drop of the Oracle Internet File System
development kit.
#2: Generic
There is a problem with the way in which the login.jsp establishes a connection to
the repository. The current code makes incorrect assumptions about the name of the
iFS Service and the schema password.
The following changes are required.
In order to connect to the repository 4 pieces of information are required.
1. The iFS User Name
2. The iFS User's password
3. The properties file to be used
4. The database password of the user who owns the iFS Schema
The Login.jsp needs to be altered so that it requests these four arguments before
attempting to establish a connection to the repository.
(The current version only requests username and password).
All four arguments need to be provided as arguments to the login method on the
underlying JavaBean that the JSP invokes when it want to open a connection
to the repository.
***************** HERE IS THE REVISED CODE FOR INSURANCE APPLICATIONS ************
********************************** LOGIN.JSP *************************************
<%@ page import = "ifsdevkit.sampleapps.insurance.InsuranceLogin" %>
<%@ page import = "oracle.ifs.adk.security.IfsHttpLogin" %>
<html><head>
<jsp:useBean id="inslogin" scope="session" class="ifsdevkit.sampleapps.insurance.InsuranceLogin" />
<jsp:setProperty name="inslogin" property="*"/>
<%
String REDIRECT_PATH = "/public/examples/insuranceApp/claims";
boolean loggedIn = false;
if (inslogin.getSession() != null && inslogin.getResolver() != null)
// Use existing insurance login
loggedIn = true;
else
// No existing insurance login
IfsHttpLogin login = (IfsHttpLogin) request.getSession(true).getValue("IfsHttpLogin");
if (login != null && login.getSession() != null && login.getResolver() != null)
// Use existing IfsHttpLogin login
inslogin.init(login.getSession(), login.getResolver());
loggedIn = true;
if (!loggedIn)
String username = request.getParameter("username");
String password = request.getParameter("password");
String serviceName = request.getParameter("serviceName");
String schemaPassword = request.getParameter("schemaPassword");
if (username != null && password != null &&
!username.trim().equals("") && !password.trim().equals(""))
// Login using username/password
try
if (serviceName == null | | serviceName.trim().equals(""))
serviceName = "IfsDefault";
inslogin.init(username, password, serviceName, schemaPassword);
request.getSession(true).putValue("IfsHttpLogin", inslogin);
loggedIn = true;
catch (Exception e)
%>
<SCRIPT LANGUAGE="JavaScript1.2">
alert("The username or Password was not valid, please try again.");
</SCRIPT>
<%
if (loggedIn)
// Redirect to the directory where the claim files reside
response.sendRedirect(REDIRECT_PATH);
else
%>
<title>Insurance Demo App Login</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF">
<form METHOD=POST NAME="loginform" ACTION="login.jsp">
<table>
<tr>
<td><b>Username:</b></td>
<td><input type="text" name="username" value=""></td>
</tr>
<tr>
<td><b>Password:</b></td>
<td><input type="password" name="password" value=""></td>
& lt;/tr>
<tr>
<td><b>Service Name:</b></td>
<td><input type="text" name="serviceName" value="IfsDefault"></td>
</tr>
<tr>
<td><b>Schema Password:</b></td>
<td><input type="password" name="schemaPassword" value=""></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>
<input type="submit" value="Log in">
</td>
<td>
<input type="reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
<% } %>
*************************** END INSURANCE LOGIN.JSP ******************************
This code has been changed so that it requests the four agruments that are required
to connect to the repository and passes them to the login method on the underlying
bean. Note that we have provided the complete source code to this file in order to
make it simple to deploy the revised version of the code. Simply cut and paste this
code into a new file called login.jsp. Copy the File into the iFS
repository folder /ifs/jsp-bin/ifsdevkit/sampleapps/insurance.
****************************** INSURANCELOGIN.JAVA *******************************
package ifsdevkit.sampleapps.insurance;
* Copyright (c) 2000 Oracle Corporation. All rights reserved.
import java.util.Locale;
import javax.servlet.http.HttpSessionBindingEvent;
import oracle.ifs.beans.DirectoryUser;
import oracle.ifs.beans.FolderPathResolver;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.common.CleartextCredential;
import oracle.ifs.common.ConnectOptions;
import oracle.ifs.common.IfsException;
import oracle.ifs.adk.security.IfsHttpLogin;
* The login bean for the Insurance demo app.
* <p>
* This class provide the login info. The class implements the
* <code>IfsHttpLogin</code> interface so it can share login data with other
* login beans.
* @author Edward Yu
* @version 1.0
* @see IfsHttpLogin
public class InsuranceLogin implements IfsHttpLogin
* The <code>LibrarySession</code>.
private LibrarySession m_session;
* The <code>FolderPathResolver</code>.
private FolderPathResolver m_resolver;
* Default constructor required by the jsp spec for the USEBEAN tag
* @exception IfsException
public InsuranceLogin()
throws IfsException
* Make a connection to iFS
* @param username The username to be used for login.
* @param password The password to be used for login.
* @param serviceName The service name to be used for login.
* @param schemaPassword The schema password to be used for login.
* @exception IfsException if operation failed.
public void init(String username, String password, String serviceName,
String schemaPassword)
throws IfsException
LibraryService service = new LibraryService();
CleartextCredential me = new CleartextCredential(username, password);
ConnectOptions connection = new ConnectOptions();
connection.setLocale(Locale.getDefault());
connection.setServiceName(serviceName);
connection.setServicePassword(schemaPassword);
m_session = service.connect(me, connection);
m_resolver = new FolderPathResolver(m_session);
m_resolver.setRootFolder();
DirectoryUser user = m_session.getDirectoryUser();
if (user.isAdminEnabled())
m_session.setAdministrationMode(true);
* Initialize the login bean.
* <p>
* The default constructor does not set the necessary fields so it needs
* to be set instantiation.
* @param session The <code>LibrarySession</code> object.
* @param resolver The <code>FolderPathResolver</code> object.
public void init(LibrarySession session, FolderPathResolver resolver)
m_session = session;
m_resolver = resolver;
* Return the login's session object.
* @return The <code>LibrarySession</code> object.
public LibrarySession getSession()
return m_session;
* Return the login's path resolver.
* @return The <code>FolderPathResolver</code> object.
public FolderPathResolver getResolver()
return m_resolver;
* Called when this object is bound to the HTTP session object.
* @param event The event when the object is bound to the Http session.
public void valueBound(HttpSessionBindingEvent event)
// do nothing
* Called when this object is unbound from the HTTP session object.
* @param event The event when the object is unbound to the Http session.
public void valueUnbound(HttpSessionBindingEvent event)
m_resolver = null;
try
if (m_session != null)
m_session.disconnect();
catch (IfsException e)
e.printStackTrace();
finally
m_session = null; // release the resources
*****************************END INSURANCELOGIN.JAVA ******************************
This code has been changed so that it accepts the four agruments that are required
to connect to the repository and uses them to connect to the repository. Note that
we have provided the complete source code to this file in order to make it simple
to deploy the revised version of the code. Simply cut and paste this
code into a new file called. Save the file on the native file system
in a file called InsuranceLogin.java in the directory
$ORACLE_HOME/ifs/ifsdevkit/sampleapps/insurance/
*************** HERE IS THE REVISED CODE FOR WEB COMMAND APPLICATIONS ************
********************************** LOGIN.JSP *************************************
<%@ page import = "ifsdevkit.sampleapps.webcommandapp.WebCommandLogin" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="Author" content="Patricia Li">
<title>Login</title>
</head>
<jsp:useBean id="wclogin" scope="session" class="ifsdevkit.sampleapps.webcommandapp.WebCommandLogin" />
<jsp:setProperty name="wclogin" property="*"/>
<%
String REDIRECT_PATH = "/ifs/ifsdevkit/sampleapps/WebCommandApp/html/main.html";
boolean loggedIn = false;
if (wclogin.getSession() != null)
// Use existing WebCommand login
loggedIn = true;
else
String username = request.getParameter("username");
String password = request.getParameter("password");
String serviceName = request.getParameter("serviceName" );
String schemaPassword = request.getParameter("schemaPassword");
if (username != null && password != null)
// Login to iFS
try
wclogin.init(username, password, serviceName, schemaPassword);
request.getSession(true).putValue("IfsHttpLogin", wclogin);
loggedIn = true;
catch (Exception e)
%>
<SCRIPT LANGUAGE="JavaScript1.2">
alert("The credentials are not valid; please try again.");
</SCRIPT>
<%
if (loggedIn == true)
// Go to main page...
response.sendRedirect(REDIRECT_PATH);
else
%>
<title>Web Command App Login</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF">
<h2>WebCommand Application Login</h2>
<form METHOD=POST NAME="loginform" ACTION="login.jsp">
<table>
<tr>
<td><b>Username:</b></td>
<td><input type="text" name="username" value=""></td>
</tr>
<tr>
<td><b>Password:</b></td>
<td><input type="password" name="password" value=""></td>
</tr>
<tr>
<td><b>Service Name:</b></td>
<td><input type="text" name="serviceName" value="IfsDefault"></td>
</tr>
<tr>
<td><b>Schema Password:</b></td>
<td& gt;<input type="password" name="schemaPassword" value=""></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>
<input type="submit" value="Log in">
</td>
<td>
<input type="reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
<% } %>
************************* END WEB COMMAND LOGIN.JSP ******************************
This code has been changed so that it requests the four agruments that are required
to connect to the repository and passes them to the login method on the underlying
bean. Note that we have provided the complete source code to this file in order to
make it simple to deploy the revised version of the code. Simply cut and paste this
code into a new file called login.jsp. Copy the File into the iFS repository folder
/ifs/jsp-bin/ifsdevkit/sampleapps/WebCommandApp
****************************WEBCOMMANDLOGIN.JAVA**********************************
package ifsdevkit.sampleapps.webcommandapp;
import java.util.Locale;
import oracle.ifs.beans.DirectoryUser;
import oracle.ifs.beans.FolderPathResolver;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.common.CleartextCredential;
import oracle.ifs.common.ConnectOptions;
import oracle.ifs.common.IfsException;
import oracle.ifs.adk.filesystem.IfsFileSystem;
import oracle.ifs.adk.security.IfsHttpLogin;
import javax.servlet.http.HttpSessionBindingEvent;
* WebCommand application that illustrates the usage of the
* File System API.
* @version 1.0
* @pub
public class WebCommandLogin implements IfsHttpLogin
private LibrarySession m_session; // Session
private FolderPathResolver m_resolver; // Resolver
private IfsFileSystem m_ifs; // File System object
* Default constructor required by the jsp spec for the USEBEAN tag
public WebCommandLogin()
throws IfsException
* Make a connection to iFS
* @pub
public void init(String username, String password, String serviceName,
String schemaPassword)
throws IfsException
LibraryService service = new LibraryService();
CleartextCredential cred = new CleartextCredential(username, password);
ConnectOptions options = new ConnectOptions();
options.setLocale(Locale.getDefault());
options.setServiceName(serviceName);
options.setServicePassword(schemaPassword);
m_session = service.connect(cred, options);
m_resolver = new FolderPathResolver(m_session);
m_resolver.setRootFolder();
m_ifs = new IfsFileSystem(m_session);
DirectoryUser user = (DirectoryUser) m_session.getDirectoryUser();
if (user.isAdminEnabled())
m_session.setAdministrationMode(true);
* Use the existing connection.
* The default constructor does not set the necessary fields.
* @pub
public void init(LibrarySession session, FolderPathResolver resolver)
throws IfsException
m_session = session;
m_resolver = resolver;
m_ifs = new IfsFileSystem(m_session);
* Return the login's session
* @pub
public LibrarySession getSession()
return m_session;
* Return the login's path resolver
* @pub
public FolderPathResolver getResolver()
return m_resolver;
* Return the IfsFileSystem API object
* @pub
public IfsFileSystem getIfsFileSystem()
return m_ifs;
* Implementation of valueBound
* @pub
public void valueBound(HttpSessionBindingEvent e)
* Implementation of valueUnbound
* @pub
public void valueUnbound(HttpSessionBindingEvent e)
try
m_session.disconnect();
catch (IfsException ie)
************************* END WEBCOMMANDLOGIN.JAVA *******************************
This code has been changed so that it accepts the four agruments that are required
to connect to the repository and uses them to connect to the repository. Note that
we have provided the comple te source code to this file in order to make it simple
to deploy the revised version of the code. Simply cut and paste this code into a
new file called WebCommandLogin.java in the directory
$ORACLE_HOME/ifs/ifsdevkit/sampleapps/webcommandapp/
Compile the java class.
Copy the classfile to $ORACLE_HOME/ifs/custom_classes/ifsdevkit/sampleapps/webcommandapp/
Stop and Start all of the protocol servers.
This issue will be resolved on the next drop of the Oracle Internet File System
development kit.
#3. Making the BaseRendererClass available to the Protocol Servers
Note this step is not required if you have the 1.0.8.3 patch set installed.
Install the BaseRenderer Class. The BaseRenderer class is delivered in the jar file
ifsdevkit.jar and can be used to simplify the task of creating a custom renderer.
Unfortunately the jar file containing this class is not referenced in any of the Classpaths
used by the iFS protocol servers. This means that they will not be able to load any
customer renderers that extend BaseRenderer. In order to make BaseRenderer available
to the Protocol Servers it need to be placed in the appropriate directory under
<ORACLE_HOME>/ifs/custom_classes.
Extract the class from the ifsdevkit.jar.
ifsdevkit.jar is located in <ORACLE_HOME>/ifs/lib after the devkit has been installed.
jar -xvf ifsdevkit.jar
extracted: META-INF/MANIFEST.MF
extracted: BaseRenderer.class
Create the following directory heirachy in <ORACLE_HOME>/ifs/custom classes
oracle/ifs/server/renderers
Copy <ORACLE_HOME>/ifs/lib/BaseRenderer.class to
<ORACLE_HOME/ifs/custom_classes/oracle/ifs/server/renderers
That should do it.
Regards
Mark D. Drake
null

Moving to Top

I tried to install the latest version of Itunes and now I cannot open it because I receive a message that says this version is corrupt It says to reinstall and I have no idea what to do Any help is appreciated

I tried to install the latest vversion of Itunes and now I cannot open it because it says this version is corrupt and I should reinstall it. I have no idea what to do. Any help will be appreciated. Thanks

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Installing the IDE Kit

Similar Messages

Maybe you are looking for