Installing the just released 10.2.0.2 agent on Solaris Sparc

Anyone tried installing the new 10.2.0.2 agent on Solaris Sparc? (Solaris 9). After the agent installs the config fails and I found a bunch of binaries (like emagent) are zero length.
Didn't have any issues installing the previous 10.2.0.1. It took so long for the 10.2.0.2 agent to be released for Solaris, I'm wondering if there's an issue with the package.

Hi all,
Since you all have already gone through upgrade process from 10.2.0.1 to 10.2.0.2,
I need help doing the same.
We have 10.2.0.1 Grid Control installed in test env (solaris 5.9 Sparc), and I am planning to upgrade it to 10.2.0.2.
My question is, when we shut down OMS to apply 10.2.0.2 patch, what happens to the agents? they will not be able to upload the stats, and may get inactive after reaching the disk usage limit.
Also, when we complete the upgrade patch, when OMS comes up, can the 10.2.0.1 agent still talk to the 10.2.0.2 OMS? I am asking this from the logistical point of view. We have 15 servers, and it may be couple of days, before all agents can be upgraded. In that scenario, I wish to keep the Grid Control available for testing barring the agents under upgrade.
We havenot turned on the automatic patch management, and tempted to use the Method 2 of 4.1.2.1 item of the Readme document of the patch.
What were you experiences? and any advices?

Similar Messages

  • Problems installing 10.2.0.5.0 grid control agent on Solaris 9

    I'm getting the following error when attempting to install the 10.2.0.5.0 grid control on Solaris 9:-
    java.util.zip.ZipException: invalid entry size (expected 1590760 but got 1589445 bytes)
    at java.util.zip.ZipInputStream.readEnd(Unknown Source)
    at java.util.zip.ZipInputStream.read(Unknown Source)
    at java.io.FilterInputStream.read(Unknown Source)
    at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1460)
    at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1426)
    at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1315)
    at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1274)
    at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1229)
    at oracle.sysman.oii.oiix.OiixFileOps.copyStreamFromJar(OiixFileOps.java:1160)
    at copyActionHelper.copyFile(copyActionHelper.java:1688)
    at copyActionHelper.copyFileFromStream(copyActionHelper.java:722)
    at copyActionHelper.copyFileFromJar(copyActionHelper.java:632)
    at copyActionHelper.copyDefaultFiles(copyActionHelper.java:545)
    at copyActionHelper.copyGroupFromJar(copyActionHelper.java:173)
    at copyActionHelperux.installCopyGroupAction(copyActionHelperux.java:158)
    at sscopyGroupFromJarux.installAction(sscopyGroupFromJarux.java:89)
    at oracle.sysman.oii.oiis.OiisCompActions.doActionWithException(OiisCompActions.java:2074)
    at oracle.sysman.oii.oiis.OiisCompActions.doActionImpl(OiisCompActions.java:1731)
    at oracle.sysman.oii.oiis.OiisCompActions.copyGroupActionInner(OiisCompActions.java:1400)
    at oracle.sysman.oii.oiis.OiisCompActions.copyGroupAction(OiisCompActions.java:1128)
    at oracle.sysman.oii.oiis.OiisCompActions.doAction(OiisCompActions.java:863)
    at Components.oracle.jdk.v1_5_0_17_0.CompActions.doAction(Unknown Source)
    at Components.oracle.jdk.v1_5_0_17_0.CompInstallPhase1.doActionP1copyGroup4(Unknown Source)
    at Components.oracle.jdk.v1_5_0_17_0.CompInstallPhase1.stateChangeActions(Unknown Source)
    at Components.oracle.jdk.v1_5_0_17_0.CompActions.stateChangeActions(Unknown Source)
    at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE$OiifwComponentIP1WCCE.performStateChangeActions(OiifwInstallPhaseWCCE.java:1686)
    at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE$OiifwComponentInstallPhaseWCCE.doOperation(OiifwInstallPhaseWCCE.java:1083)
    at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE$OiifwComponentIP1WCCE.doOperation(OiifwInstallPhaseWCCE.java:1655)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
    at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE.doOperation(OiifwInstallPhaseWCCE.java:612)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
    at oracle.sysman.oii.oiif.oiifw.OiifwActionsPhaseWCDE.doOperation(OiifwActionsPhaseWCDE.java:607)
    at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
    at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3878)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
    at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1286)
    at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
    at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
    at oracle.sysman.emgc.oneclick.OneClickWizard.runOuiInstaller(OneClickWizard.java:458)
    at oracle.sysman.emgc.oneclick.OneClickDirectory.runInstaller(OneClickDirectory.java:165)
    at oracle.sysman.emgc.oneclick.OneClickInstaller.runInstaller(OneClickInstaller.java:209)
    at oracle.sysman.emgc.oneclick.OneClickInstaller.doCompletion(OneClickInstaller.java:243)
    at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:269)
    at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:383)
    at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:700)
    at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:391)
    Before the installer gets to this stage there are o/s prerequisite checks that fail. Has anyone encountered this before ?

    Thanks, I was going to say that there should not be any problems with my zip file having used it to successfully install the agent on Solaris 10, however havign run teh cksum again, it would appear that the file has somehow got corrupted. Thanks for pointing me in the right direction.

  • Why is there no Knowledgebase article for the just-released IE11 update KB3025390?

    The KB link shown in the Windows Update page for my Windows 7 x64 Enterprise machine does not find a page for that KB article. What exactly are we patching? What is it supposed to fix?
    Dr. Technical Any sufficiently advanced technology is indistinguishable from magic. -- Arthur C. Clarke

    Hello from japan, I've been in trouble, just like you. (jp-Forum)
    In my case, Windows 7 + Access VBA + IE11, also an Access Denied in a frame after installing the KB3025390, and it resolved with uninstalling.
    I made a reproducible prototype;
    [test.vbs]
    Set objIE = CreateObject("InternetExplorer.Application")
    objIE.Visible = True
    objIE.Navigate "(full path)\hello.html"
    WScript.Sleep 3000
    '******* It works good
    objIE.Document.All("btn1").Click
    objIE.Navigate "(full path)\frameset.html"
    WScript.Sleep 3000
    '******* it will fail "Access Denied" after installing the KB3025390
    objIE.Document.Frames.Item("frame1").Document.All("btn1").Click
    [hello.html]
    <html><body>
    <input id="btn1" type="button" value="Hello" OnClick="alert('Hello World')">
    </body></html>
    [frameset.html]
    <html><frameset rows="20%,*">
    <frame id="frame1" src="hello.html">
    <frame id="frame2" src="about:blank">
    </frameset></html>
    Please help us, thank you.

  • Anyone installed the new patch (3.0.9.8.3) on Solaris yet?

    Well, I have the patch, and I am happy to see many of the bugs I was concerned about have been addressed, most particularly the many performance issues.
    It looks like this patch was released over the weekend. I would love to hear from someone who has already applied this patch, and what sort of differences you noticed in your environment afterwards.
    Thanks!
    Adrian Klingel

    I have applied patch set 2452260 which upgrades portal to 3.0.9.8.3 and mod_plsql 3.0.9.8.3c, and 2244167 to fix some Jserv bugs. No problem during installation. The problem now I am facing is "performance". It is taking 20-25 seconds to get the very first login page as opposed to 3-4 seconds before patch. After login everything looks fine. There's a bug report for this(2391402). Note 198379.1 suggests using "BrowserMatch "MSIE" nokeepalive downgrade-1.0 force-response-1.0" in httpd.conf to force all Microsoft IE not to use "keepalive" feature. Similary "KeepAlive off" works. However, it works very well only with "http". "Https" gets extremely slow with this. I am working with Oracle regarding this issue.
    Whoever fix this problem, please email me at [email protected]
    Ubee

  • Able to install Acrobat 9.1 over the pre-release build

    I am able to install Acrobat 9.1 over the pre-release build, however, the release notes say otherwise i.e. to un-install the pre-release build before installing the 9.1 release. Let me know whether to log a bug for the same.

    I do not have posting privileges on that forum. I did use the forum to send a message to Apple but have not got a reply yet.

  • How to re-install the product

    Ok - I'm pretty sure this is a user inflicted error, but I just downloaded and installed the latest release.
    Now two things happen. each time I open eclipse it takes a loooong time as it thinks it needs to rebuild the world. Second, after the long time I get a popup window with the following stuff
    (opps it didn't copy into the clipboard ) - but there are a bunch of couldn't load nitrix .... classes.
    Once I get this error, I close eclipse, restart it and aside from the fact it wants to rebuild everything will eventually work.
    I think I've messed up eclipse - If I want to uninstall eclipse, and start over from the begining, what steps do I need to do to not mess up my license?
    thx
    ed

    Hi,
    What is your eclipse version? And are you using NitroX latest build 411? The reason is AppXRay scanning has been enhanced, for more details refer to http://www.m7.com/whatsnew.do
    Before you un-install please send the logs to [email protected]
    * goto your workspace - ..eclipse\workspace\.metadata - .log file
    * goto <NitroX Install Folder>\NitroX\eclipse\plugins\com.m7.nitrox_2.x.x - m7.log.0 file
    Once I get this error, I close eclipse, restart it and aside from the fact it wants to rebuild everything will eventually work.Do you mean that for some launch instance the NitroX plug-in fails to load and subsequent launch works fine?
    FYI: NitroX License persists switching between different NitroX build Or different versions of eclipse.
    So, just uninstall NitroX + Eclipse and then re-install.
    Thanks
    M7 Support

  • Can i un-install the old versions after 2014 update

    I now have 3 versions of every application installed on my desktop,
    CC
    64bit
    (2014)
    can i un-install the old versions after 2014 update?
    aldo I have a 64bit platform is the new (2014) 64bit or do I have to install that version????!!??

    We don't overwrite your apps so you can keep previous workflows.
    Delete apps you don't want when you are ready.
    Please refer to:
    https://helpx.adobe.com/creative-cloud/faq.html#deskApps
    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.htm
    Regards
    Rajshree

  • PhotoKit Sharpener 2.0 just released-System requirements?

    As hard as I looked, I could not find on the PixelGenius site either the "What's New" or the "System Requirements" for the just released PhotoKit Sharpener 2.0.  (The PDF User Guide won't download.)
    • Has anything other than 64-bit functionality been added in terms of features or new algorithms?
    • Is this new version Tiger/PPC compatible?  (CS4)
    Thanks in advance.
    Wo Tai Lao Le
    我太老了

    Herb 19 wrote:
    Found that my CS5 in 64 bit mode does not provide access to change dimensions in the output sharpener module of Contone and Inkjet. However in 32 bit mode this is ok. Here is a screendump of the plug-in running in the 64 bit CS5.
    This is a feature, not a bug...as we said in the manual (I think it's in there) you need to have your units set to Inches or CMs (unit dimensions) NOT pixels in order to resize. In Contone and Inkjet, we allow resizing WITHOUT resampling because we feel it's important to maintain the native pixel dimensions of the image.
    So, if you change the size (assuming a unit other than pixels) the resolution will change to maintain the original pixel count (same as doing a resize in Image Size with resample off).
    For Halftone, we DO allow BOTH resizing AND resampling because when you prepare an image for halftone repro, you DON'T want to send TOO many pixels at the line screen. So we suggest resizing and downsampling to get you images in the 1.5-2.5 (max at 2.5) PPI to LPI ratio. We really do suggest 2X as the optimal.
    For Web and Multimedia, we allow resampling but since the web and screen display is designed for 1 image pixel for 1 screen pixel (assuming "72 pixels" but in reality it's whatever the display really is).
    We just realized today that we didn't explain the Halftone Output Sharpening correctly in the manual...sorry about that. We're actually planning on putting up some sample workflows on the web site and preparing images for halftone output will be one of them!

  • Installing the 2.0 SDK - says I already have that version, but I don't

    I have installed a beta version the SDK. Trying to install the GA release gives me the message "You already have this version installed."

    So lame! I had the same problem, and unfortunately the solution is not nice. I uninstalled the old beta, and then went through the registry and removed everything that said "javafx", then reinstalled with the latest JavaFX. Believe me, I'm not happy about this :-(.
    Thanks
    Richard

  • Chinese Nokia OS: is it possible to install the en...

    I have a N73 bought in china since i was working there for a while. Now i am back in europe (Italy) and i'd like to install the italian Operative System. Is it possible? I did a software upgrade but it installed the chinese release. What can i do?
    Thanks

    The software updater supplies the version for your specific product code. Because it's a Chinese version, NSU will always provide the Chinese version.
    Unfortunately, your phone is stuck in China.

  • Update iPad from beta 7 to the full release?

    My iPad is saying that it is up to date in iTunes as well as the over the air Software Update section on the iPad itself. How do I get it to download and install the final release version of iOS5?

    b7 won't go to PR...
    You should have already downloaded the GM from the Dev Center, studied the release notes and followed the process - use the resources you paid for as a registered Developer. _If_ you're registered...

  • Installed the 335.23 nvidia drivers. After Effects now says incompatible device.

    I installed the recently released 335.23 drivers for my GeForce GTX 770 and I noticed Adobe After CC now reports the device as incompatible. Any reason why this is? Is it the cause of the new drivers?

    What exact version of After Effects? What operating system? What CUDA version?

  • How to install the Sun Directory 5.2 p4 on Solaris

    Hi i have downloaded the ds 5.2 p4 from the Sun Site and un zipped and un tared the file and i got a ds[1].5.2.p4.solaris.sparc.full .
    How to run this?
    i tried running with the following command
    ./ds[1].5.2.p4.solaris.sparc.full
    it gives me Syntax Error on line 1.
    Any ideas how to proceed with the installation?
    Thanks,
    Ram

    Just to correct my previous message
    When i tried to gunzip the file am getting
    gunzip: ds[1].5.2.P4.Solaris.SPARC.full.tar.gz: invalid compressed data--format violated
    Does it mean it a corrupt binary?
    has any one successfully installed it?
    Thanks,
    Ram

  • HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Hi there!
    Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us;  working on it!"
    Message was edited by: MacLuc

  • I just got the Itunes update. So frustrating. I will be trying methods on this forum to save my library and re-install the older version of ITunes. What was Apple thinking when they developed and released this mess?

    I just got the Itunes update. So frustrating. I will be trying methods on this forum to save my library and re-install the older version of ITunes. What was Apple thinking when they developed and released this mess?

    Apple is more likely to see your comments if you send feedback via:
    http://www.apple.com/feedback/itunesapp.html
    =Downgrading from iTunes 11 to iTunes 10.7=
    You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404).  Alternatively:
    Back up your computer first, in case the unexpected happens.
    Quit iTunes.
    Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at:  http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
    Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394.  Do steps 3 and 4.  Steps 6-8 may be also useful but I don't know if they are essential.  Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
    Replace the iTunes 11 application with iTunes 10.7.  Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved.  Two ways to do this are:
    1.  Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
    2. Check this reference on how to delete the iTunes application itself:
        Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
        After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7.  I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
    AirTrafficHost.framework
    CoreFP.framework
    DeviceLink.framework
    iTunesAccess.framework
    MobileDevice.framework
    After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl"  and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since.  See:
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Other issues:
    - https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
    - If you encounter error -42408:
    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
    Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested).  A  variant of this is at: https://discussions.apple.com/message/20448184
    - Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

Maybe you are looking for