Installing the PDF option with Robohelp 7
When you install Robohelp 7 you are presented with an option
to install a PDF creation option along with it.
Every time I try to do this the installation fails with a
message that says the installer found a more current product
installed, and hence will abort the installation. The problem is
that I have no idea what this more current product is, and how to
remove it. Any advice would be appreciated.
I have seen situations in which Adobe Reader caused an
installation conflict.
Imagine that a user installs Adobe Acrobat 5 when it is
released. Then, version 6 is released. The user sees no need to
upgrade Acrobat but does install Reader 6. Version 7 is released.
The user upgrades the Reader but not Acrobat. Version 8 is
released. The user upgrades the Reader but not Acrobat. Later, the
user is offered a copy of legimate upgrade of Acrobat 7. The user
attempts to install it. The installer sees Reader 8 and halts the
installation. (I suspect that the problem is related to Acrobat and
Reader being developed from the same codebase long ago.)
On several occassions, I have encountered this issue and
successfully resolved it by using the following method. Uninstall
Reader; start with highest version number and work backward to
lowest. Reboot. Uninstall Acrobat; start with highest version
number and work backward to lowest. Reboot. Install Acrobat;
install latest full version first, then install updates (start with
lowest numbered update and work forward to highest). Reboot.
Install Reader; install latest full version, then install updates
(start with lowest numbered update and work forward to highest).
Reboot.
This is a time-consuming process, but it has always worked
for me.
Similar Messages
-
I have a new computer with Windows 7 professional, Office 2007, Adobe XI. I have just created a word document and tried save it as a PDF but the PDF option doesn't appear in the drop down menu. Any ideas please? Thank you.
What is "Adobe XI" - Reader, or Acrobat?
But either way, 'Save as Adobe PDF' is a Word function, independent of what Adobe software you have installed. -
How do i install the pdf printer
How do i install the pdf printer
And on what system? Using what version of Acrobat? Sounds like the typical "I have an Acrobat version from the stone age and want to install it on Win7/ Win8" and if that's the case, you should stop wasting time and just byuy a new license. Anything before Acro 9 is not compatible with these OSs.
Mylenium -
Can I use the pdf fax with a DSL line
Can I use the pdf fax with a DSL line and, if so, how do I get the pdf fax modem to appear in my printer options? No Modems appear in my Modem pop-up menu.
Thanks,Should I be able to fax using the internal fax software if I set it up with the proper settings?
Yes, if it's not a purely Digital line, dial that FAX number on your Phone, does it answer with a screech?
Must I disconnect all my other lines in order to use this?
No, you shouldn't need to... do you have DSL Filters on all lines except the DSL connection, like these...
http://www.twacomm.com/info/DSL_Filters.htm
Oh, it's not clear, do you have 2 actual Lines/Phone numbers, or do they share the same line? -
Name the PDF file with a field name
Hi,
I'm new to ES2 and Form creation in LiveCycle, my knowledge in scripts is very less or none i can say, if any one out there could help me out with this i'd be greateful.
I have created a fillable PDF Form using LivecCycle ES2 and would like to know how to name the PDF file with a field value from the form when " save form " or " submit " button are clicked.
Thanks in advance.
Mithun.M.IYou can save the form with name generated from a field's value, but therefore you will have to install a folder level script first and design a custom save button in your form.
You cannot do this with the applications save or save as... buttons, and you also cannot rename a file on submit.
Here's an example form and a folder level script. (Maybe to complicated fdr newbies)
http://thelivecycle.blogspot.com/search/label/Save -
Installing the PDF Printer only ?
Hello,
We bought a bunch of Acrobat license for most of our users and we want to have some of the users using the Full product, while most of users should only have the right to print to PDF.
I have been trying to install the PDF Printer only using the "Custom install" option from SETUP.EXE, but I can't install only the printer. Acrobat Standard will always get installed.
Is there anyway I can install only the Printer and not the full Acrobat product?
Thanks,
ChristopheIs installing a separate PDF software printer the only way?
Depends on what application you want to do this for. For some applications there are third-party action downloads available that can allow you to, for example, export InDesign files to a specified folder in PDF. -
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
How do I install the PDF printer in Acrobat Standard 10.1.12??
Updated to Acrobat Standard 10.1.12 a week ago and noticed that no PDF printer was installed. How do I install the PDF printer??
Sara,
Yes I’m running Windows 7 (64-bit). I went to the web site and followed the Add Printer instructions. I tried all of the Adobe PDF Converters and I got either one or the other of the two messages in the attached file. I appreciate your help and hope you’ve got other ideas. By the way, I’ve already completely un-installed Acrobat Standard X and reinstalled. No joy. When I got this PC I had to install this version of Acrobat on the machine and I had no problems like this. I have also applied several updates to my original version of Acrobat Standard X and I never had this issue. This issue just came about when I applied the 10.1.12 update. But the un-install and re-install has not fixed the PDF printer issue.
So, hope you’ve got some other magic. It does seem like some needed Adobe software is missing or there is something else on my machine that is impacting the proper installation of the Adobe software pieces (or not allowing some pieces to install).
Thanks for your help,
Nick -
How to fix the .pdf file with error "invalid annotation object"
how to fix the .pdf file with error "invalid annotation object"
As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.
-
Hello, I am trying to send an email where the recipient opens the PDF file with a password, can anybody show me how to do that
Hi surez,
To password protect a PDF file, you need to use Acrobat. If you don't have Acrobat, you can try it for free for 30 days. See www.adobe.com/products/acrobat.html for more information.
In Acrobat, you choose File > Properties when the document is open, and then click the Security tab to set up a password.
Please let us know how it goes.
Best,
Sara -
Where should i store the PDF booklet with an album in itunes?
I ripped a CD with iTunes and would like to store the booklet as a PDF with it.
I know how to assign the cover art as JPG to the tracks / album, but I cannot find a way to store the PDF booklet with it.
(I guess, I could store a number of JPG's with the album, one JPG per page of the booklet, but that seems not to be the right way to me.)
Nay kind of insights and/or suggestions will be appreciated.
Best regards,
Gabriel.Lightroom itself will not help you with pdf, word, etc.
However, there is a plugin you can use called AnyFile which will allow you to manage these documents in Lightroom (by assigning keywords and other metadata) so that you can search for all documents (photos, pdf, word, music, powerpoint, etc.) with given metadata.
Because you do this via metadata, it doesn't matter where you put these files. Put them anywhere you want. -
How can I open and listen to the PDF documents with audio in my iPad?
How can I open and listen to the PDF documents with audio in my iPad?
You need to use a PDF reader that supports multimedia. Adobe Reader 10.3 does not. Adobe has not stated whether it will support multimedia in the future.
In the meantime, you could buy an application that does like PDF Expert. Read about it here:
Finding the Best Tablet PDF Reader -
I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.
I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben -
Please help: Utility used to install the update failed with exit code {0}.
Hi,
I admit to being a relative newbie at Solaris 10 administration, so please exercise forbearance on my behalf.
I have just installed Solaris 10 11/06 on my laptop x86. Everything went fairly smoothly. I used the Installation Check Tool 1.2 to decide if my machine was adequate to run the OS and with the exception of a NIC driver, it was. I downloaded the sfe driver and configured networking and it seems to work exceptionally well. However, when I run Update Manager in JDS (the only way I know how to run it), it fails to update some of the packages. Sometimes, if I retry the same packages, sometimes it will eventually work. But it keeps failing with the following error on a consistent basis over the last several days:
Utility used to install the update failed with exit code {0}.
I hunted around on the web and the results were not promising. Is there a log somewhere that will give me the actual error or do y'all know of a quick fix.
Thanks,
WillThat is strange indeed, could you try downloading and
applying the unsigned zip to see if that works?The problem persits:
# patchadd -M /root/119116/
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119116-22
Preparing checklist for non-global zone check...
Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting.
Maybe you are looking for
-
Data conversion strategy for new SOB
Dear Viewers on 11.5.10 We are creating a new SOB with a change in currency from Feb-11 as this is the requirement For the same, we need to do data conversion. I have a confusion for Purchase Orders and Sales Orders Purchase Orders: Open purchase ord
-
my computer had a virus, so I set it back to it's orginal state. I used the backup hard drive to download everything back on. ITunes: account shows up let's me log in, says all my files are there, but nothing is showing up, no music at all, none o
-
Quick review of 10.9 upgraded from 10.6.8 on older MBP
Hello all, I just upgraded two laptops a MBP15 5,4 and a MBP13 8,1/SSD to 10.9, both from 10.6.8. both have 4GB RAM I read a lot of issues, install problems, slow machines etc, etc. Here's what i found. Folks here talked me out of doing a clean inst
-
Hi. My Ipad2 is being reseted each 1 minute of use and then I found this description "resetcounter(date and time).plist". Someone knows what this means and how to avoid this? Many, many thanks. iPad 2
-
What Can Be Done To Minimize "Loading" Times
We all know that Lightroom loads a rough very of the photo before loading the full detailed version. Is there anyway to speed that up? I've tried leaving Lightroom running to pre-load all the photos in my film strip, but it only seems to do final loa