Installing the printer takes a long time and then the installation fails

Installing the printer takes a long time to complete installation and although I used Genuine disk and a new printer
System Windows 8
Please help
Is there could be missing from the file system
How to Get it

Hi,
What is your printer model?
Do you try installing it via USB or through the network?
Does the installation stalls or hangs before or after selecting the crequired connection type for the printer?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • When I search, it takes a long time and then I get a connection time out error. What do I do?

    error: cannot communicate with bing.com (204.152.194.204)

    Bring up System Preferences and look at the bottom of the window. If there is software listed there, make sure you have the latest version that runs on OS X 10.7 Lion. Then go into users and look at login items. Same thing, ensure that any software listed there is at a level to run with OS X 10.7 Lion.
    While Lion has a minimum requirement of 2GB of memory, 4GB is recommended.

  • My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

    My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

    Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
    When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
    So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

  • Spool printing takes a long time for just one user

    Hello,
    Could someone please guide on what could be the reason that spool printing takes a long time for just one user ?
    I've monitored all the spool processes through SM50, and I've found that a very long time elapses before the printing job appears in one of the four spool processes.
    Thanks in advance.
    Reda

    Hi,
    very long time elapses before the printing job appears in one of the four spool processes.
    can u check the trace file(Red color error) of that spool process. Also can u see if there are any system logs in SM21 related to that spool request.
    Also see how many pages the user is giving print @ 1 shot. Suppose if the printer to whcih the user is giving print is a network printer, see the network response time.
    Have u tried to ask the same user to give print to some other printer. Also have u asked some other user to print to that problematic printer. Check the responses under this scenario also.
    Regards,
    Ravi

  • Creation of Transfer Order takes a long time and finally throws spool error

    Hi,
    I create Sales Order of type OR. I do delivery successfully. But when i proceed to create Transfer Order, it takes painfully long time and finally after painful 30 mins or so, it throws a error message, 'Error in spool call' with a blank page. I click on save icon and transfer order is created.
    But the creation takes very long time. I checked SP01 and there are no requests.
    Any suggestions will be rewarded.
    Regards,
    Mangesh

    Dear,
              Kindly contact your Basis team it will help you.
             After error please take the screen short of SU53 and give to basis team.
    May be it will help you.
    Regards,
    Sandip

  • I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted

    I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted.
    is there a way to stop it in the middle so it does not go through the whole process

    It's called, "FileVault." If there is no option to stop the process, then the best bet would be to wait until decrypting is finished. Otherwise you run the risk of borking the whole thing. It's hard to imagine how you can accidentally turn off FileVault.

  • We are using apple tv to try to access our itunes account on the computer.  We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store.  Any ideas on what we are doing wrong?

    We are using apple tv to try to access our itunes account on the computer.  We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store.  Any ideas on what we are doing wrong?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • I can not sync with itunes iphone , is catching, and when it begins to sync is a long time and then appears a message that no time to help sincronização.Me am without some music

    I can not sync with itunes iphone , is catching, and when it begins to sync is a long time and then appears a message that no time to help sincronização.Me am without some music

    You are correct.  Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases.  You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again:  Windows XP or Windows Vista/7.

  • My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help.  If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
    The black dot problem may mean you need to reset your iPod.  If that does not help, it may need service by an Apple Authorized Service Provider.
    If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
      http://www.apple.com/support/ipodtouch/
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • Query takes very long time and analyze table hangs

    Hi
    One of the oracle query taking very long time (ie more than a day) and affecting business requirment of getting the report in time.
    I tried to analyze the table with compute statistics option, however it hangs/runs forever on one of the huge table?
    Please let me know how to troubleshoot this issue

    Hi,
    What's your Oracle version?
    You should use DBMS_STATS package not ANALYZE..
    Regards,

  • WE05 takes a long time and ended with error message: time out

    Hello,
        When user trying to use WE05 transaction it takes more time and ended with error message time out.In the WE05 tranaction even i tried with minimal search options(like for just 2hrs duration,for one day) still getting the same error.I think there must be problem in EDIDC table.
       Please suggest solution for this????
    Regards,
    Loki.

    You have to enter the selection ctiteria on WE05, might be there is a huge data on these tables. So the best option is to enter the selection criteria as much as you can to get the IDOC list. Also check the sie of EDIDC table and analyse the number of IDOC on that table. Make sure that index are updated of the table
    Regards,
    Subhash

  • I have an old iPod Classic that still works fine but it is having difficulty establishing a connection to my computer.  It will make an incomplete connection but it takes a long time and the computer hangs up until the connection is made. iTunes can't see

    I have an old iPod Classic.  It still plays the music on it out of either port.  It is having trouble connecting to my Windows 7 (64bit) computer.   It takes about 30 seconds or more to connect and hangs the computer until it does.  Even though it shows up in connected USB devices and in Windows explorer it doesn't seem right.  Sometimes it does not make a connection and when it does make a connection iTunes cannot detect it, even though iTunes sometimes automatically launches when I plug in the iPod.  I've tried two different sets of cables with the same results.

    Check the iPod Hardisk health with the iPod  Disk Diagnostic, as posted by tt2
    https://discussions.apple.com/message/17776595#17776595
    It wont fix your problem, but may tell help troubleshoot, why it is freezing iTunes, especially when the Pending and Realloc numbers are high.
    have a nice day!

  • Time machine takes very long time and does not finish the backup

    Hi,
    Time machine is unable to backup my 2014 Mackbook Air 128 GB Drive anymore.
    I have tried numerously to initiate a backup but it could only backup a very small volume, less than 1KB, then stall for hours without any progress.
    I tries to repair my volume, using the Disk Utility, but it still does not backup, except for the 1K progress.
    I have noticed that "Spot Light" indexing is also taking forever.  It has been indexing for days without any pogress.
    What is going on.
    What should I do to fix it.
    My latest successful backup was on Jul 25.
    Please help.
    Thanks.
    Tareq

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • KE30 Report:-Takes very long time and ends in a Run time error

    Hi Expert,
    Since last three  week (after up gradation of system) we are not able to run any of KE30 reports in Production system and its end with Run Time Error. Even in development system where data is minimum it is taking 45 Minutes to give output where it should take maximum 4-5 Minute. Before up gradation it was working fine
    What could be the reason for this and how can i resolve this.
    Thanks in Advance
    Bipin Tiwari

    HI Sridhara
    Thanks for quick response. After Up Gradation we ran SGEN T-code but no impact on system performance. There after we build new summarisation level in KEDVP (system proposed) and activated it but still it is taking 30-.35 minute to generate the report in Development system which should normaly take 1-2 Munite.
    Can you suggest what else we can do or is there any better way for build summarisation level  in given scenario.
    Best Regards
    Bipin Tiwari

  • When i stay on another tab for a long time and then goes back to the facebook tab, firefox will open the tab for about 5-10 seconds...it looks like a lag

    if i use firefox and open tabs, the moment that i go back to the facebook tab, it would take firefox 5-10 seconds to open the facebook tab.it's really annoying

    That is most likely caused by Firefox releasing memory used in that tab to minimize the memory that is currently in use.<br />
    This includes memory that stores the DOM tree and that tree needs to be rebuild to allow navigation scrolling and clicking items on the page.<br />
    On complicated pages that have a lot of elements this can take a few seconds.
    See also:
    *http://blog.kylehuey.com/post/21892343371/fixing-the-memory-leak about:khuey - Fixing the Memory Leak

Maybe you are looking for