Installing Thinkvantage software for the first time

I have a T60P that I'm going to be selling. It originally came with XP and I installed Vista Ultimate on it and had the Thinkvantage software working on it. But I need to remove most all of the user programs, so I've done a clean install of Vista. I now want to re-install all of the Thinkvantage software on it. Without TVSU it's a REAL pain. I've downloaded all of the 32-bit Thinkvantage Vista drivers and software and have installed it on the computer, but many things won't work.
Is there an easier way to get all of the approriate Thinkvantage software installed?
Thanks,
Bert

Hi Josh,
I would like to add few things with above suggestion
For a new key code :
Request key codes for new orders via SAP Marketplace (SMP), will receive a download letter on new purchases providing them with their SMP login credentials. Using these credentials you can login and click in the "Keys & Requests" tab > Request a License key .
If your existing Key code does not work :
You need create a customer message [https://websmp107.sap-ag.de/message] using component XX-SER-LIKEY-BOJ .
Hope this helps,
Regards,
Shweta

Similar Messages

TS3406 did a upgrade to the software for the first time. .

did a upgrade to the software for the first time. Now when someone calls me the phone go straight to voicemail.. I never know someone is calling me...if they person hangs up and call right again I will get the call instead of the call going to voicemail.

Check the Apple article below.
http://support.apple.com/kb/HT5463

Installing crystal reports 9 for the first time

Hi,
I am trying to install Crystal Reports 9 for the first time. We just received a package with 4 envelopes including Crystal Reports 9 Advanced, Standard, Professional, and Developer. Each envelope also includes Crystal Enterprise Report Appliation Server which I don't think I need (or I'm not sure). I have read a little bit on how I can go online to the SAP Service Marketplace and request license keys. I have not requested a permanent license key yet. I believe that I can install Crystal with a temporary key and then input the permanent key later. What I have done is insert the installation CD for Crystal Reports 9 Developer and then input the product key code found on the back of the Crystal Enterprise Report Application Server CD cover that was packaged with the Crystal Reports 9 Developer CD. However I get a message saying that the product key code is not valid or has expired. There is no product key code on the cover for the Crystal Reports 9 Developer CD but there is one on the Crystal Enterprise Report Application Server CD cover so that is why I input it.
Why is this key code expired? Please note that I am installing on a test PC before I install on the PC of the user who will be using Crystal for work purposes. Therefore I wanted to just install with a temporary key if there is such a thing at this time.
thanks
JW

Hi Josh,
I would like to add few things with above suggestion
For a new key code :
Request key codes for new orders via SAP Marketplace (SMP), will receive a download letter on new purchases providing them with their SMP login credentials. Using these credentials you can login and click in the "Keys & Requests" tab > Request a License key .
If your existing Key code does not work :
You need create a customer message [https://websmp107.sap-ag.de/message] using component XX-SER-LIKEY-BOJ .
Hope this helps,
Regards,
Shweta

Installing UPK 11.0 for the first Time

What ports need to be opened when you install UPK 11.0 for the first time on Windows?

Here are some default ports for you just for reference. The install docs give you no port information whatsoever. :o)
Default Ports:
Oracle: 1521
Microsoft SQL: 1433
Web Server: 80 (recommended 443)
If you are going to connect through 443, port 80 is not needed
Remember as a heads up, if you plan to publish a friendly DNS name and use windows authentication, read this KB article, a reg edit will be required for this to work.
http://support.microsoft.com/kb/896861
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
Right-click MSV1_0, point to New, and then click Multi-String Value.
Type BackConnectionHostNames, and then press ENTER.
Right-click BackConnectionHostNames, and then click Modify.
In the Value data box, type the host name or the host names for the sites that are on the local computer, and then click OK.

Installing a new forest for the first time in 2008 R2 SP1

Installing a new forest for the first time in 2008 R2 SP1 with no other forests present do I run:
E:\support\adprep\adprep /domainprep
or any other adprep to get the forest ready using the Answer File:
[DCINSTALL]
InstallDNS="Yes"
NewDomain="Forest"
NewDomainDNSName="mysite.com"
DomainNetBiosName="MYSITE"
ReplicaOrNewDomain="Domain"
ForestLevel="4"
DomainLevel="4"
CreateDNSDelegation="No"
DatabasePath="C:\Windows\NTDS"
LogPath="C:\Windows\NTDS"
SYSVOLPath="C:\Windows\SYSVOL"
ConfirmGc="Yes"
SafeModeAdminPassword=""
RebootOnCompletion=Yes

Hi,
As per your statement, there aren't any other forest which mean you are creating a new AD forest in windows server 2008 R2 SP1.
You don't need to run adprep then. Just run dcpromo on the server and select new forest and provide a Domain Name and follow the instruction.
Regards..
Himanshu Rana
MCTS|MCSE|MCSA:Messaging|CCNA

IPhoto nightmare. Tried to import photos using Nikon software for the first time and all my photos disappeared from iPhoto 8.1.2 (and everything from itunes too). Newly reinstalled iPhoto crashes as soon as I import anything now.

Macbook OSX 10.5.8, iPhoto 8.1.2. I just tried to import some photos using Nikon software (View NX2) for the first time. When I next looked into iPhoto it was empty (so was iTunes but that's another story). I had backed up photos fairly recently but don't use time machine. Searched in vain everywhere and must have done something wrong because iPhoto wouldn't then open at all, saying it was unreadable. After a lot more attempts to recover I uninstalled iPhoto and the receipts and reinstalled from my original disc. It seemed to be ok and imported some photos from my iphone but as soon as the import is complete iPhoto crashes and when opened again it is empty. Have tried this several times and have shut down and have tried rebuilding with the alt and cmd buttons but nothing seems to help. Any ideas?

not a reply but not sure how to add something to my own thread! It seems that Desktop was damaged too as when I try to open it a screen says there is no application selected to open Desktop with. No idea what I should choose! Any help appreciated, have really made a mess of my MacBook this time.

HT4718 am trying to install OS X Lion for the first time. So far it has been downloading for about 2 hours. How long should it take?

Can anyone help please?
Lion download to iMac has been running for about 2 hours and is still not halfway yet. How long should it take? should I cancel and start again?

1500Kbs is 1.5Mbs. That is Kilo bits per second. There are 8 bits to a byte so if you divide 1500 (or 1,500,000) by 8 you get 187500 bytes a second. Divide 3.5GBs (3,500,000,000), that capitol B is for Bytes, by that 187500 you get 18666.666 seconds. Which needs to be divided by 60 to get the minutes and then again by 60 to get the hours.
5.1851xxx hours.
I use to have a 3Mbs DSL connection and it took me over 3 hours to download Lion. Now that I have a 19Mbs Cable connection it take about an hour to download and install.
So wait it will happen eventually. If you cancel and start again your are still going to wait 5+ hours.

Installing Tiger 10.4 for the first time with 4Gb (PLEASE HELP)

Ok hey, I would like to install Tiger on my mac g5 but there is a problem I have about 4 GB of hard drive space left on my drive. Will this cause a problem? or will it actually free up space once I installed it.
I also have some files that I would not like to become altered (music songs in logic etc) when I install this system is there a possibility I could lose work or subject to structure change?

And HFS+ just hates having less than 15% free space, too. The more fragmented, the more likely you could lose the directory itself.
When you restart etc the system flushes any unsaved writes out to disk, and it could just die there.
At less than $0.50/GB for storage, buy some backup drives
And with 4GB of RAM, and swap files (files, they start at 64MB and double) it is unlikely during an install there will be ANY. Always good to restart before even running updates. RAM helps with the install to decompress files, not disk drive - because during an install, you are booted from DVD and it can't write to DVD or to hard drive for swap files. Temp files, yes, and usually it can be 3x larger than the file.
250GB drive should have more like 40GB free unfortunately. And that is based on MicroMat's in-house testing. They use to have a forum on MacFixit, unfortunately that is gone and moved to their own site and they didn't migrate their own thread discussions (wealth of info there I use to link to).

I installed adobe digital editions for the first time. But i cannot activate. always the same fealure: Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ... but i'm shure, the date &time is correct. I tried all suggestions in the forum

Bei meinen Versuchen Adobe Digital Editions zu aktivieren kommt trotz richtiger ID und PW immer: "Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ...
Was kann ich tun?

I have the same problem!! the ID adobe is right and the password as well! fuckk!!!!! please hlp us!!!

HT1918 update software for the first time

After select payment method to none..Apple need "to redeem a code or gift certificate, pls enter here". Where i can find that code. Just click none at payment method nothing happen

Redeem a Code > http://support.apple.com/kb/ht1574

Starting Permier Pro for the first time - how do I create a new project?

Starting this software for the first time.
New Project window is asking to load a preset. There are no presets.
This is not good software - I can't get past the first window!
What do I do, please?
TIA

Welcome to CS3.
Before you post any further questions, please take a look at the video tutorials in Adobe's video workshop. I'm not trying to be rude, just trying to save you from having to ask many basic questions that can be answered by watching the video tutorials.
http://www.adobe.com/designcenter/video_workshop/
It is a great resource and can get you up and running. Just select Premiere Pro CS3 from the products window, then select the topic "Getting Started" and finally the title. Start by selecting "setting up a project" under the titles window.
Its like having your own in-house instructor.
However, as Jeff said, the trial version will not have certain features enabled.
Good luck.

Installing GroupWise 2012 for the first time

Hello,
I am looking for some help on installing GroupWise 2012 for the first time, and onto a brand new Windows 2008 Server. I have looked at some of the documentation for this, but I do not fully understand what I need to do. For example, I need to have eDirectory installed so I installed eDirectory on the Windows sever. I don't know what settings I need to use for eDirectory or if I even need a Netware server, too. I would appreciate it if someone could walk me through this step by step and provide me with values for a basic system I would appreciate it. My first goal is to learn how to install GroupWise 2012 on a Windows 2008 server. Once I understand this, then I can redo it and go from there.
Thank you for your help.
John

Hi John,
Let me see if I can be of some sort of assistance.... you don't need a NetWare server - besides they are obsolete.
I created the following set of instructions for somebody doing a first time install on Linux - perhaps just read around it and see if it works for you in a windows environment:
"on the server run the GroupWise install: ./install from the directory where you have the software
select "Create or Update a GroupWise System"
accept the license agreement
create the software distribution directory (default should be fine)
From the Select Software dialog select the Select All button
when the copying is complet select Creating a new GroupWise System
to start ConsoleOne select Run
when prompted with the Linux Mount Directory select OK
when prompted, take note of the steps yout ake to create a new system, then select OK
login to consoleone with your admin credentials
in the left pane select GroupWise System the select Tools | GroupWise Utilities | New System
select next
confirm that your tree is correct
select Extend eDirectory Schema check box and then select next
When prompted for a system name enter something simple like GWise
When prompted for a primary domain name enter a domain like gwdom1 (I'm keeping it generic in this scenario)
when prompted for a domain directory enter a path ie /opt/novell/groupwise/dbs/gwdom1
select next
Next to the domain context fields select the browse icon
browse to and select the container that will hold the domain (you might want to create an organisational unit called groupwise in your tree for this purpose)
next slect your language and time zone
when prompted for a post office name enter a poa name like gwpoa1 (again, generic in this example)
when prompted for a post office directory enter a path eg /opt/novell/groupwise/dbs/gwpoa1
the context for the post office is assumed to be the same as the domain
select the language and time zone for the post office
in the post office link dialog confirm that tcp/ip is selected
enter your ip address of your server
leave the ports at default - don't mess with these unless you know what you are doing!
in the IP address of the MTA (that would be your domain) enter the IP of your server
leave the ports at default
browse and add existing edirectory users to your GroupWise system
to create the GroupWise system select next
view the installation summary then select next
the final step is to install the agent software - select next
from the GroupWise agents configuration dialog select next
confirm that the check box for Launch GroupWise AGents on system startup is selected then select exit
exit the GroupWise installation program
from the terminal winodws enter rcgrpwise start to load the groupwise agents"
Good luck
Cheers,

Installed Firefox 3.6.8 for the first time and it keeps crashing

I just installed Firefox for the first time and when it is finished installing I tell it to start. It tries and as soon as it does I get a crash report. Every time I click Restrt Firefox it comes up with the same crash error, which is the following:
Add-ons: {C1CA7765-44E4-452e-9D00-A04F3D434281}:1.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.8
BuildID: 20100722155716
CrashTime: 1283492259
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1283492203
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 2
StartupTime: 1283492258
Theme: classic/1.0
Throttleable: 1
URL: http://my.yahoo.com/
Vendor: Mozilla
Version: 3.6.8
This report also contains technical information about the state of the application when it crashed.
I am running this on a Duo Core processor, Intel, Laptop, Windows 7 with 4-gigs of ram. I have never had a problem with other programs crashing like this before.
Any ideas? I have never used Firefox and after 20 years have decided to try something new.
Thanks for any help.

You mean out of this whole community no one knows how to fix this ... I wanted to give Firefox a try, but honestly, I am starting to see why I have not switched from IE, it is stable and I get answers when I post to the Microsoft boards as well as the answer to everything I have ever had an issue with is out there ... what is worse is that I am not the only one with this problem and no one can still help because I am sure us five are not the only ones that have run into this.

I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

Demons1 in the future please only migrate your documents and settings.
Please use the uninstallers to remove your current installation. They are located in the Applications/Utilities/Adobe Installers folder. Once the uninstall is complete you will also want to run the CC Cleaner Tool. You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

Trying to install creative cloud for the first time and getting error code:1

im trying to install creative cloud for the first time but im getting a error code:1
what can I do?

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Installing Thinkvanta​ge software for the first time

Similar Messages

Maybe you are looking for

Installing Thinkvantage software for the first time