Installing third party plugin

I am trying to install Vengeance Mastering Suite – Stereo Bundle .
I have purchase the eLicense key and installed both.
The plugin does not appear on the Logic Pro effects menu.
What am I doing wrong ?  Iv'e have downloaded and installed
several times.  Please help

Hi
You need to run Logic in 32bit mode for the Audio Unit manager to validate the plugins.
Go to Preferences:Audio Units Manager and check to see if there are in the list.
If not:
http://support.apple.com/kb/TS3934
http://support.apple.com/kb/TS3199
HTH
CCT

Similar Messages

  • Can third-party plugins such as Element 3D and Red Giant be used with CC?

    I've searched for this question everywhere. I just want to be sure that I can install third-party plugins with the creative cloud programs. Wanted to clarify this before purchasing.
    Some direction to this inquiry will be appreciated.

    I've searched for this question everywhere. I just want to be sure that I can install third-party plugins with the creative cloud programs. Wanted to clarify this before purchasing.
    Some direction to this inquiry will be appreciated.

  • Third party plugin for premier pro cs6

    I installed a third party plugin for premier pro cs6 on my mac and it's not loading... How can get premiere to see it in the program?

    hi todd,
    cart in front of the horse syndrome - wrote BEFORE reading the article. sorry ;-)
    am coming from 10 years of vegas, unhappily so, but at my age 60+, i'm wary of anything new....

  • RED Workflow questions with Mac Pro (including third party plugins)

    Hello all,
    I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
    Here is what I’m working with:
    2014 Mac Pro
    -2.7 GHz 12-core intel xeon E5
    -64GB Ram
    -Dual AMD FirePro D700 6GB
    -1TB Flash Storage
    Editing all footage off 96TB Raid 6 mini-sas server (getting about 1100mbs read/write rate according to AJA system test) which is faster than any Thunderbolt/TB2 drive array I have.
    Media I work with is footage from the RED Epic (normally 5K) as well as DSLR footage from the 5d.
    Software:
    -PrPro CC 2014 (8.1)
    -Magic Bullet Looks 2.5.2
    My question(s) pertains to RED post-pro workflow in combination with third party plug-ins and the different approaches to make it more efficient.
    Right now, majority of the clients need a 1080p HD master, and they are generally anywhere from 2-8 minutes (usually). So my sequence settings are as follows:
    Video:
    Editing Mode: RED Cinema
    Size: 1920 x 1080
    Audio: 48Hz
    Video Previews
    Preview File Format: I-Frame Only MPEG
    Codec: MPEG I-Frame
    1920x1080
    Maximum Bit Depth unchecked
    Maximum Render Quality unchecked
    Composite in Linear Color checked
    Export Settings
    H.264
    1920x1080
    VBR 1 pass
    Target Bitrate 12mbs
    Max bitrate 12mbs
    Maximum render quality/depth/previews unchecked
    Issues I have:
    -Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
    -Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
    So my questions are:
    Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
    Would using offline editing help at all?
    Do you place your effects on adjustment layers?
    Is there anyway to improve export settings when using an array of filters?
    Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
    Is there any other tweaks that you would suggest for RED workflow with PrPro?
    Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?

    Hi This Is Ironclad,
    thisisironclad wrote:
    Hello all,
    I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
    The biggest issue is that most people have is that updating OS X causes certain folders to be set to Read Only. See this blog post: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
    thisisironclad wrote:
    Hello all,
    I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
    Here is what I’m working with:
    2014 Mac Pro
    -2.7 GHz 12-core intel xeon E5
    -64GB Ram
    -Dual AMD FirePro D700 6GB
    -1TB Flash Storage
    It's a nice base system. How about an additional speedy disk for media cache files. You also did not mention which version of OS X you are running.
    thisisironclad wrote:
    Software:
    -Magic Bullet Looks 2.5.2
    The Red Giant website does not indicate that this software is yet updated to work with Premiere Pro CC 2014.1 (8.1). Proceed with caution here.
    thisisironclad wrote:
    Issues I have:
    -Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
    I would not use this plug-in until you get the OK from the manufacturer.
    thisisironclad wrote:
    -Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
    Again, I suspect your plug-in.
    Keep in mind that exports are largely CPU based but you can make sure that GPU acceleration is enabled for AME at the bottom of the Queue panel.
    thisisironclad wrote:
    So my questions are:
    Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
    It's OK.
    thisisironclad wrote:
    Would using offline editing help at all?
    No need when you should be able to edit natively. Relinking might also be an issue.
    thisisironclad wrote:
    Do you place your effects on adjustment layers?
    That's one way you can do it with the benefit of being more organized.
    thisisironclad wrote:
    Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
    I do. Of course, that's a preference.
    thisisironclad wrote:
    Is there any other tweaks that you would suggest for RED workflow with PrPro?
    Try the following:
    Sign out from Creative Cloud, restart Premiere Pro, then sign in
    Update any GPU drivers
    Trash preferences
    Ensure Adobe preference files are set to read/write(Hopefully you checked this out already)
    Delete media cache
    Remove plug-ins
    If you have AMD GPUs, make sure CUDA is not installed
    Repair permissions
    Disconnect any third party hardware
    If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCLYou have AMD GPUs.
    Disable App Nap
    Reboot
    thisisironclad wrote:
    Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?
    I really shouldn't answer that question.
    Hope this helps.
    Thanks,
    Kevin

  • How to reinstall a corrupt, third-party plugin?

    This is a multi-level issue.
    After purchasing and installing Recosoft PDF2ID (a very useful and clever plugin that allows a user to open PDFs right into InDesign), I noticed that InDesign would hang on Quit. Becasue this hang (and my subsequent force-quite maneuvers) became the norm, I decided to disable PDF2ID, the one third party plugin I had added to ID, using the "Adobe Exchange Manager".
    After I did that, "magically", ID resumed it's normal quit process; in other words, no more hanging but just a simple, happy and definitely terminal Quit.
    I contacted Recosoft and they replied " We have tens of thousands of PDF2ID installations (amongst various users) and this is a first". So, in other words, I should not have an issue myself because other users do not. That's logical, right?
    I then decided to enable PDF2ID once more just so I could obtain some sort of crash log on Quit; something I could send Recosoft for them to examine and possibly find the problem.
    When I did enable the plugin again (Exchange screen below, last item enabled), I got a "Startup Alert" -also attached.
    Only one time, the plugin loaded and, as expected, ID hang on Quit.
    After that I could not get the plugin to load again (but got more "Startup Alerts").
    I emailed Recosoft again and send them the Force-Quit log. they told me that they saw no issues and, furthermore, they added "You should contact the Adobe Exchange store to download it and install it again.".
    I did.
    After spending 2 useless hours with Adobe on the phone, they told me (in an email I asked them to send me) that "The plugin is from Recosoft & not from Adobe, we have helped you [not true at all] with the installation & activation of the plugin but we cannot help you with the usage of the plugin." I never asked them to help me with the usage of the plugin. I asked them to help me reinstall a plugin that I had purchased through Adobe Exchange, a function that apparently Exchange cannot perform.
    So, I purchased a plugin using Adobe Exchange. The plugin somehow went bad and impairs the normal functioning (quit, to be precise) of InDesign. Recosoft won't help because I bought their plugin through Adobe Exchange and Adobe won't help either (but is happy to send me an email with a lie embedded in it) because it is not their plugin ... Who should I call now? Apple because I'm using a Mac? The manufacturer of the chair where I sit while I work?
    Maybe they are the ones who are supposed to help me get a replacement plugin installed. You tell me.
    Thank you.

    Thanks for the condescending advice. I did contact the vendor first. That's obvious, a no-brainer. Their (Recosoft's) reply was: "... contact the Adobe Exchange store to download it and install it again." Later they explained that because the plugin was acquired through Adobe Exchange and because they only sell that PDF2ID Lite version through Adobe Exchange, I had to ask you for assistance.
    In short, although they indeed build and provide the plugin, it is Adobe Exchange the engine that does the work to download, enable and/or disable a plugin. Exchange does nothing, however, to replace a bad plugin; there is no setting or button or whatever to re-download from source, replace a bad file and reinstall. The only options are enable and disable plugins OR purchase a plugin again. The latter is not a solution, really.
    What's interesting to me (other than this thing is still an exercise on pointing fingers) is that when a third party plugin to be used with an Adobe tool is added to your workflow it immediately acquires an Adobe-designed icon, a reflection of Adobe's brand. In general, one does not want to stamp a product with one's own brand unless one is ready to take some sort or responsibility for that product. Adobe appears not follow that logic though. You add one of your branded icons to a product that (it is obvious to me) you take zero responsibility for, one that I can't expect Adobe to support ...

  • Third Party Plugin - Final Cut Express 4 HD

    I'm not able to visualize the plugin in the Effects menu toolbar and I was told that I need to install a FxPlug Support that is provided from Apple for free. Well, two things, I do not know where to find it this FxPlug and why after installing my plugin is not working.
    Thank you ion advance for any help or light on this issue.
    Best,
    jlvsouto

    Thanks for your answer!
    The software does not give me the option where to install it and I'm kind of lost.
    Is the FCE 4 work with third party plugins?! I was told that not! Is it true?!

  • How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

    how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
    Thank you.

    Hi ,
    Your windows is 32 bit or 64 bit .
    If win 7 32 bit
    Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
    If win 7 64
    PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
    Thanks,

  • VE Third Party Plugin Maya 2014

    Hi,
    we have installed the Third Party Plugins for Maya 2014 to use RH File Formats in Maya.
    But this plugins seems to have some bugs
    Always when you activate the rh_maya2014.mll plugin we get the following messages:
    - "New menu sets are available. Your menu set preferences must be updatet to accept them. Custom menu sets will not be affected."
    And then comes the mesage:
    - " the shelf Polygons has items that cannot be read"
    Also there is the message:
    "Error in line1: initialize plugin function failes (rh_maya2014).
    Result is that many of our old preferences doesn't work anymore.
    Can anybody help us. Is there a newer version of the "RH maya 2014 plugin" ?
    Thanks!

    Hi Tobias,
    I have been in touch with Development, it appears that the file QTLibs.dll is not required. Unfortunately it is incorrectly listed in the Installation Script. Thus you can remove it from the folder mentioned above.
    I ran some tests. When I turned off the plugin, Maya behaved somewhat unusual when next restarting e.g. I have to choose save or close scene before I got into the application. After this the application ran ok.
    I subsequently deleted the Qtlibs.dll from the folder above and the plugin and application ran then without issue. Just one other thing, when I installed the plugin I ran it in Administrator mode. These are the only things that were done. It has also been confirmed to me by a colleage that the plugin is running ok on their system. Is there anything else that you think maybe a factor e.g. multiple releases of applications on same client, third party addons, folders/files being shared among other applications?
    Kind regards,
    SAP VE Support

  • CS5 Trial Version: are third party plugins allowed?

    I'm just considering an upgrade from Elements on recommendation that CS5 will provide better colour and page size control on my Canon iPF5000 - there is a Canon plugin that supports CS5 (they claim!).
    So downloaded the trial CS5 version and installed the Canon plugin according to the docs in ./plugins/import-export. No matter what I do I cannot get Photoshop to list the plugin, so I have no idea if it's actually being recognised or not. Unfortunately Canon don't seem to provide any documentation, so I've no idea what to expect.
    I've been told that trial versions don't support plugins - is this correct?
    OS is 10.5.

    The trial does support third party plugins.
    If the plugin is not written for 64 bits, then it will only be available if you switch Photoshop to run in 32 bits addressing mode.

  • Extension Manager not seeing third party plugins

    I have a third party plugin that I would like to disable without uninstalling, but the Extension Manager CC does not even see it for me to click off.  Suggestions?

    I cannot address the 3rd party plug-ins, but if installed properly (differs by company), they should Export fine.
    Now, I find Auto Levels (actually about all Auto Effects) to be useless. Instead, use the regular Levels. If, within one of your Clips, you need to vary it, just use the Razor to cut that Clip into mini-Clips, as it will not Keyframe, unless CS4 has changed this. Levels is an excellent Effect.
    Also, Shadow & Highlight can be very useful too. Its default is Auto, but you can just click that OFF and adjust as is needed.
    Good luck,
    Hunt

  • Third party plugins

    which third party plugins supported in fcp X

    Tom Wolsky wrote:
    Also CGM has FCPX effects and transitions. And CoreMelt have ported their effects to FCPX. And for really amazing effects there are GenArts Sapphire Edge effects. None of these are free, but if you want a great, customizable look that's stunning and unique I don't think you can top GenArts.
    Thanks Tom,
    I bought CoreMelt for my FCE4 but it sometimes make the FCE4 very slow and lethargic.
    I will go & check out the GenArts.
    Thanks

  • How to use third party plugins in PP CC 2014

    This is my first venture to use a third party plugin, in this case it's a transition plugin, and I'm trying to get it to work in my newly updated Premiere Pro CC 2014 on my Windows computer. I unzipped the files for the plugin into the Program Files/Adobe/Common/Plug-ins/7.0/MediaCore folder. When I open PP and go to add one of the new transitions, they don't appear in the Video Transitions drop down menu to select and apply them. I did some googling and saw a workaround involving an adjustment layer, but also saw several posts that said the 2014 version enables drag and drop compatibility. Any input greatly appreciated.

    It's called the Fancy Particles Transition Pack authored by Stefato which I found on Videohive here: Motion Graphics - Fancy Particle Transitions Pack | VideoHive. There were four versions which came zipped and I unzipped them to the MediaCore folder reference in my original post. When I saw the 7.0 in the path I kinda figured something may have changed on the internals between PP 7 and PP8. Still hoping someone will come through with a solution.

  • Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

    I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
    Please provide me a link where i can actually know how it is done.

    + to _eNo_,
    Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • Problems installing third party software on Mountain Lion.

    I received message "Your security preferences allow installation of only apps from the Mac App Store and identified developers."  Where is this security setting so I can change it to be able to install third party software? "
    Thank you in advance.

    Open the Security & Privacy preferences. Click on the General tab. At the bottom you will find your Gatekeeper settings. Click on the lock icon and authenticate so you can change the selection. If software does not have a developer's signature in it then the software will not be installed until you change the selection to "Anywhere."

  • When installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?

    when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?  Is it necessary on a Mac to do so?  I come from the Windows world and am still in the learning curve on the Mac.

    Correct.  I have not installed ANY other software for anti-virus, etc.  I want to install a Synch app for my HTC phone to sych with MS Outlook 2011 installed on my Mac.    HTC will not synch with it otherwise.  That was really the basis for my question....if installing a non Apple app can be done without messing with factory settings on the Mac.  In Windows I remember that I needed to disable Norton and the Firewall in order for installation to occur. 
    Thanks.

Maybe you are looking for