Installing third party software at the same time over network.

Hi I know i can copy the installer onto the local drives and manually click on the installers and type in the password etc.
However this is extremely laborious and very time consuming.
Not being an expert in terminal are there any commands I could use to run the installer, and fill out the administrator password when requested?
Thanks any help appreciated.

Repackage the installed files using PackageMaker or LANRev InstallEase and push out your new package using ARD.

Similar Messages

  • When installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?

    when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?  Is it necessary on a Mac to do so?  I come from the Windows world and am still in the learning curve on the Mac.

    Correct.  I have not installed ANY other software for anti-virus, etc.  I want to install a Synch app for my HTC phone to sych with MS Outlook 2011 installed on my Mac.    HTC will not synch with it otherwise.  That was really the basis for my question....if installing a non Apple app can be done without messing with factory settings on the Mac.  In Windows I remember that I needed to disable Norton and the Firewall in order for installation to occur. 
    Thanks.

  • Problems installing third party software on Mountain Lion.

    I received message "Your security preferences allow installation of only apps from the Mac App Store and identified developers."  Where is this security setting so I can change it to be able to install third party software? "
    Thank you in advance.

    Open the Security & Privacy preferences. Click on the General tab. At the bottom you will find your Gatekeeper settings. Click on the lock icon and authenticate so you can change the selection. If software does not have a developer's signature in it then the software will not be installed until you change the selection to "Anywhere."

  • How to clone 40 mac mini at the same time using network clone (like Ghost)

    how to clone 40 mac mini at the same time using network clone (like Ghost)
    Any Ideas ?
    Thanks

    Rather than a 100% identical clone to 40 Macs, I suspect you want the same basic image to be loaded on to those 40 Macs but will require some individualisation so that for example each has a unique computer name.
    NetRestore and System Imaging Utility can do this but a lot of people including myself prefer to use DeployStudio which has more capabilities. See http://www.deploystudio.com
    DeployStudio can be used to like NetRestore to restore an image to multiple Macs at the same time which is like multiple people downloading at the same time, but it can unlike the standard NetRestore also be configured to use multicast traffic which is more like a TV broadcast whereby multiple people receive the same transmission at the same time. This can be more efficient for imaging larger numbers of computers at the same time. For example 1Gbps shared between 40 computers is only 25.6Mbps each, but if you multicast a single transmission of 100Mbps to 40 computers then all 40 can listen to it at the same time and still be receiving 100Mbps even on the same network connection.

  • Problem installing third party software

    I have encountered an issue whereby on trying to install downloaded upgrades to third party software I am asked to insert a disk entitled with my user name. At first I put this down to dodgy software, but have now had the same issue with installing Adobe Acrobat Reader 9.0. The installation software appears to be something called iNosso.
    Essentially the installation gets as far as stating "This software was successfully installed" but before coming up with the summary window comes up with:
    *Please insert the "username" disc to*
    *continue installation.*
    You have chosen to install software that requires this
    disc.
    (username isn't actually shown what is shows is presumably the local name I have given to the computer).
    No such disc exists and have tried the original installation discs for 10.5 but to no avail. I end up force quitting the installer but am concerned that by doing so I may corrrupt the installation and build up problems for myself going forward.
    Has anyone else encountered this issue and if so is there a fix?
    Thanks in advance.

    Allan, I had hoped not to have to go through the steps you suggest as one of the reasons for doing Migration Assistant was to avoid re-installing all my applications and all the relevant license information. Also note that my old apps are running fine it is just third party installers that appear to be the issue. As a test I ran the Apple installer loading some additional apps that came with the computer with no issues. I would also add that all my applications old and new appear to be running without issue. Indeed even those apps affected by this installation issue (incl Acrobat Reader 9.0) seem to run normally so it does appear to be an annoying glitch in the installation that simply stops the automatic completion of the process.
    My nervousness however is that something more sinister is going on in the background that I am not aware of that may affect the performance of the computer going forward.
    However from both yours and Barry's comments it would appear that this is not a common fault therefore is likely to be peculiar to the way I have set things up so in order to resolve I will have to try either re-installation of everything per Barry or a re-installation of apps as you suggest. Now I just need someone to find me the time!!
    If anyone else has come across this issue before and found an easier resolution I would be eternally grateful. Thank you Allan and Barry for the speed of your responses and your suggestions.

  • Un installing third party software

    I've been unable to find any way of un installing non Mac third party software that I've installed, but now no longer want to be installed. Program is called 'Skype'.

    How to throw it to trash? I can't find the third party software

  • Install and uninstall deployments at the same time?

    Hi all,
    I've a question about the behavior, if there is an install and an uninstall deployment at the same time?
    Background:
    I've a device collection called "Default Client" wich deploys all our default software for installation and all special software for uninstallation. For each special software, there is a device collection with an install deployment for it. Now I can
    add machines to this "special software device collections" to install the software and after removing them from the collection, they uninstall the software.
    In my tests on two clients this worked perfect. But can I assume that this works every time or could this behavior be serendipity because of these two competing deployments?
    Regards,
    Rigger

    I'm assuming the membership of the uninstall collections is dynamic and based on the fact that the client are not members of the "Default Client" collection correct so that when a resource is removed from the "Default Client" collection
    it is automatically added to these other uninstall collections?
    If so, then yes, the uninstall is happening because of this.
    If not, then what you've seen is a coincidence because Applications will not be automatically removed just because the Install deployment is no longer applicable to a system.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • BlackBerry-8800 Cannot Install Third-party softwares

    Hi ... can anyone help me how to be able to change all settings (including password prompts), and install Third Party Applications
    I am unable to make changes to the settings or install Third Party Applications. I have a Blackberry that was previously connected to a company's BES. Actually, I purchased this phone 6 days ago from open market; i dont know about the previous owner.
    Please, Please, Please ...... someone help me
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    What Urumilton gave you was the ONLY procedure to remove an IT policy. A wipe will not remove the IT policy
    Your other recourse is to box up the phone and return to sender.
    Thanks
    Bifocals
    Message Edited by Bifocals on 01-18-2009 01:48 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • I was importing photos from my iphone to iphoto and updating the phone software at the same time, when the update completed the photos were gone from the phone and iphoto said the photos were not imported for unexpected reason.

    if anyone can help me with this i would be so greatful, my son is one month old and my wife is heart broken the first month of his life has disappeared from her phone.

    I would post in the iPhone forum. While iPhoto was importing basically this is an iPhone question
    And in the future you probably never want to update and import at the same time. Basically nothing good can come from that
    LN

  • Working on the same document over network

    Hi Folks,
    sometimes we have some persons they want to work on the same document (word document) over the network (file sharing), how can i solve it so that the server (os x 10.6.4) able to let the persons to work parallel on the same document and nothing in the document will be lost
    best regards
    Halooos

    You need an application that supports multiple accesses. Few do.
    Most applications will lock the file so that other systems on the network can't open it.
    Some will also detect if the file gets changed behind its back (e.g. some other machine on the network updates the file while it's open).
    Few support multiple concurrent edits - it's too easy for multiple users to change the same part and then you have issues over who has priority. The app has to specifically support this so that each running app knows who's doing what, and even then there are usually restricted file formats (can you imagine several users editing the same image in PhotoShop, for example?)

  • Good Tutorial On Installing Third-Party Software For Mac OS X?

    Hey Everyone,
    I have a friend who recently switched over from Windows to a MacBook Pro running Mac OS X 10.4.x.
    Recently he asked me to explain to him how installing software on Mac OS X works. He was always used to the typical Windows setup.exe installation methods that dropped everything you needed in the Start Menu.
    After explaining to him the usage of DMG files, PKG files, Installer.app, and drag-and-drop installs, he felt pretty comfortable with the process.
    However, I'm wondering if anyone out there knows a good beginners tutorial for how software installation on Mac OS X works. I checked the Mac 101 site, didn't see much. Searching Apple's knowledge base didn't give me any helpful "general" documents.
    If anyone has useful links they can point me to so I can direct my friend (and anyone else that might ask me this type of question) to some reading material, that could prove very helpful.
    Thanks!

    I don't think there is such a document because installing software on a Mac is pretty simple and self-explanatory. You've explained as much as there is needed to know.
    Your friend could visit The XLab FAQs where he will find numerous FAQs on using and troubleshooting the Mac.
    There are plenty of books available that can be ordered through Amazon.com.

  • Installing Third Party Software

    I could not install BC Dictionary, on my new Tungsten E2. I am using Vista. I then loaded the prc/pdb files on a SD card (my computer shows the files on the card), but when I look for the files on my E2 card, they don't show. I then loaded the Palm software on my wife's XP computer and went through the Quick Install process. It appeared to work, but I can't find the BC Dictionary program on my E2. BC refers me to Palm.
    I am also having similar problems with Documents to Go and I can't sync with my Yahoo Calendar. All of these programs worked on my old Sony Clie.
    Post relates to: Tungsten E2
    This question was solved.
    View Solution.

    Remember the largest SD card the E2 can use out of the box is one (1) GB. If you want to use a larger card you will have to purchase an application from palmpowerups (not affiliated with Palm).
    Post relates to: Palm TX

  • Installing Thinkvanta​ge software for the first time

    I have a T60P that I'm going to be selling. It originally came with XP and I installed Vista Ultimate on it and had the Thinkvantage software working on it.  But I need to remove most all of the user programs, so I've done a clean install of Vista.  I now want to re-install all of the Thinkvantage software on it.  Without TVSU it's a REAL pain.  I've downloaded all of the 32-bit Thinkvantage Vista drivers and software and have installed it on the computer, but many things won't work.
    Is there an easier way to get all of the approriate Thinkvantage software installed?
    Thanks,
    Bert

    Hi Josh,
    I would like to add few things with above suggestion
    For a new key code :
    Request key codes for new orders via SAP Marketplace (SMP), will  receive a download letter on new purchases providing them with their SMP login credentials.  Using these credentials you can login and click in the  "Keys & Requests" tab > Request a License key .
    If your  existing Key code does not work :
    You need   create a customer message [https://websmp107.sap-ag.de/message] using component XX-SER-LIKEY-BOJ . 
    Hope this helps,
    Regards,
    Shweta

  • Flash Player **AUTOMATICALLY** installing third party software

    I just updated to the latest Flash Player and as part of the installation a McAfee security program was installed automatically. If anyone from Adobe is listening, you should fix this immediately. It’s extremely rude.

    Hi, I think the Google Toolbar is an opt out feature as well. If you want to remove that McAfee:
    Under Start menu, go to all Programs
    Open McAfee Security Scan Plus folder
    Select “Uninstall”
    Then Reboot(restart) your computer.
    Other websites offer different programs as well, from what I've seen. Not always easy to UNcheck the offers, I know.
    I think it would be helpful if it was an opt IN. I've seen that some users don't use any Security at all and that would be something they may want.
    Thanks,
    eidnolb

  • Is it possible to install 6 and 7 at the same time?

    Regardin this thread:
    http://discussions.apple.com/thread.jspa?threadID=1308255
    I'd like to try to install 7 again, but I want to keep 6 going in case 7 still won't work. Is that possible?

    Installing iTunes 7 will uninstall iTunes 6 so you can't have the two version working together.
    However you can get old versions of iTunes from FileHippo, so you could remove iTunes 7 and put back 6.
    http://filehippo.com/download_itunes/
    If you are thinking of doing this make sure you make a copy of iTunes Library.itl and iTunes Music library.xml which are in the iTunes folder - the libraries are not backward compatible. iTunes should be closed when you do this.
    Although a backup copy of the library should be made when you upgrade, it is best to be safe.

Maybe you are looking for