Installing two instances of the portal on the same server

Hello,
Our customer, wants a minimal version, and an enterprise version of the portal to be installed on the same server. We tried it but it doesn't work.
It is possible to install two versions on the same server?
Thanx,
Zsolt

Hope this is not a cluster. If it is not cluster, then you can have but make sure that both are different
SID id. You can have any number of multiple instances and there is no techincal issue in that.
I have, say X41 and X21 instances and both have thier own DB isntances..So both are independent.
Thansk
Prem

Similar Messages

How do I install two instances on the same Server and avoid a conflict?

Hi,
I have one Server and I want to install two instances of SQL Server on it.
1. Will be a default instance.
2. Will be a named instance.
The Server has an IP address of 192.168.0.10 and the default instance will be using port 1433.
I want them to share the same address, but be listening on different ports.
Do I,
1. Go into TCP/IP of the named instance and set the port numbers for all the IP's to a port number, e.g. 1976?
2. Delete the 0 from the dynamic ports sections?
3. Create an open port rule in the Windows Firewall to allow access to the Server?
Thanks

Hi,
Please see following Microsoft link
Configure SQL Server to listen on Specific port
Configure Windows firewall to allow SQL Server access
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Two instances on the same server

I've already created one instance on 11g R2 database, but I was told to create another instance on the same server. Can I use the same listener for both instance? Will it cause any problem?
Thanks!
- Johnny

tanww888 wrote:
Thanks for all your responses. I have not dealt with two instances on the same server before. I'll take your advice to start with the same listener for both instances and see if it is causing any issue. My database server is a Oracle Sparc 5120 with plenty of memory and disk space. The second instance that I'm going to create will be much smaller than the first one.
Single or multiple listeners aren't really a factor for performance. Notice that even in Dan's remarks, none of his reasons for multiple listeners had anything to do with performance.
Question, is it easy to create/configure the second listener to point to the second instance? Just in case there is an issue using the same instance.
The listener doesn't "point to" the database - not in the sense you seem to think. It simply watches the ports it is configured to use (1521 by default) for connection requests from clients. When it gets a request it evaluates whether or not it knows about the service (instance) requested, and if it does it spawns a separate server processes to communicate between the client and the db instance, then is out of the way. The listener creates the connection but does not sustain it. You can stop a listener and all existing connection will continue because the listener has no part in maintaining them.
Multiple listeners would be configured by adding LISTENER sections to the listener.ora file. You might find it instructive to realize that if there is no listener.ora, a 'lsnrctl start' will cause a default named listener to start on the default port of 1521. By default, any db instances on that server will register themselves with the default listener on the default port. After this self-registration, the listener will know about the instance if/when it receives any connection requests for it. Let's switch from the telephone analogy to that of a desk clerk at a hotel. He comes to work and is handed a piece of paper that says "We have Tom, Dick, and Harry registered as guests" This would be analogous to the listener learning of instances via the SID_LIST section of the listener.ora file. Then Fred walks up and says "I'm Fred and I'm in room 238", so the clerk makes a note of that. This would be analogous to the instance registering itself to the listener. Either way, then someone walks up and says "Where would I find Tom (or Fred)". The clerks checks his lists and directs the person to the correct room. He doesn't escort the person around to Tom and act as a go-between for their conversation. And hotel management doesn't want to have to pay a separate clerk for each guest.
You might want to read my articles about TNS in general at edstevensdba.wordpress.com. I think they will help you get a clearer understanding.
Thanks,
- Johnny

How to install PI instance on the same server that has Solution Manager 4?

I am planning to install PI 7 on a windows 2003 server that has Solution manager 4 running on it already.
I am planning to install an additional Oracle instance and put PI on it.
What are the steps involved?
Please advise.
Thanks and regards,
Bhaskar

Barry,
I went throught this link when I firt tried MCOD. may be the mistake I did was that I tired installing two separate instances like Sol Man and XI into the same oracle database. it used to fail at the step of Creating table Spaces.
I tired this when I saw some docs on MCOD (I think from IBM).
May be the approach was wrong.
Let me try this new method of installing two different Oracle instances and put Solution manager on one and XI on the other.
I will update you some time today.
Thanks for the help so far.
Regards,
Bhaskar

How to install several instances of the same application on a computer?

Hej,
I have an application in LV 2009, where I have created an installer. The installer installs to a directory called \Receiver relative to the Program Files directory. If I install this once to a computer, everything is OK.
However, I want to install the same application twice on the same computer. There should be no conflicts between the two applications, since I can configure them to work on different directories and ports. But if I call the installer again, and selects another directory, nothing is installed and I get the message "Installation Summary - No software will be installed or removed". It seems like the installer ignores that I have selected another directory, and just uses the default directory, relative to the Program Files directory.
Anyone knows the trick, how to install several instances on the same computer ?
BR, Jan
Jan Nielsen
Freelance system analyst and LabVIEW programmer

Hi Jan,
This is so because each installer has a GUID that is used to check whether the application needs to be upgraded or not. (It's a Microsoft function).
What you can do is create a new installer with a different GUID (copy the installer in the projects), and check witha text editor whether this GUID has changed.
But any specific reason you need two seperate installs? You can run the application twice with a specific INI token:
allowmultipleinstances=True
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Distinguishing between two instances of the same portlet

Hi Experts,
Is there a way to distinguish between two instance of the same portlet in different browser windows?
I'm looking for something like URL parameter passing, but just for portlets.
The problem is, I want a way to pass a parameter between views in a portlet, but in such a way that if another browser window is opened and navigated to that portlet page, the parameter won't be the same. Perhaps I can explain better with this example:
Page A has a portlet on it which has a textbox and 2 buttons - the first button stores the value in the textbox in the PortletRequest (or PortletURL) and if you click the second button the portlet navigates to a different view which displays the value. If I navigate with a second browser window to Page A, however, and only click the navigate button, that value which was stored by the first instance of the portlet will still be shown. I want them to be independent, I don't want changes in the one's PortletRequest to reflect in the other one's PortletRequest.
Any ideas?
Thanks,
JP

Why not use two instances of the same portlet, i.e. create two channels of the same portlet.
The behave the same, have the same application logic, so all you need is to transfer informations between the two portlets.If you want this within user space use the portlet session, otherwise access the http session context /application context and store the data there.
The behavior would be controlled by the portlet preferences, so channel a (instance 1) would be configured to run as controller and channel b (instance 2) would be configured as receiver.

WS-SDK Scheduling two instances of the same report with different params

I'm using the web services SDK for Business Objects XI 3.1 SP 2 to schedule reports. I've got it so that I can successful schedule a report with prompts, setting the value for the prompt and running the report.
However, I'm now trying to schedule two instances of the same report using a single call to BIPlatform.Schedule. It creates the correct number of new instances, the last of which is completely correct. The first one (and in fact if I do more than two all the rest except the last) lose the parameter value from the prompt and the schedule information and the type. So for example if I schedule two instances, both PDF, both for 8am tomorrow with parameters of 1 and 2, I get:
A Webi instance, scheduled to run immediately with no parameters specified and
A PDF instance, scheduled for 8am tomorrow with parameter 2
Any idea what I'm doing wrong?
Cheers,
Jack
Edited by: Jackson Pope on Feb 3, 2011 1:34 PM

Can you possibly post your code here that sets params and schedules? Also as you schedule 2 instances on a single report in a sinlgle biplatform.schedule call(): as you query for InfoObject what you actually query for a single report isn't it, or do you schedule a report template and reschdule it previous instance?

Wrong error message when two instances with the same PK are created commited

I accedently created two instances with the same pk and I got wrong error.
Took me a while to figure out what's going - I use multiple fields mapped on
the same column a lot but not in this case
kodo.util.FatalUserException: User errors were detected when flushing to the
data store. The getNestedExceptions() method of this exception will return
an array of the specific errors.
NestedThrowables:
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 3", "Small Business Review" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 5", "JOFOC Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 1", "RFC/AP Received" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 4", "JOFOC Submitted for Review"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 6", "FedBizOpps Announcement"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 2", "RFC/AP Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:721)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
NestedThrowablesStackTrace:
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 3", "Small Business Review" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 5", "JOFOC Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 1", "RFC/AP Received" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 4", "JOFOC Submitted for Review"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 6", "FedBizOpps Announcement"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 2", "RFC/AP Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
Process terminated with exit code 0

Thanks for the report. I've recorded the bug here:
http://bugzilla.solarmetric.com/show_bug.cgi?id=705

Can I install to instance of the same LabVIEW version

Hi,
I 'd like to know if I it is possible to install 2 instance of the same version of LabVIEW on the same computer.
because my LV8.5 licence has expired i'd like to install a demo LV8.5 version and I 'd like to know if I can install both onmy computer
Thanks
Olivier

Probably not, because they are both the same thing and just differ in the activation state.
LabVIEW Champion . Do more with less code and in less time .

Is database link only 'valid' for instances in the same server?

Background: We have 5 servers and installed Oracle 7.3 and 8.
Problem: I managed to create database link to other instance in same server; but not to other server. Error message received was :
ORA-02019: connection description for remote database not found
: TNS server name not found
BUT: I managed it with 'copy from ' command in SQL*plus.
Question: Is database link only 'valid' for instances in the same server?
Thanks! ;o)

user10127912 wrote:
Hi,
We are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. If you have such experience, please give us some insight.
The existing instance has all the standard ports:
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Enterprise Manager Console HTTP Port (pterpdb02) = 1158
Enterprise Manager Agent Port (pterpdb02) = 3938
What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?If you want a second database instance, no additional installation is required - as long as you want to run the second instance at the same version as the the first. Just fire up dbca and create the second database. One installation of Oracle (one ORACLE_HOME) is capable of supporting many database instances, though the same may or may not be said of the hardware it is running on.
As already said, one listener is enough. One listener, running from one oracle home, using the default name of LISTENER, running on the defualt port of 1521, is quite capable of -- indeed, WAS DESIGNED TO, supporte multiple database instances of multiple versions running from multiple ORACLE_HOMEs.
One instance of dbcontrol/dbconsole will support only one database. If you do not use Grid Control (extra installation, extra license) you will need to use the emca utility or one of the options in the dbca utility to configure a seperate instance of dbcontrol for each database. Don't worry about the ports, the creation utility will take care of it and report what it does.

Can you run multiple APEX listeners for different instances on the same server

Please confirm that we can run multiple APEX listeners for different instances on the same server? Is it an xml setup configuration or do we need to do more??
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Yes.. Just exactly what I was looking for...
Thanks Jari!!
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Two clients in the same server--Script??

Hi Folks,
1.I have two clients in the same server say 100(used for dev) 120(used only for testing).I had developed a script in 100 which I want to test it in 120.Now how to move this script in 100 to 120.
2.How to use includes in scripts and what is the usage?
Thanks,
K.Kiran.

<b>INCLUDE: </b>Include other texts
With the command INCLUDE, you can include the contents of another text into your text. The text to be included exists separately from yours and is only copied at the time of the output formatting.With the INCLUDE command, you always get the most current version of the required text, since this is only read and inserted during the output formatting.
Syntax:
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p] [NEW-PARAGRAPH np]
The name of the text to be inserted must be specified and can have up to a maximum of 70 characters. If the text name contains blanks, then you must put it in quotes as a literal. It can also be specified via a symbol. All further parameters of the INCLUDE command are optional. If they are missing, SAPscript uses default values for them which are based on the respective call environment.
Examples:
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE E PARAGRAPH A1
The text with the name MYTEXT and the language E is included, regardless of in which language the calling text is created. The paragraph format A1 is valid as the standard paragraph for this call.
Optional specifications:
LANGUAGE If a language is not specified, the language of the calling text or the layout set is set for the text to be included. If a language is specified, the text is always loaded in this language, regardless of the language of the calling text.
PARAGRAPH The text to be included is formatted with the style allocated to it. With this parameter, the standard paragraph of this style can be redefined for the current call. All * paragraphs of the inserted text are then formatted with the paragraph specified here.
NEW-PARAGRAPH The first line of the included text has this format flag, provided it is not a command or comment line. If the optional entry PARAGRAPH (see above) is empty, all * paragraphs of the included text are formatted with the paragraph np specified with
NEW-PARAGRAPH.
OBJECT To specify a text completely, you must make further specifications regarding the text object. There are different rules and restrictions for this which depend on the object type of the calling text: All texts can be included in a layout set. If no object is entered here, TEXT is used (standard texts).With a documentation text (object DOKU), you can only include documentation texts. This object is assumed even if no object is specified in this environment. Only hypertext or documentation text can be included into a hypertext (object DSYS). If the OBJECT specification is missing, DSYS is set as a default value.
Only standard text (object TEXT), documentation text or hypertext can be included in any other type of text. The default object is TEXT if nothing is entered.
ID The text ID, which allows further text types within an object, is a further part of the text key. If the ID is not entered, the default Include ID from table TTXID is used for the calling text. If the specification is not in this table, the text ID of the calling text is used.
The ID together with the object are now the basis of a further consistency check:
All text IDs are allowed for a layout set.
Only documentation texts with the text IDs TX (general texts), UO (authorization objects), and documentation texts which have the same text ID as the calling documentation text may be included in documentation texts.
All DSYS texts may be included in DSYS texts, regardless of their ID. Documentation texts to be inserted may only have IDs TX and UO.
Standard texts with all the allowed text IDs, DSYS texts with all IDs, and documentation texts with Ids TX and UO may be included in the other types of texts.
Regards,
Santosh

How can I stop two instances of the same application?

I have just installed Yosemite about a week ago on my MacBook Pro mid '10 and it's working great except for one little glitch.
Whenever I double-click on a file in my Finder, not only does it open in the assigned dock Application, but a second instance of the same Application pops up on the dock out of nowhere. To be more clear, I have my PDFs set to Preview. I click on a PDF in my Finder and Preview starts jumping. Out of nowhere, another copy of Preview springs up on the dock and starts jumping as well. This opens that same PDF twice on my screen.
I noticed this also happens when I'm installing a .dmg file. Two installers open at the same time when I double-click the icon.
It doesn't happen if I right-click > Open or right-click > Open With.
Any thoughts?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

CNR: Two cnr instances in the same server (lab environment)

Hello, we are trying to install two cnr 7.2 intances on the same server in order to replicate in lab the real environnment (failover local cluster) without deploying two servers.
I've seen on the installation guide that installing both a local and regional server on a single machine is supported, but what about two local servers working as a failover pair?
up to date, we've managed to install both installs, the dhcp servers are configured for using different interfaces and web gui are listening in different ports. scp ports have been changed (1234 and 4321 ) and, on dhcp-server expert configuration: failover-remote-port and failover-port are configured to be different (677 - 678 in one , and 678 - 677 in the other)
We can manage both servers from DHCP - failover configuration, as they show up and running, and even see logs... The other configs are
When trying to syncronize we get the error
"ChangeSet list is empty."
is this configuration supported?
best regards!

user10127912 wrote:
Hi,
We are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. If you have such experience, please give us some insight.
The existing instance has all the standard ports:
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Enterprise Manager Console HTTP Port (pterpdb02) = 1158
Enterprise Manager Agent Port (pterpdb02) = 3938
What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?If you want a second database instance, no additional installation is required - as long as you want to run the second instance at the same version as the the first. Just fire up dbca and create the second database. One installation of Oracle (one ORACLE_HOME) is capable of supporting many database instances, though the same may or may not be said of the hardware it is running on.
As already said, one listener is enough. One listener, running from one oracle home, using the default name of LISTENER, running on the defualt port of 1521, is quite capable of -- indeed, WAS DESIGNED TO, supporte multiple database instances of multiple versions running from multiple ORACLE_HOMEs.
One instance of dbcontrol/dbconsole will support only one database. If you do not use Grid Control (extra installation, extra license) you will need to use the emca utility or one of the options in the dbca utility to configure a seperate instance of dbcontrol for each database. Don't worry about the ports, the creation utility will take care of it and report what it does.

HELP! How to install two versions of the same driver???

Hello,
Here is my scenario... I am a video chat host on different sites. I recently purchased two of the same Creative Live! Ultra webcams. When I try to broadcast on the 2nd site with the 2nd camera the other goes fuzzy and starts freaking out.
Is there a way to install two versions of the driver and run both cameras at once without conflict? Please advise what to do since I would like to use these cams.
Thank you for your help.
Tara

tara2nz wrote:
Hello, Here is my scenario... I am a video chat host on different sites. I recently purchased two of the same Creative Live! Ultra webcams. When I try to broadcast on the 2nd site with the 2nd camera the other goes fuzzy and starts freaking out. Is there a way to install two versions of the driver and run both cameras at once without conflict? Please advise what to do since I would like to use these cams. Thank you for your help. Tara
Hi, i don't know the aswer but i've the same question. I'm about to get 4 webcams, I think live! Ultra is the best model in market but i've to be sure if there's a way to plug 4 webcams together.
Thank's for all.

Installing two instances of the portal on the same server

Similar Messages

Maybe you are looking for