Installing Universal Studio on New Mac Pro

Lucky enoough to be upgrading machines to a couple of pimped out Mac Pros. I used migration assistant to move files and apps, but now I want to install the Universal Version of Final Cut Studio. Should I just install over the existing version or do I need to uninstall first. Anyone have any experience with this.
Matthew
www.dvillusions.com
MacPro Mac OS X (10.4.8)

Just figured this one out myself...

Similar Messages

Installing L8 on a new Mac Pro = more than 2 simultaneous authorizations!?

I'm just a couple of days away from taking delivery of a new Mac Pro and will soon be undertaking the tedious process of updating and installing all of the applications and plug-ins currently taking up residence on the system drive of my Dual 2.7 G5 PowerMac.
My question is this. Since I presently have L8 installed on both the G5 and my MBP, and (as I understand it) Apple only allows for 2 simultaneous installations of Logic Studio/L8, what kind of challenges (if any) am I going to run into installing L8 on the new Mac Pro while it's still installed on the other 2 machines? My intent is to ultimately wipe the G5's HD clean once this has been done and it appears everything is working properly on the Mac Pro, but certainly not before it's been done.
Anyone have a definitive answer on this matter?

It's been several weeks since I installed L8 on both my MBP and PowerMac, but I seem to recall in both cases having to go through some kind of actual "registration" process before completing the install. I'm assuming there's something on Apple's end that associates the registration to a specific machine ID when it's done online. If that's the case, and it has to be done each time L8 is installed, I don't suppose it would be too difficult for Apple to figure out you're running it on more than 2 machines.
In any case, if you're of the opinion that it really doesn't matter, I guess I'll find out when I begin migrating everything over to the new MacPro within the next couple of days. Thanks again for your help.

Hello, I purchased Adobe as a download a few years ago and installed in on a Mac Pro. I would like to uninstall it on that mac and install it on a new Mac Pro. Any idea how I can do that?

Hello, I purchased Adobe as a download a few years ago and installed in on a Mac Pro. I would like to uninstall it on that mac and install it on a new Mac Pro. Any idea how I can do that?

Just download, install, and activate using your serial number. You are allowed to have the software installed and activated on two machines. If you do not wish to retain the original installation as a backup you can deactivate it by opening one of the programs and choosing Help -> Deactivate.
Here is a general link for where you can find download links...
Download and Installation Help -
https://helpx.adobe.com/download-install.html
If you would like a more direct link you will need to name the software and the version.
If you need your serial number you should be able to find it in your Adobe account online if you registered the software when you first installed it.

Cannot install Final Cut Studio on new Mac Pro

When I go to install Final Cut Studio on my new Mac Pro, it tells me that "Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
I have the ATI 5870 and, just a wild guess here, I'm betting it does support Quartz Extreme.
A software update doesn't help me here because I cannot get the software installed the first place to be able to update it. What should I do?

FCS 1...Final Cut Pro 5.0? Won't work on an Intel. PowerPC only. You need at least 5.1...which wasn't a free upgrade, so updating won't work. You need FCP 5.1, FCP 6 or the most recent FCP 7. Those are the only versions that will work on the newer macs.
Shane

Installation of Final Cut Studio on new Mac Pro

Hello all,
I have just purchased a new Mac Pro, and am preparing to install Final Cut Studio upgrade. The wrinkle for me is that I have Final Cut Pro 3.02 installed on an old G4 Power Mac. I have two video projects on the old computer, also backed up on external drives, that I want to be able to edit on the new computer.
I am planning to install my old FCP software on my new Mac Pro, then install the FCS upgrade software. Is there anything I should know or do before doing this to make sure that I will not have any trouble either 1) installing Final Cut Studio upgrade, or 2) accessing my old FCP files.
Many thanks in advance for your wisdom and assistance.

I've successfully installed Final Cut Studio. Thanks, David, for the installation tip.
Now I am holding my breath that I will not have any trouble copying scratch files for my most important projects to my second hard drive, or opening these projects on my new computer.

Is the RAM installed correctly in my 'new' Mac Pro 1,1???

Hey folks, just picked up a used Mac Pro 1,1 2x2Ghz on ebay earlier this week to replace my 2Ghz dual core G5..
Im looking at adding some more RAM to the machine and am wondering if the person I bought this from even has the ram installed correctly.
When I opened it up, the 2x2GB sticks were both in the first two slots in the bottom memory tray. Luckily I had some RAM I planned on putting in it right when I got it out of the box (and then found out my 4GB of DDR2 SDRAM doesnt work with it hehehe), which required me to go look it up online before I even plugged the thing in, so I moved the tray with the RAM in it to the upper slot like the article I read said it was supposed to be..
Now I just read the Apple support doc that pops up when you click the Upgrade Memory link in the Memory tab in System Profiler and am confused even more..
Am I supposed to have both of those FB-DIMMs on the upper tray or do I need to move one of them to first slot of the lower tray??
Also, I noticed in the installation pictures, the top tray is pictured as being installed upside down, so the RAM in both trays is right above/below one another, but both of mine are right side up..
My Mac looks like everythings fine, system profiler shows me both DIMMs in tray A and isnt complaining... Gave Logic Pro a nice run the other night and havent really run into any problems or a KP yet.. Been reinstalling my recording software like crazy and no problems yet either..
Just wanted to make sure how its really supposed to be installed in case I could possibly end up frying something down the line..

See even the first two links posted have conflicting information.. According to OWC, I should have one 2GB stick on each riser, but that second link with the memory configuration pictures, the last config for the 4GB shows both 2GB sticks on riser A (thats actually the doc I was referring to earlier that I looked at when I first got the Mac) so I figured I was ok.. None of those options show one stick on each riser..
And again in regards to the way the riser is installed.. Apples own memory upgrade doc does indeed show the top riser installed upside down so the heat sinks are facing each other.. But every actual picture Ive seen, and OWC's own installation video shows them both installed right side up.. Now that I think about it after watching the OWC video, the riser cards are keyed, so I dont see how it would fit upside down in the first place..
I dont know I guess Ill just leave it like it is. I should be getting a pair of 2GB DIMMs hopefully in another week or so when money permits so Ill have both risers in use anyways..
Maybe mine is a later 2007 version of the 1,1 or something and there was a revision done??? Wish you could tell the actual date by serial number instead of just the timeframe the model was in existence hehehe.

Anyone having problems installing Boot Camp with New Mac Pro 2.8?

I just get blank screen after it restarts with XP disk. I'm using a vga - dvi adapter with a apple 17" display..
I've phoned apple and read up on here but nobody seems to know. I just wondered whether my 2008 Mac Pro was faulty...
Please can you help?
cheers

Are you getting a white screen after the Mac reboots? If so, try disconnecting all non-essential USB/FW devices.
I had the exact same problem and I went through a long, stressful process of elimination to get it working, even to the extent of using my MacBook as an external drive through target disk mode!
It turned out to be my iMage USB camera. Even after successfully installing Windows I have to disconnect it before using Bootcamp.
I Hope this helps.

Installing OSX Server on new Mac Pro Nehalem

Mac Pro received at the weekend. I have encountered a problem that I will need your assistance to resolve with installing OSX Server 10.5
1. We have OSX Leopard Server on DVD - version 10.5 which won't install onto the Mac Pro.
2. I have checked online and this is a known issue see here : http://support.apple.com/kb/HT3479
3. I have followed these steps and I now have OSX Server 10.5.7 installed
4. Problem is that without a bootable OSX Server DVD I cannot reinstall my timemachine backups via the utility on the DVD.
Please let me know how I can proceed as I cannot complete the migration without a bootable DVD.

Can Server be cloned the same as client version?
Can you clone client and upgrade the second OS to Server as your real bootable backup?
Why not restore from TimeMachine first, then upgrade to server? (Not a fan of TimeMachine though and prefer other methods).

Installing Airport Extreme Card in new Mac Pro 2008?

Hello, I bought the upgrade kit for the airport wireless n up at the apple store and I am trying to install it in my new Mac Pro 2.8 octo.
I found where to install it and I did install it but Im not getting any connect at all, though it says airport is on. I installed the software on from the CD it came with also. I am using a D-Link Xtreme Router model 655.
I read on another forum post that you might have to install a wire for the antenna on top of the card. I didn't see any wire when I installed so maybe that applied to the older mac pros..
any help would be appreciated.
These cards are compatible with my router right? I know my macbook pro n wireless connects fine.
Thanks!

hi kevin.
I also bought air mac card at apple store of japan.
And I installed that card at my new macpro by myself.
Apple store's genius people said to me, its installment takes 30min,so
I tried intalled airmac card and working normally in now.
But this is not customer install part.I think. They did not gave any install
manual for this part.
So I installed this part at mac but it was not working at that time.
After googling,I found some miss at my work. That is not connecting cables at network card.
You have to connect cable at your network card for using.
Also you can find your conneting cable at your new mac.
Please find connecting cable and connect to your network card.

Bootcamp and Windows 7 and 8 on the new Mac Pro (Dec 2013)

I want to install bootcamp on my new Mac Pro (Dec 2013).
Bootcamp says it supports Windows 7 and 8, but there is a bunch of new hardware with the new Mac Pro, so I am concerned about bootcamp support for it.
Are there any issues with Windows 7 Pro install? How about Windows 8 Pro?

From what I see, only Windows 8 is supported on the new Mac Pro (Late 2013) with Bootcamp.
See Boot Camp: System requirements for Microsoft Windows operating systems
Look under Boot Camp requirements by Mac model
Mac Pro
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
Mac Pro (Late 2013)
BCA
"BCA" indicates that Boot Camp drivers are automatically downloaded as part of the Boot Camp Assistant in OS X, for 2013 or later models of Mac computers.

Premiere CC and Media Encoder crashing new Mac Pro

Since installing CC on my new Mac Pro (Late 2013) Premiere and Adobe Media Encoder have been continually crashing my system.
At first, my comp would freeze and I'd have to hard restart, then it switched to rebooting on in's own. This would happen 10-20 times a day while editing.
This began shortly after I synced settings from a previous version of PP but since I've installed new RAM; reinstalled CC/PP; reformatted my HDD and reinstalled Mavericks, CC, PP; and have not synced my settings. I've also tried editing multiple projects of different sizes with different media types -- all are experiencing the same problems.
When I edit the same projects on my MBP, everything works fine.
Recently, I have disabled GPU acceleration in all of my PP projects and that seems to have solved the problem.
My office received 3 Pros at the same time with the same hardware configurations and software -- I am the only one experiencing this problem.
Here are some specs:
Late 2013 Mac Pro
2.7 Ghz 12-Core Intel Xeon E5
64 GB 1867 MHz DDR3 ECC
AMD FirePro D700 6144 MB
All drivers, CC, and software is up to date.
So what do I do now?
Any help is much appreciated!

I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
Mac and Root User http://forums.adobe.com/thread/879931
-and http://forums.adobe.com/thread/940869?tstart=0
Mac & nVidia Driver http://forums.adobe.com/thread/1075592
-and http://www.nvidia.com/object/mac-driver-archive.html
Mac Retina Bug http://forums.adobe.com/thread/1159632
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0
OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html

Can SpeedGrade use GPU Acceleration in New Mac Pro?

Good afternoon, I would like to know if Adobe SpeedGrade is able to take advantage of GPU acceleration AMD FirePro D500 installed in the brand new Mac Pro. Thanks in advance for your reply.
Message was edited by: Kevin Monahan
Reason: More searchable title

Supported GPU technologies (Mac):
- AMD/nVidia OpenCL for direct link in MacOS 10.8.5 and higher
- OpenGL for SG native
Supported GPU technologies (Win):
- AMD OpenCL, nVidia Cuda for direct link in Win7,Win8, Win8.1
- OpenGL for SG native
Note: Although SG not utilises two GPU's, it should run fine on your new Mac Pro and use OpenCL for acceleration

Old hardrive in new Mac pro

I bought a second internal hardrive for my old 1.6 G5. I bought it from an apple reseller so assume it is the standard type. Can I install this in my new Mac pro 2.88 (when it arrives)?
Also, I want to use this hardrive with logic and some third party plugins. What is the best way to configure this. Applications on main hardrive, all audio files and samples, sample libraries (including those for logic) on the second Hardrive? Any advice on utilising my hardrives for music produciton would be great
Cheers

You have four drive bays. Spread everything out. Your old hard drive is likely a couple years old. I would reformat it (which you need to do anyway to GUID partition table format for INTEL Macs) and use it for an emergency backup clone of your system and put it someplace safe. Off line, maybe in FireWire/SATA case.
I'd look into 3 x 500GB drives from WD. 750GB if you want even better performance.
Don't use Migration Assistant for any PPC applications, just for preferences, settings and data.
Music and audio benefit nicely from 4 drives.

Re installing Final Cut Studio on my NEW Mac pro?

I originally purchased Final Cut Studio (on a G5 Power PC), Then installed the universal crossgrade,
then installed Final Cut Studio 2. Now I have a New Mac Pro (Intel Chips) How do I go about
reinstalling FCS? do I need the original serial key from the first version or do I just use my
FCS 2 serial Key?
J>H<L

J>H<L
You'll need both keys, but you only have to do one installation.
The FCS2 installer will ask for the FCS2 key. If that passes, another window will open asking for the FCS key. If that key passes, then it's just a normal installation.

Can Final Cut Studio be installed on a new Mac Pro?

My G5 PPC died. The processor went bad. It would have cost me around 2 grand to fix. So I just bought a brand new Mac Pro thinking that would be the better investment. Tried to install Final Cut Studio and it is not supported. Is this true? If so - this Mac is going back to apple for a refund and I'll pay the 2 grand to fix the old one. I can't afford to loose years of past projects. Not to mention I am in the middle of project and have no way of working on it. Any fix for this? My trust in Apple low and my years loyalty may have to move to another system. I thought it was just drama when a college said the end has come for FCP.

FCP 5, 4.5, 3...no, they will not work on Intel Macs. FCP 5.1 was the first version to work on those machines. So if you have FCP 5 or earlier, no, it will not install. Sorry. And since FCP as you know it has been discontinued, you can't really upgrade to a later version that will open your projects. FCX is the new version, and it is very different than FCP was, and cannot open older project files.
Sorry man...when you hold on to old old software, and get new machines, it won't always work. This is true for any software, on any machine. FCP 5 is over 6 years old...7!

Installing Universal Studio on New Mac Pro

Similar Messages

Maybe you are looking for