Installing update fcp 7 after installing fcp x

FCS 3 is put into a folder when FCP X is installing. When I try to update FCS 3 with Pro Applications Update 2010-02 to obtain FCP 7.0.3 the installer says succesfull, but I still have FCP 7.0.0 (and Motion 4.0.0 etc.)
Is there a way to point the installer to the applications in the Final Cut Studio folder?

Thank you Shane for your answer.
Should I remove FCP X completely, move the FCS 3 apps to the root, perform the the update, then reinstall FCP X? (Apple keeps track of my purchases, isn't it?)

Similar Messages

  • While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

    While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

    The installer should have gone into your Apple Software Update folder:
    C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
    Right mouse click the msi file and select INSTALL

  • Cannot get windows update to run after hard drive install and recovery

    I cannot get windows update to run after a new shdd 1 tb was installed.
    I have a pavilion dv7 4083cl. My recovery set did not work so I used the OEM set.
    Any help would be appreciated

    Hello kjdsynz,
    Have you taken a look at the HD & SSD manual?  Did the recovery fail?  If you take a look at this page for help with that.
    Please let me know if this has helped.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. Iran

    After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. I put this onthe quick time thread and they sent me here.

    and NEVER do a software update unless you've got a clone of your startup drive so you can restore your system to it's working state if something goes wrong.
    https://discussions.apple.com/docs/DOC-2494

  • I am unable to install updates of 768mb after a recent reinstall on my iBook G4

    I am unable to install updates of 768mb after a recent OS reinstall on my iBookG4 with Leopard installed over the original Tiger. The process locks up at "configuring installation". What can I do please?

    Again, does the iBook work okay with the version of Leopard that is installed now? Which version of Leopard is that?
    I take it that you are trying to move up to Mac OS X 10.5.8?
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    Note: That download size is 759 MB.

  • Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed

    Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
    Any idea how to resolve this?
    Thank you.

    Hi，
    Please make sure that your antivirus application does not scan the files in the
    %windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
    You can also temporarily turn off the antivirus application and check the result.
    Or run the following commands, and press Enter after each command:
    Net stop wuauserv
    cd %systemroot%
    Ren SoftwareDistribution SoftwareDistribution.old
    Net start wuauserv
    Try to install updates again.
    Yolanda Zhu
    TechNet Community Support
    I tried the commands as well, still prompting the same error.
    Thanks

  • I cannot update FCP 7 to 7.03 on a installation with Yosemite

    I set up a new installation with Yosemite and installed Final Cut Studio from my original disks. FCP 7.00 work properly, but it will not update to 7.03. Now I cannot open my projects, that I was working on with FCP 7.03,

    Oh...yeah. It can't update when FCX is in the Apps folder.  Since I don't use FCX, I don't know the actual solution, but I know that FCX needs to not be in the Apps folder, or needs to be hidden in some sub folder, in order for the update to work.  I think I read that you need to install and then update FCP 7 before you even install FCX. 

  • Updating fcp

    i'm assuming this shouldn't be a big deal but planning on doing a bunch of updates to my mac pro including updating fcp 6.05 > 6.06 and quicktime from 7.6 > 7.6.6. while i was at it, i thought i'd update leopard 10.5.6 > 10.5.8 and there's also the prokit 5.1 update. is it worth doing these and are there any issues with doing this. for example i've heard some folks have had issues losing their pro level w/ quicktime. is there any particular order that i should perform them and any tips. i have back upped my hd and i'll repair permissions. thanks.

    Download the combo updater to 10.5.8.
    Repair permissions. Install it, repair permissions.
    Then run the software updater for the pro apps.
    Don't do this in the middle of a project.
    Also, if everything is working, why change it?

  • Updated FCP X versions are not showing up

    Updated FCP X versions are not showing up in my App Store upgrades. Apple has been less than helpful other than to verify that I'm looking in the right iTunes account. Can anyone tell me why I can't see the updated versions? I can see my updates for both compressor and motion.

    You probably have the app purchase "hidden" in the App Store.  See this tech note for further details:
    http://support.apple.com/kb/HT5149
    When you reinstall FCPX it should show as already purchased and allow you to just download it again.  No charge as far as I know.

  • Update FCP from 5.0.4 to 5.1

    What is the process for updating FCP from 5.0.4 to 5.1?
    Thanks.

    Welcome to the forums.
    Search is your friend:
    http://discussions.apple.com/thread.jspa?threadID=683812&tstart=0
    Next time use the SEARCH function in the upper right hand corner and see if you can find the answer to your question, because more often than not, it has been brought up. In fact, just a few posts below this was the link I just provided.
    Shane

  • How do i update fcp x

    I give up.  How do you update fcp x?  I'm at version 10.0.0.  Thanks

    how did you obtain it? I would think that if you got it from traditional sources the answer would be obvious...so indulge us and share where/how you got it...because I can only think of two ways to update FCPx...

  • I updated the iTunes, after that when I conect to PC it say insert the SIM. I have SIM in.

    Dear
    Fisrtly, I would like to explain about my problem. I updated the iTunes after that, when I connect with USB. It is saying, there is no SIM card installed the iPhone you are attempting to active.
    And next message says, please disconnect and insert a SIM card in the iPhone, but I tried by different SIM cards.
    The slit is ok as well; I think something wrong with this iTunes I updated, because this is not my first time.
    I would like you give me some information about it, what should I do?
    Best Regards
    J.M.E.R

    Authorized reseller or not, it's a gray market phone that must have been bought in the US and shipped to Saudi Arabia. Are you sure it was an authorized iPhone reseller, or was it a general Apple reseller who is not authorized to sell iPhones? Whatever it was, they are violating their agreement with Apple, and, as the phone has FaceTime on it, they are violating KSA law.
    However, the good news is that it will work if you remove the Verizon SIM and insert a local SIM - unless they phone is actually a used phone that is locked to some other former owner. But that will be obvious as soon as you try to activate it. You can check its history at: Apple - Support - Check Your Service and Support Coverage

  • Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.

    Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.
    Is there any way to use a 10.5.7 wireless .kext files on Snow Leopard? And where can I find the files?

    Ok, I have the fix!! After several frustrating days it finally just works.
    The process:
    Upgrade your Macs to 10.6 (Snow Leopard)
    Powercycle your modem AND time capsule / airport TWICE
    Reset your time capsule with a pin or paperclip on the back
    Follow the prompts to setup your time capsule / airport access
    -- On your Macs
    Go to System Preferences > Network > Airport > Advanced > TCP/IP
    Click "Renew DHCP Lease" then click "Ok"
    Click Apply
    Turn off Airport
    Turn Airport on
    IT WORKS!!!
    One of the magical people at tech support walked me through it earlier today. The whole process took about 1.5 hrs because Show Leopard takes about an hour to install on one machine.
    Hope this helps-
    Joshua

  • Is there a update for adobe after effects compatible with the mac os x 10.9.5 ?

    is there a update for adobe after effects compatible with the mac os x 10.9.5 ?

    If you are using After Effects CS6 (11) or After Effects CC (12), then install the updates:
    http://adobe.ly/AE_CC_1201_Mavericks

  • Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

    Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

    The App Store version sometimes gives problems. As you can't install 10.8.4 from the App Store, download and install the Combo edition > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US This edition will work and will update OS X to the most recent version, in that case, 10.8.4

  • Could not access Creative Cloud today without updating it. After update it will not open. It spins for five seconds then closes. Mac Pro tower 3 yrs old 12 gb ram os 10.7.2

    Could not access Creative Cloud today without updating it. After update it will not open. It spins for five seconds then closes. Mac Pro tower 3 yrs old 12 gb ram os 10.7.2

    I was unable to access the laptop last night to create a new user; however my client would perfer not to try a second account since that would make it unusable for him while we test the second profile.
    Also John Sophos was installed after this started to verify that it was not a virus/malware (I know pointless step but it has happened to me before) so I don't think that is the problem

Maybe you are looking for