Installing Update Rollup 7 for Exchange Server 2010 SP3

Hi,
I have 4 Exchange servers. Two CAS and two DAG. I am currently on Rollup 2 for Exchange Server 3010 SP 3. Can I install Update Rollup 7 for Exchange Server 2010 SP3 or do I need to install a previous one first?
Thannks!
Wave~Chaser

Hi,
When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
and please find below event log:
Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
on turning on logging support.
Can you please help me with this error.
Thanks

Similar Messages

  • Error Install Update Rollup 3 Exchange Server 2010 SP2

    Hy Guys,
    I have the follow troubble when i try install the Update Rollup 3 Exchange 2010 SP2 on CAS Server. The error is "The user who's currently logged on doesn't have sufficient permissions to install this package. You need at least Exchange Server Administrator
    permissions on the current computer to complete the task."
    I've checked the permissions of the user which run the installer and those permissiones are OK. The user belong to Domain Admin, Enterprise Admin, Exchange Organization Management groups.
    I don't know what else to do. Thanks for your great help.

    Hi Wilmar
    Do you have PowerShell execution policy via Group Policy that could be blocking the install? If you right click the file and select "Run as Administrator"?
    Can you try running the setup from an elevated command prompt?
    Or you can enable logging by executing the patch like this below:
    Rollup3.msp /lxv* c:\Rollup3.log
    You can also look here:
    http://technet.microsoft.com/en-us/library/ff772434(EXCHG.80).aspx
    http://exchangeshare.wordpress.com/2009/05/30/exchange-update-rollup-installation-it-is-not-nightmare/

  • Exchange 2010 Mailbox automapping issues after updated to Rollup 5 for Exchange Server 2010 SP3

    Hi,
    i have problem with Outlook Uses who have Full Access on other mailbox.
    An authentication window pop up very time a user start Outlook.
    If i remove the access everything is ok.
    if i insert manual the mailbox everything is ok
    The System was for 3 days ago updated to Rollup 5 for Exchange Server 2010 SP3
    Before the update, was no issue.
    i will appreciated any help
    Thanks

    Same issue here. Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
    Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
    What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
    Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
    the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
    I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
    This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

  • Microsoft Exchange Server 2010 SP3 update to Update Rollup 8-v2 for Exchange Server 2010 SP3

    i have Microsoft Exchange Server 2010 SP3 and i would like to update to Update Rollup 8-v2 for Exchange Server 2010 SP3. 
    what is the best way to do so?
    my current env:
    Name                : xxxxxxxx
    Edition             : Standard
    AdminDisplayVersion : Version 14.3 (Build 123.4)
    ServerRole          : Mailbox, HubTransport
    Site                : domain/Configuration/Sites/xxx
    Name                : yyyyyyyy
    Edition             : Standard
    AdminDisplayVersion : Version 14.3 (Build 123.4)
    ServerRole          : Mailbox, ClientAccess, HubTransport
    Site                : domain/Configuration/Sites/yyy
    Name                : cccccccc
    Edition             : Standard
    AdminDisplayVersion : Version 14.3 (Build 123.4)
    ServerRole          : Mailbox, ClientAccess, HubTransport
    Site                : domain/Configuration/Sites/ccc
    Name                : dddddddd
    Edition             : Standard
    AdminDisplayVersion : Version 14.3 (Build 123.4)
    ServerRole          : ClientAccess
    Site                : domain/Configuration/Sites/ddd
    Name                : iiiiiiii
    Edition             : Standard
    AdminDisplayVersion : Version 14.3 (Build 123.4)
    ServerRole          : Mailbox, ClientAccess, HubTransport
    Site                : domain/Configuration/Sites/iii
    thanks
    Mayson

    Consider referring to the articles below and that explains it all.
    Install the Latest Update Rollup for Exchange 2010 - https://technet.microsoft.com/en-us/library/ff637981.aspx
    Applying Service Pack and Rollup Updates on Exchange Server 2010 (Part 1) - http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/applying-service-pack-and-rollup-updates-exchange-server-2010-part1.html
    Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
    question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

  • Problems installing Mailbox role on Exchange Server 2010 SP3

    I am in the process of installing Exchange Server 2010 SP3 on a Windows Server 2012 server in order to migrate our existing Exchange 2003 server. Everything went well with the installation process until I went to add the Mailbox server role, which is giving
    me the following error (from the log file):
    [05/03/2013 21:58:09.0090] [1] Executing: 
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
    [05/03/2013 21:58:09.0105] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'TAM-FS2.tacomaartmuseum.org', Preferred Global Catalog: 'TAM-FS2.tacomaartmuseum.org', Preferred Domain
    Controllers: '{ TAM-FS2.tacomaartmuseum.org }'
    [05/03/2013 21:58:09.0105] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
    [05/03/2013 21:58:09.0276] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" 
    [05/03/2013 21:58:09.0344] [2] Process standard output: 
    [05/03/2013 21:58:09.0344] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
    [05/03/2013 21:58:09.0347] [2] [ERROR] Unexpected Error
    [05/03/2013 21:58:09.0347] [2] [ERROR] Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0350] [2] Ending processing Start-SetupProcess
    [05/03/2013 21:58:09.0350] [1] The following 1 error(s) occurred during task execution:
    [05/03/2013 21:58:09.0350] [1] 0.  ErrorRecord: Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0350] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0351] [1] [ERROR] The following error was generated when "$error.Clear(); 
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
            " was run: "Process execution failed with exit code 87.".
    [05/03/2013 21:58:09.0351] [1] [ERROR] Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0351] [1] [ERROR-REFERENCE] Id=MailboxComponent___13A8A6B7DE0A4fe3BEB5CB1D86105DA3 Component=EXCHANGE14:\Current\Release\PIM Storage\Content Indexing
    [05/03/2013 21:58:09.0351] [1] Setup is stopping now because of one or more critical errors.
    [05/03/2013 21:58:09.0351] [1] Finished executing component tasks.
    [05/03/2013 21:58:09.0393] [1] Ending processing Install-MailboxRole
    I've searched all over but can't seem to find any reference to "exit code 87" - does anyone have any ideas?
    Thanks,
    Matt

    Error 87 -with these details below - and a fix. The situation that got me here by the way was an incomplete install that was uninstalled, then installed again.
    [02/24/2014 06:49:06.0967] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'xxxxxxxxxxxxxxx', Preferred Global Catalog: 'xxxxxxxxxxxxxxxxxxxxxxxx', Preferred Domain Controllers:
    '{ xxxxxxxxxxxxxxxxxxxxxxx }'
    [02/24/2014 06:49:06.0967] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
    [02/24/2014 06:49:06.0967] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
    [02/24/2014 06:49:07.0592] [2] Process standard output:
    [02/24/2014 06:49:07.0592] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
    [02/24/2014 06:49:07.0592] [2] [ERROR] Unexpected Error
    [02/24/2014 06:49:07.0592] [2] [ERROR] Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0592] [2] Ending processing Start-SetupProcess
    [02/24/2014 06:49:07.0592] [1] The following 1 error(s) occurred during task execution:
    [02/24/2014 06:49:07.0592] [1] 0.  ErrorRecord: Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0592] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0608] [1] [ERROR] The following error was generated when "$error.Clear();
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
            " was run: "Process execution failed with exit code 87.".
    [02/24/2014 06:49:07.0608] [1] [ERROR] Process execution failed with exit code 87.
    I found I could fix this by removing the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Microsoft-Exchange-Troubleshooters/Operational
    and everything underneath it.
    My guess is that wevtutil didn't like adding an event log where it already existed but was slightly different in setup (no idea how, exactly).
    After 24 hours I'll try post again - giving things time to make sure they are actually working.

  • DPM 2012 R2 Rollup 4, Update Rollup 7 for Exchange Server 2010 SP3 backups with eseutil check fail

    Hi,
    It could be a coincidence, but ever since installing Update rollup 4 onto DPM 2012 R2, (which was at UR3 I believe) I haven't been able to complete an Exchange express full backup or consistency check with verification using Eseutil checked. If I have the
    eseutil check enabled I get the following error:
    Type: Consistency check
    Status: Failed
    Description: Data consistency verification check failed for LOGS of Exchange Mailbox Database Mailbox Database 2011112513 on SERVER.xxx. (ID 30146 Details: The process cannot access the file because it is being used by another process (0x80070020))
    Disabling the eseutil verification allows it to succeed, but I'm not happy to continue with that for too long.
    I've had this running for many years and this is the first real issue with exchange, its a single stand alone exchange database.
    Any ideas?
    Thanks,
    Andreas

    Andreas,
    the error is stating that something else has a handle to a file or files during the ESEUtil check.  Typically this is AV.  I have also seen where the Exchange limits are exceeded and that causes the issue. 
    Please ensure you have the DPM AV exclusions for the DPM server and I would advise the DPMRA.exe on the PS.  You can also trying disabling or removing AV as a test.
    DPM AV exclusions -
    http://technet.microsoft.com/en-us/library/hh757911.aspx
    You may also want to test using eseutil against the logs outside DPM and see if that fails with similar issue.  Let us know.  Thanks
    Regards, A.Nadar, This posting is provided "AS IS" with no warranties, and confers no rights.

  • No mail after roll up 4 for Exchange Server 2010 SP3 KB2905616

    Hi
    Exchange 2010 on SBS 2011.
    After auto application of roll up 4 thee are no emails. Although all exchange services are running. Restarting server did no help. Running mail trouble shooter comes up with 'Server Does Not Support Secure Connections'. OWA is also not working with below
    error;
    Couldn't find a base theme (folder name=base)
    Request
    Url: https://remote.theicebox.com:443/owa/auth/error.aspx?url=https://remote.theicebox.com/OWA/&reason=0
    OWA version: 14.3.174.1
    Exception
    Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaThemeManagerInitializationException
    Exception message: Couldn't find a base theme (folder name=base)
    Call stack
    Microsoft.Exchange.Clients.Owa.Core.ThemeManager.LoadThemeFiles()
    Microsoft.Exchange.Clients.Owa.Core.OwaApplicationBase.ExecuteApplicationStart(Object sender, EventArgs e)
    How can I solve this please?
    Regards

    Hi,
    Thanks for your response.
    It's great to hear the good news.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Uninstall Rollup 4 for Exchange Server 2010

    When one of our CAS servers got patched they installed Rollup 4 for Exchange Server 2010 SP3.
    Is it ok to unintall the Rollup 4 update?  I am not able to update other servers for another month and I need all servers to have the same build.

    Hi dirkbucket,
    Yes you can go ahead and uninstall the rollup from the exchange server that got installed. This will not result any impact. Once uninstalled please perform complete reboot.
    As uninstallation of patches is applicable till Exchange 2010 version on getting them reverted.
    "To remove Update Rollup 3 for Exchange Server 2010 RTM, use Add or Remove Programs in
    Control Panel. Then, remove update 981401."
    Find the url for ref: http://support.microsoft.com/kb/981401/en-us
    In Exchange 2013 you will not able to perform reverting of CU other than rebuilding it :(
    Exchange Queries

  • Exchange Server 2010 SP3 test environment - email flow to/from internet

    Today I set up test environment for Exchange Server 2010 SP3 - domain controller running Windows Server 2008 R2 SP1, Exchange Server 2010 SP3 on Windows Server 2008 R2 SP1 and client computer running Windows 7 Pro SP1 x64 with Outlook Pro 2010 x64. These
    machines are VMs on vSphere 5.0 cluster made of 4 esxi 5.0 hosts.
    I have three years of experience in working with Exchange Server 2010 in my production environment but until recently I have not had enough resources to build a test environment. Does "testing" Exchange Server 2010 infrastructure have
    a real life purpose considering the fact that only internal email flow is possible since authoritative SMTP accepted domain is not hosted anywhere thus not visible to outside world. This limited email flow combined with absence of possibility to test
    ActiveSync, Outlook Anywhere, OWA from WAN, . . . really hurt and make Exchange Server rare technology that can not be tested completely before introducing something new into the production. Services that are not possible to test from the outside world are
    useless and whole point of Exchange-like technologies is availability from anywhere and from whatever device.

    I set up Internet Send Connector (by default this type of send connector uses DNS MX records to route email automatically). Having sent an email to my gmail account I did not receive it and in transport logs I saw that mx record was found successfully
    but there is the following line:
    2014-08-05T20:39:51.942Z,Internet Connector,08D17F000FE36010,1,,2a00:1450:4013:c01::1b:25,*,,"Failed to connect. Error Code: 10051, Error Message: A socket operation was attempted to an unreachable network 2a00:1450:4013:c01::1b:25"
    I tried also to send an email to my production email address (we have Symantec Messaging Gateway which is used as a smart host (antispam,antimalware,content filter appliance)) but then error is:
    2014-08-05T20:50:08.395Z,Internet Connector,08D17F000FE36019,1,,91.238.7.10:25,*,,"Failed to connect. Error Code: 10061, Error Message: No connection could be made because the target machine actively refused it 91.238.7.10:25"
    Telnet from test exchange to 91.238.7.10 on port 25 also is not working.

  • A list of files changed for Update Rollup 4 for Exchange Server 2010 Service Pack 3

    Hi.
    Is there a list of files changed for Rollup 4?
    After our RollUp installation, some files in the BIN directory still has the date of 2/5/2013 (SP3, no RollUp4), some has the date of 6/13/2013 (RollUp4)
    Despite RollUp4 looks like to have been installed, Exchange Server still reports it's running "Version 14.3 (Build 123.4)"
    Thanks...

    Hi,
    After you install an update rollup for Exchange 2010, the version of Exchange Server isn't updated to show that the update rollup is installed. This issue occurs because the version number that is displayed by the Exchange Management Console or by other
    administrative mechanisms is obtained from the Exchange Server Object in Active Directory.
    If you want to get the latest version of Exchange server, the article Andy provided is a good way.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

    Mine exchange server 2010 standard has Update Rollup 5 for Exchange Server 2010 (KB2407113) as latest update.
    Can someone help me which update i can install after this, can i start with
     Update Rollup 1 for Exchange Server 2010 SP1.
    Many thanks in advance

    My recommendation will be:
    Remove update roll-up 5
    Install SP1 check that everything is working
    Install SP2 check that everything is working
    Install SP3 check that everything is working
    I think it will be risky for you to go straight to SP3.
    Exchange Blog:
    www.ntweekly.com
    MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

  • Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

    Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
    Detected Problems:
    - Access denied for attached mailbox (department mailbox)
    - Access denied for delete or move messages on own mailbox
    - Can't send new messages with error (Error: [0x80004005-00000000-00000000])
    Solution:
    - Rollback to Exchange 2010 SP3 - Rollup 7
    - You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
    Algunos de los destinatarios no recibieron su mensaje.
    Asunto:     Hola
    Enviado el: 11/12/2014 8:35
    No se puede localizar a los destinatarios siguientes:
    '[email protected]' en 11/12/2014 8:35
    Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red. 
    Error: [0x80004005-00000000-00000000].

    See the following forum thread: 
    https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

  • Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"

    Hello,
    Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
    Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
    http://www.microsoft.com/en-us/download/details.aspx?id=41394

    (1)  I had to roll it back:
    The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors.  It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem.  Rolling
    back the update and rebooting the server seemed to resolve the issue.
    Issues reported before the general mailflow stopping for everyone:
    Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
    A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
    (2)   
    ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
    OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
    When he tries to open an e-mail, he gets an error message.
    If he tries to mark an e-mail unread, he gets a different message.
    Thanks Ben

  • Upgrade directly from Exchange Server 2010 SP1 to Exchange Server 2010 SP3

    Hi,
    We have current setup with Exchange Server 2010 SP1 ( DAG & CAS Array with WNLB).
    Can we upgrade directly from Exchange Server 2010 SP1 to
    Exchange Server 2010 SP3 . ? 
    Thanks in Advanced.
    Regards,Ali

    Hi Ali,
    Yes, you can. Please upgrade your Exchange 2010 SP1 server roles in the following order: Client Access, Hub Transport, Unified Messaging, Mailbox, Edge Transport. What's more, please note that when you install a Service Pack or update rollup on a server
    that's a DAG member, several services will be stopped during the installation, including all Exchange services and the Windows Cluster service.
    For more information, here is a helpful article for your reference.
    Installing Update Rollups on Database Availability Group Members
    http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange Server 2010 SP3 RU 8v2 & ActiveSync Device Quarantined Emails

    Hi there,
    We are using Exchange Server 2010 SP3 and I recently installed RU 8v2. We always had an ActiveSync Access Policy in place where the devices are quarantined until an Administrator goes in and approves or rejects this.
    Prior to installing RU 8v2, there used to be a link in the email sent to Administrators to click on to login to the ECP and approve this device. However, since the install of this update, there is no link in the emails now. It just informs you that you need
    to login to ECP and view the quarantined devices. Has this been removed in the RU?
    Thanks

    Hi,
    According to your post, I understand that quarantine notifications e-mail will not send to administrators after install Exchange 2010 SP3 RU8v2.
    If I misunderstand your concern, please do not hesitate to let me know.
    Please login ECP to double check the Allow/Block/Quarantine list rule configuration, for your reference:
    http://blogs.technet.com/b/exchange/archive/2010/11/15/3411539.aspx
    Besides, Exchange 2010 SP3 RU 9 has released on March 17, 2015. Please upgrade to latest version.
    Additional, this issue is related to ActiveSync. Please We recommend contact Mobility and ActiveSync Team so that you can get more professional suggestion.
    Please refer to:
    https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

Maybe you are looking for