Installing / Upgrading Exchange 2013 to Exchange 2010 with a o365 Hybrid environment

Hi
I am trying to install a new server with Exchange 2013 on an environment with an existing Exchange 2010 Sp3. Reason for that is that I have a o365 hybrid environment and need to disconnect my on-line and on-premise e-mail connection. I want to completely
run all my mailboxes on o365 no-longer dependent on on-premise exchange but the Exchange 2010 doesn't have a functionality to 'dismantle' the hybrid.. we need to have exchange 2013.
When I try to install Exchange 2013 I get an error message that I need to upgrade my o365 tenant. : my o365 tenant version is : AdminDisplayVersion : 0.20 (15.1.49.12) :IsUpgradingOrganisation : False.
Is there a better way of updating my environment.
Regards

Post the error from setup log for more information.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

Some help with migrating exchange 2010 to exchange 2013 + installing another exchange 2010 to be edge-forefront-proxy server

Hi guys (and girls)!
Hear me up. The idea is like this:
A friend of mine has currently Exchange 2010 SP3 in his environment with Forefront Protection installed on it. As we all know Forefront Protection is discontinued in Exchange 2013 environment because Exchange 2013 on-premisses is using integrated tool for
doing that, but a friend of mine would really like to stick with Forefront Protection because it is "much better tool" then integrated stuff in 2013.
Ok, so here's the idea. Exchange 2010 SP3 with Forefront is installed on Phisical machine (so, not virtualized) on 2008 r2 std OS. We decided to move to Exchange 2013 because we wanted to achieve DAG on Exchange 2010 but we realized that is not possible
because 2008 R2 STD OS does not support failover-clustering functionality, but you are able to achieve that on newer OS for example 2012? Ok, so we bought another server, where we are planing to install Vmware Esxi and put two virtual machines on it.
One Will be 2012 r2 STD OS with Exchange 2013 on it, the other Will be 2008 r2 STD with Exchange 2010 Edge role + Forefront on it. We are planing to move Exchange 2010 production server to virtual machine Exchange 2013, and newly virtual machine
with Exchange 2010 edge server will only be "a kind of Proxy server with Forefront functionality". What concers me?
Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
bostjanc

Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
already answered by PS CL above
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
No it does not as long you don't make any changes on send/receive connector and do the EdgeSubscription. As soon as you do the Edge subscription there will be send/receive connector created, so pay attention how to setup the Edge Server.
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
Just install the Edge Transport Server and make sure you install ADLDS services.
as you have mentioned you are doing to install both Mailbox and Edge server on the same VMware - it is a single point of failure.
Where Technology Meets Talent

Remove Exchange 2010 DC from single server environment coexisting with Exchange 2013

My new Exchange server (2013) has completed all the migration steps including public folders. Mail is working well. I do not use the old DC running Exchange 2010 for any local domain logins or computer control, it is strictly for OWA as is my new Exchange
2013. I went through the uninstall of Exchange 2010 with out error but cancelled it after it said it was ready to uninstall. When I shut down Exchange 2010 server mail no longer is available. What am I missing? I am using same Public IP and different
private (192.168.1.4 new EXchange 2013, 192.168.1.7 for Exchange 2010) I changed these settings in my asa Firewall and that is working with new settings as well. Send and Receive connectors are on new while old one have been deleted. Do my MX records
need to be updated to reflect new server (ex2) as opposed to old server name (ex)?
You can come to Maui for a "Site Inspection" lol!
System Admin

Hi
You need to make sure all your DNS settings are correct with the new server IP as well as autodiscover. Remove any routing connectors between exchange 2010 and 2013.
Not best practice to run exchange on a DC but if you comfortable you have migrated all system mailboxes, user mailboxes and that the settings on your new server match the old one then proceed with the uninstall.
Your ISP will obviously route mail to your firewall as you are doing the NAT from there.

Silent install of Exchange 2010 Mangement Tools (SP2)

Hello,
i am trying to create a silent install of Exchange 2010 Management tools.
I created a batch-file :
dism /online /enable-feature /featurename:IIS-WebServerRole
dism /online /enable-feature /featurename:IIS-WebServerManagementTools
dism /online /enable-feature /featurename:IIS-IIS6ManagementCompatibility
dism /online /enable-feature /featurename:IIS-Metabase
dism /online /enable-feature /featurename:IIS-LegacySnapIn
"share\Exchange 2010\Exchange2010-SP2-x64\setup.com" /r:MT
Problem is that this "MDT-application" needs to run as administrator (i tried to run the .bat-file, but it need administrator run).
Howto do this in MDT?
Problem 2: by the process of "copying files" the installation is stopped without error or message.
Any other working options to install the Exchange Management Tools unattended by MDT?
Thx

There is an easier way:
Under command line in your application settings, enter the setup.exe (not the batch file located on the network) with the appropriate parameters for silent install (http://technet.microsoft.com/en-us/library/aa997281(v=exchg.141).aspx).
Under the working directory, put the network UNC path containing your source files.
If you look in the task sequence you can add a new step (I typically add this under System Restore > Custom Tasks); under the category of Roles there is a "Install Roles and Features" step.
You can then just check the boxes for each individual role and feature you wish to have installed. I typically make a couple of different task sequences for server installations and based upon their designated function when put into production. This
process uses the servermanager process as opposed to using dism, so there is no requirement for changing account privileges, it just runs as administrator on the local machine.
You then add a second step after the role configuration step to install an application (located under General). Change the radio button option to Install Single application and when the dialog for which application to add is shown, choose your Exchange Management
Console application.
Now it will run automated (as long as you specified all the appropriate prerequisites in the roles and features) and you eliminate the need to try to sort out batch files and privilege escalation, etc.

What is the best way to get activesync to work on Exchange 2010 with co-existing Exchange 2003?

I currently have all my mailboxes on my Exchange 2003 server and I introduced my first Exchange 2010 server into the same environment so they are running co-existent. The mailflow is functioning properly so now I need to test out the activesync. From
what I've read, you have to create a SSL certificate with SAN on the Exchange 2010 server and create a legacy.domain.com name to point to the Exchange 2003 server. Then replace out the existing SSL certificate on the Exchange 2003 server with the
new one that was created for the Exchange 2010 server. However, my question is that if this does not work could I easily revert back to the original settings where Exchange 2003 server is doing the activesync instead of Exchange 2010? That way
I would not disrupt activesync from working.

The legacy url is not important for activesync, but:
Enable Integrated Windows authentication on the Microsoft-Server-ActiveSync virtual directory on the
Exchange 2003 back-end server
http://technet.microsoft.com/en-us/library/ee332348(EXCHG.140).aspx
once you point your external url for active sync at your 2010 it should proxy the 2003 active sync

BIS and Exchange 2010 with TMG

Dear all,
I stumped into this problem whereby my client has an Exchange 2010 with mixed-mode mobile users of Active Sync and BlackBerry.
They have this [url]https://mail.***.com.my[/url] as their OWA URL and credentials should be entered as:
Username: Domain\Username
Password: Password
This convention is the same irregardless users accessing from OWA or to setup Active Sync or BlackBerry.
Question are:
1. How do I setup BIS account on my BlackBerry? Method I use is log into my telco portal but the credentials I entered does not recognised by the system.
2. Alternatively, I tried to set it direct on my BlackBerry but was prompt the same error as above which is 'Username must be at least 4 characters'.
3. Does naming convention setup same for Active Sync users and BlackBerry users?
Any help would be greatly appreciated.

Hi and Welcome to the Forums!
rizauden wrote:
1. How do I setup BIS account on my BlackBerry? Method I use is log into my telco portal but the credentials I entered does not recognised by the system.
2. Alternatively, I tried to set it direct on my BlackBerry but was prompt the same error as above which is 'Username must be at least 4 characters'.
BIS itself is provided to you by your wireless service provider. With hundreds of different carriers in the world and dozens of different methods each, there's no way to be sure how to guide you with specifics. I suggest you ring them up and talk to them about how to enable BIS on your BB.
rizauden wrote:
3. Does naming convention setup same for Active Sync users and BlackBerry users?
I'm not sure how ActiveSync works, but the configuration instructions for OWA are here:
KB03133How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
And here are some further helpful KBs on the topic:
KB15173Locate the mailbox name for a Microsoft Outlook Web Access 2007 email account
KB02858Unable
to integrate a Microsoft Outlook Web Access or IBM Lotus Domino Web
Access email address with a BlackBerry Internet Service account
KB04804Error message appears when attempting to integrate a Microsoft Outlook Web Access 5.5 or 2010 account
KB18567BlackBerry
Internet Service cannot connect to a Microsoft Outlook Web Access
account using Microsoft Exchange 2007 or Microsoft Exchange 2010
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM

Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DK

Hello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help!

Cannot install KB982867 while trying to Upgrade exchange 2010 to SP3

I just had to reinstall Server 2008 standard with Exchange 2010. I am now trying to install SP3 on Exchange and got all the hotfixs but the KB982867. I go to the link on the install screen and it take me to a Archive page. I did find on the web a download
for the hotfix but it will not install. It turns out to be net frame works 4.0. This is the message I get. KB2532942 does not apply, or is blocked by another condition on your computer. I currently have installed net frameworks 3.5 SP1 and 4.5.1 . This
is the message I am getting during the install. Client Access Role Prerequisites
Failed
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http://code.msdn.microsoft.com/KB982867.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex28883C&l=0&cl=cp
Elapsed Time: 00:00:14
Thanks
Zman

Hi Zman,
Before you install KB2532942, you must have the .NET Framework 4 installed to apply this hotfix rollup.
The related KB for your reference:
Hotfix rollup package 2532942 is available for Windows Communication Foundation for the .NET Framework 4
http://support.microsoft.com/kb/2532942
If you have any further questions, please do not hesitate to post back.
Best regards,
Eric

SBS 2011 and upgrading Exchange 2010 to enterprise

Hi All,
We have A client running exchange 2010 on sbs 2011.
The client would like to upgrade to exchange enterprise so in place archiving can be used.
Can someone tell me if this can be done with our current install - and what it is I need to purchase to allow it do be done.
As I said above its exchange 2010 running on SBS 2011. Outlook 2013 and 2010 is used.
I'm sure this has already been asked at some point, but i just need a clear answer of what my next step is.
Thanks in advance.

Hi:
You need to purchase Enterprise CALs and key in the quantity and license number:
http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx
You only are required to do this for the users that want/need the additional features.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit.

Workaround instead of Upgrading Exchange 2010 Severs to SP3

Hi
I have a customer in an exchange 2010 environment who has 4 exchange servers in place with DAG and NLB setup. We plan to go ahead with a Hybrid setup however just need to clarify if there is any workaround that we could apply instead of having to upgrade
there exchange server to 2010 SP3?
Thanks & Regards
Aaqib

Hi,
I notice that you want to deploy hybrid environment, and don’t upgrade to Exchange 2010 SP3.
Depending on the Microsoft document, Exchange 2010 SP3 support hybrid deployment with Exchange 2013 CU1 or later version, however Exchange 2010 SP1 and SP2 are not supported.
More details about Hybrid deployment prerequisites, for your reference:
https://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
Best Regards,
Allen Wang

Upgrade Exchange 2010 from SP2 to SP3 RU4

Hi All,
We are planning to upgarde Exchange 2010 SP2 servers with stretched dag across 2 AD sites to SP3 RU4.
I have few questions.
1. We are planning to Upgrade HUB/CAS servers in both the sites in first week.
2. Then we are planning to upgrade mailbox servers in the next week in both sites.
3.
Do you think this is a good approach. Can some one please share best pratices document as we are using F5 load balancing.

Hi,
Vishwanath's suggestions are pretty helpful. Besides that, we should make sure that the update process should be managed to prevent all of the DAG members from being offline at the same time.
Here is an article about how to install Update Rollups on Database Availability Group Members for your reference.
Installing Update Rollups on Database Availability Group Members
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010 with Outlook 2007 Shared Contacts with Attachments

We have an Exchange 2010 server. There is only one Exchange server so all roles are on this server.
Found out that sharing contacts between users misses something.
If a user has Attachments or Notes in their contacts we can see via the Attachment column in Contacts that there are attachments.
But another user viewing the shared Contacts of the user above, cannot see if the Contacts have Attachments unless they open each one. The Attachment column states there are no Attachments. Is this how it is? Is it a syncing issue?
The image I have attached is what the user sees accessing a shared contact address book. It shows Notes and the Attachments columns. The contacts with partial words visible in the Notes column should have a Paper Clip Icon as they also have attached items.

Hi,
There is no related feature in Exchange server to manage Outlook view.
Additionally, I shared my Contact with another user in my Exchange 2010 SP3 with Outlook 2013 environment. And it showed the same results as yours. The attachments icon was not shown in the list view in another user’s Outlook but it appeared in my own Contact.
Thanks,
Winnie Liang
TechNet Community Support

Upgrade Exchange 2010 SP2 to SP3 getting fail

Hi,
I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
Preparing Exchange Setup
    Copying Setup Files                           COMPLETED
The following server roles will be upgraded
Languages
Hub Transport Role
Client Access Role
Management Tools
Performing Microsoft Exchange Server Prerequisite Check
    Configuring Prerequisites                                 COMPLETED
    Organization Checks
FAILED
     Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
    Language Pack Checks
COMPLETED
    Hub Transport Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
    Client Access Role Checks                                 FAILED
     Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Exchange Server setup encountered an error.
Thanks,
San

Hi,
Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
on domain controller holding schema master role.
Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Unable to install on exchange 2010 any roll

0
Hi, We have to install client access server roll on exchange server 2010 SP3 RU1 which has mailbox server roll. During installation, we received this error " The installed product does not match the installation source(s). Until a matching source
is provided or the installed product and source synchronized, this action cannot be performed." It is looking source for "RU1 exc.SP3\sp3\" which is not present. Now what we have to do? How can we do further installtion?

Hi,
Please check whether the .msi installation file missing or modified.
I find a related thread for your reference:
http://stackoverflow.com/questions/4648521/the-installed-product-does-not-match-the-installation-sources-error-when-unins
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Detailed information as below:
The MSI you think is the original probably isn't really. It sounds like you got yourself in a situation where PackageCode ( GUID ) A is installed and now you have an MSI with PackageCode B.
Take the MSI you have and run the following command:
MsiExec.exe /I foo.msi REINSTALLMODE=voums REINSTALL=ALL
This will "recache" the MSI with the updated PackageCode. You should then be able to uninstall either through Add Remove Programs ( Programs and Features ) or with the command
MsiExec.exe /X foo.msi Thanks
Mavis Huang
TechNet Community Support

Updated: Event ID 1006 - Can not delete Mails in OWA after installing SP1 (Exchange 2010) = Outlook and OWA Light are OK

Hi all,
4 Exchange Servers (2 DB + 2 CAS NLB Cluster) all Exchange 2010 SP1
Outlook work fine.
If I delete a message in OWA i became the following errors:
Internet Explorer:
Die Netzwerkverbindung ist nicht verfügbar. Wenn das Problem weiterhin auftritt, wenden Sie sich mit folgendem HTTP-Statuscode an den Helpdesk: 0.
Translation: The networkconnection is not available. If it happens again, contact the helpdesk with HTTP statuscode 0
Firefox:
Die Netzwerkverbindung ist nicht verfügbar. Wenn das Problem weiterhin auftritt, wenden Sie sich mit folgendem HTTP-Statuscode an den Helpdesk: 302.
Translation: The networkconnection is not available. If it happens again, contact the helpdesk with HTTP statuscode 302
Event ID 1006 MSExchange Mailbox Replication
Fehler: MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Before SP1 it worked fine.
Can somebody help me ?
Kind regards Andy

Hi,
First, I would like to confirm the following questions:
1. Does the issue occur on certain user mailbox via OWA or each user mailbox?
2. Which OWA folder’s email cannot be deleted, Inbox, Sent Items or each folder?
3. Which version of operating system is installed on the client machine, Windows XP, Windows Vista or Windows 7?
At this stage, I suggest you temporarily disable firewall and anti-spam for a test. If the emails still cannot be removed via OWA, please refer to the following article
and use isinteg tool to check and repair Information Store.
Description of the Isinteg utility
Thanks.
Novak Wu-MSFT

Installing / Upgrading Exchange 2013 to Exchange 2010 with a o365 Hybrid environment

Similar Messages

Maybe you are looking for