Installing USB 2 flash card drivers manually

I have purchased a USB 2/Firewire 400 HDD that also has a flashcard reader/USB 2 Hub built into it. The driver installer, that installs the flashcard reader and drivers for an Alcor chipset dosn't work.
I need help in manually placing the drivers or maby some one can point me in the direction of a site that has an installer for Alcor drivers that works with Tiger?
The file names on the drivers I currently have are "AlcorUSBStorageShim" & "AlcorUSBStorageClassDriver".
I just don't know were to put them?
The icons on the files have the USB logo on them and the info window says that the files are "Unix executable File (PowerPC).
Thanks for any help!
G5 Quad Core 2.5GHz 6GB RAM Mac OS X (10.4.6) [storage] X RAID's : [capture] Io : [decks] Betacam SP, S-VHS, DSR-11

I suggest you contact the tech support for that disk drive's manufacturer to find out why their drivers are not working.

Similar Messages

My g4 will not recognize my USB SD flash card

I am trying to use my USB SD flash card to open some pictures and I get a message that my with 10.4.11 G4 will not recognize the card. I used it yesterday.

What USB SuperDrive...?
For the Apple USB SuperDrive, see > Troubleshooting the slot-loading SuperDrive or take it to your local AASP and have it checked out.

IMac refuses to recognize USB with flash card

After I plugin my USB flash card holder, my iMac only occasionally recognizes it and then an error message comes up saying that the flash card was not properly ejected. The message disappears and so does my flash card! I may remove and reinsert it several different times and if it is recognized, I receive the same message.
To my knowledge, I have always ejected the flashcard properly.
How can i get my iMac to recognize the card so that I can use it?
Thanks for your help.
Vernon Snider

If you have not done so since noticing this problem, shut down (power off) the iMac, then start it back up. For hardware, just restarting is not the same thing.
Otherwise, you will have to rule out the possibilities.
(1) The card reader is bad. No way to test this other than to get a replacement.
(2) The flash card is bad. Try a different one to see if it works more reliably.
(3) The iMac's port is bad. If you have some other type of storage device, such as a USB external drive, try it on the same port.
(4) A problem with software (the system). Restart from your Mac OS X installation disc for the currently installed system; insert disc and start up with the C key held down. This will get you to Installer's first screen. Go up to the menu bar, and under Utilities, select to run Disk Utility. Connect the USB card reader with flash card to one of the iMac's direct ports. Does it appear in the Disk Utility sidebar? Does it stay there, without the ejection error message appearing?

Install usb 3 express card

I installed a Rocketfish usb express card today. The instructions say to connect a 4 pin floppy power plug onto it. My computer has this plug, but the wires don't reach to the usb card. The card still works without this plug connected anyway. ( I'm a little disappointed though, it's only about twice as fast as the usb 2) Will this be OK without the power plug connected?
Solved!
Go to Solution.

john54981 wrote:
I'm a little disappointed though, it's only about twice as fast as the usb 2
I had a similar experience (2x).
I got myself USB3 expresscard on my laptops. You really notice the performance change on quad core compared to my dual core..

HP ProBook 4520s Video Card Drivers issue

I've installed OpenSuse 11.4 on my ProBook 4520s but cannot install the ATI video card drivers downloaded from HP website because they have issues (the details are below). The same problem occurred when I was trying SLED 11.
Any help in resolving it is much appreciated.
# rpm -i --test x11-video-fglrxG02-HP-8.778-1.i586.rpm
error: Failed dependencies:
   ati-fglrxG02-HP-kmp is needed by x11-video-fglrxG02-HP-8.778-1.i586
rpm -i --test ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586.rpm
error: Failed dependencies:
   x11-video-fglrxG02-HP = 8.778 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:mm_slab) = 884143f7bb3b29d8 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_kernel_pci-dma) = 18f3a6981b885355 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:vmlinux) = 8556a89d270afd07 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_acpi_acpi) = dcfc4948b8a3784d is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_semaphore) = c7a91f1e83a87245 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_acpi_acpica_acpi) = 5f1dc75b51b76d9d is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_cred) = e51be686b5608bdf is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_char_sysrq) = 3095effabe71b430 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_kernel_acpi_boot) = d5557e0387b76d16 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_wait) = e8f53b6be41ec496 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_pci_access) = e3c01ee5da860b7b is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_char_agp_agpgart) = b8d7dac9fe36f951 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_pci_pci) = e1f235945f672640 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_mm_ioremap) = b24fb469fed14c09 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_mm_numa_32) = 9ef7c88ebfabb599 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:mm_vmalloc) = 00333fc478fb491c is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:fs_proc_proc) = f10e43fa097582b3 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_kernel_cpu_mtrr_main) = 26332824d47d19a4 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_freezer) = d5eabe004495daf0 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:lib_kernel_lock) = 33d46f710a4cfe1b is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:mm_mmap) = 952f8c05e4ec9fbe is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_spinlock) = c587e1beb0442cf5 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_params) = 7a2a1002ec0a9ea5 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_sched) = cd502055ee9cb337 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:mm_page_alloc) = 19378ac62ac91e4f is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_printk) = 00d8bd08f3a3d5be is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_rwsem) = ee607b7f03367958 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_signal) = d6ba4771bd5e37d8 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_pci_msi) = 38af3a9e6efaeb48 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_char_vt) = 7e446b394c663515 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:fs_char_dev) = 7643f5a0f32bebcc is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_pci_search) = 6c3be8c8a064386e is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_smp) = 40477101ad48c38a is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_kernel_setup_percpu) = 17d1f6c8d23285f9 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_kernel_setup) = 0d7b73d5efacc61f is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_mm_pageattr) = f770895c2125b50b is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_kernel_dumpstack) = 5ef8ca5e1af7a7b7 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:mm_highmem) = f48bc6443314c6bf is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_cpu) = b8f238ad57f79074 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_char_random) = bf28b0770e45055d is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_time) = bce22ae6bc382d05 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_capability) = 21ae5dc41a677bfa is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_mm_highmem_32) = ca35d819de7781a6 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_irq_manage) = 6bee263615b7d85a is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:drivers_pci_pci-driver) = 4f3d6d9acf106062 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:mm_memory) = 9941affe5f6ca853 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:mm_mempolicy) = 2d4aa8973083e641 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_module) = e4b3c22771c796a9 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_kthread) = 3d9f6dbb1283d5ee is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:fs_fcntl) = 5c0d0de0bb371b8c is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_softirq) = 8dd3868852cd9aff is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_kernel_cpu_common) = a5219bad46e9ed44 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:lib_hweight) = 164fda3d6013e0fe is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_timer) = 5941964e823d8cb1 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:arch_x86_kernel_tsc) = bb573884e9c8a42a is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:mm_swap) = bbd208c56f3d3bf9 is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586
   kernel(pae:kernel_panic) = 244b172e2d8fbf2e is needed by ati-fglrxG02-HP-kmp-pae-8.778_2.6.32.12_0.7-2.i586

Did you find solution to your problem ^

Flash card on Sparc T4-4

Hi does someone knows if it is possible to install a F40 flash card on a Sparc T4-4 ? I know it is possible on a T4-2 because of the pcie slots but on my T4-4 there are pci express modules!!!
Sun Flash Accelerator F40 PCIe Card| Flash Storage | Oracle
Thank you
Jp

This card is currently not certified for this model and this is also the case for the F80 card.

Use compact flash cards to transfer drivers?

Once I install Win XP I figure I could setup my internet and get all the drivers I need. Out of curiosity, if I can't configure my internet properly for whatever reason, could I tranfser files on a compact flash card? I have a 512 MB CF card for my Canon S1 and this PC and the Neo2 I'm setting up has a floppy card reader. I could put all the drivers I need on the CF card and transfer them over? Apparantly XP doesn't need a driver to use the CF card reader. I also have an external USB card reader I could try instead. Just wondering if that would work.

Shouldn't be a problem if you have the card reader.

Bluetooth does not start at Satellite L850-BJS when Flash Cards installed

With installed Toshiba flash cards Bluetooth is not working, when I delete all works.

I installed in this sequence:
Bluetooth Filter Driver Package Realtek Semiconductor Corporation 2.3.9.0211.2012, then Bluetooth Stack 9.00.00T, then USB Driver AMD Windows 7 - 64 Bit 1.0.0.72, then Display Driver AMD Windows 7 - 64Bit 8.942-120213a-133550, then Wireless Lan Driver Realtek Semiconductor Corporation Windows 7 - 64Bit 2.00.0020, then Value Added Package Toshiba Windows 7 - 64 Bit 1.6.0023.640204 .
But BT does not work with instaled flash cards

USB flash card doesn't work

Hi,
I' ve just bought a new Transcend 16GB USB flash card. It works properly when I move files from it to my Macbook Air running Lion.
When I try to move files from the Mac to the flash card, the copy doesn't start and the system stays blocked in "calculating remaining time".
I tried to format it with FAT32 and HFS but nothing changes.
On Windows7 (installed as well on the Mac) the USB flash card works perfectly in both ways.
Can u help me?
Thanks
Marco

I tried with another USB flash card and with a smaller file.
The transferring from Mac to the card starts but is extremely slow ( around 0,5MB/sec)

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why does not USB flash card work?

MacBook Pro 13' (late 2011)
OS X Yosemite 10.10
My USB hub does not see any flash card, but it works when I use my iPhone.
What have I done: I tried to open my flash card. Then, I cleaned my flash card with Disk Utility and tried to connect to Mac again. I also tried to use different flash cards. But there was no effect.

Thank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi

Is it possible to install a USB 2.0 card in an old eMac?

Hi,
This is probably an embarrassingly ignorant question, but I'd be grateful to know whether I can install a USB 2.0 card in my old eMac 1GHz PowerPC G4 (1GB RAM) running 10.5.6, which only has the old USB 1 ports buitl in. Basically, I'd like to be able to sync my iPhone and attach other newer peripheral devices, such as external hard drives with USB 2.0 connections.
Thanks!

This is probably an embarrassingly ignorant question, but I'd be grateful to know whether I can install a USB 2.0 card in my old eMac 1GHz PowerPC G4 (1GB RAM) running 10.5.6, which only has the old USB 1 ports buitl in.
You can't.
(40568)

Boot Camp Question .... I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp. If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"

I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp.
If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"... will it make my mac suseptible to viruses overall due to having a windows component? also will it make my mac slower as well

If you are only going to use one or two window only programs then I wouldn't waste the space. Try WinonX it allows you to install exe. Files on Mac without installing windows.

Re: Satellite A200 PSAE6E: Cannot install Flash Cards - invalid serial number

PLEASE I CAN'T INSTALL THE FLASH CARDS SUPPORT UTILIY, ALL THE TIME AT THE END IT SAY'S
"THE SERIALNUMBER IS INVALID"
PLEASE I NEED YOUR HELP TO INSTALL
FN KEY IS NOT WORKING PLEASE HELP ME. WHAT CAN I DO PLEASE ?
I'M USING VISTA HOME BASIC 32 BIT
PLEASE I NEED YOUR HELP.
Message was edited by: niijosh

Hi, I had a similar issue on Sat Pro A200 PSAE7E. wrote to Toshiba support and got the following reply (in July) - never heard from them again but the older Canadian version worked for me:
Thank you for emailing Toshiba regarding your issue with Toshiba Flashcards.
The issue you have highlighted is currently being investigated by our level 3 team because unfortunately, you are not the only customer affected by this problem.
The only alternative we can currently suggest is to download and install the Flashcard Utility update from our website in Canada. This has been found to resolve the issue in most cases. The web link for this update can be found here:
http://209.167.114.38/support/Download/files_Downloads/psae6c/TOSHIBA-Flash-Cards-Support-Utility.zip
If you wish for further support with this issue, please feel free to contact us by email again or call in to our Technical Support department on the number shown below. However, we would like to point out that this issue is being worked on and that a solution should be provided soon.

Need to know how to disconnect the camera Nikon Ds3 (USB cable) properly after uploading images through bridge-do not want to lose images on compact flash card.

Need to know how to disconnect the camera Nikon Ds3 (USB cable) properly after uploading images through bridge…do not want to lose images on compact flash card.

Give #navbar a width that is wide enough to hold all of the buttons within it.
#navbar {
width:####px;
Replace #### with a pixel number large enough to hold the nav buttons.

Installing USB 2 flash card drivers manually

Similar Messages

Maybe you are looking for