Installing Utility on Vista for Wireless -G Music bridge
There is a lot of good info here on the forum for this bridge but none have actually made the thing work. I am not concerned with the router itself just yet, I just need a working utility to connect to it. The one on the website fails to install with some DLL errors as does the setup for the router software.
I have the router setup and it is discovered on network just fine. My issue is making the utility install and run. When I run the install setup for router install after downloading from this site it errors with 'This application failed to start becuase PW32N50.DLL was not found' When I run the install for the utility it fails with CmAudioW.dll could not be found.
Then there are error windows saying the Linksys program is not responding to close or look for solution online. There are no linksys programs installed, no folders, nothing anywhere showing anything has been installed from linksys or W-wireless whatever the folder is.
This isnt worth the 3 hours I have spent on it but I like to make things work and hate to admit defeat! Kind of like the show the Middle with the mom and the universal remote!
What version of Vista OS Installed on your Computer? Is it 32bit or 64bit? If you are unable to run the setup on your Computer, then you can try to run the setup in then Compatibility Mode Select Windows XP in the Compatibility Mode and install the WMB Software on your Computer.
Similar Messages
-
How do I install Utility Mpeg2 Component for Lion?
I know people have asked similar questions, but I don't understand the answers that have been given. I want to use MPEG Streamclip and just bought my first Mac (with Lion). I installed MPEG Streamclip 1.93b7 beta, which I understand is required for Lion. When I open the file, I see the icon for "Utility MPEG2 Component Lion." I understand that I am supposed to open this, but I am not able to. I get a message telling me to double click the file "QuickTimeMPEG2.dmg" in order to open the QuickTime MPEG2 disk image. However, I am unable to find the file "QuickTimeMPEG2.dmg." Where do I find this?
I looked in the Quicktime folder and found a number of files, including QuickTimeMPEG.component and QuickTimeMPEG4.component, but no QuickTimeMPEG2.dmg."
Thank you so much for any help! I am new to Macs and am not really familiar with the terminology.I know people have asked similar questions, but I don't understand the answers that have been given. I want to use MPEG Streamclip and just bought my first Mac (with Lion). I installed MPEG Streamclip 1.93b7 beta, which I understand is required for Lion. When I open the file, I see the icon for "Utility MPEG2 Component Lion." I understand that I am supposed to open this, but I am not able to. I get a message telling me to double click the file "QuickTimeMPEG2.dmg" in order to open the QuickTime MPEG2 disk image. However, I am unable to find the file "QuickTimeMPEG2.dmg." Where do I find this?
I looked in the Quicktime folder and found a number of files, including QuickTimeMPEG.component and QuickTimeMPEG4.component, but no QuickTimeMPEG2.dmg."
Thank you so much for any help! I am new to Macs and am not really familiar with the terminology. -
HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)
Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
davidI went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David
-
Just got Airport Express to save on GBs of data. I have already a Westell 6100G which is for use as Internet Broadband, via Verizon. How do I set up the Airport Express with this Westell. Do I even still need the Westell, or do I need to also buy a wireless router? I'm a tech idiot and this is driving me nuts.
The Westell 6100G is a combination modem and router or gateway device. The AirPort Express is a wireless router.
Since the Express does not have a built-in modem, you will still need your Westell gateway in order to access the Internet.
Which exact model of AirPort Express do you have. It will be written (in very hard to read type on a label on one of the AirPort's sides). It should look something like: A1392. It may also state a Order#. In that case it would look something like: MC414LL/A
Regardless of which model you have, the basic network configuration would be that you would connect an Ethernet cable between the Westell's Ethernet port and the WAN (circle of dots) port on the Express. (Note: If you have an earlier model of the Express, you would connect the cable to the only Ethernet port on the Express.)
The good news is that you will not have to make any configuration changes to the Westell. We should be able to use it as configured.
What we are going to start with is getting a basic Wi-Fi network that should provide your computer with wireless access to the Internet. Once verified as working, we can fine-tune this network to include wireless security and any other goals that you may have.
Ready to start?
I would recommend that you do the following as a minimum:
Power-down the Westell and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the AirPort Express base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
Once the reset has completed, remove the AirPort Express from power.
Connect an Ethernet cable between the Westell and the AirPort Express.
Power-up the Westell; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advanceYou are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart -
Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?
Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
ThxI've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence? -
HT1222 i have installed the latest update for itunes, (win 8 os) itunes no longernplays my music???
i have installed the latest update for itunes, (win 8 os) itunes no longernplays my music???
Hi Mike H555,
If you are having issues with iTunes after an attempted update, including device recognition issues, you may find the following articles helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.
All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC -
I downloaded the Airport Utility 5.6 for OS X Lion and when I finish installing it sends a message that says "the instalation failed contact your software provider" And seems like thats the solution so I can use my time capsule.
ThanksThanks. Please review my post above to see that we asked five basic questions.
Looks like we got two answers.
Can you please provide answers to the other questions that we asked?
1) Are you trying to connect your Time Capsule to your modem using an Ethernet cable?
2) What is the make and model number of your modem?
3) Are you still using Lion (10.7.5) as you indicate in your profile, or have you updated to Mountain Lion or Mavericks?
I understand that things appear clear to you there, but we cannot read your mind or see your network, so we only know as much about your problem and your network as you can tell us. -
AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest
Part of your message was not included. Can you re-post with details again please?
-
Problem installing Service pack 1 for Windows Vista 32-bit from windows update
I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.
Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul -
How do i set up my hp c4360 for wireless if the printer is already installed???
hi
How do I set up my hp c4360 photosmart for wireless, asi tis already installed on my Dell laptp xps,
I put the installation disc in and it says printer already installed, I have a linksys wireless router
I didnt have the patience to figure this out but its getting to be a pain to drag the laptop to the printer every time I need something printed. I am not real savvy with technical things, the Comcast guy setup my wireless router for me so i am hopin this won't be too complicated
thanksVerify that you can browse to the printer's internal web page by its IP address.
1. Click "Start" button --> Printers and Faxes.
2. Under Printer Tasks, click "Add Printer".
3. Click "Next" button on the Add Printer Wizard window.
4. Select "Local printer attached to this computer". Deselect "Automatically detect and install My Plug and play printer". Click "Next".
5. Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
6. In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and connected to same network that your computer is connected to. Click "Next" button.
7. Under "Add Standard TCP/IP Printer Port" enter the printer's IP address. Click "Next" then click "Finish".
8. Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
9. If you can't find your printer, you'll need to find the install CD and use the "Have Disk" option to select one of the hp*.ini files. Alternatively, you can select another HP printer model from the same type.
10. Add the print spooler name and click "Next".
11. Click "Next"
12. Click "Next" and then "Finish"
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
No sound from my speaker iphone 4S, headphones play normal, phone rings normal, alarm sound normal, re-installed software, will not play sound when music is played from speaker but speaker works for everything else....(phone ring and alarm)... no notification sound for text messages......
I checked all settings..... good...
confused???
please advise,it's a hardware issue read more about it here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more hits
https://www.google.dk/search?client=opera&q=4:3&sourceid=opera&ie=utf-8&oe=utf-8 &channel=suggest#client=opera&hs=UGk&channel=suggest&sclient=psy-ab&q=iphone+stu ck+in+headphone+mode&oq=iphone+stuc&gs_l=serp.3.3.0l4.412779.418971.0.420896.16. 9.2.5.5.0.86.545.9.9.0...0.0...1c.1.9.psy-ab.HHtp6aEcO5U&pbx=1&bav=on.2,or.r_cp. r_qf.&bvm=bv.45175338,d.bGE&fp=43d9a4347e8aaeda&biw=1535&bih=773 -
Purchased recovery disk Vista for Satellite A205S4607 install freezes after files are copied
I purchased the recovery disks for Vista for Satellite A205S4607. I had XP professional installed, but I could not find the drivers needed so I decided just to buy the disks.
I insert the disk, hold down C as it is booting. The cd runs, and copies over the files, but once it gets to the status bar, the install freezes. I let it "run" all night and it never came to an install screen.
Any suggestions?It sounds like it's likely a hardware failure in the laptop itself. Were you having problems previously?
- Peter -
I just bought a new HP OfficeJet Pro 8600 printer. I have been unable to download the installation for wireless connection even though have had the assistance of Costco tech, HP tech and some advice from Apple. Because the system is MacOs 10.5.8 the error says it is incompatible, even though the product lists compatiblilty with 10.5, 10.6. I was advised 1 option might be to obtain Snow Leopard for installation, however am somewhat reluctant as the bo states 10.5 should work and Snow Leopard is 10.6, which is also listed as compatible. I am unable to get the printer to work even with USB cable. Too much time spent on this and I hate to start over with another printer because I'm afraid I might have the same trouble. Is Snow Leopard something I should get anyway? Help!
Snow Leopard has more compatible Java.
https://discussions.apple.com/docs/DOC-2455
explains more about upgrading to Snow Leopard.
If that doesn't work to fix the problem, then see my FAQ* on printing:
http://www.macmaps.com/printersx.html
Maybe you are looking for
-
Just wondreing if anyone can tell me if a AMD AthlonXP 2600 [2.08GHZ 333] OEM would run ok in a K7T266 PRO 2 (MS6380) M/BOARD? What I need to know is will it run at its full potentual? Or will it not be able to (does an older board support a newer pr
-
Hi, I have tried to have a phone line installed but there was a problem with the phone pole that needs BT to sort, I got through to the provisioning team on Monday and they said they would call me back yesterday with some info but they didn't. What's
-
hi, Can any one help me in the Vendor rebate agreement configuration. Ammount is getting accrued,but I am unable to do the settlement, as it is throwing error, releated pricing. Regards, Sridhar
-
I can't load firefox 18. It asks if I want to uinstall older version if you answer no it dumps you out. If you answer yes it reboots and nothing changes
-
Anybody here using Lion and Quickbooks 2009? Thinking about upgrading to Lion from SL but a show-stopper will be whether or not QB 2009 works with Lion. I got an email from intuit that says QB 2009 is not supported in Lion but there is a difference i