Installing v.1.42_2 over 1.41...

Greetings,
I was forced to do a clean install of Windows 2003 Enterprise Server.
As the upgrade from 2000 Advanced Server failed. I was able to copy
all the folders that I felt I needed to a different partition in order
enable me to retain alot of previous installations, along with all
my previous environment varibles. Java v.1.41 is one of those folders.
I then simply copied the folders back to their original locations after
the 2003 install finished. All my previous browser installations
work correctly using the 1.41 folder. My question is, as I am not
able to use the standard Control Panel > Add/ Remove Programs procedure
to uninstall v.1.41. How will I best install v.1.42_2? Can I simply
install it in the same folder as 1.41? Or will I be able to delete the
1.41 folder after the 1.42_2 installation without any problems? Other
solution?
Thank you very much for all your time and consideration in this matter.
Chris

So, all of the InstallShield data and Registry entries for 1.4.1 were lost? If so, then the only 1.4.1 information that exists are the folders that you restored (which don't have an uninstaller).
You should be ok if you first delete the restored folders, then do a new, clean install of the 1.4.2 version. Don't try to install over the old version.

Similar Messages

Can i install windows 8.1 over xp in bootcamp

Can I install windows 8.1 over xp in bootcamp?

Is it on the system drive? on its own drive or is it large enough?
Windows 8.1 will run even without Apple's drivers just fine except for a couple items.
Boot Camp forum probably is best place.
Boot Camp is software (and a forum) as in drivers and Boot Camp Assistant.
You have to do a "custom" clean install, you can't upgrade from within XP, you should of course be using 64-bit and Pro for supporting two cpus.

Able to install Acrobat 9.1 over the pre-release build

I am able to install Acrobat 9.1 over the pre-release build, however, the release notes say otherwise i.e. to un-install the pre-release build before installing the 9.1 release. Let me know whether to log a bug for the same.

I do not have posting privileges on that forum. I did use the forum to send a message to Apple but have not got a reply yet.

How do I install LabVIEW 6.0 over the evaluation version? I can't un-install the evaluation version.

I get the message that another version of LabVIEW 6.0 is already installed and it won't let me install 6.0. How do I get rid of the evaluation version?

I don't have LabVIEW in my Add/Remove Programs. I may have at one time, but
can't remember. The removal must have been incomplete becasue LabVIEW 6.0
says "Another version of this produce is already installed." The same thing
happens if I try to reinstall the evaluation version.
Ron
JeffD wrote in message
news:AJSO6.29900$[email protected]..
> Do you get an error when you try to un-install the eval version? I am able
> to successfully remove it, via Add/Remove Programs in Control Panel.
>
> Jeff
>
> "Raytheon Ron" wrote in message
> news:[email protected]..
> > How do I install LabVIEW 6.0 over the evaluation version? I can't
> > un-install the evaluation version.
> >
> > I get
the message that another version of LabVIEW 6.0 is already
> > installed and it won't let me install 6.0. How do I get rid of the
> > evaluation version?
>
>

I am trying to install Lion OS X over Mac OS X Snow Leopard 10.6.8

I am trying to install Lion OS X over Mac OS X Snow Leopard 10.6.8
I get an error message: "There are currently other logged in users who must be logged out before you install Mac OS X".
I switch to log out other users and deleted everyone listed. It still says: ....
There is no one else left. I don't know what to do now.
Bill

I don't know what you mean by "I switch to log out other users and deleted everyone listed" -- if other user accounts are on your Mac you just need to log them out, not delete anything -- but it may be that there are other user accounts you aren't aware of on the Mac.
Are you an admin user? Did you originally set up this Mac?

Install iTunes 10.7 over iTunes 11?

greetings,
my question is:
how does one install iTunes 10.7 over iTunes 11 if one has iTunes 10.7.dmg?
here's where i am now:
this mac has OSX 10.7.5. i tried iTunes 11 a month ago on an older mac that i'm getting rid of. it has a bad bug and doesn't work right with my 120Gig iPod. so i can't use it. haven't had time to report the bug yet, but it's on my list to do...
somehow iTunes 11 showed up on my work MBPro yesterday without running software updater. i always decline installing iTunes 11. i used iTunes 10.7 tues night. and last night (wed) when i plugged in my iPod, i got the new software license screen "accept/decline" etc. i checked get info on iTunes in /Applications, and sure enough, it shows version 11.0.1 and a modificaiton date of wed morning (?). i was in meetings most of the day and software NEVER ran... but i digress...
regardless of how this happened, i'm trying to fix this and reinstall the previous version...
i found and downloaded iTunes 10.7 installer on apple's website. but when i run the installer, i get a message "iTunes can't be installed on this computer because a newer version is already installed"... never seen this before...
so i tried deleted iTunes 11.0.1, and get a message "iTunes can't be modifed or deleted because it is required by OSX"! ??
i've never seen this before either.
so i assumed i need to boot from an external drive so that i can delete iTunes... we have no "boot" dvd anymore. but i have an exteral drive with the complete OS and various utilites so that i can boot from an external disc in case i can't boot from the internal drive or need to run a utility like diskwarrior... but my company has forced a third party disc encryption software. so this prevents me from mounting the internal drive when i've booted from my external drive. there goes all of my repair and recovery tools, but i digress...
this is a new MBPro. it took me forever to configure and get software installed because of the shenanigans of the companies IT department and the lack of physical media from Apple and other software vendors. i just finished the same day i had to leave on a trip.
so i'm trying to figure out how to install iTunes 10.7 if iTunes 11 is already installed.
i'd appreciate any suggestions.

ok, found a way to delete iTunes from terminal
sudo -rf /Applications/iTunes
then i can run the installer for iTunes 10.7...

Problems Installing Designer 6.0 over Oracle 8i (Linux SUSE 8.0)

I have problems installing Designer 6.0 over Oracle 8i (Linux SUSE 8.0). When I try to create the repository the installation hang up. I try over Oracle 8i (WIndows 2000) and the problems remain.
Please any body can help?
Is it possible to install Designer 6i and generate forms 6.0 (I mean for using Developer 6.0 (NOT 6i))?
Best regards,
JAGC

Marcel,
I had the same problem. Oracle gives as an answer that Designer 6.0 is not supported against 8.1.7. In the specified package a statement is issued which is a problem for 8.1.7. I changed that package and now it works fine.
Comment as below and replace with the delete statement, then it compiles fines.
I don't know if any problem can occur after that, but a Migration from a 1.3.2 repository to 6i works fine through this repository. Hope this helps.
Kind Regards
Jan Boersma
Email: [email protected]
see here:
-- Remove Reserved Names entry and comment
-- delete from sdd_reserved_names
-- where (rn_res_name, rn_type) in ((upper(view_name), 'VIEW')
-- ,(upper(pack_name), 'PACKAGE')
-- ,(upper(pack_name), 'PACKAGE BODY')
-- ,(upper(app_view_name), 'VIEW BODY'));
delete from sdd_reserved_names
where ((rn_res_name = UPPER(view_name) AND rn_type = 'VIEW') OR
(rn_res_name = UPPER(pack_name) AND rn_type = 'PACKAGE') OR
(rn_res_name = UPPER(pack_name) AND rn_type = 'PACKAGE BODY') OR
(rn_res_name = UPPER(app_view_name) AND rn_type = 'VIEW BODY'));
null

"You need to install Switchboard"...over and over and over...

Okay, running kuler Desktop on my Mac, G5 PPC running 10.5.8 OS.
I downloaded kuler Desktop, figured it looked like an awesome way to speed up my using this online tool and even bring swatches directly into my CS3 apps.
However, I have AIR installed, kuler Desktop, and when I went to use the Photoshop or Illustrator import options, it immediately popped up saying I had to install Switchboard. Fine. I downloaded it, installed it, restarted kuler Desktop.
It did it again. Okay, fine. I dumped everything, including kuler Desktop, re-installed everything, even restarted the whole computer. But when I go to do anything other than download it to the desktop, when I go to bring it into any of the CS3 apps, I keep getting the same "You must install Switchboard" option. And yes, I've tried dumping the plist and preferences files as well, to no avail. And yes, the applications I've tried have been open at the time. I did some searching and reading on this before posting about it, to try and find if someone had reported a similar issue. But nobody mentioned the Switchboard install thing coming up over and over again, just that the feature wasn't working, so I thought I'd post specifically about this to see if it's the same issue or if there's as yet a solution for it so it works properly.
What's going on? Is kuler Desktop for Mac just fundamentally not yet working right or what?
I really want to use this app, but if all I can do with it is download the straight ASE files to my desktop, I might as well dump it and go back to using the online version since that at least is a bigger display. I like the desktop version because it's fast, directly on my computer, and has this advertised import-into-CS3 option that would save me some time if it worked. I've attached a screen capture so you can see exactly what I keep getting when this happens.
Any help to clarify this or correct it would be greatly appreciated. Thanks!

Reboot your computer, then try to log in.

HT1338 somehow I installed the old pages over new pages for OSX Maverick now I have 2 and new version won't open files?

Somehow after upgrading to OSX Maverick I downloaded new pages version and loved it. Somehow l LAST WEEK I downloaded the old version of
pages and now the new pages files wont open? How do I uninstall the old pages?

You should be able to reinstall the new version.....
Out of curiosity, how did you install the old version over the new? I would have thought that was impossible.
Barry

Can I install Snow Leopard directly over Tiger?

Running iMac 7,1 on Tiger (10.4.11). Have 1 GB RAM and a 2 GHz Intel Core 2 Duo processor. Can I install Snow Leopard
directly over Tiger?

Yes, you will be upgrading your system, take a look at this link, http://support.apple.com/kb/HT4949

Install 10.6.8 over Tiger Intel to Continue Using Sophos

I am currently using Sophos for Mac Free Edition 8.0.21C on my iMac Ma200LL/A Core Duo 2gigs, 2gigs of ram. As of April 2014 Sophos will only support 10.6.8 + above with version 9. No new virus definitions will be available, but I can continue to scan my computer for existing definitions. I still enjoy using Tiger Intel, fulfills all my requirements, runs very fast on my iMac Core Duo. As an alternative shall I think about using ClamXav 2.2.1 the last version for Tiger Intel that still offers the newest virus definitions as well as current system scanning. I think Sophos is the best because of its reputation in the enterprise sector. Or might it be time to install 10.6.8 over Tiger Intel, then continue using Sophos to be optimally safe on the internet? Thanks, Ken.

Ken Kline wrote:
I shall continue to use Tiger Intel with ClamXav 2.2.1 as long as support for Tiger Intel continues.
I guess I'm a bit confused by what you mean by support.
I'm sure you realize that Apple hasn't supported it since Sep 2009 and there won't be any software updates beyond ClamXav 2.2.1. The scan engine will continue to work and could possibly be updated by you with some degree of difficulty. The signature updates are the only thing that will continue and there are even plans to improve the OS X coverage that is TBD. The only danger is that the ClamAV® folks did disable engine 0.94 back in 2009 with no warning, so hopefully that won't happen again.

Can't install 10.0.1 (over 9) on a Mac (can't select previous version)

I can't install 10.0.1 over 9.4.1 on my Mac (10.6.6) because I can't select the previous version during the installation process…I thought maybe I needed version 10 to update, but I went to Adobe's downloadable "older versions" and it just has 9.4.
Is there something else going on, or does anyone have an FTP URL with version 10.0.0 available for download?

You are probably trying to install update and not full installer. 10.0.1 updates can only be installed if Reader X is in your system. Here you have Reader 9.4. You can update this Reader to 9.4.2 and not 10.0.1
If you want to install Reader X on Mac, go to http://get.adobe.com/reader
This will download Reader X (10.0.1 full installer which includes the update) installer package on your system. Run this package to install Reader 10.0.1 on your system
Thanks,
Karan

I am trying to install XP Home Edition over Windows 7

Hello, I have been all over trying to resolve the problem detailed below and hope you can help me.
I have a HP Pavilion Elite - HPE 180T - OS Win 7 64 bit.
System Info: 9 GB Physical memory - 5 memory Modules - Video Card1.8GB NVIDIA GeForct GTX 260 (2 DVI, HDMI and VGA adapters)- Intel(R) Core (TM) i7 CPU 950 @3.07GHz - 8GB DDR3-1066MHz SDRAM (4 DIMMs) - 1 TB 7200 RPM SATA 3Gb/s hard drive.
Problem: I do not want Windows 7 and am trying to install XP Home Edition with Service Pack 2 - Full Version/CD ROM. I put the disc in and the install option is greyed out. What do I need to do to prep my system to accept the installation? I have my system backed up. If I erased my hard drive would that work? Is there a way to install over the Win 7 or have both OS's installed? I've seen advise to adjust the BIOS but can not figure out how to bring the screen up on start up. I looked in the HP manual and can not find the information.
Any direction is most appreciated.
Thank you
B. Rappl
[email protected]
Revere, MA
This question was solved.
View Solution.

Hi,
Windows XP is an unsupported OS and installing XP may void your warranty.
If you still want to use XP, I would make sure you create HP Recovery Discs before you start anything. Wiping the hard drive should allow you to install XP. I'm not sure what options you have on the XP installation disc but I would look for an Advanced option and try a Dual Boot or Dual Install if you want to run both operating systems. For help, do a search for "dual boot windows 7 and XP" or something similar and browse the results.
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

How do you RE-INSTALL Leopard 10.5 over already installed LEOPARD upgraded?

I have an iMac computer that originally had Tiger installed. I did all the updates to Tiger and was ready for Leopard. I used "Super Duper" and cloned my hardrive before I installed the new Leopard (10.5 dvd) using th UPGRADE option. After installing Leopard (UPGRADE) and upgrading to 10.5.2 I felt I might get better results with either a "CLEAN INSTALL" or an "INSTALL & ARCHIVE." So, I put the LEOPARD 10.5 DVD back in my Mac, thinking the INSTALLER CHOICES of UPGRADE, ARCHIVE & INSTALL or CLEAN INSTALL would show up again and I could just ERASE this version of Leopard and do the CLEAN INSTALL or ARCHIVE & INSTALL and start over! Well when i put the DVD in the BIG X with the install and restart but not the INSTALL CHOICES? i tried 'OPTION" key hod down and "C" key hold down. what do I do? Thanks in advance for your support and help

baltwo wrote:
If you installed the Time Machine & Airport update, the install disk probably doesn't recognize the HD.
really?? I would find that very strange. Archive and install should definitely be possible anyway. At the screen where one sees the choice of a disk to install to, there should be an "Options" button. Clicking on it should bring up a screen with a choice of upgrade and install (I believe that's the default), archive and install, and erase and install. Choosing archive and install should allow one to proceed.

Failed to install Officejet Pro 8610 over Ethernet on Windows 8.1 64-bit

When attempting to run the installation of Officejet Pro 8610 using wired Ethernet connection the setup quickly lists the printer with correct IP and MAC address but when this is selected takes ages in the "installing" state and eventually displays a graphic indicating that the connection is broken.
I have tried disabling firewall (ESET) and a clean boot, and have downloaded latest software.
The printer is connected using a cross-over internet cable, can be pinged and obvious is detected by the setup program.
Attempting to install using WiFi has the same results, ie finds printer but then fails (although I haven't retried this since downloading latest software or with a clean boot).
FYI the printer will work when connected using a USB cable. (has been disconnected and software uninstalled before re-trying above). Don't really want to use this as the printer will be too far from normal working position. Wifi would be preferred but cabled Ethernet would be OK.
Also printer works OK via Wifi using e-mail.
Computer is a HP ProBook 4530s which has recently been upgraded to Windows 8.1 Professional x64 with no other significant problems.
Apologies if this is already answered elsewhere but couldn't find any replies which refer to something not already tried.
Thanks

Downloaded and ran the HP Printer Install Wizard for Windows as suggested, still did not work. Here are some screen shots of what happenned
Right Click on Open File Location (step 3) opens the window in the previous screen shot.
I never saw any of the items in step 4, but double clicking the shortcut that was displayed started the same installation process that always fails, see following screen shots. Note I disabled the firewall while running this.

Installing v.1.42_2 over 1.41...

Similar Messages

Maybe you are looking for