Installing Veritas SF on Solaris 10 5/08 - perl - cannot execute
Hi all,
I have been trying to install the Storage Foundation on a Solaris 10 5/08 box. Running ./installer from the DVD gives me quickly the following error message, 3 repeated lines (referring to file/folders on the DVD):
./installer: ./perl/SunOS/perl/bin/perl: cannot execute
./installer: ./perl/SunOS/perl/bin/perl: cannot execute
./installer: ./perl/SunOS/perl/bin/perl: cannot execute
After installing Solaris I updated it and installed the companion programs. I also compiled and installed the more recent perl 5.8.8.
Does anyone have any idea why the Storage Foundation is giving me this? All the r/x. rights are in place.
Best regards
Hi,
Why aren't you just unzip the file locally, on your target server? It shouldn't use a lot of space.
Regards,
catalin.
Similar Messages
-
Installing spam assassin on solaris 9
I'm getting "optional module missing" message while installing the spam assassin. And I had so much trouble installing any module perl module on solaris. Maybe someone here knows an easy way to install spam assassin on solaris.
use perlgcc
Perl remembers what compiler was used when it was first compiled, and unless you purchase the Sun compiler, you'll be using "gcc". Sun provides you with a version of perl compiled with gcc, so you can do stuff like you're trying to do..... -
Installing Veritas on Solaris 9
Hi,
I am new to solaris and am having a few problems installing veritas Netbackup 5 on Solaris 9.
The CD mounts fine but when I type in ./install to start the installation I get an error message saying:
install: not found
Any help would be appreciated
ThanksI type ./install whilst in the cdrom's working directory:
/cdrom/veritas/
the install file is within this file but does not run when I type # ./install -
Does solaris cluster 3.3 need to install veritas vxvm software?
hello buddy
I read the document for solaris cluster 3.3 , and see it need to install veritas vxvm.
why need veritas vxvm if I have solaris cluster ?
ThanksYou need to use either Solaris Volume Manager, or Veritas Volume Manager. With clustering you need a disk manager that is cluster aware, iow, it needs to know that one disk can be accessed by more than one server at a time.
Have a look at chapter 3 in the Cluster installation manual for the steps to use Solaris Volume Manager. It's iportant to use the /dev/did disk names
http://www.oracle.com/technetwork/documentation/solaris-cluster-33-192999.html -
How to install veritas volume manager in zones
Hi folks,
I wanna learn veritas volume manager. Is it possible to install VXVM packages on solaris Zones? how can i create virtual disk? Is there any simulator for VXVM for solaris. ?
Thanks in advance.See [http://sfdoccentral.symantec.com/sf/5.0/solaris/html/sf_install/ig_ch_install_sol_vm_fs4.html|http://sfdoccentral.symantec.com/sf/5.0/solaris/html/sf_install/ig_ch_install_sol_vm_fs4.html]
"On Solaris 10, the packages must be installed while in the global zone" -
I am getting this same error on install of 9201 on Solaris 9 ; ld is core dumping - I have all of the required packages so I can't figure out why linking is failing, can anybody please give me a fix?!!?
Calling action unixActions2.2.0.6.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName = /opt/oracle/product/plsql/lib/ins_plsql.mk
installTarget = install
undoMakeFileName =
installArguments = ORACLE_HOME=/opt/oracle/product,
/opt/oracle/product/install/make.log
undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mk
Exception Severity: 1
*** Cancel Dialog: ***
User selected: Stop installation of all products.
Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mkHello,
a) Please crosscheck your environment variables and make sure you have access to all binaries/executables.
Ex: make etc.
b) Make sure you OS is patches as per oracle requirements.
<<Message>>
Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mk
Indicates that you may not have access to execute make utility.
-Sri -
Error while installing Oracle 10g on Solaris 10.
Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh BhaleCheck also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp -
Hi
I know that we can install Oracle 8i on Solaris 8.
Can we install oracle 8i on Solaris 10 ?
What is the last solaris version that supports installation of Oracle 8i?
ThanxMetalink Certification Matrix shows that Solaris 9 was the last one.
HTH
RK -
When trying to install jdk-1_5_0_13 on Solaris geting file is corrupt.
I am trying to install jdk-1_5_0_13 on Solaris 10 using the following downloaded files from Sun Archive site
jdk-1_5_0_13-solaris-sparc.sh and jdk-1_5_0_13-solaris-sparcv9.sh
When tried to install using these self extracting files
It gives error file is corrupt after accepting the licencing agreement. We have already tried after downloading twice and it give the same error.
Please could someone explain
1. Is the set files at the site really corrupt ?
2. Or is there something else, like instructions given at the site are not 100%
3. How to make it work?
Has any one installed jdk_1.5.0_13 recently on Sun Solaris using self extracting files and it worked?
Your help will be higly appreciated.
Thanks
Edited by: SatishKainth on May 1, 2008 4:51 AMFirst make sure that you are logged in as "root", or use su [root password] to be logged in as.
And then try all that things again. -
Installing Oracle 8i in Solaris Intel Version With Pentium 4
Hi Guys,
I am trying to Install Oracle 8i under Solaris 8 Intel version with Pentium 4 processor fixed.But iam'nt able to continue after I click "Install" button,the runInstaller exited badly with no response.I was told that even Installing Oracle under Windows P4 is facing the same problem,but on searching I got solution by renaming a DDL file before starting installation.Is there any similar method to do for installing it under p4 processor on solaris intel 8 version.Dear Mr. Kumar, i am chandrasekaran from singapore, actualy i need your help regarding the intel sun os oracle. I have Intel Based SUN OS, but i try to get Oracle CD Any version either 8i or 9i for intel sun os.
One of my friend have the cd but it already damaged so that i need your help.
My address
S.Chandrasekaran, Blk 84 #07-93, Commonwealth close, Singapore 140084. If you have the cd you make one copy for me and send by post. Thank you
My email id: [email protected] or yahoo.com
by chandran.s -
Installing Oracle 9i in Solaris 10
Hi
I have a server having OS Solaris 10 SPARC Edition 64 bit. I want to install Oracle 9i client in that server. I have seen in many forums ppl saying that Oracle 9i is not compatible with Solaris 10 and there are some issues related to patches.
Can anyone help me in this matter.
Thanks and Regards
Abhishek VermaThanks for your replies guys.
I successfully installed Oracle9i client in Solaris 10. Initially I had to set up the Kernel parameteres as Prajeevan has suggested. Later the installation was quite staright forward and same as for Linux server.
Thanks for giving your precious time for replying to my query. -
Can not Install application Flowtherm on Solaris 10 "Cannot execute" error
I am trying to install one application Flowtherm on Sun Solaris 10.
when I tried to install the bin file
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installtion resources from the installer archive...
Configuring the installer fro this system's environment...
Launching installer...
./install_solaris.bin: /tmp/install.dir.982/Solaris/resource/jre/bin/java: cannot execute
This is a new SUN ultra 20 machine acquired before a month with Solaris 10 OS. I tried to re install the new JRE after downloading from the SUN website. Please let me know what should I do..
sanjayHi,
please see metlink certify tab: http://metalink.oracle.com
I think u cannot install 8i on solaris10.
Regards,
Xaheer -
Installing JDS 3 on Solaris 10 SPARC previously running CDE
Does anyone have experience of installing JDS3 on SPARC architectures? Most of the posts seem to relate to x86. I'm having trouble installing JDS3 from the Solaris 6/06 distribution.
I have a jumpstart config which starts with a SUNWCrnet and adds the minimum to provide a CDE with XDM log in. We thought we'd try JDS3 so I've expanded the profile to include all packages in the Sol10 6/06 distribution which are marked as belonging to the GNOME2 or JDS3 categories.
This gives the option for selecting JDS from the login session menu. The desktop comes up ok but then we get error messages:
'Failed to execute child process "xscreensaver" '
Attempting to start any application from any menu results in the following message:
'Cannot launch entry
Details: Text was empty (or contained only white space)'
I can't even open a terminal.
It looks like a major piece of configuration data is missing but I'm not sure where to start looking.
Any help for an old SPARC head gratefully received.Xscreensaver needs to have both /usr/openwin/bin and /usr/X11/bin in the user's $PATH. Add the line:
PATH=$PATH:/usr/openwin/bin:/usr/X11/bin
in your .profile and that should do it for you. -
Problems installing oracle10g database on solaris 10 running on AMD64 3200+
I wanted to install oracle 10g database on Solaris 10 06/06 running on AMD Athlon64 3200+ processor. I downloaded Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (x86-64) from the oracle 10g database download page. It was of 739,713,699 bytes size which is more than a CD could contain (702MB). So I extracted the contents of the zip file on the disk and split them into two parts in different directories as:
Part 1 containing:
1. {split_directory1}/doc .... folder
2. {split_directory1}/install .... folder
3. {split_directory1}/response .... folder
4. {split_directory1}/runInstaller .... folder
5. {split_directory1}/welcome.html .... file
Part 2 containing:
1. {split_directory2}/stage .... folder
I then burned them into two separate disks as compressed zip files
one of size 8.05MB and the other of size 697MB.
To install it I first extracted the contents of both the zip files in a common folder with same directory structure. Then i run the runInstaller file.
But an error message is displayed saying:
"./runInstaller: /opt/oracle/install/.oui: cannot execute"
where "/opt/oracle" is the common folder containing the extracted files.
Can you tell me what went wrong and how to install the oracle database correctly.
Presently I do not have a direct internet connection to the Solaris machine and I am quiet sure that I have not missed any file while splitting and burning the on CD.Hi,
Why aren't you just unzip the file locally, on your target server? It shouldn't use a lot of space.
Regards,
catalin. -
Installing JDK1.4 on Solaris
I am having problem in installation of JDK1.4 on Solaris ix86 plateform, when I run the .sh instaltion file its either prompt that the file is corrupted or sometime it is installed successfully without any error but when I run java it gives following error,
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
Any help and suggestion will be highly appriciated,
RegardsYou may be experiencing a conflict with a previously installed Java - the current Solaris 10 comes with 1.5.0_05, I believe.
Maybe you are looking for
-
I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas? Thanks for any help Lou
-
Unable to print to PDF Oversize pages from FrameMaker 9.0 and 7.2
Hi All, I am trying to print to PDF a publication that is full of oversize wiring diagrams. The pages are all images ranging in size from standard A3 and A4 siz sheets through to a foldout being 1470 mm W X 297 mm H. We have no problem printing A3, A
-
Add TWO Edge Animations/Stages to ONE web page (without using oam)
Hi All, This is a bit of a follow on question for those who are adding scalable height/width edge compositions to web pages using the awesome piece of code created by Sarah (http://sarahjustine.com/) and other forum contributors... (attached code bel
-
hi, i try to uninstall macromedia flash player plug-in but it seems there has been a bug on the install, windows doesn't want to uninstall it, can i do it manually to get it out of my windows program list ?
-
Need to uncompress a hash partitioned table
I am working on oracle 11.1.0.7 database on solaris. We had issues loading data into compressed tables, so we are trying to uncompress the tables and their partitions. When I tried uncompressing a hash partitioned table, I am getting this error SQL>