Installing version 11.4.402.278

When I install Flash 11.4.402.278 on a new Windows 7 64bit OS and then open IE9 it freezes. Once I remove Flash or use an earlier version, IE works fine.

Same version, 9.0.8112.16421
This is a clean install. Have a base image of Win7 64bit with, Office 201 (32bit), Standard Acrobat 10.x and Winzip.
I reimage the disk and install the current Flash. I add the computer to the Domain and I login as the god user for the domain and IE9 works fine.
When I log in as a regular user, he is in the local Administrator group at this time, IE9 freezes and will not complete the startup routine. I go in to IE9 and disable the Plugin, then it works. Turn the plugin back on and it fails. Installing version 11.3.x and it works fine.

Similar Messages

New Update -- Flash Player version 11.4.402.278

A few hours ago, I downloaded the latest Flash Player for Windows 7 (Firefox), version 11,4,402,278 from http://www.adobe.com/software/flash/about/ I have Flash Player's automatic update feature disabled, and check manually for updates every few days.
I'm glad to report, so far, that I have not experienced the silent, empty crashes I reported in this post string: http://forums.adobe.com/message/4704326#4704326 that were related to Flash Player's Protected Mode used with Firefox 15.0 & 15.0.1.
(Prior to downloading the update, I re-enabled Protected Mode, since I wasn't sure that the mms.cfg file would be over-written or modified to its default state by the update.)
Hopefully, this has taken care of the issue. If not, I'll post a follow-on message.
Ortho_Fan

Well, it was too much to hope for, I guess. The crash reports started coming in about an hour ago. All empty, and all connected with a site with embedded Flash content. I just re-disabled Protected Mode.
I'm wondering if this is EVER going to be fixed.
OF
(Not a happy camper.)

Deploy of 11.4.402.278 version with .MSI file

After the deploy of 11.4.402.278 version with .MSI file, the Controll panel, falsh 32, tab advanced shows the 11.4.402.278 version.
in control panel, install e remove application, the Flash version is always the preview 11.4.402.267 version.
So i can't obtain a correct report with SpiceWorks(a scan network software)because the installed version remain the 11.4.402.267.
If i install Flash 11.4.402.278 manually with the .exe files, in the installed application i find two versions installed and i must remove manually the 11.4.402.267 version.
Before the 11.4.402.278.msi release everything worked well.
For the deploy i use the Kaspersky Security Center Consolle.
Any ideas?

yes, it is September 17.
it seems to be an error in the installer written version because the Flash control panel shows the right version.

Adobe Flash updated latest--11,4,402,278--Is Constantly Crashing & I do sens Report Every Single Time-What's going on?

I have just updated my Adobe Flash to latest version (11,4,402,278) b/c of numerous crashing problems. Since I have installed the new version it's crashing even more. And, yes I have done all the install-uninstall with last version & it didn't work then. It's not just with videos, it's with anything, article I'm reading,etc. Am tired of waiting from seconds to many minutes for the gray frown guy to come on to send crash report. And by constant I mean like 5x's in last 45min. I would think with the Numerous reports I send in someone could email me as to what to do.

Date Submitted
This is just from today:
bp-7565c29b-8a3a-4d01-af9b-4e841212100410/4/20125:37 PMbp-a73dd1f6-c766-4318-b598-b143e212100410/4/20125:37 PMbp-2f24fac7-1f40-4cd9-badb-b192c212100410/4/20124:53 PMbp-95137e95-ab44-44cd-9917-80930212100410/4/20124:53 PMbp-5fea3ba4-3637-4a09-b789-9b8e1212100410/4/20124:27
PMbp-03c4fdd5-2c52-46d0-8295-18c58212100410/4/20124:27 PMcd5d4358-3b63-4218-b47d-ed506fda4e3e10/4/201212:35 PMbb3bb0de-e9b9-4905-b208-a77d1da7409710/4/201212:35 PMb54def5f-a993-48c3-ab27-b5f8b72fbe2510/4/201212:34 PM9025e100-6efe-4229-a48a-51177fcbb94610/4/201212:34 PMe082e3ed-9c15-4bf7-a953-2dd5790d6f0c10/4/201212:33 PMcb94b033-a9db-4265-ab44-8469030b613110/4/201212:33 PMda302b59-a892-4885-94d4-906cc49b053410/4/201212:32 PMfd09c889-20bb-44ef-b9be-72f918a3e09d10/4/201212:32 PMbp-bd740eff-4b0d-4786-bc10-e6398212100410/4/201212:25 PMbp-f65a38f9-e875-4121-9efc-825cd212100410/4/201212:25 PM

"error in script on this page" while trying to install adobe flash player 11.4.402.278

hello, all --
i am a newbie of long standing , so please forgive my ignorance. i plead for mercy from the kind and generous people who answer inquiries here.
i got a notice on my computer that a newer version of adobe flash player was available. the one i had at the time was 11.4.402.265. the newer version was 11.4.402.278. i got to where i thought was the right place and clicked "download." within a few seconds i got a message saying that a "script error" had occurred on the page and did i want to continue running this script.
-- line 1
-- char 12948
-- error, object expected
-- code 0
-- URL http://127.0.0.1:1127/app/_js/adobe.js
it doesn't seem to matter whether i click "yes" or "no" on continuing to run the script. the next thing that happens is that i get a second "script error" notice.
-- line 1
-- char 1180
-- error, 'globalActiveActionItems' is undefined
-- code 0
-- URL http://127.0.0.1:2501/app/_js/adobe.js
it doesn't matter whether i click "yes" or "no" on whether i want to keep running the script. the screen reverts to saying that it is "retrieving install," then i get the second "script error" message again. and to make things worse, i can't get rid of the "retrieving install" screen; it has the minimizer button and the "quit" button (x), but the "quit" button does nothing, so for now i've simply minimized it.
what has happened here? what should i do to fix it? i've tried going back to the beginning and redoing it, but i end up over and over again with the second "script error" message. i've tried making sure that "scripting" is "enabled" under "tools/internet options/scripting," then closing and reopening internet explorer (a suggestion i found in a similar thread), but the same things keep happening.
i am on a dell optiplex 330, windows pro XP/SP3, IE 8.0.6001.18702.
thanks to anyone who has any suggestions for me.
-- susie margaret
[email address removed]

I have the same exact problem
-- line 1
-- char 12948
-- error, object expected
-- code 0
-- URL http://127.0.0.1:1127/app/_js/adobe.js
except
it looks like this being on line 2 and not on line 1
-- line 2
-- char 12948
-- error, object expected
-- code 0
-- URL http://127.0.0.1:1127/app/_js/adobe.js
i know it was only released 3 weeks ago but i hope someone can help, oh and i tried what susie did. it didnt work
thank you for your time

Trouble installing latest Flash 11.4.402.278

I don't know what I'm doing wrong in installing Flash Player 11.4.402.278. I have Windows XP 7, 32-bit, and use Mozilla Firefox. When I download, I save the file, although it doesn't show on Downloads list. It does show up, saved, in My Documents. The Run File box has shown once (I clicked yes), didn't run, so I left-clicked, got Run File, again clicked yes, and got "Only 1 single instance of this application can run". Since I've been trying, I then deleted the one other time the same downloaded file showed up in My Documents, so there's 1 file. Proceeded a step (got through Run file), then got "Certificate of authentication failed." What to do? Thanks.

Download and run the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum]

Flash Player Update 11.4.402.278 (Active-X and Plug in).

I have Windows Vista Home Premium SP 2 and IE9
1.     Browser tells me I have wrong version of Flash Player.
2.     Control panel says I have version 11.
3.     I accept download option and start to download 11.4.402.278 from install_flashplayer11x32ax_gtbp_chrd_aih.exe
4.     at 50% of install it tells me to close IE.
5.     I Close IE and install completes
6.     Web site opens up to tell me my download was successful.
7.     I open a new browser tab, go to my home page (happens to be virgin media). It tells me again I do not have the latest version on Flash Player
8.     Control panel tells me I have version 11 installed.
9.      I go to http://helpx.adobe.com/flash-player.html to check installed version - it shows me a blank box - no flash player version, no OS are displayed!
10.    Flash Player settings manager says I have 11.4.402.278 (Active-X and Plug in) and we go round again.
I have tried to run the file, save and run the file, and restart windows. I have turned on automated Adobe updates.
I have checked this thing up and down and still
1.     Adobe says I have downloaded and installed successfully.
2.     Windows tells me the product is there.
3.     The browser says it is the wrong version.
4.     The Adobe help site can find no version.
5.     I can see no flash content as my player is "not current"
The help page offers check (and shows me nothing) - install (won't run if browser is open but tells me it has installed after I close the browser) - and solve issues (if it actually identified the issues above and helped me solve them wouldn't that be something!)

Check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968
[topic moved to Flash Player forum]

Adobe Flash 11.4.402.278 causes browser lockups & erroneous download requests

I've installed Adobe Flash Player 11.4.402.278 on multiple Windows 7 Pro computers. After the install, various websites (i.e. MSN.com, Yahoo, YouTube) lock up when trying to open. This problem occurs in both IE9 & Firefox. The workaround in IE9 is to disable the Adobe Flash Shockwave add-on. Secondarily, users repeatedly receive requests to download Flash even though it is already installed. To make matters worse many video files will not play even after the user reloads Flash 11.4.402.278. Does anyone know how to revert to an earlier version of Flash? I didn't have these problems with the previous version (.265, I believe).

>Chris - I've installed 11.4.402.287 logged in as Domain Administrator on the HP laptop, then logged in as the regular user, and web browsing all ok now. So it looks for now the issues I've been specifically experiencing have been resolved. However, I think I will in future incorporate some acceptance testing before I start deploying future version of Flash everywhere!
> quarky422 - In the specific cases I reported I had the described problem and solution that worked for me, and the latest release has hopefully fixed that issue for good. With the plethora of machine configurations out there I guess everyone has unique issues, but my approach is simple: if it worked before something was updated, start rolling back until you identify the cause. It took me a few hours to identify the issue and I went down the wrong track initially (thought it was to do with a web site the customer visited then I also visited on a different computer and had the same problem, but when reports came in from other users I knew that couldn't be the cause). I really thought it was down to a Java update, so uninstalled that and Flash and it worked. On the next machine just removed Flash and it worked, so re-installed Flash while logged in as the user, and it still worked. This link
http://forums.adobe.com/message/4323109 seems to be a fix though I have not tried it as the latest version fixed my particular problem, so may fix yours as well? You don't say if you are logging in as Domain Admin or Local Admin.

Windows 7 + IE9 + Flash Player 11.4.402.278 を制限ユーザで使用中

Windows 7の制限ユーザーで、IE9を使用してブラウジングしていると、ありえないくらい反応が遅いです。
環境は、Windows 7 Pro SP1（2012年9月20日現在、ほぼ全てのパッチを当てた状態）　＋　IE 9　＋　Flash Player 11.4.402.278をインストールした状態。
Windowsをローカルの制限ユーザでログオン、Webブラウジング（URLはhttp://www.yahoo.co.jp）すると、全画面表示が終了するまで5分程度かかる状態になった。
ローカルの管理者ユーザでは、正常にブラウジングでき、Flashを11.3に戻すと制限ユーザでも正常にブラウジングできます。
社内の複数のPCで再現するため、個別環境の違いによるものではないように思います。
どなたか、同じ現象を経験した方、解決法をご存知の方、対処法を教えて下さい。
しばらくは、11.3でいこうと思いますが、セキュリティホールが気になっています。

Hi Pat,
Thanks for the reply. I can see the Flash animation in your link and I'm running the latest version of Flash for Windows 7. I have been over the other two link you posted and:
- All the plug ins are working.
- Shockwave is enabled.
- ActiveX Filtering is disabled.
- All clips on youtube and facebook work fine.
So for all intenets and purposes, Flash is working. The problem I'm having is locating Flash Player on my PC and choosing it to open a program with. How do I open a program/file with Flash?
These are the files I have...

Tried latest Flash version 11.4.402.265, but ?????

Installed Flash version 11.4.402.265 last night (e.g. clean install).
Using Window 7 64 bit and FireFox 13.0.1.
Computer very slow this morning and when I had 2 Flash instances open,it just about died.
Anyone tried this latest and greatest version yet?

I have tried 11.4.402.265 with firefox 15 beta sound is workin but video is like a slide show and disabling hardware acceleration has no difference.Also is hard to shut down a you tube video have to force shutdown ff in windows.
11.2.0.235 is working but this is no solution in the long run.
Hope that adobe can sort out the problem but they dont do anything if nobody complaining.
So my advise send emails atleast one a day to adobe and complain about it and hope couple thousand do the same.
And sorry for my language im not so good in english.
Ps. Installed FF 16 beta and trying soon again.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

I updated to new ios and now it is not syncing properly. How can i revert back to the previous installed version?

I updated to new ios and now it is not syncing properly. New songs are not showing up on the ipod display but when I view the device on my computer, they are in the playlist but there is a dashed circle beside the missing songs. It previously synced perfectly before the IOS update. How can i revert back to the previous installed version?

Downgrading the iOS is not supported by Apple.
Try:
Re: What does the gray dotted circle in iTunes mean?
https://discussions.apple.com/thread/4676111?tstart=0\\
Dotted circles next to songs, won't sync, red circle with square?

I've installed Version 5, but at least once a day I keep getting notices to update to Version 3.1.11. Why? How can I stop these?

I installed Version 4, and then Version 5, and now at least once a day I get a notice to update to Version 3.1.11. I get this on my office computer and also at home. Why is this happening and how can I stop it?

I had to wait until it happened again, but it finally did, and I solved the problem. Boy was I stupid! It wasn't a plugin, it was ''Thunderbird'' 3.1.11. And I never noticed! Thank you all

Can Web Start call earlier installed versions on client machine?

Can Web Start invoke earlier installed versions of the
JRE on a client machine, without invoking a download?
I ask because I have tried to so, unsuccessfully,
using the versions attribute of the j2se element.
In the usenet thread 'Jar test, with 1.4 VM?',
Usenet Message ID:
[email protected]
http://groups.google.com/groups?selm=1170640609.025666.236030@s48g2000cws.googlegroups.com
(follow the Google link at the top, to the thread)
I was attempting to confirm that a Jar file I
was deploying, was 1.4 compatible.
The test failed, because despite that the (1)
user who attempted it had a working 1.4.2 install,
the JNLP file (which declared version='1.4'),
was prompting for a download. The user was
not prepared to do that, understandably -
that was exactly what I was trying to avoid
doing, myself.
Since then, I did further testing locally -
trying to get a 1.5 launch when my current
Java is 1.6 - I have a number of 1.5 versions.
No request for '1.5', '1.5.0_08' or '1.5*' worked
(OK - that last one was just a WAG*), every time
I was prompted for download (which also failed,
as an aside!).
What am I getting wrong?
Do I misunderstand the intent of the j2se element
finding earlier verions? Is it only versions that
were installed by web start?
Is my understanding of how to use the version
attribute, incorrect?
* Where are the detailed instructions on the
allowable forms of the version attribute?
Neither the spec. nor developers guide seem
to go into it in any detail. Some of the forms
I have seen around the forum were (AFAIR)..

version="1.4 1.5+"

version="1.4"

version="1.4.2_13+ 1.5+"FWIW - here is the JNLP I am currently using
for the test, it is 'live and public'..
<?xml version='1.0' encoding='UTF-8' ?>

<jnlp spec='1.0'
    codebase='http://www.athompson.info/family/'
    href='thompson-1.4.jnlp'>
<information>
    <title>Thompson Family Genealogy</title>
    <vendor>Andrew Thompson</vendor>
    <description kind='one-line'>
      The ancestors of William Robert Ramshaw Thompson
    </description>
    <offline-allowed />
    <shortcut online='false'>
      <desktop/>
    </shortcut>
</information>
<resources>
    <j2se
      version="1.4"
      href="http://java.sun.com/products/autodl/j2se" />
    <jar href='genj-applet.jar' main='true' />
</resources>
<applet-desc
    main-class='genj.applet.Applet'
    name='genealogy'
    codebase='./index.html'
    width='300'
    height='170'
    >
      <param name='GEDCOM' value='thompson.ged' />
      <param name='ZIP' value='thompson.zip' />
</applet-desc>
</jnlp>

Using your tips, I was able to find the 1.5
JRE's listed in the Java control panel
(of an XP Pro box) and see they had no
checkmark for 'enabled'.
After enabling 1.5.0_08, I was successfully
able to launch the application (OK - applet
really) using the 1.5.0_08 JRE.
Thanks.
As an aside, I had to specify '1.5.0_08'
exactly to get that JRE. This is fine for
local testing, but sometimes it is handy
to ask others to help test via the web,
and it would be nice if I could make it less
specific (e.g. '1.5', to get any installed
and enabled JRE that is a 1.5 variant)
Do I understand wrong? Should that work,
to specify '1.5' and get a '1.5.0_08' JRE that
is installed and enabled?

I bought a used white flat screen imac (PPC with OS10.5.8. I had to replace the harddrive from storm damage. How can I find/download a full install version of 10.5 to format and load the new hard-drive? Currently comes on with ? screen.

I have a white 17' flat panel g5 imac power pc, I recently bought used. It had OS 10.5.8. Due to a storm the hard drive was damaged and I replace with new hd.
I did not get a system disc or other support discs with the machine. How or where can I find or download a new-install version of OS 10.5 or up to 10.5.8 that will work with the PPC? Thanks.

Call the Apple Store and ask them to sell you a copy, you can then use the combo updater or you can buy a copy on eBay, but make sure it's the black retail copy and not a grey machine specific disc.

Installing version 11.4.402.278

Similar Messages

Maybe you are looking for