Installing version 7 problems

I have the old 20gb, and I just installed itunes 7. I can't open it, and it says"quicktime version 7.0d0 installed, itunes requires 7.1.3 or later, please reinstall itunes." I've tried reinstalling, deleting and reinstalling, etc. , and nothing works. Any thoughts?

okay, let's try this first.
go into Add/remove and uninstall your existing QuickTime.
then remove any leftover QT program files or folders from the PC.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next download and install the Windows Installer CleanUp utility. use it to check for any leftover QuickTime installation configuration information on the PC. if you find any, remove it with CleanUp.
Description of the Windows Installer CleanUp Utility
restart the PC. now do a repair install of itunes. go into your Add/Remove, select itunes, click "Change", and click "Repair".
does that successfully install a fresh copy of QT 7.1.3 on the PC? if so, does your itunes start launching properly again?

Similar Messages

  • TS5376 I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

    I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

    Hi, so did I.  It seems to be a huge problem with everyone.  I opened a folder on desktop and called it target.  I copied all my songs into that folder.
    I uninstalled Itunes completely.  Rebooted.  Then I installed a fresh install.
    I then dragged all the songs back to Itunes and it worked.  I hope that helps. 
    I read an article the other day and apple is suppose to come out with some genius fix for this problem, it really seems to be global.
    Good luck,

  • Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists. Can anyone help please?

    Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists making continued use of this browser very unlikely unless a quick solution is found! Can anyone help please?

    Perform the suggestions mentioned in the following articles:
    * [[Firefox is already running but is not responding]]
    * [[Firefox hangs]]
    Check and tell if its working.

  • HT201442 Please let me install version 6.0.1 for 4g because I suffer from the problem of Wi-Fi

    Please let me install version 6.0.1 for 4g because I suffer from the problem of Wi-Fi
    im
    I am now I can not connect via Wi-Fi Remote
    i wish to respond as quickly as possible

    These are user to user support forums. No one here has the ability to allow installing of specific iOS versions.
    Apple has never allowed downgrading of iOS.
    Troubleshoot the issue using basic troubleshooting from the Users Guide. If the Wi-Fi still does not work then it is a hardware issue and no iOS version can correct that.

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • I've installed Version 5, but at least once a day I keep getting notices to update to Version 3.1.11. Why? How can I stop these?

    I installed Version 4, and then Version 5, and now at least once a day I get a notice to update to Version 3.1.11. I get this on my office computer and also at home. Why is this happening and how can I stop it?

    I had to wait until it happened again, but it finally did, and I solved the problem. Boy was I stupid! It wasn't a plugin, it was ''Thunderbird'' 3.1.11. And I never noticed! Thank you all

  • Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

    Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

    In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
    Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
    I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
    Having 2 versions of ACR will cause problems.
    You have already downloaded DNG Converter 8.7.1.
    Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
    Be aware that DNG converter is a stand-along application and not a plug-in.
    You need to open DNG converter at select the FOLDER that contain your .NEF files.
    Don't open the folder and try to select individual files, it doesn't work that way.
    After converting your D810 files to DNGs you can then open the DNGs in CS5
    The problem is your camera didn't exist when CS5 & its version of ACR was developed.
    i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

  • I am a CC subscriber and trying to update lr5.7 and I am told to got to my CC folder and click on install. The problem is, LR is not in my file. I guess I have been using my original lr that I bought years ago. What now? How do i get lr into the CC file?

    I am a CC subscriber and trying to update lr5.7 and I am told to got to my CC folder and click on install. The problem is, LR is not in my file. I guess I have been using my original lr that I bought years ago. What now? How do i get lr into the CC file?

    Gary116 please remove and reinstall Lightroom by following the steps listed in CC desktop lists applications as "Up to Date" when not installed.  The version of Photoshop Lightroom available through the Creative Cloud Desktop application supports your Creative Cloud Membership.

  • HT1926 Have new generation 6 nano.  Was able to install version 8 of itunes but error reads that this version with Vista needs newer version.  Have tried to install 10.1 but it installs only part way then installs itself part way through.  Help.

    Has anyone had problems downloading itunes 10.1 with the generation 6 nano?  I have
    Windows Vista on my computer.  Was able to install version 8.1 but nano needs newest version. Help anyone???

    The solution Lijoesat posted above worked for me!
    First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
    I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
    I tried to empty the trash bin after but many files was locked and Garageband would still not install.
    I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
    The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

  • Need to reinstall Photoshop CS2 but it can't find a previously installed version so won't reinstall

    Photoshop CS2 told me there was a "major problem" and that I would need to reinstall the software to continue using it.
    So I used the installer CD, but it told me it could not install because there was already a copy installed, which would need to be removed.
    So I removed the old version and tried to reinstall but now it tells me it needs a previously installed version in order to reinstall.
    Adobe "customer service"chat  is 100% useless on this, referred me to the 800 #, been on hold for over 45 miinutes now, and no relevant topics found on "help" forums.
    For a multibillion dollar monopoly, you'd think they could hire a couple of customer service reps but I guess it's all DIY "support" here, so can anyone help?

    So, you are NOT trying to reinstall an upgrade, but a purchased version (not in an upgrade path from one version to the next)?
    If that is correct, there should be no request for a "previously installed version." That only appears when one is installing an upgrade.
    Are you installing from physical media (a DVD), or from a download?
    Sorry, I do not have an answer for you.
    Good luck,
    Hunt

  • CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

    I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information.
    Can anyone please help?

    yellowmledbetter wrote:
    Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
    The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
    The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
    But, here goes:
    Your cameras are newer than your raw converter, so it won't understand them.
    CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
    Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
    All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
    DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
    If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
    All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
    I really should be in bed.

  • After the next updating of the browser to 13th version such problems have occured : 1. At each start of Firefox constantly there comes a window of check of addi

    After the next updating of the browser to 13th version such problems have occured :
    1. At each start of Firefox constantly there comes a window of check of additions on compatibility, that on the previous versions was not observed.
    2. To the homepage at start the page has added (http://www.mozilla.org/ru/firefox/13.0/whatsnew/?oldversion=rv:12.0) or "Ура! У вас стоит последняя версия Firefox."Besides in options the page is not changed.
    I.e. all the things happen after Firefox is updated, but only now it is constant.
    WinXP SP3

    See these articles for some suggestions:
    *https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    *https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    *http://kb.mozillazine.org/Preferences_not_saved
    It is also possible that there is a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.

  • My itunes player on my desktop skips when playing songs. I have re-installed but the problem continues. I have Windows7 64 bit.

    My itunes player on my desktop (Windows7 64 bit) skips while playing songs. I have re-installed but the problem continues. Any suggestions?

    I'm expreriencing the same conditions with the same environment.  Windows 8, iTunes-64 11.1.2.32, iTunes Store with a processing bar up to 80 +/- and the POPUP MESSAGE OF "iTunes stopped working. The error ...."
    I UNINSTALLED, iTUNES WITH NO POSITIVE RESULT.  I CHECKED THE FIREWALL AND IS THE SAME DEFINITION AS THE PREVIOUS ITUNES VERSION.
    My iTunes StoreS from my iPhones ARE OK.
    I'm spending a lot of time of research for WINDOW'S iTUNE with no solutions.... 

  • Was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. help!

    was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. who can help?

    Not easy if vital information is missing. Sometimes it seems like people are using the internet the first time...
    What version of Indesign?
    What OS? "Rights" sounds like Windows
    What is happening when starting it?
    If Windows, where was it installed?
    If Windows, do you have admin permissions?

  • SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

    Hello, 
    Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
    The prerequisites are failing and it is stating the following ; 
    Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
    Data Warehouse  SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
    The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
    All other pre-upgrade tasks have been done. 
    Help appreciated! 

    I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
    I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
    I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
    So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
    service can not be reached.
    [10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
    [10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
    at System.Management.ManagementScope.InitializeGuts(Object o)
    at System.Management.ManagementScope.Initialize()
    at System.Management.ManagementObjectSearcher.Initialize()
    at System.Management.ManagementObjectSearcher.Get()
    at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
    [10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
    [10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
    [10:29:11]: Debug: :**************************************************
    [10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
    [10:29:11]: Error: :
    [10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
    [10:29:11]: Error: :
    [10:29:11]: Debug: :**************************************************
    [10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
    [10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
    at System.Management.ManagementScope.InitializeGuts(Object o)
    at System.Management.ManagementScope.Initialize()
    at System.Management.ManagementObjectSearcher.Initialize()
    at System.Management.ManagementObjectSearcher.Get()
    at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
    [10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
    [10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
    [10:29:33]: Debug: :**************************************************
    So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
    Let's hope this fixes your issue as well, Tubble.
    Have a great day!

Maybe you are looking for