Installing visa 4.6.2 partially breaks network

I installed labview 2009 from dvd and gave it our serial number and activated it twice. After the reboot discovered a partially crippled network,
This means I can ping local ip's and I can dns and nslookup responses,
but browsing outside the localhost is broken. I repeated this install twice, then tried installing only NI-visa 4.6.2 from
a fresh download. This broke the network the same way. This is on win7 32bit. Either a system restore to an earlier point or removing NI-Visa fixes things back up. I have disabled windows firewall to make sure its not related to that.
Is this a possible issue with NI VISA or do I need to look for a problem in this PC ? It shows no symptoms of Viruses or Rootkits that might be
intercepting the TCP/IP stack....

I found the problem was appearing that gateway in network settings was being set to 0.0.0.0, two entries appeared
0.0.0.0
192.168.0.1
if I do a route delete 0.0.0.0 I get an error message (windows not permitted) but then the net comes up.
I thought the remove / reinstall got rid of this but it appeared again after a recent reboot.
This first occured after installing labview 2009 which installs visa.
What do I use visa for?
It seems to be installed with NI Labview 2009 by default, or you can download it and install it separately.
I use the remote system feature which allows me to set visa up on another pc then access it from the PC with the development system on it.
At present the installation was successfull and I have to occasionally do
route delete 0.0.0.0 from a command prompt, then everything works including labview and any of the VI I write or run.
When 0.0.0.0 is in the gateway list, it prevents internet and network apps from accessing anything outside the immediate subnet.

Similar Messages

Hi , i have a 4th gen ipod touch and it runs on 4.3.5 but it wont let me update it to 5.1.1! everytime i try to install it..it says "sorry your network timed out" and wont let me! i tried so many times and it still wont work.. what to do?

hi , i have a 4th gen ipod touch and it runs on 4.3.5 but it wont let me update it to 5.1.1! everytime i try to install it..it says "sorry your network timed out" and wont let me! i tried so many times and it still wont work.. what to do?

Disabling the computer's security software (firewall and antivirus) usually resolves that error.

I installed VISA-RTE and there is only a documentation link in c:\programs\...

I just installed visa-rte on my XP PC. There is only a documentation link when I try to run the program (start, all programs, national instuments, visa). I was expecting a .exe. Is this normal or was there an install problem. Do I need Labview to get anything out of visa-rte? I am try to establish communication between a PC and several DC rectifiers. The rectifier manufacturer pushes VISA-rte and "Power Ten GUI". The "power ten gui" displays some canned screens but I dont see how the VISa-rte enters into it. Please help.

A runtime engine isn't always an executable. Sometimes it's just libraries. Did you also install Measurement and Automation Explorer when installing VISA? That should have created a blue icon on your desktop.
What is "Power Ten GUI"? Is it a LabVIEW app? If so, it's probably using VISA, which is why it requires the VISA runtime.

How to install VISA after Labview and NI-DAQ are already installed

I have Labview 5.1.1 and NI-DAQ 6.6 installed and running properly. I now find that I need to install VISA. Must I uninstall everything (hardware, NI-DAQ, and Labview) and then run the Labview installation again to install VISA? Or can I just go ahead and run the Labview setup again in order to install VISA?

No, you do not need to uninstall any of your hardware or software to install VISA. There are two ways that you can install VISA.
1. You can modify your installation of LabVIEW by going into Add or Remove Programs in the Control Panel, clicking on LabVIEW and selecting Modify (or Change, depending on your operating system). If you have your LabVIEW CD in the CD drive, you can simply enable VISA support in the Installer Tree. This will install VISA on your computer without modifying the installation of any of your other programs.
2. You can also download NI-VISA from our website and install it. You will probably need a reasonably fast internet connection, but this may be the easier way to install it. The URL for the VISA download page is linked below. Ve
rsion 3.0.1 is the newest and works with most Windows operating systems.
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument
Regards,
Mike N.
Applications Engineer
National Instruments

I can't install VISA driver and USB GPIB driver on my PC with VISTA... help me...

I have LabVIEW7 and VISTA, it's ok, but I can't install VISA driver and USB GPIB driver on my pc... it's necessary to connect my pc with instruments? Or LabVIEW7 have this files??? Thanks,
Vanny.
Thanks,
Vanny
Sweet, Beautiful and Young Female Physicist (SBYFP)
(I speak a not very good english, so If U are Italian LabVIEW expert speak in Italian, if U speak in Eglish... please speak easy )
My e-mail for personal contact: [email protected]_NO_SPAM_PLEASE
Solved!
Go to Solution.

You need Administrator privelages to install drivers on Vista
David
www.controlsoftwaresolutions.com

Kernel Upgrade Breaks Network Connection

My server uses:
[15:48] (tunix@kulupler ~)$ pacman -Qs kernel
local/kernel26 2.6.19.1-1
The Linux Kernel and modules
local/kernel-headers 2.6.19.1-1
Kernel headers sanitized for use in userspace
for kernel. The latest kernel upgrade (2.6.19.2-1) breaks network connection after ~5 minutes from the boot. When the network connections fails, kernel says:
Jan 12 15:10:44 kulupler ADDRCONF(NETDEV_UP): eth0: link is not ready
The connection never comes either after a network service restart, nor ifconfig eth0 up/down etc... The only solution is to restart, but after ~5 min. it fails again.
So, as a solution, I just downgraded the kernel to 2.6.19.1-1 again.

The AirPort Extreme base station (AEBS) is putting your PowerBook on a separate subnet. To solve the problem, configure the AEBS so that it does not distribute IP addresses.

Are there any apps that install animated lock screens without jail breaking my iPhone 5?

Are there any apps that can install animated lock screens without jail breaking the iPhone 5?

I don't know of any way, except perhaps by using an animated GIF or PNG as your wallpaper. I've never tried it, though.
I don't recommend jailbreaking your phone, voiding your warranty, and risking ruining the phone just for this feature, however - http://support.apple.com/kb/HT3743

LV 2011 install, VISA quit working

I've been using LV2010 since it was released on a project. Everything worked great. I installed LV2011 Friday
and the PNA I'm using quit responding. Its like its not even in the system.
I upgraded to LV2011 on a different project and the PNA worked fine afterwards.
The error message is something like "Device not present or insufficient location information".
I double checked the address string and went over all of the code. It is exactly as it was before I
installed LV2011.
Also on a side note... I tried the project in LV2010 (from a backup) and now it doesn't work either. I'm guessing LV2011
overwrote something?
I can't post any code, but I'm using the Phase III VI library (I don't remember where I got it, maybe it came with the network analyzer).
That shouldn't be a problem though because the code fails on the 'Open Visa' primitive.
Any ideas?
Solved!
Go to Solution.

Hi Wayne,
This is a known issue being tracked in Corrective Action Request #331189. We have a beta version of the fix we can provide you to validate that our changes fix your particular issue. Please send me a private message so I can provide you with those files.
What OS are you using?
Justin E
National Instruments R&D

LabVIEW built-in file I/O VIs have poor performance on network file I/O operation?

Hi,
I use LabVIEW built-in VIs to save a big 2-D array data into a ascii file (with the "write character to file" vi). When I write it on the local hard drive, it takes about 5 seconds to complete the task. But when I write the file on the network, it takes more than 5 minutes. A typical output file is 5MB big.
If I write the file on the hard drive, and use the built-in File MOVE vi, it takes about 30 seconds to complete the MOVE operation. But if I use Windows File Explorer to move the same file, it takes less than 1 second.
Both the PC and server are connected on a full-duplex 100BaseT network. I tried different file I/O operations (including MOVE, create new file and LIST)
with LabVIEW VIs and compared the speed with windows file explorer. It turned out LabVIEW VIs performance is always A LOT slower than Windows File Explorer. I tried the same test on many different PCs, with windows 98, NT, 2000, and the results are the same.
Is there anyway to improve the file IO performance or is there any other workaround on this issue, such as calling Windows File Explorer to perform the same task via ActiveX maybe?
Your imputs will be very much appreciated. Thanks!
Dan

Hi,
Do the ASCII files have a .txt extention? I've noticed the same behaviour
once, with .txt files. Renaming them (to e.g. .txq) fixed the problem.
I'm clueless why this happend. If you extentions are not .txt, I don't have
a clue...
What if you copy the file, and then delete the original?
Regards,
Wiebe.
"dikrn" wrote in message
news:506500000008000000EA7C0000-1042324653000@exchange.ni.com...
> Hi,
>
> I use LabVIEW built-in VIs to save a big 2-D array data into a ascii
> file (with the "write character to file" vi). When I write it on the
> local hard drive, it takes about 5 seconds to complete the task. But
> when I write the file on the network, it takes more than 5 minutes. A
> typical output file is 5MB big.
>
> If I write the file
on the hard drive, and use the built-in File MOVE
> vi, it takes about 30 seconds to complete the MOVE operation. But if I
> use Windows File Explorer to move the same file, it takes less than 1
> second.
>
> Both the PC and server are connected on a full-duplex 100BaseT
> network. I tried different file I/O operations (including MOVE,
> create new file and LIST) with LabVIEW VIs and compared the speed with
> windows file explorer. It turned out LabVIEW VIs performance is
> always A LOT slower than Windows File Explorer. I tried the same test
> on many different PCs, with windows 98, NT, 2000, and the results are
> the same.
>
> Is there anyway to improve the file IO performance or is there any
> other workaround on this issue, such as calling Windows File Explorer
> to perform the same task via ActiveX maybe?
>
> Your imputs will be very much appreciated. Thanks!
>
> Dan

Problems installing HP Color LaserJet 5550 on Airport network

I've been trying to install my dad's HP CLJ 5550 on our home network for ages.
*This is some background story, skip to the last bit if you don’t feel like reading*
Some months ago, everything was fine and dandy. We had a network consisting of:
The modem from our ISP
The switch from our ISP (I think that's what it was)
1 Airport Express 802.11n
2 Airport Express 802.11b/g
The 802.11n AE was connected to the ISP switch with a standard CAT5 ethernet cable, and that was in turn connected to the modem, and was transmitting the signal to the two other AE's, one connected to our printer with an ethernet cable, the other connected to our home stereo for AirTunes.
Then came the day when our ISP sent us a new modem, this time a wireless router/modem hybrid.
I got rid of the switch and modem and replaced them with the upgrade.
Furthermore, the new ISP router had WiFi built-in so naturally I wanted to take advantage of that, but in the end we ended up having 2 seperate networks, one transmitted by the ISP router and one transmitted by the 802.11n AE (which is connected to the ISP router w/ ethernet cable) to the other AE's.
The ISP router network had great internet performance whatsoever, but I couldn't get the printer and AirTunes working.
The AE network had very shaky internet performance but the network seemed very stable and served AirTunes and wireless printing.
After some time I tried merging the 2 networks, by setting the AEs to join the current network that the ISP router was transmitting. It kinda worked, but we lost all printing.
The printer is crucial to my dad so I suggested getting an AEBS so he bought that.
*SKIP TO HERE*
Now I've set the network up and it consists of:
1 AEBS (802.11n)
1 AE connected to the printer with an ethernet cable.
2 AEs connected to 2 different stereos.
1 ISP router (but this time I've disabled the WiFi!)
The AEBS creates the network, gets its internet connection from the ISP router, and is extended by the 3 AEs. Very fast, stable and AirTunes performs great... But the printer.
I’ve set the printer to TCP/IP and manual config.
The IP adress I’ve set to 192.168.1.150 (in line with the rest of the network)
Subnet mask is set to 255.255.255.0 since that’s what Airport Utility says.
Gateway Adress is set to 192.168.1.1 which I guess is the ISP router? I don’t know. It’s just what Airport Util says. Should it be the AEBS’s adress?
Are there things that I need to disable on printer? On the network? On my computer? Enable? Something? Aaaaargh..
I get nothing from pinging the IP-adress. Back in the golden days it used to recognize it as an HP printer it even checked ink levels and so forth.. Now I can’t even ping.
I’ve tried changing every parameter I can think of.. Adding it as LPD, IPP and HP JetDirect Socket.. (but since I can’t even ping what would I get from changing that?)
That turned out a wee bit longer than I expected...

The Firewalls are disabled and from my laptop you can view all of the shared
Folders on the Desktop with the CP1215 attached via USB.
When I issue the print from my laptop that is on the same network, you see the
print file show up in the CP1215 print queue of the Desktop the CP1215
is USB attached to and then disappears about 15 seconds later. Here is
how it appears on in the Desktop CP1215 Print Queue before it disappears
Doc Name Status Owner Pages Size Submitted Port
E-mail print Printing Guest 1 547 KB 2:00pm 08/26/09 USB003
I've also download/installed the latest drivers. When I reinstall the CP1215 on my laptop from
the Desktop, the "PRINT TEST PAGE works from the Laptop but then all print commands after
that do not work.
I see from my Google search I'm not the only one having this problem
ANY IDEAS what to try next?
Wes

I have an old powerPC G4. dual 867 512 MB. my optical drive is having trouble reading my leopard installer. I was going to try to use remote install but i don't have a network where I can connect both the mac and the windows laptop. any suggestions?

I'm just trying to revive my old PowerPC G4/ dual 867MHz 512MB. Unfortunately I am unable to install from disc since my optical drive, although still working, is somehow not able to read the leopard installer. I wanted to try the remote install option but have limited resources and don't have a network where I can have both the Mac desktop and windows laptop communicate. I read somewhere that I can use a crossover cable to connect the two directly. I'm still trying to see if I can get an external DVD-ROM as another option. Any suggestions?

Your Mac doesn't need a crossover cable, it auto-switches...
http://support.apple.com/kb/HT2274
But I have no idea how that will help you install from a Windows computer.
If you get an external DVD drive it needs to be Firewire & Mac bootable.
Other solution...
http://support.apple.com/kb/HT2274

I installed a HP Officejet 6500 E710n-z (Network) printer but Firefox won't let me print to it: unknown error.

When I attempt to print or print preview I get the following message "An unknown error occurred while printing."

If the printer is connected USB to the Windows 7 machine, what you can do is share it to the network (assuming the XP computer is also connected to the same network). This way the XP machine can see the printer on the Windows 7 computer and install it. The only drawback is that the Windows 7 computer will need to be powered on for the XP computer to be able to see and print to it. I have linked a third party site below for instructions on how to do this.
http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Installing xMII on Laptop not connected with network

Hi,
I have installed xmii in my laptop and created some application which i sent permission to a user created by myself.
When i try to unplug the laptop from the network and try to access xMII its directly going into the home page without asking login. I want a specfic user to be logged in and role it displays in the xMII main page as Local Adminstrator not the Role which was there in xMII.
Thanks,
Bala

look at the list of Trusted Servers in Security Services. If you log in from any of these, you will automatically be logged in as admin. It doesn't matter if you use the hostname or IP. If you find your IP listed as one of the Trusted Servers, remove it, save, and open a new browser window and try logging in again. You need to start a new browser session - not open another window in an existing session.
If you need to have your machine listed as a trusted server and you don't want to be automatically logged in as admin, then you're out of luck. I've tried using the loopback adapter to get around this; in Windows that won't work either because of the braindead way Microsoft implemented the loopback adapter. Your only recourse is VMware or the like...
-tim

Installing Solaris 10 on Sunfire V120 via network boot from Linux

I have been given a free SunFire V120 server loaded with and old copy of Solaris 9. The problem is that this server no longer has the internal DVD/CDRom drive any more. Google'd for finding a replacement CD-Rom drive show cost more than the SunFire V120 unit itself.
The plan: Install Solaris 10 for SPARC on Sunfire V120 Server
Available:
-- Sun Microsystems SunFire V120 Server (1GB of Ram and 2x 36GB 10K RPM SCSI3 drives)
-- CentOS 5.1 Linux Server
-- Solaris 10 SPARC DVD ISO Image
-- DB25 to RJ45 Serial Cable accessing V120 LOM via Minicom application on CentOS 5 server
Via the http://www.docbert.org/Solaris/Jumpstart/linux.html site, I have configured the following:
* NFS Server (nfs-utils under RedHat)
* bootparams server (bootparamd under RedHat)
* rarpd server (rarpd under RedHat)
* tftp server (tftp-server)
CentOS Server Settings:
[root@jsserv ~]# cat /etc/ethers
0:3:ba:36:34:48 jsclient
[root@jsserv ~]# cat /etc/bootparams
jsclient root=jsserv:/jumpstart/sol10/Solaris_10/Tools/Boot install=jsserv:/jumpstart/sol10 boottype=:in
[root@jsserv ~]# cat /etc/exports
/jumpstart *(ro,no_root_squash)
[root@jsserv ~]# cat /etc/hosts
192.168.0.20 jsserv
192.168.0.22 jsclient
[root@jsserv ~]# ls -l /tftpboot
lrwxrwxrwx 1 root root 20 Mar 7 13:35 C0A80016 -> inetboot.sol10.sun4u
lrwxrwxrwx 1 root root 20 Mar 7 13:35 C0A80016.SUN4U -> inetboot.sol10.sun4u
-rw-r--r-- 1 root root 217016 Mar 7 13:34 inetboot.sol10.sun4u
On CentOS Linux server -- under /var/log/messages, the rarpd shows this message:
Mar 7 14:24:41 jsserv rarpd[3516]: RARP request from 0 on eth0
Mar 7 14:24:41 jsserv rarpd[3516]: RARP response to 0 192.168.0.22 on eth0
On the SunFire V120 server, the console displays:
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #53883976.
Ethernet address 0:3:ba:36:34:48, Host ID: 83363448.
Executing last command: boot net -v - install
Boot device: /pci@1f,0/pci@1,1/network@c,1 File and args: -v - install
38e00 Using RARP/BOOTPARAMS...
Internet address is: 192.168.0.22
hostname: jsclient
domainname: (none)
Found 192.168.0.20 @ 0:13:d3:9a:9e:98
root server: jsserv (192.168.0.20)
root directory: /jumpstart/sol10/Solaris_10/Tools/Boot
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]: /platform/sun4u/kernel/sparcv9/unix
boot: failed to allocate 8192 bytes from scratch memory
panic - boot: boot: scratch memory overflow.
Program terminated
So now what do I do?
-- Michael

Anyone know where I can get the firmware (OBP) update / upgrade version 4.22 for the SunFire V120 server?
There is an old thread (http://forum.java.sun.com/thread.jspa?threadID=5137796) that talks of having to update your firmware 4.22.x, but I have looked through the SunSolve site and I cannot find a reference to this firmware any place for the SunFire V120 servers.

Error 1935 when installing VISA 3.2 WITHOUT Framework 2.0 installed

I want to use a NI PCMCIA-232/2 card.
I installed the latest update of NI serial 1.7 for this purpose. (Win XP)
This installs also NI VISA 3.2.
During the installation of VISA 3.2 I got the folllowing message:
Error 1395. An error occured during the installation of assembly component{54AA397D-A0A5-4F84-9740-8753CFB71B5A}. HRESULT: -2147319761.
Continue?
I reply for the installation to continue anyway.
As a result, all my COM ports disappeared from NI MAX and I can not use the PCMCIA-232/2.
I checked in the knowledge base, there is a similar problem reported. But in my case neither Framework 2.0 nor Visual studio are installed.

Josh,
I did check. There is indeed a key concerning Framework in the registry. But it is related to the version 1.1
in the path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\policy\standards\Standard CLI 2002
I have two keys:
- name:"default" type:REG_SZ value: not set
- name:"v1.1.4322" type REG_DWORD value: 4096
But I haven't got any trace of the v2.0.
Damien

Installing visa 4.6.2 partially breaks network

Similar Messages

Maybe you are looking for