Installing Vista under Leopard give Windows error - ATA driver related??

Trying to install Vista under Boot Camp in new Mac Pro running Leopard with 2 serial ATA drives. Wish to install Vista as clean install on 2nd drive. The second drive gets properly formatted as NTSF and is seen by Vista installer. But install quits with error "Windows is unable to find a system volume that meets its criteria for installation." Apple tech support says this is a Windows issue. Microsoft says "if you are trying to perform a clean installation of Vista you must provide the correct drivers . . . select the "load drivers" option." Microsoft also advises to "check website of HDD manufacturer for updated drivers. Apple does not list the manufacturer of its SATA drives. So I am stuck. Any help would be appreciated.

You have to format the volume again in Vista DVD, then restart and boot from DVD again. I've done this a dozen times so far.
It is a Mac Pro issue, I think. I only use x64, so it could be 64-bit Vista related. Also, it seemed to me BCA created FAT32 even though it was evenly divided on 500GB drive. (In the past, it was NTFS, but Vista didn't like it anyway, and it has a later revision of NTFS probably, just as HFS+ has changed and evolved).
If worst comes to worst, pull your OS X drive out entirely. Goes easier that way also.... but still need to format the partition.
I've got Ultimate and Business along with Home Premium, but only first two support dual-cpu / dual-core and full amount of memory. 32-bit on Mac Pro Vista seems to be limited to 2GB of physical memory. So two strikes against x32 Vista on Mac Pro.
This is because there is some support for Xeon and Itanium in Vista for EFI, but MS will offically support EFI (UEFI 2.0) with SP1, and more PC manufacturers will come on-board.
You can find the SATA chipset information, but that isn't the issue.
I liked playing with RC1 a year ago and said "I need to learn more" so I stayed with it. Have to get creative sometimes.

Similar Messages

  • Has ANYONE managed to install Vista under Boot Camp on a second drive?

    As I understand it Vista cannot be installed on secondary drive because of the "Windows is unable to find a system volume that meets its criteria for install" error message when selecting the install location because it needs a Primary Drive.
    In the Microsoft Knowledge Base they recommend removing the primary drive to overcome this but I tried and it failed.
    Do I HAVE to go out and buy XP (which allows installs on secondary drives) and then upgrade to Vista.
    I'm so darn frustrated with this issue I wondered if anyone has managed to do this successfully.
    Thanks
    Aln

    No problems here. I have Vista 64 Ultimate running on a different internal drive, and I didnt remove my primary OSX drive to do this. In fact it worked without a hitch. There must be something you are doing wrong in the bootcamp preparation phase.

  • Hi, I am unable to install new itunes version to windows 7 PC.  It requires application support and gives windows error 2.  I have tried to save on desktop and run as administrator but errors remains, what other options do I have

    Hi, I am unable to install new itunes version to windows 7 PC.  It requires application support and gives windows error 2.  I have tried to save on desktop and run as administrator but errors remains, what other options do I have?

    Hello, hanliefromzaf. 
    Thank you for visiting Apple Support Communities. 
    Here is an article that I would recommend going through when experiencing this issue. 
    iTunes for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Cheers,
    Jason H. 

  • When i am installing Multipoint server it gives following error error code 0xc0000001

    I have download the Multipoint server 2011 evaluation for
    this site. When I installing the server it gives following error. After that I download the WMS 2013 Evaluation even it is also gives the same error. What is the problem this is coming? How can I resolve it?

    As the above poster mentioned, this looks like an issue with the VM setup you are using. Can you share the specs of the virtual machine so we can help troubleshoot where you may be running into issues?

  • I'm trying to install Star Wars: Empire at War (origional) and I'm getting a data2.cab (cycle redundancy check) error. Can this be fixed so I can install this game on my Windows XP virtual drive?

    I insert the CD and it is recognized. Then I enter the game code off the box and it begins to install for a couple of minutes until it gets this error. I can go no further afterward. The Cd is not scratched enough to damage the files on it because I installed it on my Dell XPS laptop just fine.

    I have just now successfully installed this game on my Windows XP virtual drive on my Macbook Pro laptop. It works like a charm. I kept at it and resolved the issue on my own. The CD had to be copied and installed from the file.

  • Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.

    Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.

    MATSHITA DVD-R UJ-857E:
    Firmware Revision: ZA0E
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: To show the available burn speeds, insert a disc and choose View > Refresh

  • Cannot Install Sql Server 2008, Gives The Error "Database Engine Services Failed"

    I cannot install Sql Server 2008 R2 on Windows 8. Tried many times but failed because it gives the error "Database
    Engine Services Failed". Sql files cannot be corrupted because i can install the same setup on Windows 7 and i can connect to databases.
    I tried all the things below;
    * I'm uninstalling everything related with Sql Server from Control Panel/Programs And Features.
    * I'm deleting all the keys related with Sql Server from Regedit.
    * Later i'm restarting windows, and trying to install again. But during the install it gives the error "Database
    Engine Services Failed", install is finishing but when i opened the Management Studio i cannot connect to Database Engine with Sa naturally.
    * My firewall is already closed. And i have not any antivirus software.
    * I gave the permission for port 1433 on firewall.
    Please help me. Why i always take "Database Engine Services Failed" error? I will get crazy cause of that for many days.

    Here's the ERRORLOG file which i found under the folder;
    Microsoft SQL Server/MSSQL10_50.MSSQLSERVER/MSSQL/Log.
    2014-09-27 03:39:40.15 Server      Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64) 
    Apr  2 2010 15:48:46 
    Copyright (c) Microsoft Corporation
    Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
    2014-09-27 03:39:40.15 Server      (c) Microsoft Corporation.
    2014-09-27 03:39:40.15 Server      All rights reserved.
    2014-09-27 03:39:40.15 Server      Server process ID is 5768.
    2014-09-27 03:39:40.15 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '350V5C/350V5X/350V4C/350V4X/351V5C/351V5X/351V4C/351V4X/3540VC/3540VX/3440VC/3440VX'.
    2014-09-27 03:39:40.15 Server      Authentication mode is MIXED.
    2014-09-27 03:39:40.15 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
    2014-09-27 03:39:40.15 Server      Registry startup parameters: 
    -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
    2014-09-27 03:39:40.15 Server      Command Line Startup Parameters:
    -m SqlSetup
    -f
    -Q
    -q Turkish_CI_AS
    -T 4022
    -T 4010
    -T 3659
    -T 3610
    2014-09-27 03:39:40.18 Server      Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically.  After
    the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
    2014-09-27 03:39:40.18 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2014-09-27 03:39:40.18 Server      Detected 4 CPUs. This is an informational message; no user action is required.
    2014-09-27 03:39:40.31 Server      Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
    2014-09-27 03:39:40.32 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2014-09-27 03:39:40.43 Server      Node configuration: node 0: CPU mask: 0x000000000000000f:0 Active CPU mask: 0x000000000000000f:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
    only. No user action is required.
    2014-09-27 03:39:40.45 Server      Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No user action
    is required.
    2014-09-27 03:39:40.45 spid7s      Warning ******************
    2014-09-27 03:39:40.45 spid7s      SQL Server started in single-user mode. This an informational message only. No user action is required.
    2014-09-27 03:39:40.46 spid7s      Starting up database 'master'.
    2014-09-27 03:39:40.52 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2014-09-27 03:39:40.58 spid7s      SQL Server was started using the -f flag. SQL Server Audit is disabled. This is an informational message. No user action is required.
    2014-09-27 03:39:40.59 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:40.59 spid7s      Server started with '-f' option. Auditing will not be started. This is an informational message only; no user action is required.
    2014-09-27 03:39:40.59 spid7s      Starting up database 'mssqlsystemresource'.
    2014-09-27 03:39:40.61 spid7s      The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
    2014-09-27 03:39:40.94 spid7s      Password policy update was successful.
    2014-09-27 03:39:40.94 spid8s      Starting up database 'model'.
    2014-09-27 03:39:40.95 spid7s      Server name is 'CAGATAY'. This is an informational message only. No user action is required.
    2014-09-27 03:39:41.21 spid8s      Clearing tempdb database.
    2014-09-27 03:39:41.21 spid10s     A new instance of the full-text filter daemon host process has been successfully started.
    2014-09-27 03:39:41.24 Server      A self-generated certificate was successfully loaded for encryption.
    2014-09-27 03:39:41.24 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
    2014-09-27 03:39:41.24 Server      Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag
    7806. This is an informational message only. No user action is required.
    2014-09-27 03:39:41.28 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication
    to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
    2014-09-27 03:39:41.28 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
    2014-09-27 03:39:41.70 spid8s      Starting up database 'tempdb'.
    2014-09-27 03:39:41.86 spid7s      Warning ******************
    2014-09-27 03:39:41.86 spid7s      Attempting to change default collation to Turkish_CI_AS.
    2014-09-27 03:39:41.92 spid7s       index restored for master.syspriorities.
    2014-09-27 03:39:41.95 spid7s       index restored for master.sysbrickfiles.
    2014-09-27 03:39:41.96 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:41.96 spid7s       index restored for master.sysowners.
    2014-09-27 03:39:42.13 spid7s       index restored for master.sysdbreg.
    2014-09-27 03:39:42.16 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.16 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.16 spid7s       index restored for master.sysschobjs.
    2014-09-27 03:39:42.17 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.17 spid7s       index restored for master.syscolpars.
    2014-09-27 03:39:42.17 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysxlgns.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysxsrvs.
    2014-09-27 03:39:42.18 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysnsobjs.
    2014-09-27 03:39:42.18 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.syscerts.
    2014-09-27 03:39:42.19 spid7s       index restored for master.sysrmtlgns.
    2014-09-27 03:39:42.19 spid7s       index restored for master.sysxprops.
    2014-09-27 03:39:42.19 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.19 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.31 spid7s       index restored for master.sysscalartypes.
    2014-09-27 03:39:42.31 spid7s       index restored for master.sysidxstats.
    2014-09-27 03:39:42.31 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysendpts.
    2014-09-27 03:39:42.32 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysclsobjs.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysremsvcbinds.
    2014-09-27 03:39:42.32 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysrts.
    2014-09-27 03:39:42.33 spid7s       index restored for master.sysasymkeys.
    2014-09-27 03:39:42.33 spid7s       index restored for master.syssqlguides.
    2014-09-27 03:39:42.44 spid7s       index restored for master.syssoftobjrefs.
    2014-09-27 03:39:42.47 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.48 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.49 spid7s       index restored for master.spt_values.
    2014-09-27 03:39:42.49 spid7s       index restored for master.MSreplication_options.
    2014-09-27 03:39:42.56 spid7s       index restored for tempdb.syspriorities.
    2014-09-27 03:39:42.56 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s       index restored for tempdb.sysowners.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s       index restored for tempdb.sysschobjs.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.59 spid7s       index restored for tempdb.syscolpars.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysnsobjs.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.syscerts.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysxprops.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysscalartypes.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysidxstats.
    2014-09-27 03:39:42.61 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysclsobjs.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysremsvcbinds.
    2014-09-27 03:39:42.61 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysrts.
    2014-09-27 03:39:42.62 spid7s       index restored for tempdb.sysasymkeys.
    2014-09-27 03:39:42.69 spid7s       index restored for tempdb.syssqlguides.
    2014-09-27 03:39:42.69 spid7s       index restored for tempdb.syssoftobjrefs.
    2014-09-27 03:39:42.75 spid7s       index restored for model.syspriorities.
    2014-09-27 03:39:42.75 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.75 spid7s       index restored for model.sysowners.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.76 spid7s       index restored for model.sysschobjs.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.syscolpars.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysnsobjs.
    2014-09-27 03:39:43.00 spid7s       index restored for model.syscerts.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysxprops.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysscalartypes.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysidxstats.
    2014-09-27 03:39:43.01 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysclsobjs.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysremsvcbinds.
    2014-09-27 03:39:43.01 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysrts.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysasymkeys.
    2014-09-27 03:39:43.01 spid7s       index restored for model.syssqlguides.
    2014-09-27 03:39:43.01 spid7s       index restored for model.syssoftobjrefs.
    2014-09-27 03:39:43.02 spid7s      Starting up database 'msdb'.
    2014-09-27 03:39:43.82 spid7s       index restored for msdb.syspriorities.
    2014-09-27 03:39:43.85 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.93 spid7s       index restored for msdb.sysowners.
    2014-09-27 03:39:43.99 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.09 spid7s       index restored for msdb.sysschobjs.
    2014-09-27 03:39:44.12 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.20 spid7s       index restored for msdb.syscolpars.
    2014-09-27 03:39:44.20 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.20 spid7s       index restored for msdb.sysnsobjs.
    2014-09-27 03:39:44.20 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.25 spid7s       index restored for msdb.syscerts.
    2014-09-27 03:39:44.25 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.26 spid7s       index restored for msdb.sysxprops.
    2014-09-27 03:39:44.26 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.26 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.27 spid7s       index restored for msdb.sysscalartypes.
    2014-09-27 03:39:44.37 spid7s       index restored for msdb.sysidxstats.
    2014-09-27 03:39:44.41 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysclsobjs.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysremsvcbinds.
    2014-09-27 03:39:44.42 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysrts.
    2014-09-27 03:39:44.54 spid7s       index restored for msdb.sysasymkeys.
    2014-09-27 03:39:44.54 spid7s       index restored for msdb.syssqlguides.
    2014-09-27 03:39:44.59 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.74 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.85 spid7s       index restored for msdb.syssoftobjrefs.
    2014-09-27 03:39:44.89 spid7s       index restored for msdb.syspolicy_policies_internal.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.sysproxies.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.syscollector_execution_stats_internal.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.syssubsystems.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.log_shipping_primary_secondaries.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.sysdownloadlist.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.log_shipping_monitor_primary.
    2014-09-27 03:39:44.92 spid7s       index restored for msdb.sysoriginatingservers.
    2014-09-27 03:39:44.93 spid7s       index restored for msdb.log_shipping_monitor_history_detail.
    2014-09-27 03:39:44.95 spid7s       index restored for msdb.log_shipping_monitor_error_detail.
    2014-09-27 03:39:44.95 spid7s       index restored for msdb.log_shipping_secondary.
    2014-09-27 03:39:44.97 spid7s       index restored for msdb.log_shipping_secondary_databases.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.log_shipping_monitor_secondary.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysjobs.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysutility_ucp_mi_file_space_health_internal.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysutility_ucp_mi_database_health_internal.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.syscollector_blobs_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_mi_dac_execution_statistics_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysjobsteps.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_ucp_dac_file_space_health_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.logmarkhistory.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_mi_session_statistics_internal.
    2014-09-27 03:39:45.12 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.12 spid7s       index restored for msdb.sysdtscategories.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.syspolicy_target_sets_internal.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysutility_ucp_mi_volume_space_health_internal.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysschedules.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysdac_instances_internal.
    2014-09-27 03:39:45.33 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.50 spid7s       index restored for msdb.sysssispackages.
    2014-09-27 03:39:45.51 spid7s       index restored for msdb.sysutility_ucp_computer_cpu_health_internal.
    2014-09-27 03:39:45.51 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.52 spid7s       index restored for msdb.sysssispackagefolders.
    2014-09-27 03:39:45.52 spid7s       index restored for msdb.sysdac_history_internal.
    2014-09-27 03:39:45.53 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.syscategories.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.systargetservers.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.systargetservergroups.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.syspolicy_policy_category_subscriptions_internal.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.sysalerts.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.sysoperators.
    2014-09-27 03:39:45.63 spid7s       index restored for msdb.syspolicy_system_health_state_internal.
    2014-09-27 03:39:45.63 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.63 spid7s       index restored for msdb.syscollector_config_store_internal.
    2014-09-27 03:39:45.65 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.65 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.65 spid7s       index restored for msdb.sysmanagement_shared_server_groups_internal.
    2014-09-27 03:39:45.66 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.sysutility_mi_smo_properties_to_collect_internal.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.sysmanagement_shared_registered_servers_internal.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.syscachedcredentials.
    2014-09-27 03:39:45.79 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.79 spid7s       index restored for msdb.syscollector_collection_sets_internal.
    2014-09-27 03:39:45.79 spid7s       index restored for msdb.sysutility_ucp_dac_health_internal.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.MSdbms.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.MSdbms_datatype.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.sysmail_profile.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.sysutility_ucp_managed_instances_internal.
    2014-09-27 03:39:45.83 spid7s       index restored for msdb.syspolicy_management_facets.
    2014-09-27 03:39:45.84 spid7s       index restored for msdb.sysutility_ucp_mi_health_internal.
    2014-09-27 03:39:45.86 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.86 spid7s       index restored for msdb.syscollector_collector_types_internal.
    2014-09-27 03:39:45.86 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.86 spid7s       index restored for msdb.syspolicy_configuration_internal.
    2014-09-27 03:39:45.87 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.87 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.syspolicy_facet_events.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.sysmail_account.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.syspolicy_conditions_internal.
    2014-09-27 03:39:45.88 spid7s       index restored for msdb.sysutility_ucp_health_policies_internal.
    2014-09-27 03:39:45.88 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.88 spid7s       index restored for msdb.syscollector_collection_items_internal.
    2014-09-27 03:39:45.90 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.00 spid7s       index restored for msdb.sysmail_servertype.
    2014-09-27 03:39:46.00 spid7s       index restored for msdb.sysutility_ucp_filegroups_with_policy_violations_internal.
    2014-09-27 03:39:46.02 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_policy_check_conditions_internal.
    2014-09-27 03:39:46.03 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_configuration_internal.
    2014-09-27 03:39:46.03 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_policy_target_conditions_internal.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.sysmail_server.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.syspolicy_policy_categories_internal.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.syspolicy_object_sets_internal.
    2014-09-27 03:39:46.04 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.sysmail_configuration.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.sysdbmaintplan_databases.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.log_shipping_primary_databases.
    2014-09-27 03:39:46.39 spid7s      The default collation was successfully changed.
    2014-09-27 03:39:46.39 spid7s      Recovery is complete. This is an informational message only. No user action is required.
    2014-09-27 03:39:47.17 spid51      Changed database context to 'master'.
    2014-09-27 03:39:47.18 spid51      Changed language setting to us_english.
    2014-09-27 03:39:47.72 spid51      Setting database option RECOVERY to FULL for database model.
    2014-09-27 03:39:47.84 spid51      Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.84 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:47.98 spid51      Configuration option 'default language' changed from 0 to 0. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      Configuration option 'default full-text language' changed from 1033 to 1033. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:47.98 spid51      Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:48.27 spid51      Error: 15007, Severity: 16, State: 1.
    2014-09-27 03:39:48.27 spid51      '' is not a valid login or you do not have permission.
    2014-09-27 03:51:25.13 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:51:25.13 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:51:32.67 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:51:32.67 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:51:42.11 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:51:42.11 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:52:42.07 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:52:42.07 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:53:01.23 Logon       Error: 18461, Severity: 14, State: 1.
    2014-09-27 03:53:01.23 Logon       Login failed for user 'CAGATAY\cagatay'. Reason: Server is in single user mode. Only one administrator can connect at this time. [CLIENT: <local machine>]
    2014-09-27 03:53:17.57 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:53:17.57 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:53:32.54 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:53:32.54 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:04.29 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:54:04.29 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:10.36 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:54:10.36 Logon       Login failed for user 'CAGATAY\cagatay'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:47.18 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:54:47.18 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    Resolve the error, please refer to the following links.
    Enable DAC:http://www.mssqltips.com/sqlservertip/2538/enabling-dedicated-administrator-connection-in-sql-server-2008-express-edition/
    could not register the SPN Kerberos:
    http://saveadba.blogspot.com/2012/03/could-not-register-spn-kerberos.html  
    Make sure the password of sa is correct,and the login 'CAGATAY\cagatay' has been created in SQL Server

  • Can I install both Snow Leopard and Windows 7 on the same version of VMWare 5?

    Even though I am running Apple OSX Mountain Lion 10.8.3 on my new 2013 iMac, I have just installed VMWare's "Fusion 5" so I can have Windows 7 installed on the "Fusion 5, for limited usage needs.
    I also would like to have a running version of Snow Leopard available to run my large collection of original Lynda.com training DVD's and CD's ... which unfortunately, now only allow the Lynda.com GUI player to operate in (and up to) Snow Leopard (at least this is what the Tech folks at Lynda.com have told me).
    Since Lynda.com is no longer producing any or their training programs on CD or DVD any longer, and because they have stopped supporting their training programs to run on Lion and above, I will have to have a version of Snow Leopard installed to run these training programs, and still be able to run them using the Lynda.com GUI player.
    So here's my dilemma:
    1.  Can I install both a version of Snow Leopard OS on my "VMWare "Fusion 5" .... along with a running version of Windows 7 on       the same "Fusion 5"?
    2.  Do I install only the Windows 7 on the VMWare, and find some other "device" to run a version of Snow Leopard off of?
    3.  Do I consider using "BootCamp", in conjunction with "Fusion 5", to get access to both Snow Leopard and Windows 7?
    Has anyone had any experience installing BOTH a previous (older) version of Apple OSX  ... AND ... a Windows OS version on one installed version of VMWare "Fusion"?
    OR
    Any suggestions on how to set up having access to both Snow Leopard and Windows 7 .... while keeping OS Mountain Lion as my main OS?

    mende1
    Thanks ... the "You have to purchase Snow Leopard Server" I knew about, and a few days ago I just ordered a copy from the Apple Store:
    Snow Leopard Server - Ordered at: 1-800-692-7753 ... OR ... 1-866-254-8313
    I asked for Apple Snow Leopard Server (Model MC588Z/A (SLSVR)
    "Unlimited Client License"
    It was around $25.50 (USD) with sales tax and shipping (NYS).
    One thing though ... when you mention:  "you should make two virtual machines".
    Not being too familiar with "Fusion 5" yet, Is setting up "two machine" all done under one installed version of "Fusion 5"?
    Would you have "links" to any "Fusion 5" installation instructions/info for setting up the
    "two machines" (one for Snow Leopard and one for Windows 7)?

  • Erratic pointer:  right clicking in VISTA under Leopard Bootcamp

    Hi! This is my first post, so please be gentle! I have searched the forums and, although I can find many similar threads, I haven't been able to locate an identical one to this. Or, more importantly, a solution.
    I have the 2.16ghz, Black MacBook which came with Tiger installed. I had been using VISTA under Bootcamp Beta for some months with no problems. I recently ungraded to Leopard (keeping all my original settings etc), upgraded the Bootcamp drivers and everything was still working fine.
    Since upgrading to Leopard I had felt that the Mac OS was a little slower in certain areas. Nothing severe, just mainly the time to display the contents of a folder could take a couple of extra seconds. A few days ago, I thought I would start afresh and would do a fresh install of both Leopard (erasing and installing) and VISTA. Leopard now runs perfectly. Very smooth and noticably faster.
    VISTA installed with no apparent problems and I used the Leopard disc to install drivers. After they were installed and the machine restarted, VISTA gave me a problem retort saying certain drivers were not installed (iSight, null issues etc...etc...), although they definitely had been. I noticed this problem report is mentioned in the Apple trobleshooting questions but in says it may occur before installing the drivers and installation will resolve the pronlem. However, I didn't get the report till after installing the drivers. Anyway, that in itself is not the most obvious problem (as things do seem to be working, mainly).
    My main issue is... When I right-click in certain ares (2 fingers on trackpad and click on button), the pointer "jumps". Sometimes vertically, sometimes horizontally. However it only happens when rightclicking on an item which is part of a list or number of options. For example, if I open the GAMES folder in the start menu and try to right-click on Solitaire, the pointer will jump making it impossible to make a selection. The same problem will occur when selecting from a list of items in a folder. I can right click on the desktop with no problems.
    VISTA worked perfectly under Bootcamp BETA and under Bootcamp 2.0 before erase and install. I have tried to install an old trackpad driver from Bootcamp BETA that I found on another forum but when I try to install it, I am met with "...you already have the up to date driver" and it will go no further.
    Can anyone help?

    Do you know how to remove a driver (may need to do a Safe Boot for some), reboot, and install the driver you want.
    Sometimes, maybe during testing? maybe the presence of the older driver first, and then update.
    Meaning that having the older drivers from 1.3 etc, then apply the 2.0 Apple drivers, works best. Remove, install, see how that goes, and maybe then apply 2.0 drivers if you want (I'd wait and see how it goes).
    Also, you might want to look into cloning and backing up Vista. I can say that Acronis TrueImage looked good, but eventually learned hard way they don't yet support Mac (EFI/GPL parttitions). So I use Norton Ghost 12. WinClone is working on an update for Leopard.
    Might want to send feedback to Apple about BootCamp which is always useful and helpful.
    Just a guess/hunch.

  • Installing Vista then upgrading to Windows 7

    I just installed Lion and it seems to be doing fine.  I wanted to install windows 7 with bootcamp, but I bought an upgrade version because I have my Vista disc.  Then I wanted to upgrade since it saved me $70.  Anyway, at this point bootcamp assistant is only asking me if I want to install windows 7.  How do I go about installing Vista, then windows 7?

    If you already owned Vista you CAN use the UPgrade version of Windows 7.
    It'd of been a lot cheaper if you were to search a bit first?
    Legally any ways, as long as it's the same "Version" as Vista. You can't upgrade from Vista Home (or whatever) to W7 Pro. In Lion you just install the W7 upgrade and authenticate afterwards, it won't ask for another OS like XP or Vista. Microsoft had to have some way for XP users to upgrade, tho via a clean install only. With a clean install of W7 you just install it once, don't update or authenticate yet, then just re-install over the new install then you can authenticate and update.
    Apple doesn't authenticate for Microsoft so it doesn't know if you have a legal prior copy or a pirate copy. It normally wouldn't care what you had except Apple dropped support for XP and Vista with Lion and BC 4.0 and that's why BCAssistant will only look for a W7 OS.
    Oh well, have fun.......

  • Spiceworks remote agent install on old computers gives installation errors

    Hi,
    I am receiving the following installation error when installing the remote agent on windows XP computers with older processors.
    Any suggestions on how to fix this? All would be appreciated!
    This topic first appeared in the Spiceworks Community

    Update: In the middle of the OSX installation from DVD1, the MBA says it forgot the WPA WLAN keys and it would like me to re-enter it. So I re-enter it, but it says it was wrong. So I tried it with another Y-Z keymapping switch, and that worked. The OSX installer on MBA silently changed its keyboard layout mapping during installation......
    What I nightmare.

  • I have installed license captivate 6 but when i going to instal neo content its give me error

    When i run update for Neo voices its give me error update fail

    Error Code - U44m2i218

  • Could someone help me quickly, i put in new harddrive, lion is installing, but snow leopard cd is in my drive - will this cause problems?

    the harddrive on my 2008 24" imac died, i purchased a new harddrive and my husband installed it with no problem.  i had some misinformation that i would have to reinstall snow leopard and then i could upgrade to lion.
    i turned on the computer put the snow leopard installation cd in the drive, then my computer opens to the pewter gray linen looking screen and i see that i can install lion from there.  i used the disk utility and erased the new drive, and  reformatted and then i went back to the install lion screen and lion is downloading with no problem, BUT that snow leopard cd is in my drive and i can't eject it.  is it going to give me problems when the computer automatically reboots?  will it try to reboot to that cd instead of continuing with the lion install?  can i hold down my mouse to eject it when it reboots or will that mess up the installation?
    confused, and i have an hour and 33 minutes to figure it out before it downloads.  panicking here.
    any help would be appreciated!

    thank you for answering so quickly, i was really concerned that the computer would try to boot from that cd instead of continuing with the lion install.  this was too easy, i'm used to windows installation which is complicated.  i should have known apple would have made it simple for me. thanks again for the help!

  • G4 error: ATA Drive claims FLUSH CACHE EXT

    Hello,
    I have three Mac at my home. On of these, my G4/450 with 120GB HD and 512Gb RAM, some days ago doesn't start. Appear boot gray screen with Apple's logo and not continue with the boot.
    If I start in Super User mode with Command-S at the start I see this error:
    _*WARNING: ATA Drive claims FLUSH CACHE EXT feature support but does not claim Extended LBA feature support*_
    How can I solve this problem?
    Thank you and sorry for my bad english.

    Start in Single User mode I have tryed to boot by root user with comand: *su /etc/rc*
    This is the error the system returns:
    *dsFindDirNodes returned -14071, count = 0*
    *dsFindDirNodes returned -14071, count = 2147483646*
    *Couldn't find root user. Sleeping and trying again.*

  • Installing CS5.5 Trial Gives 4 Errors and 2 Warnings

    I've tried installing the CS5.5 Trial on 2 different computers and 3 different installations of Windows 7 Ultimate 64-bit, all with identical results:  The installation completes, and the software seems to work fine, but the installer gives the following 4 errors and 2 warnings:
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 2 warning(s)
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
    WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.6E778DP-1018rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
    ----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
    ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Editor\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Editor\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Flash Player 10 ActiveX: Install failed
    I've run the installer as Administrator, I've run it with my anti-virus software turned off, and I've installed it on a completely fresh Windows installation... but I always get the same 4 errors and 2 warnings!
    What's going on?

    Based on the following kb article it seems you may ignore these errors if your applications are running fine -
    http://kb2.adobe.com/cps/902/cpsid_90243.html

Maybe you are looking for

  • Setting approval level for credit management in SD

    Dear Gurus, I have a case like this: My client would like to use credit management in SD. They have few approval levels for for credit limit release. Exp: With SD has amount under from 1000$, Mr. A has the right to approve and release it         With

  • Page sizes

    I am new to Mac and pages. I use MS word 2007 to create my sermon notes. I set the paper orientation to landscape and select 2 pages per sheet. This works much better than creating 2 columns in landscape orientation. Is there a feature like this in P

  • PDF form with body field wrap

    Can we create a form where the body field carries over to a second page if the first page is full? gbs

  • Configuring WebService Reciever Adapter

    Hi All, I have a scenario like WS->XI->DB.A WebDynPro application shud call a WebService and that WebService retrieves some data from the DB and returns the SOAP response.I was lost in creation of the reciever.Can anyone please help me out in this sc

  • Help with Flash Player 10 download??  Nothing is working??

    Hi everyone, I'm hoping someone can help me, because I'm going crazy about this.  So I'm trying to download flash player 10.  It says I have successfully downloaded it, but I get no animation, and on youtube it tells me I need the latest flash player