Installing Webcam Live! on Windows Vista x64

This will inform all of the poor consumers who bought a camera shortly before vista was released, only to realize that the camera would not work with thier operating system that they would soon update too. I was very frustrated trying to get my "Webcam Live!" to work with windows vista ultimate 64 bit edition so i did some trial and error, trying basically every driver on the site.
step 1: be sure that your camera is unplugged, and you dont have any remnants of other drivers on your system, and download the driver for Windows XP Professional 64 bit located here?http://us.creative.com/support/downl...type=0&x=9&y=7
Step 2: right click the setup?icon and click properties
Step 3: click the "compatibility" tab click "run this program in compatibility mode for:" and select Windows XP (Service pack 2)
Step 4: right click the setup icon and choose "run this program as administrator" proceed with setup. The setup may get hung up, but as long as it gets to 100% before freezing you should still be okay.
Step 5: Plug your camera in?Step6: Open your device driver. In my case the driver installed correctly and that was the last step. you may have to manually install the driver by clicking on the device, clicking update driver, and then point the computer to where it was installed to. this was very frustrating for me to figure out and took me about 2 hours. i hope i saved you some time, good luck.

Maybe you can hel me
Im unable to install itunes 7.0.2 because each time I try to i get an error message saying I have insufficient access to that key...the key being HKEYlocalmachine\software\microsoft windows\...etc, etc. etc...
Can you helP???

Similar Messages

Webcam NX and Windows Vista x64

To whom who can solve this problem,?I have now been testet the Vista x86 and Vista x64. In the x64 it doesn't install my Creative Webcam NX camera. It just finds it as an "unknown device", but in the x86 version it finds it during install and it works fine. Anyone who can help me out here? Because it seems like there will be no development of specific x64 vista drivers for this products. Thanks in advanced?\Thomas Hansen

I sadly have the same issue. It appears that there will be no x64 driver for the Creative Webcam NX. Due to the lack of support, I plan on purchasing 35?different BRAND of webcams for my new computer lab. Creative has lost my business.

Installing iTunes 7.0.2 on Windows Vista X64

Hey guys,
Sorry if this has been covered in the past, I looked over the forum and couldn't find anything on this. However I have a solution for installing iTunes 7.0.2 on Windows Vista x64.
What was happening was that anytime I installed iTunesSetup.exe from Windows Vista x64 it said it couldn't find QuickTime and aborted the install. Well what was happening is that all 32 bit installers now go to the "Program Files (x86)" directory. And the install team at Apple hard coded iTunes Install to look for the QuickTime folder in "c:\Program Files" instead of getting the location provided by the OS ("c:\Program Files (x86)\"). So it blows up when it cannot find the QuickTime directory in the wrong location.
First download QuickTimeInstaller.exe and install QuickTime. (http://www.apple.com/quicktime/download/)
Move the QuickTime folder from c:\Program Files (x86) to c:\Program Files
Then download iTunesSetup.exe and install iTunes. (http://www.apple.com/itunes/download/)
Worked perfectly for me. Let me know if anybody has any problems. I would also like to forward what I found to apple so that they can fix this in the future. Does anybody know a good source to send this too?

Maybe you can hel me
Im unable to install itunes 7.0.2 because each time I try to i get an error message saying I have insufficient access to that key...the key being HKEYlocalmachine\software\microsoft windows\...etc, etc. etc...
Can you helP???

Problems Installing CS3 Web Premium on Windows Vista x64

I was (key word) having problems with my installation of CS3 on my brand new (3 days old) computer with Windows Vista x64. Finally after two days of installing and uninstalling, I called Adobe support. I was pleasantly surprised with how quickly they solved my problem (if only I had called sooner).
Having worked on this for 2 days I have seen and tried everything except of course the cure. So I wanted to put this out there for any one else that is having problems.
The symptoms:
- Everything seemed to install correctly (except acrobat which is another story. you can find lots of post about that.). No errors during installation. And when it finally completed installing, all that was left was to click "finish" which indicated to me that installation was successful.
- Open Photoshop. PS would open and immediately stop working. Vista said it was not responding.
- Open any of the other programs and the little vista circle would spin for 5 to 10 seconds then nothing. Program did not start to open. Just nothing.
The problem: Unbeknown to me (never saw an error message) "Licensing for this product had stopped working". When I described above symptoms tech support went straight to this.
The solution: Download the Licensing Service Update and run it. http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
Once I ran this, Photoshop opened and let me enter serial number and activate CS3.
If after your installation, Photoshop or any of the other programs seem to get stuck or you never get the dialog box to enter serial number, the Licensing Service Update should fix things for you.

wow...thank you so much for this posting. I just got home & followed your steps and now I have CS3 up & running. After 4 days of stressing out, finally someone was able to assist. Why can't the Adobe Experts & Employees on these forums supply this much needed information?????
I seriously understand why people want to get crack versions of this software rather than paying hundreds of dollars like us and avoid all this BS and get no support whatsoever!
Thank you again!!

Can't install iTunes in windows vista x64 (error 0x80070002)

I have been encountering some trouble when trying to install iTunes in my Windows Vista 64-bit PC. When I attempt to install it, it gaves me a HRESULT: 0x80070002 error. I have been looking on the internet for a solution to this and have already tried everything. I also have the same error code when trying to make Windows updates.
I was wondering if there is a solution to this problem or do I have to reinstall my OS to get it right.

I think it would be a good idea to scan for malware as malware often interferes with Windows Update.
Download Malware bytes and run a full scan, there is a free version:
http://www.malwarebytes.org/
In services, check the Window Update service. It should show as "started" and start up type automatic.
The other thing is to run the system file checker:
http://support.microsoft.com/kb/929833
This will attempt to fix problems and if it will not run, that is another clue to the problem.

Daqmx 9.02 on windows vista x64

I tried to install the latest daqmx drivers but it gave me a bunch of errors while installing NI-VISA and a bunch of other products. Eventually it finished installation but now nidevmon.exe does not start.
Here's what I'm trying to do:
I already have Labview 8.6 with daqmx 8.7 installed. I upgraded my application to Labview 2009 with daqmx 9.02 on another machine. Now I want to transfer that application to this Vista x64 computer. I also want to be able to run the older application (built using 8.6). I was hoping I could install 32-bit version of Labview 2009 along with the latest version daqmx and visa and then the upgraded application will work. Is it possible that the installation files were just corrupted? Can I install 32-bit daqmx on x64 vista? I don't really care about the memory usage limit right now.
Solved!
Go to Solution.

Hi abdel2,
DAQmx 9.0.2 should work just fine on Vista
x64. Are you getting an error about nidevmon.exe? Were you getting
these errors on the 64 bit machine? It sounds like you might have a
bad installation. Have you tried reinstalling DAQmx? Have you
restarted since you installed?
Installing LabVIEW on Windows Vista x64 Edition
Regards,
Jim Schwartz

Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

Dear all X-FI members
I have an X-FI Xtreme Fidelity card and install with Windows Vista x64.
. I download the latest driver from Creative SB-XFI Version 2.3.002
2. I download the Media Source CMS5 Version 5.0.38
3. I install both of them
4. I download YouP-PAX XFI2007 Revesion 2 from the web filefont below:
http://files.filefront.com/YouP_PAX_X_FI2007_Rev2/;748043;/fileinfo.html
5. I extract to a folder. inside the folder there is an instruction as below:
Don't click on setup.exe but click on PAXsetup.exe. It gave an error.
6. I cancel and do it again by clicking on Audio(sub-folder) and then click on
setup(sub-folder)and then click on setup.exe. It gives me a table to select.
I uncheck driver box, and click next and go through the rest installation smoothly.
7. After restart computer. The MediaSourceGo pops up and display all features
8. I check THX console with gane mode and entertaiment mode. All works
9. On both Modes, all speakers 2., 4., 5. and 7. can be selected and have all sounds
0. X_FI CMSS-3D is enabled, X_FI Crystalizer is enabled, EQ and Mixer are worked.
. I do not play games so i do not know any thing about Alchemy and game stuffs
2. when you try to change the Speaker mode. You have to click on THX console to do
3. By the way, even the YouP-Pax revision was working well too. I don't see anything different from YouP-Pax X-FI2007 revision 2. They both work well for me.
4. Reminding that. When you install the applications. PleaseDon't click on setup.exe or Paxsetup.exe. But please click on Audio folder, and then setup folder. then you see the setup.exe, please go down and click on setup.exe and please uncheck the driver box and anything you don't want to be install then uncheck them. After that click on next and that is it. Restart computer.
With all the best to all of you.

Thank you for your post a reply RejZoR
I have come back and updtae the driver from YouP-Pax 2007 revision 2, and it was going through well. You are definitely right.
I hope that every one has all things worked well and be happy with what they have bought from creative
many thanks to those who has done a good contributions to the drivers and applications to make them work.

Can't launch Cisco Configuration Professional on Windows Vista x64

The Help is necessary to resole the issue (see subject).
Tech enveronment
Windows Vista x64
Adobe Reader X ver. 10.1.0 (Russian)
Cisco Configuration Professional 2.5
JRE 6 update 27
JRE 6 update 27 (64-bit)
Internet Explorer 9.0.8112.16421IS
While launch CCP popup the message box :
"Unable to read the resource file. The file could be corrupted. Please re-install Cisco Configuration Professional to resolve the issue."
Ones (never popup after) Popup the message box (InstallShield Wizard):
Adode Reader is not present on the PC. It is required to view the PDF file.
Also the message box InstallShield Wizard:
Internet Explorer with javaplug-in version 1.6.0_11   Cheked
Adobe Flash Player version 10                              Cheked
Memory 1 Gb                                                      Cheked
Screen Resolution 1024x768                                Cheked
Cuted _cpinstaller_004.log file:
Product : Cisco Configuration Professional version 1.0
10-4-2011 16:48:31 LOG   : Command line options =
10-4-2011 16:48:31 LOG   : GetOS: OS Windows Vista
10-4-2011 16:48:31 LOG   : GetOSServicePack: service pack 2
10-4-2011 16:48:31 LOG   : GetIEVersion: IE version 9.0.8112.16421
10-4-2011 16:52:51 LOG   : CheckCCPPorts: WARNING 80 is not a registered HTTP port
10-4-2011 16:53:27 ERROR : SetRunAsAdmin: ERROR REG_APP_COMBAT_LAYERS_ROOT could not be created.
10-4-2011 16:53:46 LOG   : GetJavaIEPluginVersion: java IE plugin version 1.6.0_27
10-4-2011 16:53:47 LOG   : GetFlashPlayerVersion: flash player version 10
10-4-2011 16:53:47 LOG   : GetScreenResolution: screen resolution 8
10-4-2011 16:54:14 LOG   : OpenPDFFile: Adobe reader could not be found on system.
10-4-2011 16:56:17 LOG   : OnEnd: installation successfully completed.

Hi,ngoldwat!
Yes, off cource, I've tried to launch CCP with Administartor rights - no success.
I have re-installed CCP under Local Admin and launched it. Great!!! It works! But, one of but, the app does not launch from domain user while I use Run as Administrator. I think the issue in the permission and/or user's profile.
Thanks ngoldwat! You have helped me.

Crystal Reports 2008 in Windows Vista x64 + IIS7 DOESNT WORK!!!!!! HELP!

Hi,
I´m developing an application with Microsoft Visual Studio 2008 and Crystal Reports 2008 Professional
(i´m not using the Crystal Reports 2008 for .Net basic)
As I have Windows Vista x64, my ASP.NET applications run under IIS7, but for my surprise, Crystal doesn´t work under Vista x64 + IIS7. I got the following error:
An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
When I run the same routine in an Windows Application the error doesnt occur. It only happens under Web Applications.
I tested in a Windows Vista 32 bit and there´s no error....
Crystal Reports 2008 does not work in II7 x64 ?
Is there any solution?
Please.... help me!!!!!

Hi Fernando,
Please read and follow the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for future topic posts as yours violates the current policy.
You will need to build your application to run in 32 bit only mode. This note explains how to do it:
[Set app to 32 bit mode|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Jason

Cannot install Photoshop CS4 Trial on Vista x64

Hi everyone,
I got a big problem, I download the Photoshop Extended Trial Version and extracted it without any problem. But when I double-click setup.exe nothing happens. It seems to popup a window, but its gone every fast. When I open the Taskmanager I can see the setup.exe under processes, but nothing happens also after hours of waiting.
My PC:
Intel E8400
4 Gb G.Skill DDR1000
Gigabyte P35-DS3
Gecube HD3780 X-Turbo
Windows Vista x64 Ultimate
C: (NTFS) 94800 MB (18418 MB frei)
H: (NTFS) 61440 MB (27418 MB frei) <--- here I extracted the Folder
What I had tried beforce:
- Installing in safe-mode = same problem
- register jscript.dll myself = same problem
- Uninstall CS3 = same problem
- Using AdobeCS3Cleaner
- Using AdobeCS3Cleaner -> found nothing...
- delete last things of CS3 with TuneUp

Peter,
To avoid complications, I would have uninstalled the trial first, then run the Adobe clean-up script, followed by the installation of the full version using the default location.
This has both a 32 bit and a 64 bit component, installed as follows:
32 bit C:\Program Files (x86)\Adobe\Adobe Photoshop CS4
64 bit C:\Program Files\Adobe\Adobe Photoshop CS4 (64 Bit*)
The 64 bit version will be the default on a 64 bit OS.
In your situation I would uninstall everything related to CS4, run the Adobe clean-up script and start again.
* Adobe should note that
bits have a small
b and Bytes have a big one!

Could not load file or assembly 'Oracle.DataAccess' Windows Vista x64

Ok now here is the funny part, this works fine when i'm developing ASP.NET applications ( i assume that is puts the dev web server into x86 mode), but when im trying to use Oracle.DataAccess DLL in a console application i get a '+Additional information: Could not load file or assembly 'Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.+' error in visual studio when i try and debug and also when i try and run the console app.
Using the latest ODP.NET 11.1.0.6.20, Windows Vista x64 SP1 (all updates installed), Visual Studio 2008 SP1

never mind, figured it out, the Platform target in studio was on "Auto" and was defaulting to x64....

Working webcam instant on windows vista 32bit and 64bit

i been try used the driver software from win xp will working on windows vista 32bit you can try it out and now i am going to try win xp x64bit driver for windows vista x64 i will let you know soon cheers Happy New Years to all

guess the 64bit driver is not working?i can install it with the 64 xp driver, however, vista quits the install because the drivers are not signed..

Error to install Xcelsius 2008 on Windows vista. Error 1935.

I have a big problem, I need install Xcelsius 2008 on Windows vista, but when I install the software apper the nex message:
Error 1935 Error al instalar el ensamblado.
"Microsoft.VC80.ATL,type ="Win32",version= "8.0.50727.762",pubicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"". Consulte Ayude y soporte tecnico para obtener mas informacion.

From a brief Google search, I determined this error message is from Vista. It is not being produced by Xcelsius. You will need to do your own search and determine what is causing Vista to report this error. You can also try installing using instructions for Xcelsius installation on Vista posted elsewhere in these forums.

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

I cannot install itunes on my windows vista

I try to install itunes on my windows vista, it gives me a error

"iTunesSetup.exe não é um aplicativo Win32 válido"
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Install Oracle 9i on Windows Vista Home Premium

I have a problem Installing Oracle 9i on Windows Vista Home Premium, I cant install it because it throws me an error message saying that is incompatible with my version of Windows. It is possible to install it with some patch or something??
Message was edited by:
user599646

The only patch I know of is called Windows XP.
In case you have not done any internet searches on this, even Oracle Database 10g was not compatible with Vista until Oracle applied some heavy patches and re-released it.
And since Oracle9i is officially deprecated (nearest thing to obsolete as to make no difference) I see no reason for Oracle to backport the patches.

Installing Webcam Live! on Windows Vista x64

Similar Messages

Maybe you are looking for