Installing win XP on external esata drive failed

Hello,
I have a problem with a lenovo T520. I installed win XP sp3 on its internal harddrive and it working fine. I have an external harddrive that I connect to the laptop via the eSata port. I want now to install additional win XP sp3 on the external drive to get a multiboot system.
But while setup, and after the first booting screen of windows, a blue screen of death appears with c0000218 unknown hardware error message.
I examined a little bit, and I saw that while win XP is booting it switch off the external harddrive (or reset the eSata port), and I think that what create the problem,
So is there a way to solve this problem.
Thanks for any help!

I'm not sure if you can get it to boot normally out of the eSATA port. With XP on USB installs, you have to get it to load the USBSTOR driver early in boot.
You'd probably get better luck on the MSFN XP subforum with this question.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

Satellite A660 - Cannot install Win 7 using external DVD drive

Hello!
Not so long time ago I asked for help with reinstalling win 7 on my laptop.
The only option was actually to order recovery dvd what I did. Today it arrived.
Problem is or was that some of CDs or DVDs couldn't be read for some reason.
Now it doesn't want to boot from cd it says drive failed.
So what I did I pluged my spare external DVD drive and it booted from that.
However just after few seconds it tells me to set "1st recovery media" and opens the disc in laptop. Tried to insert the disc - nothing, like its not inserted, tried to disable laptops cd - nothing please help

> somehow it feels very strange that company like toshiba doesn't let people too recover it computers using external drives
Sorry kamil but this is not fully correct.
I can remember times when Toshiba released some notebook series without internal ODD (optical disk drive). It was able to recover such notebook using external ODD and recovery disk or recovery USB flash memory stick.
In your case the notebook boots up from the recovery disk because it appears a message saying please insert 1st recovery media and click continue. This means that data could be read from the recovery disk but obviously this is a wrong recovery disk or there is a problem with the inserted disk.
I found interesting document how to create a USB recovery media flash drive from recovery ISO images- or discs (DVDs)
http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm
But if the recovery dvd isnt OK, then this method will not function.
In such case you would need to use a Microsoft installation disk or you could order a new recovery disk from Arvato service.

FiOS HD-DVR crashing since adding external eSATA drive

After the recent firmware update, I added an 2TB external eSATA drive to my FiOS DVR. I'd really been looking forward to this because our DVR had been perpetually 90+% full. After a couple of reboots, the drive was recognized and showed as a second DVR at 0% full in the DVR Status menu. Just to make sure everything worked, I scheduled a bunch of recordings to make sure it was utilizing the new drive.
A few days later, we found that the DVR had erased several of our recordings because it was out of space. Checking the DVR status again, the new drive had disappeared.
After a couple of reboots, it appeared in the status menu again, and the DVR started recording to the external drive. But a few days later, my wife couldn't find the recordings. Turns out it had disappeared again.
This pattern has repeated itself several times over the last couple of weeks. On two occasions, the DVR has completely frozen while we were in the middle of watching something, necessitating a complete reboot in order to watch TV, and interrupting any recording that was going on in the background. Each time, at least 2 reboots has been required before the eSATA drive appears.
Needless to say, this whole thing is a disaster. I spent a ton of money and the result is poorer service quality. What can I do to fix this?

After a few minutes searching I found the link of recommended drives.
http://www22.verizon.com/ResidentialHelp/FiOSTV/Other+Hardware/eSATA/129841.htm
Here's a snipet from that page...
Which Verizon FiOS TV DVRs are compatible with eSATA devices?
The following FiOS TV DVRs are compatible with eSATA devices:
Motorola QIP 7216
Motorola QIP 7232
Cisco CHS 435 HDC
Which eSATA external storage devices can I use with my FiOS DVR?
Verizon recommends the eSATA hard drives below for use with FiOS DVR. Customers choosing to install other drive types will assume the risk of compatibility with FiOS DVR and Verizon will not assist with compatibility or performance issues should they arise.
Western Digital – WDBACS5000EBK-NEVZ – 500GB
Western Digital – WDBACS0010HBK-NEVZ – 1TB
Western Digital Retail – WDBABT0010HBK-NESN – 1TB
I'm not sure why this happened...'Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied.'
I'm assuming that the above drives were the only one tested at the time. We users can add to this list if we want. Anyone game?

Can i install wow on an external hard drive?

Can i install wow on an external hard drive and play it off that, cause im runing out of space on my computer.

If you are going to install WoW to a external hard drive I suggest getting a eSATA external hard drive. There is a noticable drop in performance when trying to use a external USB drive to run games from.

Is it possible to boot to a Windows 7 install DVD from an external USB drive on current iMacs?

On the iMac I'm currently using, a mid-2007 24-inch, it's impossible to boot into a Windows install DVD from an external drive: I can hold down option on boot, and all my hard drives come up, but if the Windows disc is in my external DVD drive, it won't show up. I'll soon be upgrading to a late 2012 iMac, and I'd like to be able to install Windows 7 for a boot camp partition. Since that iMac has no built in drive, I'd like to know if using an external DVD drive will work on that model. I'd like to do that, seems easier than messing around with disk images. But we'll see...

You can use an external optical drive to install Windows without any problem with a Late 2012 iMac.
The reason that you couldn't install Windows from an external optical drive on the 2007 iMac is that it has got an internal SuperDrive, so Apple only allows you to use it to install Windows on your iMac

External hard drive failed, lost music library. Any way to get music library from iPod classic to itunes on PowerBook G4?

External hard drive failed, lost music library. Any way to get music library from iPod classic to itunes on PowerBook G4?

Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

IMovie -Problem restoring events after external hard drive failed.

iMovie 09 – The external hard drive failed where I stored my 2012 events. I do not have a backup copy of these events. I bought a new external drive and named it exactly the same as the old drive. Then I uploaded archived original video clips to it recreating the events. I used the exact same event names. However when I view the projects I made from the original events, I get “this clip’s media file is not currently available”. The file path I created should be the same as the old, so why does the project not recognize the recreated events? Any suggestions what I could try?
If I were able to retrieve and copy the old events from the failed drive to the new drive, would that work?
Has anyone successfully dealt with this problem?

That's a very interesting scenario that you've described. I've been concerned about a potential situation arising where I may need to restore Events from a backup drive. However, your situation is somewhat different in that you've had to re-import the Events to a new drive from an archive.
My main video drive is a Maxtor One Touch III Turbo comprising two 500GB drives set up as a RAID 0. So, effectively it appears as one drive totalling 1TB, with data being written to both drives simultaneously (but not mirrored). However, if one drive fails, the other becomes ineffective as it contains only partial data about imported clips (the remaining data being on the failed drive).
I backup the Maxtor to a portable 1TB drive by cloning it using SuperDuper. My thinking has been that, if the Maxtor fails then a simple rename of the backup drive to the same name as the Maxtor is all that will be required for iMovie to retain the linkages between Events and Projects. I hope this is the case!
I hope you get a solution to your predicament - sorry I can't offer any useful advice!
John

I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download

I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download again

Thanks Dirk,
Tried your suggestion various ways but it had no effect the download button was still greyed out and the install button would not activate will keep trying to find a solution. I dont want to boot from the external hard drive that has Lion on mainly because it is a usb HD and the connection to my wireless modem slows the connection rate and downloading would take about ten hours

Success with adding an external eSATA drive to a Verizon FIOS DVR

August 4, 2012 - Success with adding an external eSATA drive to a Verizon FIOS DVR
I just upgraded from a Comcast DVR to a Verizon FIOS DVR. I upgraded because my old DVR was limited to 500GB (1/2 TB) on the internal drive and the new FIOS DVR allowed for a much larger external eSATA drive. Selecting a viable external drive for the FIOS DVR was easier said than done. The three drives listed on the Verizon web site as compatible with FIOS DVRs are no longer manufactured by western digital and are not available on the market.
The DVR that I received from Verizon was a Cisco "CHS 435 HD DVR" that came with a 500GB (1/2 TB) internal drive. This is one of their "Multi-Room DVRs" that allows other set top boxes (not DVRs) to watch videos recorded on it.
I selected a western digital "WD30EURS" eSATA disk drive because it was a follow on product to one of the three listed as acceptable by Verzion on their web page and it was 3TB in size. I ordered from amazon.com for $170.99. This drive is a "bare drive" so it does not come with an external encloser or a eSATA cable.
According to the Western Digial web site this is a AV-GP drive: "These drives are designed to last in high temperature always-on, streaming digital audio/video environments such as PVR/DVR, IPTV, and video surveillance systems."
http://www.wdc.com/wdproducts/library/AAG/ENG/2178-771131.pdf
I got a "Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD" to hold the drive for $34.39. I chose this one because it does not use a fan that could cause continious noise. The box is made out of metal so it cools itself as long as it is exposed to air (not covered up). This box comes with an external power supply that has a small transformer that plugs into a wall outlet.
Then I needed a eSATA cable. I got a "StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)" for $6.50 and a 3-foot version for $5.90. I went with the longer one so that the cable would be less likely to become accidentally unplugged if I need to move the drive or the DVR. The cables and the drive houseing came from the same Amazon provider so it saved me on shipping. The drive came from Amazon/Western Digial directly but they do not have external housings or eSATA cables on that site.
The total cost was $255.56 including shipping for all these items.
I went with the largest (3TB) drive from western digial's AV-GP line to avoid a future upgrade from a smaller drive to a larger drive. There is no way to copy videos from one external eSATA drive to another drive because they are formatted by the FIOS DVR in a propriatary format. That would mean that any future upgrade would require losing all recorded files during an upgrade. That also means that there is no way to back up the contents of the drive to protect yourself from hard drive failure.
The installer who setup the DVR did not want me to plug in the drive while he was there and explained that I was on my own when I attached this kind of personal device to the DVR. When I plugged in the new eSATA drive it was automatically discovered. I was asked by the DVR if I wanted to format the new drive. I answered yes and within 2 hours the drive completed formatting. I did not watch the boring format so it could have finished faster.
When I started recording new videos they go directly to the external drive automatically and avoids the internal drive. It had no trouble recording two HD shows and playing a recording at the same time. I now have 20 hours of HD video recorded and the 3TB external drive is 17% full. So far my experience with the external drive has been great. No problems or issues. Learning the new remote control, new DVR menu system, and web browser control of the DVR from a laptop is another story. It will take some time to figure out how to make all the new features work.
It took me a while to figure out how to make this work since the verizon web site made useless suggestions and pointed me to products that are not available any more. I could not tell if this really would work until I plugged it in and then I was pleasantly suprised that it did. I have had this working for 3 days without any issues. I hope this post makes it easier for you to add an external eSATA drive to your DVR.
Here are the three items ordered from Amazon to make this work:
Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Driv...
Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD
StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)

You are right. I can only access 2TB of my 3TB external drive. That gives me a total of 2.5 TB counting the internal (0.5 TB) and external (2.0 TB) drives. This is a significant improvement over the just the 0.5 TB internal drive. I have not been able to find a reason for this limitation. Cisco and Verizon do not mention any limits that I can find. I hope that a future BIOS upgrade could provide access to more space but this would probably require me to reformat the drive and lose everything recorded.
I paid $170.99 for the 3 TB WD30EURS drive at amazon. I could have gotten away with spending only $116.99 for the 2 TB WD20EURS drive. Not worth returning at this point so I will stay with it. Makes me glad I didn't buy the most expensive 6 TB external monster drive available from another company.
I bought: 3TB drive: Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Drive WD30EURS by Western Digital
I could have bought: 2TB drive: Western Digital AV-GP 2 TB SATA II Intellipower 64 MB Cache Bulk/OEM Internal Hard Drive - WD20EURS by Western Digital
Details of what I learned:
The external 2 TB drive now has 41 hours of HD video recorded and claims to be 34% full (66% free). My estimate would allow me to have aprox 120 hours of HD on the external drive (2TB) and 30 hours of HD on the internal drive (500GB) for a total of 150 hours of HD. This will keep me happy for the near future.
There is a hidden "diagnostic menu" that is not normally accessible or documented by CISCO or Verizon. This menu has a lot of interesting info on the inner working of the DVR. There was an obscure reference to this menu on another forum.
To access this diagnostics menu:
1) Get the DVR into normal live tv mode (no menu, no guide, no pause ...)
2) Go to the Cisco CHS 435 HD DVR (not the remote control) and press these buttons on the front of the DVR: Press both the Left Arrow "<-" button and "OK" button at the same time and hold them both down for aprox 5 seconds.
3) The "Verizon FiOS TV Diagnostics Menu" menu will appear. The menu can then be used by the remote control.
4) I chose "D03 Memory / HDD" and then "Hard Disk Information" and finally "OK"
A five page disk report appeared. With a little bit of interpretation I discovered:
The Internal Drive is know as "drive 1/hdc1" has 461 GB total space with 454 GB free.
The External Drive is split into two partitions "hdc2" and "hdc3" (aka two mount points).
"drive 2/hdc2" has 1007 MB total with 317 GB free
"drive 3/hdc3" has 1007 MB total with 974 GB free
The normal DVR menu has an "Eject" feature that allows you to stop the external drive and make it safe to remove it from the DVR without losing anything via an unplanned drive removal. This can be found at "DVR" button on remote then "Settings"->"External Hard Drive"->"Eject".

How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.

How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.

The Time Capsule drive is a network drive. You have to mount it on the desktop before you will be able to drag/drop files onto the disk. More tips are in this thread:
https://discussions.apple.com/message/17312017#17312017
.....and then delete them from the Mac to free up space?
The Time Capsule was designed for your backups.
If you move a file to the Time Capsule drive and delete the file from your Mac.....you have no backup.
Your only copy of the file will be on the Time Capsule drive. I would only do this with files that I could afford to lose.
All drives fail. When.....not if....the Time Capsule drive has a problem, you will lose your data.

How can I install ntfs on an external hard drive so that my Samsung Smart TV can see my media files? Or is there a better option?

How can I install ntfs on an external hard drive so that my Samsung Smart TV can see my media files? Or is there a better option?

OS X cannot natively write to a drive formatted as NTFS, nor can it format a drive as NTFS. There are third-party NTFS drivers available on the market.
Just out of curiosity: Even with NTFS, how is your TV going to access the external hard drive? Does the TV have a USB port?

Can I install Bootcamp on an External Hard Drive?

*Bootcamp on External Hard Drive?*
Can I install Bootcamp on an external Hard Drive? I don't see why it wouldn't work. Do I need to install the Mac OS on the external Hard Drive first, then Bootcamp?
Parallels
Another question. Does Parallels allow you to not have to use the "option" key to boot into Windows? I mean if I use Parallels can I use XP or Vista at the same time as my mac applications?
What, (if any) are the drawbacks to using "Parallels"?
*What Options are there...*
Is it possible for Apple to allow users to program a key on their keyboard, when pressed will bring up Windows so they don't have to always restart? I need to switch between Windows and mac OS quite often and it's a real pain to always restart. What options do I have?
Thanks

Hi Paint Guy,
*Bootcamp on External Hard Drive?*
Can I install Bootcamp on an external Hard Drive? I don't see why it wouldn't work. Do I need to install the Mac OS on the external Hard Drive first, then Bootcamp?
By Microsofts Design no Windows can be installed and booted from external HDs. BootCamp just follows this.
However, according to this http://tubeshards.wordpress.com/2006/12/05/install-windows-to-a-macintosh-usb-dr ive/ it can be done.
Parallels
Another question. Does Parallels allow you to not have to use the "option" key to boot into Windows? I mean if I use Parallels can I use XP or Vista at the same time as my mac applications?
What, (if any) are the drawbacks to using "Parallels"?
Parallels is an OS X application which don't need a restart of your Mac to run Windows.
Therefor you can run OS X and Parallels Windows side-by-side.
Main drawback is, that Windows runs not native (on the real hardware) but in a virtualized environment.
While this is more than acceptable for 'standard' Office programs, any program that needs direct hardware access (especially games and 3D-programs) either do not run at all or run at noticeable slower speed.
Also you have to realize that the amount of RAM in your Mac is divided between OS X and Parallels Windows.
*What Options are there...*
Is it possible for Apple to allow users to program a key on their keyboard, when pressed will bring up Windows so they don't have to always restart? I need to switch between Windows and mac OS quite often and it's a real pain to always restart. What options do I have?
BootCamp is no option then, since it needs a reboot everytime you want to switch between OS X and Windows.
Parallels (and VMWare Fusion and VirtualBox, BTW) run alongside OSX.
Thanks
You're welcome. Hope it helps.
Have Fun
Stefan
Message was edited by: Fortuny

Installing Solaris 10 via external CD drive on Dell Latitude D800 Laptop

Hello all, I am trying to install Solaris 10 via external CD drive on Dell Latitude D800 Laptop. After the GRUB menu it begins to load, displaying the " . . . . . ." and hangs about 1/4 way accross the screen. When attempting the install from a DVD instead of a CD the installation hangs on the same screen even sooner. Has anyone encoutered this problem?

Hello Alex,
no, you can't use USB devices on SPARC as boot device.
The OBP (even updated ones) contains only support for the USB keyboard, but none for USB mass storage (which requires a device driver). The integrated USB ports are for slow devices like keyboard and mouse.
Using an external SCSI DVD-ROM works. Another choice is an installation via network.
Michael

If it is possible to install linux on a external hard drive?

If it is possible to install linux on a external hard drive, which can be boot from the my MacBook Pro? the reason I didn't try it is beacause that I don't know what it will do to my internal mac os x 10.5? Will it mess up my boot to my leopard?

it's possible, but difficult. i'm in the middle of trying to get this to work on my MacBook, but not there yet. The best resource i've found is here:
http://ubuntuforums.org/showthread.php?t=510030
from what i've learned so far, in order to be able to boot linux on an external drive, the actual /boot partition must be on your internal drive. osx leaves a small (~130MB) partition unused, which can be used for this.
i think it would be easier to run on a partition of the internal drive, but now that i've started trying the external setup, i really want to make it work.

I'm trying to install Firefox on an external hard drive.

''Duplicate post, continue here - [/questions/768694]''
I'm trying to install Firefox on an external hard drive. Having it start on the external drive in a program files directory is very straightforward but I would also like to have the user files on that drive as well. Those files are typically in a directory similar to the following.
C:\Documents and Settings\xxxxxxxx\Application Data\Mozilla\Firefox
I did have this set up on an older PC but now that I'm setting up a new one, I can't remember just how that was done. Could someone refresh my memory?

The process is quite straight forward, you start the profile manager, create a new profile and in the second step of the create profile wizard click on "Choose folder" to choose where you want to save the user data.
The process of creating a profile is detailed here - [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows Creating a new Firefox profile on Windows - MozillaZine Knowledge Base]. There is a warning about using a non-standard location for the profile (copied from the mozillazine knowledge base)
'''If the folder you select for the new profile contains non-Mozilla files (such as the "My Documents" folder on Windows), your profile data will be intermingled with the non-Mozilla data. This can result in the loss of all of the data in that folder, including non-Mozilla files, if you later delete the profile.'''

Installing win XP on external esata drive failed

Similar Messages

Maybe you are looking for